AC 5.3 Release Note Inquiry - Is it included in an Support Pack for AC5.2??

Hi Everyone,
In release v.5.3 release notes, SAP noted that the logical validation of "not to allow approvers to approve their request" has been added.
Does anyone know if this functionality was included in a Support Pack for v.5.2 version? Or would we have to upgrade to v.5.3 to benefit from this functionality?
Thanks,
Jerri,

Jerri-
Since it was considered an enhancement, it was included in the next release, and not as a SP release for v5.2.
Ankur

Similar Messages

BSP application not being pulled after the application of support packs

Hi all,
Support packs SP 35-42 were applied last week end and after that one of the three BSP applications in production server is not being pulled through SAP gui. If I take the URL and paste it in IE the same application is being pulled. We are suspecting that to be a web dispature issue or firewall issue. The land scape is like this. P20 is our production server and C20 is our QA server.P20 has Sun109 as a web dispature and C20 has Sun108 as webdispature. There is a firewall in between P20 and Sun 109 but there is no firewall in between C20 and Sun 108. We redirected P20 to Sun 108 to test and all the three applications pulled up. so we concluded that it could be an issue with SUN 109 or a firewall issue. I am new to this webdispature stuff. I need help in identifying which files I have to look in to identify any kind of such errors. it is confusing why other two applications are being pulled and only one is not being pulled into SAP gui. We debugged the code and every thing is working fine. this is an urgent issue to be resolved.These application were developed long back and the developer did not leave any documentation how the hand shake is done between the web dispature and the SAP system.We are supporting the production system now. I appreciate any one responding as soon as posible.
Thank you very much,
Giri

You mustn't have looked very hard.
Try https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=954792 as a starter.

Where can I find detailed Release Notes?

We are performing transition from 5.5 to 7.0.
We do not need full description, it is too large.
Just differences from the previous version.

Since you mentioned that you're transitioning from 5.5 to 7.0, it sounds like that you're asking about CVI. If so, here are a few things that you can look at:
Measurement Studio 6.0 Release Notes - Look under New Features and Enhancements->LabWindows/CVI to see the new features that were added between 5.5 and 6.0.
LabWindows/CVI Release Notes - Look under New Features to see the new features that were added between 6.0 and 7.0.
LabWindows/CVI 7.0: Enhanced Hardware Integration and Efficient Development for Sophisti
cated Applic... - This is a whitepaper that details new features that were added between 6.0 and 7.0.
If you're looking for new features in Measurement Studio, see:
Measurement Studio 6.0 Release Notes - Look under New Features and Enhancements->Measurement Studio for Visual C++ and New Features and Enhancements->Measurement Studio for Visual Basic for new features that were added to the Visual C++ and Visual Basic libraries between Measurement Studio 1.0 and Measurement Studio 6.0.
Measurement Studio for Visual Studio .NET - This is an overview of what's new in Measurement Studio for Visual Studio .NET. In particular, see New Features in Measurement Studio 7.0
- Elton

Cat 4000 Sup 1 and 2 rommon upgrade release notes?

I'm trying to find the release notes for the Cat 4000 sup 2 rommon upgrades. I've looked all over CCO but haven't been able to find them. In the release notes for CatOS 8.x, 7.x etc it tells you HOW to upgrade the rommon, but it doesn't tell you WHAT it does.
I've done the 6500 sup and msfcs before and they had release notes.
These are the ones I'm looking for:
6.1.5
6.1.4
5.5.5

check the following link for upgrading the rommon for Catalyst 4000 switches :
http://www.cisco.com/en/US/products/hw/switches/ps663/prod_release_note09186a008029aa83.html#wp142218

Where are the Boot Camp Update 3.3 release notes?

I got a prompt on my Windows 7 install about an update. States to go to the boot camp support page for release notes. Went to the boot camp support page and no release notes. Saw link "Boot Camp Software Update 3.3 for Windows" (http://support.apple.com/kb/DL1443) and I can download from there but again, it doesn't show what exactly is in it other than "critical bug fixes and hardware support". Then it says for more information to go to the main boot camp support page.
So where the heck do I go to actually SEE what was fixed in the release?!

As far as I can find out, only Apple knows the details about 3.3 .

Hyperion and Siebel CRM release notes and Supported Operating System.

