Access Connections refuses to run - X200 XP

Either something changed (an update?) or something I inadvertently did that has caused Access Connections to no longer run. The wireless connection is working fine and all of the Fn - x buttons work fine and I am not aware of any other issues with my X200. I just performrd a system update and the Access Connections driver was one of two recommended updates which I performed so presumably I have the latest version. Whether I start it via start menu, thinkvantage button, or from the wireless radio panel, the hard drive light flashes like something is being loaded but after a few seconds the flashing stops but no program starts nor is there any error message.
Hopefully someone here could shed some light on what might have happened and how to resolve it....any help will be much appreciated.
*Smith & Wesson...the original point and click interface*

xwray wrote:
Either something changed (an update?) or something I inadvertently did that has caused Access Connections to no longer run. The wireless connection is working fine and all of the Fn - x buttons work fine and I am not aware of any other issues with my X200. I just performrd a system update and the Access Connections driver was one of two recommended updates which I performed so presumably I have the latest version. Whether I start it via start menu, thinkvantage button, or from the wireless radio panel, the hard drive light flashes like something is being loaded but after a few seconds the flashing stops but no program starts nor is there any error message.
Hopefully someone here could shed some light on what might have happened and how to resolve it....any help will be much appreciated.
Download ThinkVantage Access Connections
Remove any and all versions of access connections-sometimes it will install on top of the previous version- (make sure to delete the application folder as well). Reboot and reinstall using the download from the link posted above (confirm it is the latest release). Access connections can be a little temperamental at times, usually the above steps will resolve the issue.
Currently own: X220T, X201, X200, T61 X2, X61T X3

Similar Messages

Access connections 5.85 cannot run on this profile

Hello to lenovo forum.
I had installed on my lenovo 3000 n500 so far all new access connections packages with no problem till version 5.72.
From version 5.83 and now already 5.85 i get on start up an error saying ac cannot run on this platform.
However i can connect to internet smoothly and i can access ac user interface from start-programs menu since tray icon also misses from desktop.
My notebook is
Lenovo N500 (4233-4AG) 32 bit
Operating System:Windows Vista Service Pack 2
Now here starts my analysis of queries.
1. from http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-67283
we can see that supported systems are among others Lenovo N100, N200 ,and this is common for versions 5.83-5.85 and earlier ones.
so my n500 is supported from both versions 5.85 and 5.72,since ac drivers for n series work on 100 200 and 500 series.
2.So i guess it's a matter of prerequisites.
Now let's compare Software and Device Driver requirements Before installing ThinkVantage Access Connections
a.for version 5.85 that's latest which misfunctions for me when installed
http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-67283
with b. version's 5.72 prerequisites which is the last smoothly working on my N500 model.
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/85cv28ww.txt
From comparison of the prerequisites for [For the other ThinkPad models] we can see that version 5.85 does not have any higher versions prerequisites than 5.72.
So what is the problem?
3.My wifi lan adapter is model Intel Wireless WiFi Link 5100 AGN version 13..4.0 installed a year ago with no problems working with access connections 5.72 and covering prerequisites for driver version Intel Wireless LAN (11abgn, abg, bg) for Windows Vista version 12.4.0.21. as mentioned on lenovo site.so no real problem with this.
4.But let's insist a liitle more on prerequisites.Maybe i really need
a.ThinkPad Power Management driver for Windows Vista/XP/2000/ME/98 SE, version 1.42 or later.
b.Hotkey Features Integration for Windows 7/Vista/XP/2000 version 3.02.0000 or higher.
Here we can see.
a.from http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-4GXPEG
that lenovo 3000 N series is not [vista] supported .
So my N500 model needs Power driver not from this url but from lenovo's support - download drivers and software selecting my configuration files i find Power Manager for Windows Vista - Lenovo G530 (MT 4446 only), N500 version
0.64.0.9 which is already installed and the latest one for my n500 model.
So no particular version exists apart from what i have already .since it works with 5.72 it should work with 5.85
lenovo has not updated any PM driver version for N500 model and i can find it as final on support site for my model
b.now my guess refines to a driver update for hotkey features.
but access connections points to http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-74261
where lenovo N series is not supported.
So with little search i found http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGr-68000
which seems to be the proper for n series and the right ones.
5.Now the real questions
1.on
http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGr-68000
are these the right drivers for my n500 model on screen display?
2. if yes latest version is 2.23.0000 http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/6jvu34ww.txt
and read me file says that onscreen display version is 5.32
I have on my laptop version 5.13 of on screen display installed,may this be the upgrade to 5.32 needed to work access connections 5.85 on my n500 model right?
also i have presentation director version 4.a on my laptop and at http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-74261 asks for hotkey features to work
"For Windows Vista/XP only) It is required to install Presentation Director version 4.04 or higher." and url redirecting there
should i have also this to upgrade?
3.from main access connections dowload page redirection to "Hotkey Features Integration for Windows 7/Vista/XP/2000 version 3.02.0000 or higher" that's http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-74261
we see that package 3.02 which is needed has onscreen display driver version 6.02
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/6wvu50ww.txt
will version 5.32 for my n500 model when installed cover this demand for driver version?i see that system interface driver minimum demand is version 1.01 which is already installed so no real problem with this driver.

