About order and delivery quantities

I have a number of questions about order and delivery quantities:
1) How can I make a delivery even when there is no order?
2) Where is customization of the controllig mechanism if the quantity of the items can be higher at the in the order than at the delivery or not?
Thanks in advance...

1) How can I make a delivery even when there is no order?
Transaction Code: VL01NO
Delivery Type: LO
2) Where is customization of the controllig mechanism if the quantity of the items can be higher at the in the order than at the delivery or not?
Ideally the Quantity of Order can be higher at Order, compared to Delivery. This is a case of partial delivery. Always ensure that Delivery Quantity = Pick Quantity i.e if Delivery Quantity is 50, but you want to deliver 30, in that case reduce the delivery quantity also to 30. If the quantity is different, PGI will not be allowed.
Regards,
Rajesh Banka
Reward points if helpful.

Similar Messages

  • In Sale Order and Delivery - Inventory should be effect

    Dear Experts,
    i am having a scenario that in sales order and delivery, on material items inventory should not be effected.
    How i can acheive this.
    Please let me know the solution.
    With Regards

    Hi Mr.Rachumallu,
    I am not very sure about your question but if my understanding is right, you can acheive it through the VTLA Tcode and for the Item category of the suitable delivery and sales document combination you need to maintain the pos/neg quantity as "Zero".
    I hope I am helping you.
    Regards
    Vijay

  • How to configure route in sales order and delivery

    Hi friends,
    Can any one explain about Route determiantion steps. It has to take the route automatically in sales order and delivery also.
    i have configured
    shipping condition, transportation group, transportation zone, plant, shipping point determination, actual route by proposalroute.
    Apart from this what are the remaining steps, but it is not picking  in sales order and delivery.
    please any one send the steps for route determination. its very urgent for me.
    Thanks & regards
    Raju

    hi,
    Route is determined
    1.Country of Departure & Departure Zone taken from Shipping Point
    2.Country of Destination & receiving Zone from Ship to party
    3.Shipping condition from CMR
    4.Transportation Group from MMR
    5.Weight Group which is optional.
    Check the above.
    Route is determined in delivery.
    ASHA

  • Abap Report including sales orders and delivery data.

    Hi Experts,
    I Want to develop a new abap report which would contain the data for sales orders and delivery.
    I want to fetch all the sales orders based on the ship date (LIKP-WADAT_IST) of the delievry.
    Could anyone please let me know how to fetch teh data or is their any function module which would help me to solve my problem.
    <Removed by moderator>
    Thanks,
    Komal.
    Moderator message : Spec dumping not allowed. Thread locked.
    Edited by: Vinod Kumar on Aug 10, 2011 1:25 PM

    post this in ABAP forum for quicker response.
    Regards
    Raja

  • Quantity and Price Totals on Sale Order and Delivery Order

    Dear ABAP Gurus,
    I want to add totals of line items (Quantity and Price) in sale order and delivery order screens. Can you please guide me how to do this. The price can be any from pricing procedure ie exclusive or inclusive price of sales tax.
    regards,
    RSA
    Moderator message : Requirements dumping not allowed, show the work you have already done, thread locked.
    Edited by: Vinod Kumar on Jan 28, 2012 9:23 PM

    Hi,
    Try this :
    IF @transaction_type in ('A','U') AND (@OBJECT_TYPE='22')
    BEGIN
    If exists (SELECT t3.docentry FROM OWOR T0  INNER JOIN WOR1 T1 ON T0.DocEntry = T1.DocEntry left join POR1 T2 on T2.[U_JONum] = T0.[OriginNum] and  T0.[ItemCode] =  t2.U_SubConItem] INNER JOIN OPOR T3 ON T2.DocEntry = T3.DocEntry WHERE T1.[PlannedQty] <> T2.[Quantity] and  T1.[ItemCode]  = 'subcon' and  T3.DocEntry = @list_of_cols_val_tab_del )
    Begin
    SET @error = 10
    SET @error_message = 'Not allowed to add more than planned'
    End
    End
    Thanks & Regards,
    Nagarajan

