AC - change incoming call alert wav files

Hi,
With CCM4.1(3)sr3a I need to change the audible alerts that AC plays when an incoming call arrives.
I've found the source files on each attendants PC (C:\Program Files\Cisco\Call Manager Attendant Console\audio), copied in a replacement & renamed it to Cisco's original file name.
However, on startup AC is copying the original files back from CCM.
If I changed the files on CCM then this would solve my problem but I can't find them.
How can I change the audio file source ?
Any help appreciated,
Paul.

The current capabilities and features of MoH include:
MoH multicast and unicast streaming service
Music streaming service for "user" hold and "network" hold
51 sources per media convergence server (MCS)
Fifty continuously looping .wav file sources
One real-time streaming source
Each source configurable as either unicast or multi-cast stream
Support for audio streaming to selected devices
Gateways (multicast only):
DT-24+No
6608Not until Seaview 3.3
VG200 (H.323)Yes with Cisco IOS. Software Release 12.2(11)T and later, enable the ccm-manager music-on-hold command
VG200 (MGCP)Yes, same as VG200 (H.323)
VG248Yes
Gateways (unicast only)AT-2/-4/-8, AS-2/-4/-8, and all other Cisco IOS. VoIP gateways, including Cisco 1750, 2600/3600, 5300, 58xx, and 72xx
Cisco IP phones (unicast, multicast)7910, 7940, and 7960
Cisco IP phones (unicast only)Cisco 7935, 12 SP+, and 30 VIP phones
Cisco IP SoftPhone (unicast only)
Maximum 250 simultaneous on-hold streaming sessions per server
Multiple server instances for application scalability
Multiple server instances for server load balancing and redundancy
G.711, G.729A, and wide-band audio codec support
Off-line audio translation utility
This URL should help you:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_qanda_item09186a0080094766.shtml

Similar Messages

  • Apple USB Modem - incoming call alert

    I access dial up through an Apple USB Modem. In the Modem tab of Network Preferences, I've asked my MacBook to "Notify me of incoming calls while connected to the Internet," by playing "alert sound when receiving a call." Yet nothing happens when I receive an incoming call: the calling line hears a busy signal, but no alerts, no messages, no internet interruption occurs on my MacBook.
    What am I missing? Do I need a certain type of service on my incoming phone line to make the alert work? (Because I use this line for internet only, I have no Caller ID, etc., on it.) Or should I change my MacBook settings in some way?
    Any advice would be much appreciated. Many thanks.

    You would have to subscribe to a call-waiting service from your telephone company on that line for the feature to work.
    However, if you use that line for internet only, would you be expecting voice calls on that line?

  • My incoming mail user .wav file doesn't play for incoming mails. It does work on local test.

    I have windows 7 Professional PC and use Mozilla Thunderbird 24.4.0 as my email account. I have a local .wav music file for incoming mail which tests OK, but when a new mail arrives it doesn't play. I have all the boxes ticked in the settings. Can anyone help please?

    An update on local .wav sound file for incoming TB mail messages.
    Driver Booster found outdated drivers and all have been updated.
    Sound device has been removed from the device manager and automatically re-installed.
    From advice given I have turned mail.imap.use_status_for_biff to "false".
    Still no sound from my local .wav file. Is my problem unique? Is 2.74 MB too large as a sound file?

  • Force Android phone to play incoming call alert so...

    Hi,
    I just recently started using Skype on both my desktop and cell.  I am using a Samsung S3 and LG Tone.  One problem that I am having is missing calls when in the following situation: 
    1. Not at PC. 
    2. Bluetooth device turn on.
    3. Not on a call / not listening to Bluetooth device (LG Tone). 
    I was thrilled with the exceptional standby battery life of the LG Tone (days) but one downside has been that now I am overriding the Android's audio output when I'm not on a call.  If there is a way to change this in Android itself please let me know.  I've tried changing the Bluetooth settings to turn off Media audio but that has not helped... here is how things work: 
    Bluetooth Media audio on: 
     - incoming call notification is audible on Bluetooth 
     - incoming call notification is not audible on phone
    Bluetooth Media audio off:
     - incoming call notification is not audible on Bluetooth or phone
    Ideally I'd like the phone to play the Skype notification sound and have the headset "ring" since this causes the headset to vibrate as well.
    Thanks,
    Dave

    Settings>Phone>Call Waiting...If you turn this to "off", the calls will go straight to voicemail.

  • Incoming call alert

    Is there a way to make incoming calls show as a banner instead of interrupting what I'm doing on the phone? Sometimes I don't want to answer or answer right away, and would rather not reject the call.

