Accept AS400 to send email to Exchange Server 2010

Settings on Exchange to accept emails from our AS400

Exchange Receive Connector is responsible for receiving emails.
You can refer to the following article to know how to configure the connector:
http://technet.microsoft.com/en-us/library/bb690954(v=exchg.141).aspx
If you have further questions, please let me know.
Thanks.

Similar Messages

How to configure canon ir 2250 to send scans to emails via exchange server 2010

Hello
I have one question:
How to configure canon ir 2250 to send scans to emails via exchange server 2010?

Hi,
Based on my research, the member limit of a distribution list depends on the scalability and performance of your environment:
http://blogs.technet.com/b/exchange/archive/2009/02/19/3407003.aspx
Thanks,
Angela Shi
TechNet Community Support

Can we send bulk email through exchange server 2010

can we send bulk email through exchange server 2010

You can do this however not sure I would recommend that since if people complain they are getting spammed it could effect your production servers domain/IP, i.e. it could get black listed. Personally I always recommend using a different system for
email blast to protect my production IP addresses and also to keep the load off of exchange as well as email marketing systems have built in capabilities for reporting, opt in/out capabilities etc.
All of that said perhaps you can tell us more about what exactly it is you want to do and how often?
Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003 -->
2007 --> 2010 --> 2013 with Lucid8's
DigiScope

Set time restriction for specific user to send email via exchange server

Is it possible with Exchange server to limit certain users to sending their mail (Outlook/Exchange) only between designated
times? Thanks.
Babu

Hi Babu,
Based on my knowledge, Exchange has no built-in function to restrict some users sending their messages in a period of time. Your understanding will be appreciated.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Send email with exchange server

I am able to receive email on my phone through my work MS exchange server, but I can not send. Others using different phones (IPHONE) are able to receive and send. Any suggetions?

I would have to agree with bearone21, double check your server settings with your IT department. More importantly, check the outgoing settings. Confirm the settings are correct in the phone.
You can find the steps here
Is there anyone else at your place of business that has a Droid? Are they having the same problem sending email?
If you need to, you can remove the email address from the Droid X and set it up again.

Problem sending emails with exchange server

Hello,
I have a MacBook pro OS X 10.9.2 and I am unable to send emails through Mail (I have an exchange account). Everything was working well until yesterday: I could send and receive emails through my exchange account using Mail. I can still receive all my messages but I can't send anything now.
My internet connexion is fine, and I am able to connect to my exchange account on internet. I also have an ipad and I don't have any problem sending/receiving emails. Can somebody help me with this issue ?
Thanks a lot in advance !

OS X Mail: Troubleshooting sending and receiving email messages

Allow 3rd party software to collect emails from Exchange server 2010

i have a hosed client based ticket system that i use for my internal and external customers. i would like to have each person who wants to create a ticket use and an email address [email protected]
I've already created the email address and it works for internal and external. you can access the account using OWA. the problem i'm having is the hosed 3rd party software wants to connect and collect emails every 15 minutes. the directions they have use
IMAP and POP. how do i allow that 3rd party to collect emails from that email address? without created a security hole? don;t want to be hit by spammers or be on a blacklist. please help

Hi Donlancellotta,
From your description, I'm so confused that can't understand what your requirement is.
Could you explain more about your requirement?
What is the "collect emails" mean?
Best regards,
Niko Cheng
TechNet Community Support

