About the non interactive form ?

i want to use ads forms to print some report  and it has no interactive action ,and when i print this form ,it report to me that i must upgrade my acrobat  reader to 7 ,
if i donot need  interactive  form ,must i upgrade my acrobat ?

You do not need to upgrade to the latest version (although it is recommended), but you will not be able to suppress the Reader pop-ups. This means you will always have to click those away. This is also documented in SAP Note <a href="http://service.sap.com/sap/support/notes/834573">834573</a>.
Cheers,
Markus

Similar Messages

  • Reagarding saving and sending the adobe interactive form as non interactive

    Hi ,
              I am trying to send the interactive adobe form as non-interactive form  through email.The interactive form size is very large because of the interactivity.
    Can anybody suggest how to do this.
    Regards,
    Debasis

    Dear Antony,
    Thanks for the reply.
           I got you but can you pls guide me how to go about it.
    I need to send the email while submiting the form.So when and how i will be mapping each data node /attibutes of the main form with the intermediate form.My interactive form is of 30 pages and it may grow upto 40 pages.My response is with the to the main form where i am showing the success message.
    Regards,
    Debasis Nayak

  • Sending the adobe interactive form as non-interactive form through email

    Hi ,
              I am trying to send the interactive adobe form as non-interactive form  through email.The interactive form size is very large because of the interactivity.
    Can anybody suggest how to do this.
    Regards,
    Debasis

    Dear Antony,
    Thanks for the reply.
           I got you but can you pls guide me how to go about it.
    I need to send the email while submiting the form.So when and how i will be mapping each data node /attibutes of the main form with the intermediate form.My interactive form is of 30 pages and it may grow upto 40 pages.My response is with the to the main form where i am showing the success message.
    Regards,
    Debasis Nayak

  • Problem when generating an non-interactive form in Web Dynpro java.

    Hi,
    I'm trying to create a PDFDocument using a creation context in java. Everything works fine when the Interactive property of the creation context is set to true. When I change it to false however, the Web dynpro application hangs and eventually throws the following exception:
    java.net.SocketTimeoutException: Read timed out
       at java.net.SocketInputStream.socketRead0(Native Method)
       at java.net.SocketInputStream.read(SocketInputStream.java:129)
       at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
       at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
       at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.readLine(HTTPSocket.java:806)
    I'm wondering why this exception occurs when i'm generating a non interactive form and never appears when i'm generating a form with the Interactive property set to true.
    Any ideas?
    Edited by: Arjan Nieuwenhuizen on Feb 25, 2008 3:24 PM

    Yeah I know changing the form properties will solve my problem, but since i'm developing a training for Interactive Forms in Web Dynpro Java, I wanted to figure out why the (static / non-interactive) combination didn't work, turned out to be a template problem, which i still didn't figure out, except the fact that having flowed content on your template is not the problem.
    My ideas about your question:
    When we have the layout of an Interactive Form, its clear if it's meant to be static or dynamic, we don't know however, if it's interactive or non-interactive.
    I don't think we can judge a layout to have an Interactive or non-interactive purpose, can depend on the situation in which the same form is shown/used:
    - One moment it can be interactive, e.g. user is filling in the form, can enter data etc.
    - Next moment it can be non-interactive, e.g. form is shown to another user.
    So it's more the scenario/situation that determines if the form is interactive or non-interactive.

  • Error during activation of adobe non-interactive form

    Hello everyone,
    I am trying to activate a non-interactive adobe form and am getting the below error:-
    "Field p_lifnr has a conversion routine(see SAP note 796755)".
    I have made sure that this field (which is corresponding to LFA1-lifnr) has context binding, I even tried using below code in its interface:-
    GET PARAMETER ID 'LIF' FIELD p_lifnr.
    and also tried the below:-
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
            EXPORTING
              input  = p_lifnr
            IMPORTING
              output = p_lifnr.
    just in case..
    but all above in vain,can someone let me know what might be the problem....or where would I find this 'SAP note 796755' ?
    Thanks,
    Rachna.