I think its because the Lenovo 3000 & Valueline Systems are going to the idea-brand so the support for thinkvantage software is ending for those systems , so you might want to go back to the version that was working
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

Enable auto connection with Access Connections?

I was wondering if anyone could tell me how to make my T61 connect to my mobile broadband internet connection automatically when coming out of sleep and/or hibernate? Can it be done through Access Connections? I'm running the latest AC on Vista 64.

You can set Access Connections to connect to your WAN if none of the other wireless profiles are available.
Open Access Connections and in the upper right, switch from Basic to Advanced.
Go to the Tools tab and click on Location Switching.
The bottom check box can be set "When no other connections are available, connect through WAN or WiMax"
Set that and click Ok.

802.1x wlan authentication wont work with Access Connections

Hi - hope someone can help. I have a WLAN configured to use 802.1x authentication using PEAP, passwords and an internal CA.
I can conect and authenticate a wireless client using the inbuilt windows wireless client; i am unable to connect when i configure Access Connections on the same computer with the same wireless settings. This is really annoying.....
The version of access connections is 5.21 running on windows XP SP3. Laptop is T61.
The connection fails as Access connections seems to think that there is no certificate installed on the client; there is and of course this would not have worked with the windows wireless client.
error message is:
The identity of the server was rejected. Verify that the correct server name has been specified in the 'Validate Server Certificate' section of the profile.
Any suggestions appreciated.
Thanks.

did you find any resolution to this? our mba- mid 2013 deployment is having a very similar problem. We've gone through loads of troubleshooting and have yet to come to a resolution. all our mid 2012 mba's are working fine they're 10.7.5/10.8.4 mixed. console logs don't show much, i'll try the wireless diags tomorrow. our other 10.8.4 build appears fine on other models of machines. i've read posts about deleteing the adapters, deleting the system config plists and changing the mtu size, these steps do not work for us.
we don't have as high a failure rate with our deployment, but 25%-30% of our clients randomly drop connectivity and are unable to reconnect (fluttering wi-fi wave). when you slect the wifi symbol in the menu bar other wireless networks do not show, the 'looking for networks' fly wheel continues to spin. ocasionaly on login the yellow jelly bean will appear then disappear before finally timeing out without logging the user in (depsite having mobile accounts enabled). mostly the problem manifests itself when waking from sleep - the wifi symbol flutters endlessly without connecting. deleting the 8021x profile and readding it will reenable connectivity. we've tried new profiels, but to the same end. i know our certs and systems are fine because previous mac os x builds work fine as do our windows clients.
any input would be much appreciated.

Unable to edit or delete profile in Access Connection 5

Hi Everybody!
I'm unable to edit or delete profiles in Access Connection on my T41 running latest Access Connection v5.
The edit and delete buttons on the Access Connection Profile menu are shown only in light grey color and it's not possible to click them. I have administrator rights on my machine. These profiles were initially migrated from a very old v3 (automatically during system update) and I guess that this is one of the root causes of my problem.
I have also tried to use the QCTRAY.EXE /DEL command, but that's also not working. The profiles just remain there unchanged.
I would be very pleased if somebody could give me a hint on how to overcome this boring problem.
Best regards,
Helmut
Solved!
Go to Solution.

v3 profiles are not compatible with v5.
The best solution in your case would be to uninstall Access Connections with profiles and then reinstall and create new profiles.