Send As, Send on Behalf and Full Access for Exchange server 2010/2013

[This FAQ contains 2 parts]
Testing and watching the behavior of Send As, Send On Behalf and Full Access permission.
Common issue and Troubleshooting on the three permission.
[Testing and Watching]
Based on following blog, I decide to test on my lab:
Full Mailbox Access Rights + Send On Behalf = Send As ?
http://blogs.technet.com/b/ehlro/archive/2012/04/06/full-mailbox-access-rights-send-on-behalf-send-as.aspx
Description on my lab and test:
Exchange 2010 + Outlook 2010
Exchange 2013 + Outlook 2013
Senders: A01, A02, … , A07, A08
Recipient: A09
A01 grand permission to other senders.
Two methods:
a. Use A0x’s credential configure A01’s profile, then send From both A01 and A0x via Outlook. Watching result in A09’s Inbox and Sent Items which has message copy left.
b. Use A0x’s credential configure A0x’s profile, then send From both A01 and A0x via Outlook. Watching result in A09’s Inbox and Sent Items which has message copy left.
Result as following forms:
1. Exchange 2010 + Outlook 2010 / Exchange 2013 + Outlook 2013
Using A0x’s credential configure A01’s mailbox, then send From both A01 and A0x
To A09.
2. Exchange 2010 + Outlook 2010 / Exchange 2013 + Outlook 2013
Using A0x’s credential configure A0x’s mailbox, then send From both A01 and A0x
To A09.
[Common Issue]
1. [Issue]
Exchange 2010 + Outlook 2010. A01 grand A03 Send As permission. However A03 can’t send as A01 to A09 and get NDR:
You can’t send a message on behalf of this user unless you have permission to do so. Please make sure you’re sending on behalf of the correct sender, or request the necessary permission. If the problem continues, please contact your helpdesk.
Details as following pic:
[Troubleshooting]
1) Based on the NDR, it seems a permission issue. Check Send As permission, however the Send As permission configured correctly. Pic as below:
2) ince the Send As permission configured correctly, it seems the permission hasn’t been replicated. Try to restart Microsoft Exchange Information Store service. It works.
Note: The Send As permission isn’t granted until after replication has occurred. Replication times depend on your Exchange and network configuration. To grant the permission immediately, stop and then restart the Microsoft Exchange Information
Store service.
2. [Issue]
Exchange 2013 + Outlook 2013. A01 grand A03 Send As permission. However A03 can’t send as A01 to A09 and get NDR:
Your message did not reach some or all of the intended recipients.
Subject: xxx
Sent: xx/xx/2014 8:20 AM
The following recipient(s) cannot be reached: A09
This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80070005-00000000-00000000].
Details as below:
[Troubleshooting]
1) Also check the Send As permission configuration first.
2) Then try to use A03 send as A01 to A09 via OWA. If OWA works well, it seems and issue on the Outlook client side.
3) This behavior may occur if the OAB in Outlook isn’t updated. Try to download OAB manually.
4) If doesn’t work, please close Outlook and try to delete all the OAB folder on your computer. The path of OAB folder in Win7, Win8 as below:
\Users\<UserName>\AppData\Local\Microsoft\Outlook\Offline Address Books
5) Restart Outlook.
Note: Be aware that you cannot send e-mail messages on behalf of a mailbox if the mailbox is hidden from address list. When sending a message, Exchange requires that e-mail address is resolved in the
From field.
3. [Issue]
Exchange 2010. A01 grant A0x “Send As” or “Send on Behalf” permission. A0x send as/ send on behalf of A01. The message is only copied to the Sent Items folder in A0x’s mailbox (same as the result of my test). Also cannot configure Exchange 2010 so that the
message is copied to the Sent Items folder of both A01 and A0x.
[Troubleshooting]
This issue occurs because Exchange server 2010 was designed to copy message to the Sent Items folder of the sender only. This issue can be solved by installing Exchange 2010 SP2 UR4. More details in the following KB:
Messages that are sent by using the "Send As" and "Send on behalf" permissions are copied only to the Sent Items folder of the sender in an Exchange Server 2010 environment
http://support.microsoft.com/kb/2632409/en-us
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Nice guide Mavis, I recently explored the same topic. Few things you might want to add is the type of connectivity (Cached vs Online will produce different results) and to expand further on the methods of adding the other mailbox in Outlook (additional mailbox
vs additional account defaults to different methods). Check the screenshot:
And please post this somewhere more visible, like blog/wiki page.

Exchange server 2010 can send email but can't receive email

Hi, I currently built up the exchange server 2010 within Windows 2008 server R2..I followed the youtube exchange server guide and now I am able to receive and send email within the account I created .. I can send email to hotmail or gmail account that I
have. But I can't receive the emails from those. And I have a free domain service from twbbs.org My FQDN is: al7283.twbbs.org . and I 've setup the MX records on this even though I don't know if they are correct configuration. I've open up
the ports that needed. I also created the MX records and A records within DNS server .. can anyone guide me and tell me what should I configure for this troublesome problem??