    Hi,
    I am facing the same problem of "Error during activation" while activating the SAP interactive form.
    I am using ECC 6.0, ADL 7.1 and Adobe reader 8.0
    Could you please suggest a way out.
    Thank You
    Aser

  • To print image in Non interactive form

    I have a requirement where image file is attached to QM02 transaction, now i want to print the attached image on QM02 print output. I am planning to use Non interactive form method to print the form output.
    Can anyone pls guide me how to insert/print image file which is attached at the transaction level.

    Otto:
    I followed the steps you have described in one of your earlier reply but I am unable to see the image on the non-interactive ADOBE form.
    Here is what I did.
    1) In the "Code Initialization" section of the form, I coded to get the SE78 stored image in to XSTRING field (by calling method cl_ssf_xsf_utilities=>get_bds_graphic_as_bmp)
    2) I created the image field and bound it to the XSTRING field derived in step 1. And I check marked "embed image" in layout of the image field.
    I also followed some other threads on this forum and tried to create a graphic node with a global field of mime type "BMP" and bound my XSTRING data onto it but to no avail.
    Any ideas?
    Thanks.
    Jitendra Mehta

  • Want to generate non-interactive form

    Hi Experts,
                    I want to generate some reports from webdynpro java as pdf.i want to do
    this as non-interactive form.Please tell me how can i generate such a non interactive form , if possible with example or  as step by step procedure.
    Regards,
    Ramanan.P

    Hello,
    if you set the flag 'Readonly' for your Interactive form element it will be a non-interactive form.
    Best regards,
    Dezso

  • Bundling different (non-interactive) forms

    Hi,
    I want to bundle different non-interactive form. When I run the report FP_CHECK_BATCH_PDF_RETURN with the settings:
    Bundle Mode = X
    All Forms in One PDS = checked
    i got the error message "Call contained error(s): ASSEMBLE (FP_JOB_OPEN)"
    When I select Bundle Mode = M everything works fine. I tested the report on many different systems with different ADS versions, but the error was always the same. Can anyone tell my what the problem is?
    Thx in advance!
    Markus

    Hi Markus,
    the SAP Help explain exact your problem. I don't get into it. I tried it with release 7.31 and also with 7.02 a few weeks ago and everything worked fine. Just work through the help.
    Here is a Wikipage which provides an example-coding:
    How to assemble PDF form pages into one file - ABAP Development - SCN Wiki
    I also got this link in my pocket,but you sound very familiar to the language)
    Formulare bei der PDF-R�ckgabe b�ndeln (SAP-Bibliothek)
    You have to set fp_outputparams-getpdf = 'M', that's a must do, to use the function.
    Regards
    Florian

  • How to binnding the data in the adobe interactive forms for making a table?

    Hi, experts,
    Function:
    Through the sharing context node between adobe interactive form and a WDA for ABAP, display the data of the sflight_node in the ADOBE.
    version:
    Acrobat Reader 8.1.0
    currently both of the SAP-ABA and SAP-BASIS SP level: 9
    ADS : Successful.
    The following is my action:
    1.     Create a interface (Z_SFLIGHT_INTF) with a attribute node (SFLIGHT_NODE) that type is "sflight"  using the transaction code "sfp"
    2.     Create a form (Z_SFLIGHT_FORM) using the transaction code "sfp" with the interface Z_SFLIGHT_INTF.
    3.     Trag the sflight_node in the Z_SFLIGHT_INTF to the form( Z_SFLIGHT_FORM).
    4.     Open the layout tab in the form(Z_SFLIGHT_FORM), and create a table(table1). Click the table created just now, select the binding tab in the object tab, and in the Default Binding, select the SFLIGHT_NODE under the Z_SFLIGHT_FORM.
    Problem 1:
    Do you tell me whether is right for binding the context SFLIGHT_NODE using this way? If bind 3 context attributes in the sflight, how can I do it?
    5.     Create a WDA for abap (ZZ_02_SFLIGHT), and create a view(MAINVIEW) using transaction code "se80" in the sap-gui with adobe interactive form. Set the templatesource(Z_SFLIGHT_FORM) in the  adobe interactive form properties and saved, and then, datasource is "MAINVIEW_Z_SFLIGHT_FORM" automatically.
    6.     But I only found the attribute SFLIGHT_NODE under the context node(Z_SFLIGHT_NODE), and  I don't found the NODE ( SFLIGHT_NODE ) context in the context tab in the WDA for abap so that I don't set data to the context NODE (SFLIGHT_NODE).
    Problem 2:
    Do you tell me what can I do it so that I get the node SFLIGHT_NODE rather than attribute in the WDA for setting the data to the CONTEXT NODE (SFLIGHT_NODE)?
    Thanks a lot.
    Best regards,
    Tao