  • Quantity is different from sale order and delivery

    Hi,
    Gurus,
    Quantity is different from sale order and delivery.
    I identified the Material in the sales order, the item category for this material as BOM.
    I have also checked the bill of material display header overview. The Base Quantity maintained as 1000 EA3. The SUBITEM maintained in G in the unit field in bill of material display.
    Accordingly i have checked the same for material master's additionl data in Units of Measure tab, it is mentioned the basic unit as 1000 EA3 and alternative unit as 600 G.
    My client processed the order for 100 QTY. The QTY for the two sub item is 99.601 each in the sale order.
    My client Question is why in delivery the Material Qty is coming as 99.730 and the SUB ITEM is coming as 99.330 EACH.
    Note:- The material X is maintained in EA3 in Bill of material header overview. I do no how the sale unit came as G for the Material in sale order.
    The other two sub item is perfectly coming as G. Because it is maintained in G in the Bill of Material Display.
    Guide me GURUS.
    Thanks and Regards,
    ANAND

    Hello Rumar
    I guess you entered the text manually in the sales order. The Ship-to may not be having any text, but the Sold-to may be and it may be coming from sold to.
    In transaction VOTXN, check the access sequence for the text type id and see which one takes precedence - one from customer master or from the order by checking the order of accesses.

  • Availability check on storages in sales order and delivery documents

    Hi all,
    I'm verifying if it's possible to find a standard or a custom solution for this type of problem:
    I have a scenario in which there are more storages relevant for MRP (ex. 01, 02, 03, 04), and, in if I check availability in sales order or delivery (using checking rules "A" or "B") with setting which considering storages location inspection in availability check control, system check if there's stock available on all these storages.
    I'm trying to verify if it's possible to consider only some on these storages (ex. 01 and 03 only) in sales order and delivery documents availablity check.
    I know that in sales order storage location field is normally filled only using exit, but i don't know if it's possible to do, using a user exit, check availability considering only some storages and not all. At delivery level i have tried to use stock strategy, but this functionality don't have consequences on availability check, also if it's relevant during good issue phase.
    Any suggestion will be appreciated.
    Regards
    Gianpaolo

    Hi Gianpaolo,
    We had some issues with availability check on a Customer Site.
    I don't remember right now if we had to exclude storage locations from MRP to take them out from ATP, but I guess Shiva is 100% correct.
    At the end, what was done was to always "force" a unique storage location in the sales order item, which will be the storage location used for shipping of the delivery of course.
    If you use WM in your plant, then you will have no problem in having a unique storage location, so no problem.
    Anyway you are correct in your analysis, if the Storage location is not informed in the sales order item, then all the plant stock is taken in account for ATP.
    Best Regards,
    Franck
    Freelance Logistics SAP Consultant

  • Creation of Z reports for client adding two more column that is Purcahse order and delivery dates with Internal order wise

    HI Experts,
    Can any one help me to add two more column for standard report that is purchase order and delivery dates for Internal order wise.
    But here problem is when i checked with ABAP team they said there is no standard functional module to add two column.
    Please note below :
    Selection criteria is: 1) controlling area
                                  2) Fiscal Year
                                  3) From date and To date
                                  4) Plan Version
                                  5) Order Group.
    My client suggested : S_ALR_87012993 this tcode to run, but we suggested with S_ALR_87013019 as in this tcode we can get all the details
    That is required output fields, as it is showing all details but on yearly basis, he wants this to be period wise and also Abap team is not able to find standard functional module in the second tcode as well.
    Out Put fields to Pop up
    1) Orders.
    2) Budget
    3) Actual
    4) commitment
    5) Alloted
    6) Available
    These are two additional column
    7)Purchase order
    8) Delivery date.
    Require your help to know which all tables are included to extract above out put fields please help me.
    Thanks in Advance.
    Regards,
    Sudesh

    Hi Preeti,
    Thanks for reply, can you please let me know is there any other way to show the output fields.
    As my client is very specific to run the report on period wise, i also tried to execute the standard tcode S_ALR_87013019 and were we are getting all the required outputs to pop up but this is on year wise, but we can also check by period basis by clicking on order number and actual period basis where we can see period basis.
    Also one more question,what is the commitment table which is popping up in this, please advise.
    Thanks in advance.
    Regards,
    Sudesh

  • How to block sales order and Delivery order based on payment terms ?

