About Primary Db's sync() and Secondary Db's sync().

Hi,
When I use Deferred write mode, and suppose I have 1 primaray Db and 3 secondary db.
If I call the primary Db's sync(), do I need to explicitly also call the 3 secondary db's sync()? or Berkeley Db will automatically sync() to the secondary databases when I call to the primary db?
Michael.

Hi,
You have to call sync for each Database explicitly, including SecondaryDatabases.
--mark                                                                                                                                                                                                   

Similar Messages

  • How to set security group as primary site collection admin and secondary site collection admin using powershell in sharepoint online site - office 365?

    How to set security group as primary site collection admin and secondary site collection admin using powershell in sharepoint online site - office 365?

    Hi,
    According to your description, my understanding is that you want to set security group as admin of primary and secondary site collection using PowerShell command in office 365.
    I suggest you can use the command below to set the group to site owner, then it will have the site collection admin permission.
    Set-SPOSite -Identity https://contoso.sharepoint.com/sites/site1 -Owner [email protected] -NoWait
    Here are some detailed articles for your reference:
    https://technet.microsoft.com/en-us/library/fp161394(v=office.15)
    http://blogs.realdolmen.com/experts/2013/08/16/managing-sharepoint-online-with-powershell/
    Thanks
    Best Regards
    Jerry Guo
    TechNet Community Support

  • Exchange rate variances between Primary and Secondary Ledger

    We have a little problem on our hands.....we are implementing dual ledgers with dynamic posting, primary in Canadian Dollar and secondary in USD.
    Exchange rate variances would occur if for example, we consider material transactions at different points in time. We would have no problems in the primary. However, CAD to USD exchange rates are updated monthly and very likely, rates would change month to month. Therefore, exchange rate variances would happen frequently in the secondary ledger.
    We have been asked by senior management how these variances would be handled by EBS. Just wondering if you have ideas though we are looking into the accounting events in SLA.
    Thanks,
    Sanjib

    If the requirement was to maintain balance in USD and Canadian dollar, You can use the Reporting currency option instead of Secondary ledger.
    Regards,
    Chirag

  • Setting up a primary and secondary Database in Oracle 10G

    Hi Experts
    can you please tel me the steps involved in creation of primary and secondary database? This is the first time i am going to configure this setup. Please provide your helping hands.
    Thanks alot in advance,
    Ram

    Absolutely glad to help.
    Step 1: Clarify what it is you are trying to build. Are you talking about a Standby Database? Perhaps Physical or Logical Data Guard? If so what protection mode? Stand-alone or RAC? Or are you just trying to dup an existing database on another server in which case you can just use RMAN.
    Step 2: Go to http://tahiti.oracle.com and read the relevant docs
    Step 3: Go to http://metalink.oracle.com and look at the Knowledge Base docs
    If you have any question thereafter contact us and be sure to include your version number, not a marketing label. 10g is a marketing label that refers to everything from the 10.1 Beta through 10.2.0.4.

  • Data deletion on primary index and secondary index

    Hello, I have a question regarding data deletion in BDB-JE.
    Suppose I have an Entity class which has a primary index and a secondary index, the secondary key does not have outer related entity. So when I want to delete this entity, is it correct we only need to remove the entity from primary index? or I also need to do it for secondary index or just remove it from secondary index and internally BDB_JE will remove it from primary index?
    Thanks
    Anfernee

    You can delete an Entity using the delete method for primary index or the secondary index. When an entity is deleted, secondary index records are automatically deleted. The primary and secondary indices are always kept in sync.
    --mark                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Primary address and Secondary Address of GPIB while configure the software for NI7210 chip

    I am using your latest linux software i.e. nigpib_linux_0.8.5 to install my GPIB Card. I have sucessfully installed it. But at the time of configuration i am getting the problem about the Primary and Secondary address of GPIB bus. Can u please tell which address should i use for these?

    Hi Ankur,
    You can use any driver as long as is unique on the bus. Just select a primary address, there is n o need for a secondary address (disable it).
    But more importantly, the linux driver does not work with the NI7210 chips. This driver is intended for interfaces using the TNT4882C GPIB controller.
    Make sure you have a board with this ASIC.
    DiegoF
    National Instruments.

  • How to bind the Zero line between a primary and secondary Y axis?

    All -
    We are using combination charts with:
    - primary and secondary Y axis (Sales versus Volume).
    - Scale: Auto (Y) Axis
    - Linear
    - Fixed Label Size
    In instances where one axis has a negative value and the value ranges are diverse the Zero line will be different for both. This causes some confusion when trying to read. Other that putting in manual (Y) axis with min and max, is there a way to force the chart to keep the same Zero line?
    Thanks!