Hi DBA's
Kindly provide me the links for Release notes and What are the Operating system support for Hyperion and Siebel CRM?
Thanks in Advance.
Best Regards,
SG

Hi;
Thanks allot, the documents helped me and one last question regarding above versions of Hyperion and Siebel,
1) can i go with Windows 2008 Enterprise Edition 32bit Hyperion and Siebel?
2) is there any possibility that i want to keep database for both Hyperion and Siebel in Linux 4.0 ES 32bit and Application of Hyperion and Siebel in Windows 2008 EE 32bit?AFAIK Hyperion and Siebel new version is certified wiht Win2008 but i heard some of component not support on linux. Please check below
http://www.oracle.com/technetwork/middleware/bi-foundation/hyperion-supported-platforms-085957.html
http://download.oracle.com/docs/cd/E11886_01/V8/CORE/core_8_1.html
I suggest log a Sr and confirm it with oracle support if you have any doubt.
For your both question please move your post to related place which you could get more quick response, please visit :
Forum Home » Siebel
Forum Home » Business Intelligence Challenge to Go » Hyperion EPM
Regard
Helios

Support Pack Status not updated in System Component Information

Hi Experts,
We have installed ECC 6.0 with Ehp3 and AFS 603 on AIX 6.1 and db6 V 9.1. We recently added the Vistex Incentive and Payback Module and Vistex Global Functions Add Ons. After the base install the Support pack 1-4 were applied for both Vistex components. For IRMGLB the status screen (System/Status) shows the SP highest Level = 03, while in SPAM screen it shows that Support Pack for for the Component IRMGLB is imported successfully.Because of this we can not apply the remaining Support Packs. For the other component (IRMIPM) Support Pack level 04 is correctly displayed.
Any idea what are we missing? Any help is greatly appreciated.
Thanks
Suhail

For future referers, Vistex says its a known issue.
Hello,
It is a known issue but it would not impact any of the functionality.
It can only be fixed in the subsequent release with conjunction with
SAP.
Thanks,
Vistex Support

HR support packs not available in Service Market Place

Dear SAP,
We are planning to upload SAP_HR Support Pack till the level SAPKE50076
We are currently in level SAPKE50063. We need to go till the level 76
as we req to implement snote 1474958 and all its prerequisites the note
number 1474958 is mentioned as in support pack SAPKE50075.
But while we try to download it from Service Market place and search
for the support packs of HR for SAPKE500* we are able to get the last
search as SAPKE50071. We need to get 72,73,74,75,76 as well.
Please suggest what needs to be done as we need to critically implement
the HR Support packs for some HR Process.
- Jitesh
( SAP Basis )

Hi Jitesh,
When I checked in the market place I could see patches upto 81 for SAP HR 5.0 and they are very much available. Once you search the patches goto page 7
Let me know if you need any help.
Regards,
SBK

List of notes part of an EHP1 Support Pack Stack

Hi, is it possible to get a list of SAP notes included in a specific Support Pack Stack in Solution Manager?

Hi,
You can generate a side effect report of the support pack which will give you brief overview of all the changes included in the support pack.
Thanks
Sunny

When using stream clip to covert m2t files its says mpeg2 playback component is not installed is it included fcpx

when using stream clip to covert m2t files its says mpeg2 playback component is not installed is it included fcpx