    Settings>Phone>Call Waiting...If you turn this to "off", the calls will go straight to voicemail.

  • My incoming calls aren't showing up on my screen and I can't hear any of my alerts, notifications, etc. what's up???

    My incoming calls aren't showing up on my screen and I can't hear any of my alerts, notifications, etc. What's up???

    This is probably some corruption in the settings file that stores the on-screen position of the Firefox window. Could you try the steps in this thread: [https://support.mozilla.org/en-US/questions/980358 opens off monitor screen]. Any luck?

  • How do I change the key of a wav file?

    I'm using Apple Loops Utility and the wav file plays the correct key & tempo there. But when I save it, and open it up in LE or add it into the arrangement, it's playing the original key? The only thing that is correct is the tempo. Can you change the key and save the change using Apple Loops Utility?

    I'm confused. Are you saying that in Apple Loops Utility the wav plays in the key and tempo of that wave, but when you add the same wav to LE it plays in a different key? You said in LE it plays in the "original" key. Seems like that is what you would expect. I would think it would play in the "original" key in both ALU and LE.

  • Why did Apple change the incoming caller photo Id to a small picture in a small circle instead of the large full screen picture when calls are received?  This is useless.  If it isnt cchanged back to the way it was I am done with the iphone.  Hello Galaxy

    This will be my last iphone if thhis minor software issue is not cleared up.  I hate the new caller ID incoming picture.  Too small

    We are all users like yourself. No one here is an employee or representative of Apple. We cannot know why the photo of the incoming caller was changed. We can only say that it is what it is. If that feature change is enough to make you want to change phones then get the phone that best suits your needs. In the meantime you can send feedback to Apple here:
    http://www.apple.com/feedback/iphone.html

  • How do I change my incoming calls to view caller's phone number instead of name?  This is for numbers not stored in my contacts (i.e. Unknown)

    How do I change my incoming call view to see the "phone number" instead of seeing "Unknown" for contacts who are not stored in my phone?  Whenever a call comes in it says unknow instead on the phone number that is calling.

    You need to set up the accounts in System Preferences/Accounts, then activate Fast User Switching.
    That way you can quickly log in to your own account - then back to his.
    You should obviously have different passwords.

  • Does Firefox OS have a feature that alerts or notify's you if an incoming call has been redirected or diverted to your phone (from another phone)?

    Hi, Was wondering if
    Firefox OS have a feature that alerts or notify's you if an incoming call has been redirected or diverted to
    your phone (from another phone)?
    This feature was common in basic phones and feature phones but is absent on Android, Apple
    and Windows phones.
    It's useful if your operating a business and want to distinguish if an incoming call is a personal
    or a business call.
    Cheers
    Greg

    Hi GregCh,
    I understand that you would like a way to distinguish between incoming calls that were dialed directly to your phone number, and incoming calls that were forwarded to your phone number (from another phone).
    Unfortunately, there is no such feature in Firefox OS that I am aware of. Forwarding services such as Google Voice may have settings available that would allow you to distinguish the forwarded incoming calls, but I am not entirely sure.
    Please let us know if you have any other questions about your Firefox OS device.
    Thanks,
    - Ralph

  • Alerts only working half the time, phone only rings half the time on incoming calls,settings all ok

    my alerts for text messages, vip emails and voicemail are only sounding half the time and same with phone ringing on incoming calls...have checked settings, all are ok, have powered phone down and back up..any suggestions why i dont get alerts and phone ring all the time?

    You can use http://support.apple.com/kb/ts5180. if that does not work you have to do repair.

  • Changed wav file names – files unrecoverable

    Hi. I was asked to import some important imterviews made on an iPod mini and an ExtremeMac Micromemo onto a Mac, but, as requested, I change the file names first. Since changing the file names the files are completely unplayable, undownloadable and unrecoverable. Please, can anyone help.
    Matthew Whiting

    Hi Chris
    What I did was to change the file names of the wav files in the Finder while they were still on the iPod Nano, before downloading them to iTunes. The iPod Nano uses a hybrid file system, and once the file names were changed iTunes refused to recognize the files. The Finder and Mac OS X flags them as wav files but cannot read them. All other software (players, audio apps and file recovery apps) that we have attempted to use, whether on Mac OS X, Windows XP and Vista, and Linux Red Hat has either crashed, failed to read the files or ignored them. Changing the file names back to an arbitrary time, similar to the original, still does not help.
    It's hard to appreciate the problem, but two of us with many years of Mac (and other IT) experience spent three hours yesterday, on a total of 6 computers, trying to get something to read or recover these files, without any luck whatsoever.
    Thanks for your interest.
    I might be able to get my hands on some industrial strength recovery software, today, and then we'll see. The problem, however, is that the data of the files is intact, but absolutely nothing succeeds in reading them as wav files.
    Matthew Whiting