    KOENIG Yvan wrote:
    It's quite a basic requirement for a spreadsheet program
    It's your point of view. It seems that it's not the designers's one
    Obviously, true
    The number of different features described once as "a basic requirement" is really amazing but a feature asked once is perhaps not one which must be added to a program like Numbers.
    Other tools are available for professional numbers crunchers .
    I know there are other threads asking about secondary axes, but your point is taken. I'm definitely not a number cruncher, but I am/was a pretty advanced Excel user.
    _Go to "Provide Numbers Feedback" in the "Numbers" menu_, describe what you wish.
    Then, cross your fingers, and wait _at least_ for iWork'09
    Thanks for that, I didn't quite know where to go for the feedback - provided and fingers crossed.
    Cheers!

  • Windows 8.1 screen bounces between primary and secondary monitors

    I have a Lenovo T530 laptop with a docking station and a IBM monitor L200P attached to it.
    Up until yesterday, this configuration was running Windows 8 Pro with no issues.
    However today, after I installed the Windows 8.1 upgrade, I started having problems with the screen bouncing between the primary and secondary monitors without my intervention. The problem happens very regularly, regardless of whether I have selected the laptop as primary monitor or the IBM monitor attached to the docking station.
    I verified that the problem does not happen with Windows 7 and Windows 8 installation and only starts appearing after the Windows 8.1 upgrade is applied.
    Does anybody have similar problems
    Thank you in advance.

    O''philipp [[#answer-697652|said]]''
    <blockquote>
    another thing you could try is this: enter '''about:config''' into the firefox address bar (confirm the info message in case it shows up) & search for the preference named '''layout.css.devPixelsPerPx'''.
    double-click it and change its value to '''1.2''' (or any other zoom factor that fits your purpose: 1.0 relates to 100%, 1.2 equals 120% and so on; -1.0 is the default value and will adhere to the system settings).
    </blockquote>
    Okay, I tried it, set it to 1.2 and even more stuff got blurry and fuzzy. Besides everything in the FF menu bar everything in the header on youtube and a few other pages did it too. It did make the pages fill the actual page better, but the blur is worse than this prob so I set it back to -1.0.
    Any other ideas?

  • Difference between primary eindex and secondary index?

    hi experts
    pls answer me
    difference between primary eindex and secondary index?
    rewads apply.
    thanks.
    naresh.

    hi,
    check this link.
    http://help.sap.com/saphelp_47x200/helpdata/en/cf/21eb2d446011d189700000e8322d00/frameset.htm
    A difference is made between Primary & Secondary indexes to a table. the primary index consists of the key fields of the table and a pointer to the non-keys-fields of the table. The Primary index is generated automatically when a table is created and is created in the datebase as the same times as the table. It is also possible to define further indexes to a table in the ABAP/4 dictionary, which are then referred to as Secondary indexes.
    Always it is not mandatory that an index should have all the key fields of a table. To see the index of a table
    goto SE11->specify table name->click on the indexes... button on the application toolbar.
    Based on your requirement you can you any of those index fields in the where clause of your query. Always its a better practice to use the index fields in the order specified. While selecting the records from a table it is always better to select the fields in the same order as specified in the table.