Can't Uninstall access connections Vista

Hi
I can not uninstall access connection from my T60p running vista... I get no information from uninstalls app...just nothing happens...is there any way to run a manual uninstall?
Thanks

I figured it out. You can reboot in safe mode. Then go to add/remove software and it will let you uninstall it.
Tim

(nQSError:10018) Access for the requested connection is refused

Hi Techies,
Good Afternoon!!!
Recently I faced a problem when I tried to view the data of my table in PHYSICAL LAYER
(nQSError:10018) Access for the requested connection is refused
(nQSError: 43037) Invalid Catalog, SupplierSales, specified.
I did check my config file, every thing is proper. Even in NQSERVER log file it is showing that Finished Loading with out error.
Same with the case of Answers. When I tried to login with administrator, it is throwing the same error as in RPD.
I am unable to figure out the problem.

Check you System DSN , ODBC > System DSN > AnalyticsWeb
Make sure you have NOT enabled the "Change default repository to" or "Change default catalog to" as SupplierSales in either.
Hope this helps.
Thanks,
-VS

LDAP : Access for the requested connection is refused.

Hi
After successfully connected to ldap server through OBI rpd , I imported the users and created init. blocs and variables.
But when logging into dashborad/Answers i am getting the following error :
Error Codes: OPR4ONWY:U9IM8TAC
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused. [nQSError: 13024] Successful completion of init block 'oidAuthentication' is required. (08004).
Pls. help.

RPD users got preference over LDAP users i.e if you have a user with same name in RPD and LDAP, then RPD authentication will take place and not the LDAP authentication.
Now if you are importing all the users from LDAP to RPD, then LDAP authentication will not take place and creating INIT block for the same will through an error when trying to login to Presentation services (if Required for Authentiaction is checked).
Workaround
You can create groups in your LDAP and assign all your users to these groups.
Import groups to RPD and do group level authorization.
Do not import users to RPD and create INIT block for LDAP authentication.
Refer Oracle® Business Intelligence Server Administration Guide- 15# Security in Oracle BI for more details.

Network Connection Was Refused - PLEASE help me this time...

To be perfectly honest, I'm quite irritated. I want answers. And if there is no answer, I want someone to tell me such. I've posted three times before, twice on someone else's topic, and once on my own. This is my last ditch effort. PLEASE help me. I really enjoy the use of your product, and I don't want to give up on it.
Many people are having issues with their network connection. I know I'm not the only one. Some diagnostics say the connection to iTunes works, but for some reason still won't open the music store. In my case, it says it isn't.
I went to my parents' house this holiday and stole their broadband high speed internet connection, hoping that the new connection might make iTunes work. Nope. So now I'm fresh out of ideas.
Here is the information I posted on an earlier post below. PLEASE help me answer my question. I'm really missing my iTunes. It's been a long time since I've had it, and there are a bunch of songs I plan to download if I am able to get it back. Thank you so much!
I downloaded the newest version of iTunes, without realizing that there were so many problems with it. The installation went off without a hitch, and it was able to open up my library. However, whenever I try to access the music store, the message "iTunes could not connect to the Music Store. The network connection was refused. Make sure your network settings are correct and your network connection is active, then try again" appeared. I tried redownloading it, but that didn't solve the problem. I got frustrated, and finally was able to download 7.01. That didn't work either. So I downloaded the older version that I used to have. The same error message appeared. NOW I'm mad, because I can't even get the older version back. I want my older version back... I never had a problem with your products before, but right now I'm slowly losing faith. PLEASE help me.
I can't run a diagnostics on my network connection anymore, but I had posted my first diagnostics on the old post, referencing back to when I was still trying to fix the newest version. I'll post the diagnostics below the post.
I have a wireless connection, since I live in an apartment complex right now. I didn't have the same connection type when I first downloaded iTunes a year or more ago, but I was able to work iTunes under this connection before I uploaded.
Please help me. I want my music store back.
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Dell Computer Corporation Inspiron 1150
iTunes 7.0.2.16
Current user is an administrator.
Network Adapter Information
Adapter Name: {7BAB081D-F40E-4AF6-97A6-1C8958EEC8C7}
Description: Dell Wireless WLAN 1350 WLAN Mini-PCI Card - Packet Scheduler Miniport
IP Address: 172.17.0.73
Subnet Mask: 255.255.255.0
Default Gateway: 172.17.0.1
DHCP Enabled: Yes
DHCP Server: 172.17.0.1
Lease Obtained: Wed Nov 08 16:19:50 2006
Lease Expires: Thu Nov 09 04:19:50 2006
DNS Servers: 172.17.0.1
24.196.64.39
24.196.64.40
Network Connection Information
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Disabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was unsuccessful.
The network connection was refused.
Connection attempt to iTunes Store was unsuccessful.
The network connection was refused.
Secure connection attempt to iTunes Store was unsuccessful.
The network connection was refused.