ON your receive connector check the security.
in console
1) server config
2) hub transport
3) receive connectors (Default <server name>) this should be listning on port 25
4) right click and properties
5) select permission group tab
6) Anonymous needs to be checked otherwise you will only receive email from servers that have a username/password on your email server.
7) Restart transport service and try again.
Your DNS config looks over complicated create a MX record 10 called Mail.al7283.twbbs.org
point to al7283.twbbs.org
You don't need mail.al7283.twbbs.org "A record" or a MX pointing to 122.116.90.148, it's the same as the other MX record if one is down they both will be.

Exchange Server 2010 SP3 test environment - email flow to/from internet

Today I set up test environment for Exchange Server 2010 SP3 - domain controller running Windows Server 2008 R2 SP1, Exchange Server 2010 SP3 on Windows Server 2008 R2 SP1 and client computer running Windows 7 Pro SP1 x64 with Outlook Pro 2010 x64. These
machines are VMs on vSphere 5.0 cluster made of 4 esxi 5.0 hosts.
I have three years of experience in working with Exchange Server 2010 in my production environment but until recently I have not had enough resources to build a test environment. Does "testing" Exchange Server 2010 infrastructure have
a real life purpose considering the fact that only internal email flow is possible since authoritative SMTP accepted domain is not hosted anywhere thus not visible to outside world. This limited email flow combined with absence of possibility to test
ActiveSync, Outlook Anywhere, OWA from WAN, . . . really hurt and make Exchange Server rare technology that can not be tested completely before introducing something new into the production. Services that are not possible to test from the outside world are
useless and whole point of Exchange-like technologies is availability from anywhere and from whatever device.

I set up Internet Send Connector (by default this type of send connector uses DNS MX records to route email automatically). Having sent an email to my gmail account I did not receive it and in transport logs I saw that mx record was found successfully
but there is the following line:
2014-08-05T20:39:51.942Z,Internet Connector,08D17F000FE36010,1,,2a00:1450:4013:c01::1b:25,*,,"Failed to connect. Error Code: 10051, Error Message: A socket operation was attempted to an unreachable network 2a00:1450:4013:c01::1b:25"
I tried also to send an email to my production email address (we have Symantec Messaging Gateway which is used as a smart host (antispam,antimalware,content filter appliance)) but then error is:
2014-08-05T20:50:08.395Z,Internet Connector,08D17F000FE36019,1,,91.238.7.10:25,*,,"Failed to connect. Error Code: 10061, Error Message: No connection could be made because the target machine actively refused it 91.238.7.10:25"
Telnet from test exchange to 91.238.7.10 on port 25 also is not working.

Email language wise forwarder in specific DL on Exchange Server 2010

Dear All,
Can we set email language wise forwarder in specific
DL on Exchange Server 2010.
Below is the scenario :
I have 4 users who sent mail to DL(DL-IT) in different languages like Dutch, German, English, now I want to set email forwarder on DL-IT like if someone send email in Dutch language then Dutch language
email should be forward to another DL (DL_DUTCH) and same for other language.
Thank you in advance.
Pradip Sisodiya

Hi Pradip,
afaik there is no solution based on a DL object. While saying that, if you had to handle only organization internal senders you may try like that:
1. please set the language property for all your mailboxes ; I guess you can do that based on the OU / Location the user objects lives in.
2. now in Exchange 2013 and Exchange 2010 there will be a Header for the language like that
Content-Language: en-US
Accepted-Language: en-US
(the language, en-US in my example, at the RHS will Change if you changed the Languages property of that Mailbox.)
3. finally you can add Transport rules to forward based on the Content-Language or Accepted-Language
a. Setting in
mail flow -> rules -> create a new rule (choose no template) -> more Options -> add condition --> apply this rule if ... -> a message Header --> enter text (= Content-Language) & enter text patters "language", as en-US
plus (=add condition) the recipient is your DL
b. do the following : Redirect the message to --> your recipient
c. save that rule.
if you ran the get-transportrule cmdlet, it Looked like that:
(you better create it once for initial testing and afterwards you can Export / Change that rule and use new-transportrule to apply the other languages / recipients)
If that Content-Language Header is present on the message, that rule will work as you expected.
Please remember to add the language property to your Mailbox. if you ran
$mymailbox = get-mailbox
$mymailbox.language
it really Needs to have the value you expected on the RHS of your Header condition.
Regards,
Martin