    Hi, experts,
    You can reply back to me via e-mail if you think we should discuss this internally at [email protected] or [email protected]
    Thanks a lot.
    Best regards,
    tao

  • Drop down in dynamic table in the Adobe Interactive Form (Web dynpro ABAP)

    Hi All,
    I have scenario use drop down in dynamic table in the adobe interactive form (Using the button the dynamic table row will be increasing and decreasing).
    Assume I Add five rows dynamically in the dynamic table. The Last column contains Drop down.
    I have button in the adobe form.
    Button Name = u201CSAVEu201D
    Button type    = SAP Submit button (Native type u2013 I am Using ZCI).
    While clicking save button, I need to store the dynamic table datau2019s to back end system. I can able to store the data to back end system. After form data getting saved those particular values need to display in the adobe form. 
    Here I am facing a problem.
    I cannot able to view as a default value in the drop down, which I have selected some values after save operation I am not getting any values in the drop down as a default.
    Example:
    The dynamic table contains 5 rows (Each and every row Drop down contains one to ten values).
    1)     I have selected second value in the Drop down (ROW1)
    2)     I have selected fourth value in the Drop down (ROW2)
    3)     I have selected fifth value in the Drop down (ROW3)
    4)     I have selected seventh value in the Drop down (ROW4)
    5)     I have selected third value in the Drop down (ROW5)
    I press the save button that particular Drop down value gets saved in back end system and that particular values want display in the Drop down as a default value.
    How to resolve this problem.
    Regards,
    Boopathi M

    Hi,
    Solve the problem .
    I have created the New node for dropdown. also i have one node already for table.
    The new node i bind to dropdown, the table same for table.
    Its working fine
    Boopathi M

  • How to hide a fieldsuFF08elementsuFF09 in the Adobe Interactive form ?....urgent...

    Hi Experts,
    I'm working on Adobe Interactive form developed in WDP ABAP.( I have successfully config the ADS in my server.)
    Action:
    1. Create two view -
    first_view and second_view in the WDP ABAP..
    2. In the first_view, there are a input field( named "elements_number") and a button(named "create_button") .
    3. In the second_view, there is Adobe Interactive form ( named "adobe_form" ). There are 3 text_fields elements in the Adobe Interactive form.
    4. Run the WDP ABAP: first_view is opened. Type a number ex."2" in the "elements_number", click the "create_button".
    5. The second_view is opened.
    6. The "adobe_form" is occured.
    7. There are 2 text_fields displayed in the "adobe_form" and 1 text_field hiden in the "adobe_form".
    Steps (1) ~ (6), I have completed, but I don't know how to implement the step (7).
    Please give me some hint on this. I try to use the CL_WD_ADOBE_SERVICE, but I didn't found any examples. Do you give me some ways to implement the function? Thanks a lot.
    Thank you very much.
    Thanks,
    Tao

    Hello Wang,
    You need to transfer some additional information in an unused data field. Then, by using scripting within the form template, you can hide the input fields in question.
    Best regards,
    Thomas

  • Saving the interactive adobe for as readonly or non-interactive form

    Hi,
         I want to save the interactive form in the final submission as non ineractive or readonly.Though i could able to save the form as pdf but the form is editable.Can any one suggest solutions for this.
    Thanks in advance.
    Dev

    hi,
    that should be easy.
    make a Context attribute <xxx> of type "boolean"
    GOTO
    interactive form->properties ->enabled
    there instead of choosing "true" or "false", you can bind it to a context attribute.(click on ...)
    By default make the context "true" so that it is enabled.
    at some particular event when you want it to be disabled. set the  bound context to "false".
    this should help.
    regards,
    -ag.