this is atleast the third theard i have found on this... SOMEONE AT APPLE PLEASE HELP.. I HAVE THE SAME PROBLEM!!!

Access connections does not see wireless networks but can connect if you know the SSID

Running a Thinkpad x200 using windows 7 and Access Connections 5.42.
A few weeks ago i was traveling and was connecting to a hotel wireless network.
Could receive email but wasn't able to send email due to hotel port restrictions so long-story short version-- IT staff at hotel told me to connect via LAN. Which i did by simply plugging in LAN line to the thinkpad and to the hotel -- port -- no other changes. have done this a million times at home and elsewhere.
All is well....
until....
I get home and i notice that when i use access connections, it doesn't see any wireless connections (no icons in the radar screen). It automatically connects to my home network and i can use the home profile to connect. Same for any connection that i know the SSID for -- i can't see it but i can connect to it.
But it doesn't show any icons during "find" or find again. It only shows the home icon i am connected to. If i disconnect and try to find wireless networks. It doesn't show any.
So i know
1) radio is working
2) can connect via lan
3) can connect to a known wireless if i know the SSID and either manually configure it or if i have the profile saved
4) i have run antivirus, malwarebytes - etc -- all clean
5) have rebooted, turned radio on off
6) system restore doesn't help
7) all wireless networks are now invisible to radar screen. Have tried this at starbucks, around town - etc -- available wireless network icons are invisible
I'm not sure that hooking up LAN in the hotel did anything but it seems too coincidental. Also seem to recall a thread where this has been known to happen.
Help!!!

First off, it sees the networks. That's good. You reset network settings which usually corrects a number of problems. Let's focus on your home network and getting connected to that.
1. Reboot your router (just power it off for 10 secs). Try to connect. If it works, you are done. If not, step 2
2. Reset your network settings again. However, this time log onto your network by tapping Settings > WiFi > Other and re-entering your network name, security settings, and password.
Check your connection by tapping the blue > next to the network name with the checkmark. If your IP starts with 169.x, then you are connected but your router is not issuing you an IP address. This leads to a couple of additional problem areas - WEP encryption and outdated router firmware.
If you continue to have problems, tell us which router/model, security settings used, etc.

SCOM 2012 Issue The Data Access service is either not running or not yet initialized