  • Need help with sorting records in primary and secondary databases

    Hi,
    I would like to store data into primary and secondary db in different order. For the main primary, I want it to be ordered by login_ts instead of uuid which is the key.
    For the user secondary database, I want it to be ordered by sip_user. For the timestampe secondary db, I want it to be ordered by login_ts.
    This is what I have right now,
    this is for main
    uuid=029ae227-a188-4ba8-aea4-7cbc26783d6 sip_user=200003 login_ts=1264327630 logout_ts=
    uuid=22966f76-8c8a-4ab4-b832-b36e8f8e14d sip_user=200003 login_ts=1264327688 logout_ts=
    uuid=e1846e4a-e1f5-406d-b903-55905a2533a sip_user=200003 login_ts=1264327618 logout_ts=
    uuid=e2f9a3cb-02d1-47ff-8af8-a3a371e20b5 sip_user=200003 login_ts=1264327613 logout_ts=
    this is for user search
    uuid=029ae227-a188-4ba8-aea4-7cbc26783d6 sip_user=200003 login_ts=1264327630 logout_ts=
    uuid=22966f76-8c8a-4ab4-b832-b36e8f8e14d sip_user=200003 login_ts=1264327688 logout_ts=
    uuid=e1846e4a-e1f5-406d-b903-55905a2533a sip_user=200003 login_ts=1264327618 logout_ts=
    uuid=e2f9a3cb-02d1-47ff-8af8-a3a371e20b5 sip_user=200003 login_ts=1264327613 logout_ts=
    this is for timestamp
    uuid=029ae227-a188-4ba8-aea4-7cbc26783d6 sip_user=200003 login_ts=1264327630 logout_ts=
    uuid=22966f76-8c8a-4ab4-b832-b36e8f8e14d sip_user=200003 login_ts=1264327688 logout_ts=
    uuid=e1846e4a-e1f5-406d-b903-55905a2533a sip_user=200003 login_ts=1264327618 logout_ts=
    uuid=e2f9a3cb-02d1-47ff-8af8-a3a371e20b5 sip_user=200003 login_ts=1264327613 logout_ts=
    but what I want is :
    this is for main
    uuid=e2f9a3cb-02d1-47ff-8af8-a3a371e20b5 sip_user=200003 login_ts=1264327613 logout_ts=
    uuid=e1846e4a-e1f5-406d-b903-55905a2533a sip_user=200004 login_ts=1264327618 logout_ts=
    uuid=029ae227-a188-4ba8-aea4-7cbc26783d6 sip_user=200003 login_ts=1264327630 logout_ts=
    uuid=22966f76-8c8a-4ab4-b832-b36e8f8e14d sip_user=200005 login_ts=1264327688 logout_ts=
    this is for user search
    uuid=e2f9a3cb-02d1-47ff-8af8-a3a371e20b5 sip_user=200003 login_ts=1264327613 logout_ts=
    uuid=029ae227-a188-4ba8-aea4-7cbc26783d6 sip_user=200003 login_ts=1264327630 logout_ts=
    uuid=e1846e4a-e1f5-406d-b903-55905a2533a sip_user=200004 login_ts=1264327618 logout_ts=
    uuid=22966f76-8c8a-4ab4-b832-b36e8f8e14d sip_user=200004 login_ts=1264327688 logout_ts=
    this is for timestamp
    uuid=e2f9a3cb-02d1-47ff-8af8-a3a371e20b5 sip_user=200003 login_ts=1264327613 logout_ts=
    uuid=e1846e4a-e1f5-406d-b903-55905a2533a sip_user=200003 login_ts=1264327618 logout_ts=
    uuid=029ae227-a188-4ba8-aea4-7cbc26783d6 sip_user=200004 login_ts=1264327630 logout_ts=
    uuid=22966f76-8c8a-4ab4-b832-b36e8f8e14d sip_user=200004 login_ts=1264327688 logout_ts=
    Right now, I have:
    int compare_login_ts(dbp, a, b)
         DB *dbp;
         const DBT a, b;
         int time_a = 0;
         int time_b = 0;
         time_a = atoi ( (char *)a->data);
         time_b = atoi ( (char *)b->data);
         return time_a - time_b ;
    for the timestamp secondary, I set that compare function:
              if ((ret = (*sdb)->set_bt_compare(*sdb , compare_login_ts )) != 0){
    Does anyone know how can I make it sorted according?

    Hi,
    The DB->set_bt_compare() is used to compare keys in Btree database. In the callback function, both the DBTs are key, but not data. Please refer to http://www.oracle.com/technology/documentation/berkeley-db/db/api_reference/C/dbset_bt_compare.html.
    If you want any field in the data to be sorted, you might create a secondary index on it and define the compare function as you wish.
    Regards,
    Emily Fu, Oracle Berkeley DB

  • I have a 64GB iPad2 and selected to "Automatically fill free space with songs".... will it have to download that 60GB of music to my ipad everytime I sync?  It took about 8 hours to sync the music to it

    I have a 64GB iPad2 and selected to "Automatically fill free space with songs".... will it have to download that 60GB of music to my ipad everytime I sync?  It took about 8 hours to sync the music to it.
    I did this last night at 10pm thinking it would take 30 minutes to sync these 10,000 songs or so to my ipad to take up the 64 GB.  I went to bed because it was taking so long and woke up at 6am and it was just about to finish.  It finished around 630am.  So it took a good 8 hours to sync.
    I unhooked it and used it for an hour or so and then hooked it backup so that I could update a few apps on it.  When i did that it acted like it was re-adding all of those songs again and it took about 8 hours again to sync all the music.  Was that just a fluke because I made changes to the ipad?  or will it always calculate and then re-sync alllllllllllllllllll of those 10,000 songs?
    Thanks so much for any help!!!
    -Michael

    Anyone?