Cannot send email from Exchange 2007 to Exchange 2013

Hello Anyone,
Anyone can help? I've prepare MS Exchange 2013 already, for Migration MS Exchange 2007 and I got the issue.
My issue is I can't send email from Exchange 2007 to Exchagen 2013, but for Exchange 2013 can send email to Exchange 2007,
is my issue only internal email for external email both Exchange server is working fine.
Regards,
Eakkasak

Thanks for your reply, when I send email from Exchange 2007 to Exchange 2013 I'm get the error message below.
Delivery is delayed to these recipients or distribution lists:
Eakkasak Buajan
Subject:
This message has not yet been delivered. Microsoft Exchange will continue to try delivering the message on your behalf.
Delivery of this message will be attempted until 8/29/2014 8:30:29 PM (GMT+07:00) Bangkok, Hanoi, Jakarta. Microsoft Exchange will notify you if the message can't be delivered by that time."
I'm already tick "Exchange server Authentication" in the Default Receive connector properties of Exchange 2013"
I'm restart services and restart all Exchange Server but doesn't work.
Thanks,
Eakkasak
Sent by Microsoft Exchange Server 2007

Exchange Server 2010 SP3 RU 8v2 & ActiveSync Device Quarantined Emails

Hi there,
We are using Exchange Server 2010 SP3 and I recently installed RU 8v2. We always had an ActiveSync Access Policy in place where the devices are quarantined until an Administrator goes in and approves or rejects this.
Prior to installing RU 8v2, there used to be a link in the email sent to Administrators to click on to login to the ECP and approve this device. However, since the install of this update, there is no link in the emails now. It just informs you that you need
to login to ECP and view the quarantined devices. Has this been removed in the RU?
Thanks

Hi,
According to your post, I understand that quarantine notifications e-mail will not send to administrators after install Exchange 2010 SP3 RU8v2.
If I misunderstand your concern, please do not hesitate to let me know.
Please login ECP to double check the Allow/Block/Quarantine list rule configuration, for your reference:
http://blogs.technet.com/b/exchange/archive/2010/11/15/3411539.aspx
Besides, Exchange 2010 SP3 RU 9 has released on March 17, 2015. Please upgrade to latest version.
Additional, this issue is related to ActiveSync. Please We recommend contact Mobility and ActiveSync Team so that you can get more professional suggestion.
Please refer to:
https://social.technet.microsoft.com/Forums/exchange/en-US/home?forum=exchangesvrmobility
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

Exchange server 2010 unable to send internet mails to some domains but receives mail

Hi all, I have exchange server 2010 deployed and can receive mail with no issues but cant send mails to some external domains. I can send mails to gmail some others. Yahoo! is among the domains that rejects mails originating from my exchange server. Is
there anyone to assist please?

You can start here.
http://www.dummies.com/how-to/content/how-to-get-removed-from-an-email-blacklist.html
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Exchange Server 2010 - Problem configuring my server 2008 so my clients can use Outlook to send/receive e-mails

Hi,
I am new to the servers and domains stuff. Therefore i have setup succesfully a Server 2008 R2 server with AD, DHCP, DNS roles installed. I configured the roles as i wanted and then i installed Exchange Server 2010 so the clients can use Outlook to send
receive mails in and out of the domain.
I can send/receive mails inside the domain (disalfa.com) but i cannot send/receive mails outside the domain. I configured the Exchange properly, i am sure of that. I am 99,9% i did something wrong with the DNS (A records, MX records, etc.).
Also is there something i must do from the control panel of the site i purchased the domain name and the mails?
Can someone guide me so i can manage to work this out?
Server 2008 - 192.168.1.250
Registered Domain - disalfa.com
Thank you in advance

Hi ,
I recommend you refer to the following article to configure your external mail flow:
Configure Internet Mail Flow Directly Through a Hub Transport Server
Prerequisites
Register MX resource records for all accepted domains in a public domain name system (DNS) server. Consult the documentation of your DNS provider for information about how to register MX records for your domain. Detailed procedures about how to complete
this step are outside the scope of this topic.
Configure network gateways to allow SMTP traffic to and from the Hub Transport server. Consult the documentation for your network routers and firewalls for information about how to route SMTP traffic to and from the Hub Transport server. Detailed procedures
about how to complete this step are outside the scope of this topic.
Best regards,
Niko Cheng
TechNet Community Support

Accept AS400 to send email to Exchange Server 2010

Similar Messages

Maybe you are looking for