    Hi  experts ,
    I have an sceneria to block the sales order and delivery based on payment terms ?
        For eg )  Customer payment terms  is Z001 which is 5 % discount within 30 days , No discount within 60 days.
                        My requirement here is a)   if open item exceeds 30 days , delivery to be blocked
                                                               b)  if open item exceeds 60 days , Sales order to be blocked..
    Pls give me a solution....

    HI Kakas,
    If possible in configuration , pls let me know .
    payment terms is     5 % within 30 days if customer pays
                                     No discount  within 30 to 60 days if customer pays.   
    Here , i need to control , sales order to be allowed and delivery not to be allowed  for a customer if any open invoice within 30 to 60 days and sales order to be blocked if  open invoice exceeds 60 days..
    Is this possible in Credit management ?.. 
    pls let me know...
    with Regards
    S.Siva

  • 051 routine between sales order and delivery copy control

    Hi,
    The copy control routine 051 in copy control from sales order to delivery defines four combination criteria.
    1) delivery types same in config of sales doc type
    2) sales org same of the sales orders
    3) delivery indicator same
    4) billing type same as defined in sales doc type.
    my question is if i have the follwoing copy control defined between sales order and delivery :-
    sales       del           sales       deliv         bill      routine
    order        type         org        agreement       type     in copy ctrl
    type
    ZOR          ZLF          1000         SAME          ZF2         051
    ZTSD          ZLF          1000         SAME          ZF2         051
    my question is how will the routine combine  all the sales doc type into a single delivery.  my confusion is since the rotuine is attached to every combination of sales doc type and delivery type in copy control, how will the routine identify that it has to combine the sales doc type ZOR and ZSTD into a single delivery.
    one of the statements wriiten in routine 051 is that " check sales org is same for all document ". does this mean that the routine will identify sales orders with doc type ZOR only  if the routine is attached in config for copy contol between zor and zlf and  i remove the routine for copy control belwteen zstd and zlf.
    regards
    sachin

    Sales order is the order from your customer and delivery is when you are delivering the item.
    Shipping: In general  when the item is dispached from the warehouse, we can say the item is shipped,where as delivery is item/product reaching to the end customer.
    Hope it helps,
    Kiran

  • RFC For Order and Delivery creation in SD from CRM - text not getting copie

    Hi
    I am trying to find out how the order and delivery is created in R3 if I create a return order in CRM, as we have one issue in which the text is not being copied to delivery??
    Thanks in advance
    Sameer

    Please check if you have any custom code/user exit in ECC which uses transaction code (VA01 , VA02 or VA05 etc) prior to invoking credit checks. 
    Orders created via CRM will not have transaction code set (SY-TCODE).

  • Sales order and delivery requirement

    Hi,
    I have never worked real time on TOR and availibility check. I need help on clarification on the concept.
    1) The sales order transfers the requirement to MRP. So in the sap system there is a standard  requirement type/class 41 for the same. I need to know why there is a requirement type/class for sales order related delivery (011- delivery req type/class) ?
    In sales order related delivery, only availibility check is controlled(thru delivery item category) since the requirements are already transferred from sales order. so why the 011 delivery requirement ?
    2)The requirement type is determined through sales order item categoryMRP type.for the same combination of item categorymrp type, do one has to assign both the sales order and delivery requirment. I.e. suppose sales item category is ZTOR and mrp type is PD. so do one has to necessarity configure the follwoing
    ZTOR+PD=041(SALES ORDER REQ TYP) and 041 assigned to 041 req class
    ZTOR+PD=011 (DELIVERY REQ TYPE) and 011 assigned to 011 req class
    regds

    hi,
    please go in to class details you will find various indicators, related to costing, accounting etc.
    kapil

  • Sales Order and Delivery

    Hii
    Is it possible to delete the sales order and delivery documents after adding it.
    for eg.
    Customer C001 created sales order and then made delivery.
    Is it possible to delete that sales order and delivery document and trasactions done related to it.what will be its impact.
    Can we do this.
    reply
    Thanks
    Neetu