  • Please help me to configure 2504 WLC as secondary in N+1 HA mode. My primary WLC is 5508 and both have 50 AP license.

    Please help me to configure 2504 WLC as secondary in N+1 HA mode. My primary WLC is 5508 and both have 50 AP license. I want to deploy the AP in the same location.

    Go HERE:  https://supportforums.cisco.com/discussion/12219106/high-availibility-2500

  • Magic Mouse Primary and Secondary Clicks Switched

    Recently I picked up a Magic Mouse and have since found some very strange things that I don't know how to fix:
    The primary and secondary clicks are switched. As in, under mouse settings when I select the secondary click to be on the right, only the primary click works on the right side and everything else is a secondary click. It is also very annoying because every time I have more than one finger touching the surface it counts as a secondary click. If anyone knows how to fix this I would really appreciate feedback.
    I looked around in settings and couldn't find anything regarding this matter. I fiddled with some stuff but never got it working properly.
    Feedback much appreciated!
    --Justin

    Looking at another thread in this forum, I see some people who had older apple mice installed before the magic mouse are having this problem with the magic mouse.
    I had an older wireless mouse that would take right-clicks before I set up the magic mouse. Unfortunately when I connect the older wireless mouse I can no longer access it's preferences. It only gives me the preferences a generic one button mouse. Somewhere there must be some set of files I can delete and it will forget this old mouse.
    I am pretty disheartened after a week of this. One of the benefits to a mac is that I shouldn't have to dig around removing drivers and such

  • I synced my iphone 3 to my pc and i had about 90 songs on it and when i looked at my phone to check if it worked, it deleted about 80 of the songs, what happened to them and how do i get them back

    I synced my iphone 3 to my pc and i had about 90 songs on it and when i looked at my phone to check if it worked, it deleted about 80 of the songs, what happened to them and how do i get them back

    You might have better luck in the iPhone community. I'll ask the hosts to relocate your post.
    iPhone community
    Have you tried syncing the iPhone to your computer and restoring from the backup to see if you can get your other songs back? If you purchased the new album with your Apple ID, you should be able to download it to your computer to sync.

  • Primary Barcode and Secondary Barcode

    Hi Experts ,
    Please let me know if its a good practice to have a Primary Barcode with with product number and a secondary barcode with fields of batch number,Expiration date and quantity in the product label.
    Also<b> i would like to know</b> if we need to have a <b>secondary barcode </b>if we have a Storage unit number Barcode on the pallet . Will the storage unit barcode give the information of materials or will the fields get populated in the RF device once we scan the SU barcode .
    If its possible to populate the fields (material number,batch,quantity and expiration date ) once we scan the SU Barcode then i ll just give a <b>proposal </b>to have only a primary barcode and a SU barcode.
    Your advise will be appreciated.
    Regards
    Albert.

    Then I'm going to stick with my original response.
    Looking at the documentation:
    http://www.oracle.com/pls/db102/print_hit_summary?search_string=%22secondary+index%22
    the term "secondary index" seems to be used primarily in conjunction with index-organised tables (where the primary key / primary index is part and parcel of the table) and with xpath.

Maybe you are looking for

  • Using CAN bus to transport and play the stream audio data

    hello, Just want to build a PC-Based control network using CAN bus (Ethernet not considered).The system is separated two parts , one is the front unit(FU), and the other is the centeral unit(CU). FU performs dialing-up number to the CU , and play the

  • Can Elgarto TV Diversity stream live TV to Apple TV?

    Hi, I know I can save TV to folders and then later stream to Apple TV but can I stream live TV from iMac to Apple TV?

  • Layers in an Acrobat file.

    How come when I export a layered InDesign file, and tell the settings to export Acrobat layers, when I open that files in Acrobat, there are no layers? what am I doing wrong?

  • How to use read() method in JEditorPane

    Hai, I not quite understand how to use the "read(InputStream in, Object desc)" method in JEditorPane, especially the "Object desc" argument. What should I put there? Can anyone give me an examples? Thank you and sorry for the trouble.

  • Java FX task daemon thread

    Hello, I'm working on a large scale GUI and running in to OOMs. Looking at the threads, there are hundreds of them sitting around named Java FX task daemon thread. Daemon Thread [Java FX task daemon thread] (Running)