You need to purchase for MPEG Streamclip's full functionality.
Russ

RELEASE NOTES R180 - scheduled for September 25th 2012

We are announcing a new Business Catalyst release, scheduled to go live on Tuesday, September 25th.
This release includes some great improvements to our module templates, new features for our email marketing system, admin interface improvements, a few infrastructure updates and lots of bug corrections.
Read through the following sections to get detailed information about this release:
Features and enhancements
Issues fixed by this release
You can jump to the corresponding section by clicking the above links.
Features and enhancements
Modules improvement
Starting with our September release, we have enabled users to use a html page or a static template as a module list template (layout) for all modules that are using templates today. The new addition allows partners to create different views for the same data for a personalize experience. To use this new functionality, just create a new module template and update your module properties by specifying the template to use.
Ex: {module_blogsitepost,2 template="/ModuleTemplates/Custom/MyTemplate.tpl"}
Note: although you can use any extension you feel comfortable with, we recommend using a .tpl extension for two reasons: help locate the template better and avoid having these templates being displayed in Page list.
Email marketing application improvements
This is release is packed with new features and enhancements to our email marketing system.
Dynamic modules in email campaign - you can include modules (a subset of 19 modules) in the Email Campaigns content; the system will render these modules right before the campaign is sent, making sure your customers always receive the latest content;
Fresh, new email templates - the release includes a set of new of new email templates that look much better; along with these new templates, the template selection page was re-done to show better thumbnails;
Improved recipients selection - we have improved the recipients wizard step, replacing the checkbox list with a smart search and select control; additionally, with this release you will be able to select multiple lists (including Customer Reports) to exclude from your campaign.
Improved campaign status screen - before sending the campaign, you will now be able to view the exact number of recipients before sending the campaign (Note: reports and list requiring a long time to compute will be approximated); additionally, while the campaign is sending, we are displaying a meaningful status, that indicates that the campaign is being sent.
Email clients reporting - the campaign report screen has also been improved to include a report showing you the email clients used to read your campaigns.
Admin console improvements
We have updated our new admin user interface and replaced the insert module and insert tag panels with the new Business Catalyst toolbox almost everywhere. With the new toolbox we'll make it easier for partners and business owners to insert and customize module or tags into pages, templates or system emails. The toolbox user interface will opened by default for partners for faster access to tags and modules.
Other changes
Some FTP improvements (better error codes, performance, etc) and SFTP support
DNS improvements (support for setting up Google Apps email out of the box, several bug fixes)
When you change your email address on adobe.com, it syncs automatically with BC
Various improvements of the caching engine for static assets
Issues fixed by May release
Issue 2869695 - Fixed an issue that broke the comments submitted by visitors by placing <br> tags after a random number of characters;
Issue 3317538 -     Fixed an issue preventing the social media modules from being reinitialized after pressing "Add to cart"
Issue 3317105 -     Files with spaces in the name do not get invalidated properly on FTP/API delete
Issue 3317478 -     Fixed an issue causing hardcoded http paths to generate security alerts when on https
Issue 2567045 -     Fixed an issue with Product Purchased with Details data field
Issue 2567131 -     Fixed an issue causing web app creation forms to generate [No Name] duplicates
Issue 3319245 -     Fixed the search function on Help & Support
Issue 3320623 -     Fixed an issue causing decimal prices to be incorrectly saved when editing/creating an order in admin and having the site admin language set to a country language that uses "," as decimal separator instead of "."
Issue 3325526 -     Fixed an issue causing the CRM Session verification to fail for session IDs that contain +
Issue 3162093 - Fixed a problem [AdminV4] HTML files for campaigns can't be edited
Issue 3009528 -     Updated multiline fields to allow line breaks
Issue 3010606 -     Changed FTP blog layouts listing to properly handle cases of invalid layout group names
Issue 3315646 -     Fixed an issue causing {tag_blogcategorylist}to not limit the number of results as set
Issue 3316323 -     Small bug/improvement at offline payments on copy/pasting the PDF password
Issue 2900590 -     Fixed an issue causing a correct web app item address to change to another one on some sites
Issue 3319299 -     Fixed some performance problems causing Edit Web Apps Settings -> Autoresponder interface to freeze
Issue 3320422 -     "Free shipping" not validated when enforcing shipping validation
Issue 2918069 -     Cannot save values properly for webapp items when the custom field uses comma separated checkbox list, and it has more then 265 characters for the list of values
Issue 2925458 -     Web App edit form is adding "X_" to the existing classes inside the description field. Every edit will add another x_ ending up in something like class="x_x_x_classname"
Issue 2567035 -     Can not list files in FTP when there are invalid characters or similar in the directory
Issue 3313655 -     Import fails if the username column values are already in the CRM
Issue 3315485 -     Varnish cache is not invalidated when overwriting files with %20 in the path
Issue 3315372 -     When adding a new item in the admin the address fields is pre-populated
Known issues and limitations
Product list layout outputs the products using an unordered list, requiring CSS for better formatting
Favorites module does not support multiple templates (layouts)
Module detail views do not support multiple templates (layouts)
Recursive modules are not supported in email campaign preview
Dreamweaver design view, ignores the custom template and always renders the tags from the default template (layout)
For more information about this, follow the release announcement on the Business Catalyst blog: Introducing our feature packed September release!