  • Change wav file names on iPod - unreadable

    Hi. I was asked to import some important imterviews made on an iPod mini and an ExtremeMac Micromemo onto a Mac, but, as requested, I change the file names first. Since changing the file names the files are completely unplayable, undownloadable and unrecoverable. Please, can anyone help.
    Matthew Whiting

    Hi Chris
    What I did was to change the file names of the wav files in the Finder while they were still on the iPod Nano, before downloading them to iTunes. The iPod Nano uses a hybrid file system, and once the file names were changed iTunes refused to recognize the files. The Finder and Mac OS X flags them as wav files but cannot read them. All other software (players, audio apps and file recovery apps) that we have attempted to use, whether on Mac OS X, Windows XP and Vista, and Linux Red Hat has either crashed, failed to read the files or ignored them. Changing the file names back to an arbitrary time, similar to the original, still does not help.
    It's hard to appreciate the problem, but two of us with many years of Mac (and other IT) experience spent three hours yesterday, on a total of 6 computers, trying to get something to read or recover these files, without any luck whatsoever.
    Thanks for your interest.
    I might be able to get my hands on some industrial strength recovery software, today, and then we'll see. The problem, however, is that the data of the files is intact, but absolutely nothing succeeds in reading them as wav files.
    Matthew Whiting

  • My phone doesnt show incoming call and it doesnt ring. Further the iphone4 is extremely slow with opening whats app, camera and photos or while in the program it just closets. Who can advice me what to do??? Otherwise this phone will be changed soon

    My phone doest ring with incoming calls, but it also doesnt show someone is calling. I only see it, when i get the txt of missed calls.
    Further the phone is extremely slow with opening whats app, emails, photos, camera and it closets the programs while using it.
    I have many people around me with iPhone having the same complaints, but nothing has changed yet.
    Please Apple solve this quickly otherwise the iPhone i enjoyed so much will be remplaceren with a Samsung

    esme43 wrote:
    ...  the phone is extremely slow with opening whats app, emails, photos, camera and it closets the programs while using it.
    See this discussion...
    https://discussions.apple.com/message/23731048#23731048

  • I´ve just changed my apple id password, and when trying to use Facetime, after having entered such new password, it won´t fullfill the calls, nor can I receive incoming calls, it simply gets disconnected. What do I do??

    I´ve just changed my apple id password, and when trying to use Facetime, after having entered such new password, it won´t fullfill the calls, nor can I receive incoming calls, it simply gets disconnected. What do I do??

    iOS: Troubleshooting FaceTime                  
    Unable to make or receive FaceTime calls after April 16, 2014
    Using FaceTime and iMessage behind a firewall
    iOS: Troubleshooting FaceTime and iMessage activation
    iOS: Using FaceTime                               
    FaceTime, Game Center, Messages: Troubleshooting sign in issues

Maybe you are looking for

  • Open picture - Urgent

    I have a page in which a picture in displayed. Requirement If the user clicks on that image, the image should open in WPFV (Windows Picture and Fax Viewer) Please assist! Thanks.

  • Error in Dunning Data

    Hi all, I had small issue with my project. The user is trying to change the dunning procedure in Customer Master Data. The system is throwing an error saying that "System error in module KNB5_DEFAULT_ANZIEGE, table XKNB5" Do you know what the problem

  • Excel and Macro with Labview

    Hello every body, I have to read to excels files int order to treat them and generate graphs ( 3 graphes) in another excel file. to do that, i want to use the Macro for Excel. How can i do, I want to write my basics codes VBA even in Labview. Tks for

  • I'm trying to install iTunes on a PC running Win Xp remotely.

    It gives me two seperate errors when installing and won't go through with the install. The errors are as follows: C:/Program Files\Apple Software Update/ ScriptingObjectModel.dll failed to register. (HRESULT -2147010895) Apple Software update/ softwa

  • Oracle Test Manager - Repository query

    Hi, I wanted some clarification and some help. I presume the default repository in OTM is pointing to the the C Drive (i.e. where all my OFT file structure is stored). When I check the Path it says ./OFT/ but when I try to create a new reporsitory, i