Abs and zlib not found in db (Solved)

I just reinstalled arch and am going thru the configuration and installation procedures. I want to install kde and went to the kde section of the beginners guide. I am supposed to
pacman -S zlib shared-mime-info
I get zlib package not found searching for group.. error: zlib : not found in sync db
I also wanted to get things ready for package building so I went to the wiki and am supposed to do pacman -S abs base-devel fakeroot
I get abs package not found searching for group.. error: abs: not found in sync db
so I did pacman -Syy pacman to make sure it was up to date and then I retried zlib and abs with the same results. am I missing a step?
Shut down konsole and researched pacman .  Then I started up konsole and redid pacman -Syy and everything came up..
Last edited by smcsw2000 (2009-02-27 03:23:21)

You are right. It's working now. Thanks!

Similar Messages

  • Driver and software not found. Please help

    Hello,
    I recently updates my iTunes too the latest version now my disc burner isnt working. I get an error saying disc burner and software not found. I tried to run diagnostics and have scoured the internet and forms for answer.  I have read this and it says i am not an administrator but on my computer i checked and i am. Unless i am doing it wrong. Any help would be greatly appreciated.
    Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
    Dell Inc. Inspiron 5521
    iTunes 12.1.1.4
    QuickTime not available
    FairPlay 2.7.50
    Apple Application Support 3.1.2
    iPod Updater Library 12.0
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 8.1.1.3
    Apple Mobile Device Driver 1.65.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 3.06.0.2770
    Gracenote MusicID 3.06.0.2770
    Gracenote Submit 3.06.0.2770
    Gracenote DSP 3.06.0.2770
    iTunes Serial Number 000000EF2D410840
    Current user is not an administrator.
    The current local date and time is 2015-04-03 10:25:39.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    **** External Plug-ins Information ****
    No external plug-ins installed.
    Genius ID: 7c442418567b765b60e544f855b8db56
    iPodService 12.1.1.4 (x64) is currently running.
    iTunesHelper 12.1.1.4 is currently running.
    Apple Mobile Device Service service 3.3.0.0 is currently running.

    Hey dancin_chick,
    If you find you are unable to burn CDs from iTunes on your Windows computer, I would suggest that you troubleshoot using the steps in this article - 
    iTunes 12 for Windows: If you have trouble burning a disc
    Thanks for using Apple Support Communities.
    Happy computing,
    Brett L 

  • Conversion rate between AUD5 and USD not found

    Hi,
    In a classic scenario, I created a shopping card. And created P.O at the back end. And trying to do the Confirmation of goods. I am seeing this error.
    "Conversion rate between AUD5 and USD not found "
    I check the Organization unit Currency its USD only.
    User used under the Orginzation unit who inherited this attribute.
    Any Idea where things wrong.
    Thanks in advance.
    rao

    Hi All,
    I don't want to import or define the exchange rate. I am using US currency only. I use Xk02/xk03. I didn't found any option to check the vendor currency.
    Looks like somewhere I messed up the currency. Any idea
    Thanks!
    Rao

  • I have files that say they are missing or offline. I have checked all my folders off of lightroom and they can not be found. I have used the ? mark settings to find and still not found. I can see the images on lightroom so they have to be in my system som

    I have files that say they are missing or offline. I have checked all my folders off of lightroom and they can not be found. I have used the ? mark settings to find and still not found. I can see the images on lightroom so they have to be in my system some how. How can I retrieve these images? Is there a re boot for lightroom? Need help ASAP!

    You have probably moved the files outside of Lightroom. The images you see in LR are previews that were made before you moved the files.
    Do a search for the files/folders using your computers operating system. (Explorer/Finder)
    Once you have found them, you can point LR to the right location.

  • LR4 opens as lr2 and images not found

    LR4 opens as lr2 and images not found, can anyone help me please, I'm hopeless.
    LR4 just uploaded as upgrade.

    Thanks dj, what happens is when I click on the LR4 shortcut  LR4 window starts to open, flashes momentarily as LR4 then buggers off before fully opening my old LR2.
    I have removed the LR4 installed yesterday, and reinstalled, but same problem. Also the installation process now seems to never stop cycling. It goes through the full installion cycle, then starts/repeats again. I have followed the prompts and run through it 3 times before giving up.
    Any more clues on what I have done wrong, or now need t do please.

  • HT1296 I can't sync the songs from my computer to my ipod touch. I have gone through the iPod directions on this page and have not found them helpful. For example, I can't find the Autofill button. Can you help?

    I can't sync the songs from my computer to my ipod touch. I have gone through the directions on the iPond help page and have not found them helpful. For example, I can't find the autofill button. Can you help?