Hello All,
My SCOM 2012 console all of sudden stopped working when I changed the size of the SQL database for the SCOM server.
The setup is all on a virtual machine running windows 2012, with SQL 2012 running SCOM 2012 SP1. Everything was working until I made the SQL server database size change.
Now I am getting an error when I try to open the SCOM 2012 console. It just says Failed to connect to server servername.internaldomain.com The Data Access service is either not running or not yet initialized. Check the event log for more information.
here is the logs from the console app (the application logs are below this)
Date: 2/11/2013 12:16:45 PM
Application: Operations Manager
Application Version: 7.0.9538.0
Severity: Error
Message: Failed to connect to server 'servername.internaldomain.com'
Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. ---> System.ServiceModel.EndpointNotFoundException: Could not connect to
net.tcp://servername.internaldomain.com:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0956135. TCP error code 10061: No connection could be made because the target machine actively refused it 192.168.X.X:5724. --->
System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 192.168.X.X:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
   at Microsoft.EnterpriseManagement.ManagementGroup.Connect(ManagementGroupConnectionSettings connectionSettings)
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.ManagementGroupSessionManager.Connect(String server)
   at Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindowBase.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://servername.internaldomain.com:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0956135. TCP error code 10061: No connection could be made because
the target machine actively refused it 192.168.X.X:5724. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 192.168.X.X:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it 192.168.X.X:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
Application Error: Event ID:1000
Faulting application name: Microsoft.Mom.Sdk.ServiceHost.exe, version: 7.5.2808.0, time stamp: 0x5082b3a5
Faulting module name: KERNELBASE.dll, version: 6.2.9200.16451, time stamp: 0x50988aa6
Exception code: 0xe0434352
Fault offset: 0x000000000003811c
Faulting process id: 0xb28
Faulting application start time: 0x01ce088d19221739
Faulting application path: C:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.Sdk.ServiceHost.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 5a80a27e-7480-11e2-93fc-00155d01651b
Faulting package full name:
Faulting package-relative application ID
.NET Runtime Error Event ID: 1026
Application: Microsoft.Mom.Sdk.ServiceHost.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: Microsoft.EnterpriseManagement.ConfigurationReaderException
Stack:
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.Initialize(Microsoft.EnterpriseManagement.InProcEnterpriseManagementConnectionSettings)
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.InitializeRunner(System.Object)
   at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
   at System.Threading.ThreadHelper.ThreadStart(System.Object)
I tried to reinstall the console and some of other mentioned things from the other posts but I think that there is a SQL issue here that I am not seeing. Can someone please help.
Thanks
Robert Lavigne Network Operations Manager - Kilobytes Data Solutions.

Hi
The issue got resolved after refresh the SCOM Data base access service account in SQL 2012.
Unable to launch the operations manager 2012 R2 console after extended the C drive of the SQl server ,getting error "The Data
Access service is either not
running or not yet initialized.
Got to your SQL server -->databases-operationsmanager--security-users--locate the daa service account and refresh.issue fixed and am able to luanch.

P6 Web Access connection to MS SQL Server database using TCP Dynamic Ports

Hi,
I am attempting to install P6 Web Access. When I run the installation and do the database configuration I am required to input a port number into the Database Host Port field. I do this and no error is displayed graphically, but I get a connection refused error when I look in the web access log.
"com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host has failed. java.net.ConnectException: Connection refused: connect "
The dba is running the database on an sql server farm and does not want to apply a static tcp port to the Primavera database as this will interfere with his other databases.
The fact that it appears to be mandatory to input a host database port during database configuration, has me thinking that P6 Web Access requires that the database be set up with a static TCP port? Is this correct?
I searched the documentation about this but came away with nothing...
any help would be truly appreciated.
Andy

At my previous company we experienced a similar issue with P6 Web. Our P6 database was hosted on an Oracle RAC and when configuring the Web connection I was forced to point it to a single RAC server rather then allow it to utilize the cluster. If you have found a resolution to this I would be interested in hearing about it.

The Data Access Service is either not running or not initialized.