Thanks Mario, what is missing from the post and this notification is a fundamental pieces of information "TIMES". This is not just your info but also the release by Jackson Palmer on the blog - totally missed there also
We need to be notified of the sceduled timing of this release not just a vague date which is not specific globally
25th but we are global - what time specifically 0100am PST is very different to 1030pm PST , the latter being 26th in AU
Why - because campaigns scheduled for around this time can be impacted, and also if the sites go offile during the maintenance window campaigns can be a wasted exercise.
Previously mid week schedules have been a matter of heated discussion, yet the support guys say that schedule ahas not been decided upon
Not planning is planning to fail, and we have witnessed that all to ofetn in the past. BC unfortunately has a history of failing to plan and inform, and this does little to activate confidence in the community.
I have discussed with Dragos on numerous occassion how the missing ingridents at BC like communication, UX, planning and most importantly understanding from the customer perspective (rather than backroom coders).
eg at 645am 26th of Sept 2012 we have a email campaign scheduled ( and can be rescheduled ), the issue I see is without your maintenance window timings being published in a timely manner how can we tell if we move to a sooner or later timing. You have to agree it is disasterious marketing to blast out a campaign and find systems down when customers open newsletter offers and want to shop then.
If the time schedule is listed somewhere else even more shame that it is overlooked as an inclusion here plus that Chat team are not informed and kept up to date and the blog is just fluff sales and chest beating. That is not support of partners regargless of paid or free status.
To much time is wasted with this sort of unthinking about unpublished / incomplete notifications, Live chat guy wasted > 15 min of his and my time becuase they don't know either, how many others are being inconvenienced by fialing to plan and notify information to act upon, this communication in the blog is good info but by itself useless and creates more doubt and lack or faith. Just look at the "hope in the comments"

Release not triggered in PO

Hi,
I have used the class PO_release.This class is having the characters as doc type,pur org,net value,pur grp.
I assigned this class to the release group.One strategy defined based on this group.
In CL20N i have maitained the values for the characters.
When i trigger the PO release is not working.Please be informed that PO createdbased on the values maitained in the CL20 N transaction.
Kindly let me know why release not triggered.If i miss any settings let me know.

Hi,
I would say try this -
Remove all characteristics from class.
Then maintain only 1 characteristic in class and maintain characteristic value and match the value with the PO.
Try doing some dummy changes in PO and check whether system triggers release strategy.
If it is maintain values for other characteristics one by one and check the release.
Hope it works.
Thats how I manage such cases.
Regards,
Dipak

ISE version 1.2 patch 6 release notes

Hi Everyone,
I notice that Cisco has released patch 6 for ISE version 1.2 yesterday.
I am trying to locate the all the "resolved" issues for patch 6; However, when I look at the ISE release notes
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/release_notes/ise12_rn.html#wp407339
It only shows resolved issues up to patch 5.
Where can I find the list of "resolved" issues that comes with patch 6?
Thanks in advance.

Due to the high demand for patch 6, it was released prior to the release notes. The Release Notes will be updated within 24 hours.
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton

Photoshop CC 2014.2 release note ?

Hi everyone !
I've updated Photoshop CC 2014 this morning to latest release, via Creative Cloud application, and It seems impossible to find the release notes for this new version.
On the tooltip, there was a link to http://www.adobe.com/go/photoshop_152_info that lead to nothing... :s
It's quite frustrating since it seems new interesting features were implemented....
Thanks in advance for the help and good day to you all !
Cheers

Hi Fabrizio,
The link that you mentioned seems to be working now. Also check out the link mentioned by Eugene for new features.
Thank you for posting on Adobe Forums.

Report to Display Release Notes

How do we extract data that is displayed as long text in the Release notes scetion under each module or in other words where (table ) is it stored ??

ok but now in SE61 Document class is Release Notes
RELN and I know the Text keys as well ..I want to write a program to display the corresponding text provided in the release notes ... how do I go about it..

AC 5.3 Release Note Inquiry - Is it included in an Support Pack for AC5.2??

Similar Messages

Maybe you are looking for