    I have already tried following those steps. I went back and tried to follow them again but they did not work. Some of my songs have synced, some have not. And I am still not seeing the Autofill icon on the bottom of the menu or anywhere else. I fear something has been corrupted here and I need to start afresh.

  • When i try to burn  from library disc burner and software not found message appears

    when i try to burn a disc from library the message disc burner and software not found appears.

    Hello,
    I am having the same problem - "Disc burner or software not found" and I can't create a new CD from iTunes "burn playlist to disc".  I see many others asking the same question and I don't see answers.  I have spent all day uninstalling and reloading iTunes, testing, etc.  Even iTunes support said they couldn't help me. 
    I have Windows 7, and I can't really use iTunes without having the CD burner working.  I have wasted hours and will gladly pay for help, but iTunes support said "no".

  • IMac:  I type in an IP Address to view my home camera system.  I get a screen : please click icon to load and install webkitplugin:  I hit enter and get: not found.  This IP address works on my iPhone to view my camera system. Help!

    iMac:  I type in an IP Address to view my home camera system.  I get a screen : please click icon to load and install webkitplugin:  I hit enter and get: not found.  This IP address works on my iPhone to view my camera system. Help!

    Search the support website or contact the helpdesk of the equipment supplier. That would be the first place I'd try.

  • [Solved] yaourt and liblbxutil: not found on AUR?

    When running yaourt I am receiving the following notice:  liblbxutil: not found on AUR
    Previous runs of yaourt did not produce this message.  Where did the package go and how to fix?
    Last edited by BKJ (2008-11-12 00:45:46)

    I found it in the ABS tree even though it doesn't seem to exist in any of the repos anymore. You may want to file a bug report. I don't know if it's being used by anything. It's listed as installed as a dependency but not required by anything.
    # $Id: PKGBUILD 356 2008-04-18 22:56:27Z aaron $
    #Maintainer: Jan de Groot <[email protected]>
    pkgname=liblbxutil
    pkgver=1.0.1
    pkgrel=1
    pkgdesc="Low Bandwidth X11 Utility Library"
    arch=(i686 x86_64)
    url="http://xorg.freedesktop.org/"
    depends=('zlib')
    makedepends=('pkgconfig')
    options=(NOLIBTOOL)
    source=(${url}/releases/individual/lib/${pkgname}-${pkgver}.tar.bz2)
    md5sums=(b73cbd5bc3cd268722a624a5f1318fde)
    build() {
    cd ${startdir}/src/${pkgname}-$pkgver
    ./configure --prefix=/usr \
    --build=${CHOST} --host=${CHOST}
    make || return 1
    make DESTDIR=${startdir}/pkg install || return 1
    Last edited by skottish (2008-11-09 18:36:54)

  • [SOLVED] sudo and "command not found" problems

    Ok, the problem I've got is this: sudo has suddenly started acting real strange. It can't find any programs. For example, if i type
    sudo echo
    It just goes
    sudo: echo: command not found
    And another problem I've got, is that as a regular user, it can't find programs in /sbin, or other "exotic" places. For example it can't find firefox, because it's not in /usr/bin or /bin, but in /opt/mozilla/bin.
    Please, help me!
    Last edited by mrpedroxx (2008-06-14 13:23:49)

    sudo -V outputs this
    Sudo version 1.6.9p15
    $PATH outputs
    bash: /usr/gnu/bin:/usr/local/bin:/bin:/usr/bin:.: No such file or directory
    pacman -Q firefox outputs
    firefox 2.0.0.7-1
    Yeah, maybe I should update it anyway
    And /var/log/errors.log does contain stuff about hard disks, but it's just me mounting my iPod and the Windows partition on my hd

  • [SOLVED] udevd and udevadm not found and failure to boot

    I did a system upgrade and installed nvidia and cuda
    and afterwards archlinux failed to boot properly. saying
    /init line 21 udevd not found
    /init line 21 udevadm not found
    it then goes on to say how it could findthe hard disk that grub2 told it about.
    OK, I was then presented with a fairly spartan cmdline, and looked up that line in init and it is "parse_cmdline".
    So what I'd like is to get an orientation on the problem. Naturally I've done a bit of searching on it, though the search was brief.
    In any case, my ideas are:
    - this is not a grub2 problem. Without udev a good grub won't work.
    - the cmdline I get is the ramdisk, and mounting the harddisk will be futile without udev.
    - the ramdisk is messed up and not the harddisk (this is a hope, rather than a conclusion)
    Accordingto this short thread https://mailman.archlinux.org/pipermail … 32762.html
    where I noticed that yes indeed, there is a seemingly broken symlink in the ramdisk's /lib64.
    So I expect I should recreate the ramdisk, but though there is a bunch of information on this, I'm not clear how I can do it from the ramdisk image. I suspect I can't. So, seeing as I can't get in to my archlinux HD installation, I need to try the archlinux install CD. However Im not sure I can generate it there. Maybe I need to mount the installation from the CD and chroot?
    Any helpful advice/guidance welcome. Cheers!
    Last edited by arthro (2013-04-16 15:27:10)