  • About dynamic offline interactive form

    I have a request for working with pdfs in netweaver java, but the requisites are quite tight and I don't know if it will be possible to achieve with interactive forms.
    I need to:
    1- Generate a pdf file (many in fact) using preloaded data from backend for offline use.
    2- The pdf must be interactive so the user can introduce new data or modify the preloaded data.
    3- The user should be able to change dynamically the format of the pdf: add rows to tables, make visible/invisible parts of the document, fire different events...
    4- The user should be able to save his work in the file including the format (if he has added rows to a table or made invisible an object it should be saved).
    5- The user should be able to send the data to the server through a send button.
    In short, strange as it may sound, I need to simulate a web dynpro application using an offline pdf.
    I've been searching and I think 1 and 2 are not a problem. I would just need to use a template created in LiveCycle Designer and link the data source to Web Dynpro context. Please correct me if I'm wrong.
    I think 3 can be done using scripting and events set in LiveCycle Designer, though I have 0 experience with it.
    I don't know if I can achieve 4. From what I've read dynamic content can't be saved. That is, if the user changes dynamically the pdf format and saves it will be lost when opened again. Is it true?
    I don't know about 5 either. With online interactive form of course, but with offline? I've seen examples that use and upload control in a Web Dynpro application as an alternative but I'd like to avoid that if possible.
    I'd like to get some indications about if these points can be done or not, if possible with some references that illustrate it (links to blogs, sap help...)
    Some tips and references about how to implement the different parts of this scenario (specially from point 3 and beyond) would be really welcome.
    Thanks in advance.

    Almost all things you mentioned are quite possible with Adobe Forms.
    1- Generate a pdf file (many in fact) using preloaded data from backend for offline use.
    You can do this by creating a Interactive Form using ABAP or create an online form using WD ABAP and just save the required form when done to be used for offline use
    2- The pdf must be interactive so the user can introduce new data or modify the preloaded data.
    You need to have Adobe forms License in case you want your forms to be interactive. In ABAP I think in the driver program you need to set FILLABLE = X or something like that and for WD there is enabled property which needs to be set true.
    3- The user should be able to change dynamically the format of the pdf: add rows to tables, make visible/invisible parts of the document, fire different events...
    The user can add rows to table and depending upon conditions you can set the required fields as visible/invisble
    4- The user should be able to save his work in the file including the format (if he has added rows to a table or made invisible an object it should be saved).
    If your form is fillable and interactive the data can be saved by end user.
    5- The user should be able to send the data to the server through a send button.
    There are different types of Submit options available. You can use Submit by email so that the user can submit the form via email.
    Also I would strongly advise just try Search on forum and I am sure that you would get plenty of links/examples to work with.

  • How to get a non-interactive Form

    Hello,
    Is it possible to use livecycle Forms to generate a non-interactive PDF using a pdf file? If using a xdp file i get a non-interactive pdf file, however, when using a pdf file as the input the pdf is always interactive. the parameters I used:
    sPreferences = "PDF";
    options = "CacheEnabled=False&RenderAtClient=False",
    thank you

    From Visual Basic 6 I am attempting to merge several copies of a template form. Since these copies all have the same field names, InsertPages will not work properly. Alternatively I sought to re-name the field names in my code. Turns out this is a read-only property. My last thought is to somehow convert the "interactive" pdf into a "static" (or, "non-interactive" one that I will be able to merge. Anyone know how to do this? thanks

  • Rendering a non-interactive form

    How do we use scripting in Live Cycle Designer to render a non-interactive pdf. Data is populating the form using xml. Thanks and help will be appreciated

    Couple of issues that you should know before proceeding.
    1. To communicate with a web service from the form using Reader you will need to Reader Extend the form using Reader Extensions Server and not Acrobat. Acrobat does not turn that right on. Note that if you intend to use Acrobat this is not an issue.
    2. There is no means of getting the PDF form while it is running into the context of a SOAP message. There is no programmatic way to put the PDF into the payload from the form. I can get the data but not the form.
    3. Once the data is populated into the form we could change all of the fields to Read Only ...thereby achieving the flattening that you require.
    4. The web service will not be able to save or print locally through the client. The client will have to do that . The client being Reader or Acrobat.

Maybe you are looking for