    Neetu,
    Change posting period if delivery is not in current month.
    In 2 ways you can return a delivery
    1. Copy To from delivery.
    2. Copy From from return.
    You can return using any of 2 ways as below
    1.Open reqd. delivery click Copy To and select return,
    Change posting date,due date,document date if required,
    once again apply tax code it is removed on changing posting date,Check Doucment total match with delviery
    enter remarks for returning.Click Add to save it.
    2. Open return select required customer code,enter posting
    date,due date & document date as in delivery,Click Copy From
    Select required delivery,Use document wizard,Copy all data,
    Click add to save it.
    3. If items are excisable then copy return to incoming
    excise invoice,Enter excise reference number in it,
    Click add to save it.
    Now return process is completed,status of sales order & delivery & and also return document.
    Jeyakanthan

  • I am not able to get in sales order and delivery  24 hours

    Hi Frinds,
    i am not able to get in sales order and delivery  24 hours even i have defined pick pack time wrkdays 24hrs in
    CONFIG PATH:-Implementation Guide for R/3 Customizing (IMG) -> Logistics ->Execution->basic shipping Functions-> scheduling-> Delivery Scheduling and transporting Scheduling -> Define Scheduling by Shipping Point Or Transaction code:-OVLZ.
    Expected  Results:-Create sales order and delivery and check that the delivery The order has 24 hours after the transfer order is confirmed to allow time to pack order
    *can you help any body  to get in sales order and delivery  24 hours .
    Regards
    Madhu

    Dear Madhu
    Apart from OVLZ, you can also check in VOV8 where for your sale document type, check whether any value is maintained in the field "Lead time in days" at the bottom screen.
    thanks
    G. Lakshmipathi

  • VF04 - Listing both Return Orders and Delivery

    Hi Experts!
    I have a situation where by, when creating Return orders and delivery is done. When we go into VF04, when we select "order related" and "delivery related", there's two documents that can be invoiced. Either invoicing through order related or delivery related. How can we avoid this. I thought by default it should be delivery related unless it is a service related order that doesn't require delivery.
    Anye ideas of where to check?

    Dear,
    check in customizing for the sales document type you use for Return sales order what you maintained in the tab view Billing.
    Checkboxes of VF04 are linked to the definition of your sales document type.
    If your Return sales order needs to be only billed as delivery related, in cuztomizing you should have only maintained in the billing tab view the field Dlv-rel.billing type.
    If in customizing you maintained both: Dlv-rel.billing type and Order-rel.bill.type then when you go to VF04 and you check the two checkboxes you will always find your document.
    I hope this explanation may help you.
    In case I misunderstood your issue, do not hesitate to post you answer back.
    Regards,

Maybe you are looking for

  • Can i or can i not print a 6.75 x 4.75 envelope on my officejet pro 8600

    quick and simple can i or not print a 6.75 by 4.75(or any custom size not listed) envelope on my officejet pro 8600

  • 720p exporting to dv avi

    hi , i am wondering what would be the best way to export content shot in hd 720p to dv avi? first, i rendered to a  quicktime .mov  and imported it in a new  dv pal project then exported to dv tape. the result seemed fine. but some text graphics came

  • IPod touch and 80 gb classic in one iTunes? Possible?

    Bought my iTouch today, and i have a fully loaded 80 gig classic, i want to use the touch for work and stuff and manually select music to go on it, and the girl at the apple store said i could sync both to one iTunes, which i didnt think you could do

  • NUMBERS Suddenly Won't Open!!

    Today, Numbers stopped working.  I've updated to the latest version, restarted my computer, and corrected permissions.  But the program will only open as far as showing NUMBERS in my menu, and under FORCE QUIT, it states NUMBERS is "not responding."

  • Where to find .AdobePatchFiles

    I'm looking for the hidden .AdobePatchFiles, want to do a clean out.  I've set my mac to show hidden files, but I still can't find it anywhere.  It's not in /Applications/.AdobePatchFiles/ or HD/Users/Home/Applications/.  The only thing in my /Applic