    I followed my logic and loaded up with the CD and mounted on /mnt and chrooted.
    then
    mkinitcpio -p linux
    as per docs and numerous posts.
    and rebooted.
    This finally allowed me into my arch installation.

  • HG and 404: Not Found

    I'm trying to write PKGBUILD using mercurial and am getting a: 404: Not Found error when trying to download the repository.  I must be missing something obvious here but... phhht.  When I do:
    hg clone http://hg.icculus.org/icculus/mojosetup
    from the command line, no problems.  When I put this into the PKGBUILD, and doing 'makepkg -sf', I'm getting:
    ==> Determining latest hg revision...
    abort: HTTP Error 404: Not Found
    Been a little bit but I seem to remember doing this on git pkgbuilds.  Here's the PKGBUILD:
    # Maintainer: Gen2ly <[email protected]>
    pkgname=mojosetup-hg
    _pkgname=mojosetup
    pkgver=1
    pkgrel=1
    pkgdesc="Nextgen installer for Unix Independent Software Vendors (ISVs)"
    arch=('i686' 'x86_64')
    url="http://icculus.org/mojosetup/"
    license=('custom')
    depends=('bzip2' 'libfetch' 'lua' 'zlib')
    makedepends=('mercurial')
    optdepends=('')
    options=()
    install=""
    source=('')
    md5sums=()
    _hgroot="http://hg.icculus.org/icculus/mojosetup"
    _hgrepo="mojosetup"
    build() {
    msg "Connecting to Mercurial server..."
    if [ -d $_hgrepo ]; then
    cd $_hgrepo
    hg pull -u || return 1
    msg2 "The local files have been updated"
    else
    hg clone $_hgroot $_hgrepo || return 1
    msg2 "Mercurial checkout done"
    fi
    # Build
    mv $_pkgname $_pkgname-$pkgver
    cd "$srcdir/$_pkgname-$pkgver"
    mkdir cmake-build
    cd cmake-build
    cmake .. -DCMAKE_INSTALL_PREFIX=/usr
    #-CMAKE_BUILD_TYPE=MinSizeRel
    make || return 1
    make DESTDIR="$pkgdir/" install
    I'm guessing mercurial does versioning differently????  Any ideas?

    I got the build process to start reliably by changing source=('') to source=(), correcting _hgroot and adding a couple of cd ${srcdir}'s:
    _hgroot="http://hg.icculus.org/icculus"
    _hgrepo="mojosetup"
    build() {
    cd ${srcdir}
    # Build
    cd ${srcdir}
    Unfortunately, it bombed before completing:
    Scanning dependencies of target mojosetup
    [ 40%] Building C object CMakeFiles/mojosetup.dir/buildver.o
    [ 41%] Building C object CMakeFiles/mojosetup.dir/mojosetup.o
    [ 42%] Building C object CMakeFiles/mojosetup.dir/gui.o
    [ 43%] Building C object CMakeFiles/mojosetup.dir/fileio.o
    [ 45%] Building C object CMakeFiles/mojosetup.dir/archive_zip.o
    cc1: warnings being treated as errors
    /home/david/Junk/mojosetup/src/mojosetup-733/archive_zip.c: In function 'zip_find_end_of_central_dir':
    /home/david/Junk/mojosetup/src/mojosetup-733/archive_zip.c:608: error: dereferencing type-punned pointer will break strict-aliasing rules
    make[2]: *** [CMakeFiles/mojosetup.dir/archive_zip.o] Error 1
    make[1]: *** [CMakeFiles/mojosetup.dir/all] Error 2
    make: *** [all] Error 2
    ==> ERROR: Build Failed.
        Aborting...
    Last edited by azleifel (2009-12-15 21:32:48)

  • Integrating Google Maps in Oracle Apex and 404 Not found error page

    Currently using APEX version 3.2.0.00.27 installed in OracleXE version 10.2.0.1.0. Have been attempting to recreate some examples of Google Maps within APEX. Found a nice set of examples here that build up to what I'm looking to ultimately do by incorporating google maps into APEX:
    http://blog.whitehorses.nl/2009/10/04/integrating-google-maps-in-oracle-apex/
    Unfortunatly, I'm getting the "404 Not Found, Not found, The requested URL /apex/wwv_flow.accept was not found on this server" page when I try to recreate the "Map with Search" example. I'd like to see if this really works using the html input and button tags in the body/region source versus creating APEX items to pass the address values to the javascript in the html header of the apex page. I'm thinking it's just an html thing within APEX that you have to do it a certain way, but I haven't managed to hit that magic combination. have gone to the google maps api v2 and looked at the html they use (it's what these examples with apex are based on) and tried that just to see. Same 404 result.
    I've seen suggestions at this forum and elsewhere that the 404 error is due to a bug. have been to metalink, and really haven't seen anything that spells out what the bug is and how to patch it or work around it. May be I just haven't found the right note/doc yet. have seen suggestions to change something associated with the Anonymous account that APEX uses. Have turned on authentication in the application to use an APEX user account with a logon page to the application. Still get the 404. Although, I have not adjusted anything elsewhere, like a DADS config file, because the apex/xe configuration is using the plsql gateway. Not sure of any procedure for changing settings on anonymous account when using plsql gateway.
    Open to suggestions. APEX 3.2 is customer version, so going to 4 may not be an option yet. XE, on the other hand, can certainly be swapped for an 11g version standard or enterprise edition if need be. I don't think this is a db version problem though. I think it's more on the APEX side of things.
    Anyway, any help or suggestions are appreciated.
    thanks
    rtp
    Edited by: RTP on Jun 24, 2011 10:30 AM

    Hi I have the same problem.... if you found the solution, please put it here to see it... I need a solution to this its urgent!!
    Thanks!!

  • Listner and "Message not Found" Error

    I tried to find other info on this, but i couldn't, so any
    information would be very helpful.
    whenever i run:
    lsnrctl start
    i get these errors:LSNRCTL for Linux: Version 8.0.5.0.0 -
    Production on 17-AUG-99 22:58:55
    (c) Copyright 1997 Oracle Corporation. All rights reserved.
    Message 1070 not found; No message file for product=NETWORK,
    facility=TNSTNSLSNR for Linux: Version 8.0.5.0.0 - Production
    NL-00280: Message 280 not found; No message file for
    product=NETWORK, facility=NL [listener.log]
    NL-00278: Message 278 not found; No message file for
    product=NETWORK, facility=NL
    SNL-00016: Message 16 not found; No message file for
    product=NETWORK,
    i used the default listener.ora and tnsnames.ora that were
    installed.
    thanks for any help,
    -- adam
    null

    Thank you so much!!!! that was the problem. i could have sworn i
    set up my "oracle" account properly, but i didn't. this will
    probably fix any other problems i was going to have also...
    thank you very very much,
    -- adam
    Michael Tokarev (guest) wrote:
    : Set and export ORACLE_HOME env. variable.
    : Adam (guest) wrote:
    : : I tried to find other info on this, but i couldn't, so any
    : : information would be very helpful.
    : : whenever i run:
    : : lsnrctl start
    : : i get these errors:LSNRCTL for Linux: Version 8.0.5.0.0 -
    : : Production on 17-AUG-99 22:58:55
    : : (c) Copyright 1997 Oracle Corporation. All rights reserved.
    : : Message 1070 not found; No message file for product=NETWORK,
    : : facility=TNSTNSLSNR for Linux: Version 8.0.5.0.0 - Production
    : : NL-00280: Message 280 not found; No message file for
    : : product=NETWORK, facility=NL [listener.log]
    : : NL-00278: Message 278 not found; No message file for
    : : product=NETWORK, facility=NL
    : : SNL-00016: Message 16 not found; No message file for
    : : product=NETWORK,
    : : i used the default listener.ora and tnsnames.ora that were
    : : installed.
    : : thanks for any help,
    : : -- adam
    null

  • Problems with cached previews and File Not Found errors in preview and build

    I am having serious issues with Encore CS5.
    When I try and build a preview or disk/image I am getting File Not Found errors. I have emptied the media cache in the preferences but my project still seems to be referencing previously cached files or rendered menus. Is there any way to manually delete previous previews or the cache. I know that there are no missing files in my project. Any help would be very much appreciated.
    I am running Mac OS 10.6.4 and Encore 5.0

    To fix your locales, see http://wiki.archlinux.org/index.php/Configuring_locales -- in specific, you'll need to uncomment the en_US.utf8 locale at least, since that's the one that's specified in your rc.conf

Maybe you are looking for