When I try to access the OPSMGR 2012 R2 console I get the error:
Failed to connect to server "SCOM01.THG.local"
The Data Access Service is either not running or not initialized.
Date: 3/4/2014 8:41:07 AM
Application: Operations Manager
Application Version: 7.1.10226.0
Severity: Error
Message: Failed to connect to server 'SCOM01.THG.local'
Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. ---> System.ServiceModel.EndpointNotFoundException: Could not connect to
net.tcp://scom01.thg.local:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0045038. TCP error code 10061: No connection could be made because the target machine actively refused it 10.192.1.27:5724. ---> System.Net.Sockets.SocketException:
No connection could be made because the target machine actively refused it 10.192.1.27:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.ManagementGroupSessionManager.Connect(String server)
   at Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindowBase.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://scom01.thg.local:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0045038. TCP error code 10061: No connection could be made because the target machine
actively refused it 10.192.1.27:5724. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 10.192.1.27:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it 10.192.1.27:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
System Logs:
The System Center Data Access Service service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
The System Center Data Access Service service terminated unexpectedly. It has done this 5 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
The System Center Data Access Service service entered the running state.
Application Logs
Fault bucket , type 0
Event Name: CLR20r3
Response: Not available
Cab Id: 0
Problem signature:
P1: microsoft.mom.sdk.servicehost
P2: 7.5.3070.0
P3: 520d7e93
P4: System.Data
P5: 4.0.30319.18408
P6: 52310bef
P7: 2622
P8: 297
P9: 2V4KQ41FR0ZKJA4HMDJUZUWAZMPSCBGF
P10:
Attached files:
C:\Users\svc_scomdas\AppData\Local\Temp\WERB021.tmp.appcompat.txt
C:\Users\svc_scomdas\AppData\Local\Temp\WERB0DD.tmp.WERInternalMetadata.xml
C:\Users\svc_scomdas\AppData\Local\Temp\WERB0DE.tmp.hdmp
C:\Users\svc_scomdas\AppData\Local\Temp\WERC65B.tmp.dmp
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_microsoft.mom.sd_bd8814a66c4798fbd871834494e962595894932_cab_0837c781
Analysis symbol:
Rechecking for solution: 0
Report Id: 55e1dff8-a3a4-11e3-9412-00155d01fa02
Report Status: 0
Hashed bucket:
Fault bucket , type 0
Event Name: CLR20r3
Response: Not available
Cab Id: 0
Problem signature:
P1: microsoft.mom.sdk.servicehost
P2: 7.5.3070.0
P3: 520d7e93
P4: System.Data
P5: 4.0.30319.18408
P6: 52310bef
P7: 2622
P8: 297
P9: 2V4KQ41FR0ZKJA4HMDJUZUWAZMPSCBGF
P10:
Attached files:
C:\Users\svc_scomdas\AppData\Local\Temp\WERB021.tmp.appcompat.txt
C:\Users\svc_scomdas\AppData\Local\Temp\WERB0DD.tmp.WERInternalMetadata.xml
C:\Users\svc_scomdas\AppData\Local\Temp\WERB0DE.tmp.hdmp
C:\Users\svc_scomdas\AppData\Local\Temp\WERC65B.tmp.dmp
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_microsoft.mom.sd_bd8814a66c4798fbd871834494e962595894932_cab_0837c781
Analysis symbol:
Rechecking for solution: 0
Report Id: 55e1dff8-a3a4-11e3-9412-00155d01fa02
Report Status: 4
Hashed bucket:
Fault bucket , type 0
Event Name: CLR20r3
Response: Not available
Cab Id: 0
Application: Microsoft.Mom.Sdk.ServiceHost.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: Microsoft.EnterpriseManagement.ConfigurationReaderException
Stack:
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.Initialize(Microsoft.EnterpriseManagement.InProcEnterpriseManagementConnectionSettings)
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.InitializeRunner(System.Object)
   at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
   at System.Threading.ThreadHelper.ThreadStart(System.Object)

can you please check the following -
1) SQL services are running.
2) Data access service is running. you can try restarting the service too.
3) check that the OpsMgr database is not full.
4) start the 'SQL Vss writer" service.
5) check the sql server error logs.
6) Check your SQL accounts too.
7) Try this too -
To create this registry entry, follow these steps:
Click Start, click Run, type regedit, and then click
OK.
Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
Right-click Control, point to New, and then click
DWORD Value.
In the New Value #1 box, type ServicesPipeTimeout, and then press ENTER.
Right-click ServicesPipeTimeout, and then click Modify.
Click Decimal, type the number of milliseconds that you want to wait until the service times out, and then click
OK.
For example, to wait 60 seconds before the service times out, type 60000.
Quit Registry Editor, and then restart the computer.
Thanks, S K Agrawal

The Data Access service is either not running or not yet initialized. Check the event log for more information

Hi,
I have SCSM with remote SQL and the SCSM Management server give below error
Message: Failed to connect to server ‘Name of Server’
Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. —> System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://ServerName:5724/DispatcherService.
The connection attempt lasted for a time span of 00:00:04.0070932. TCP error code 10061: No connection could be made because the target machine actively refused it IPAddress:5724. —> System.Net.Sockets.SocketException: No connection could be made
because the target machine actively refused it IPAddress:5724
I had try to restart SQL & MS with same error,
Also i had try the following
https://social.technet.microsoft.com/Forums/systemcenter/en-US/c670d54d-3a92-481f-8dc9-55c475ad196f/problems-with-data-access-service-after-rebooting
https://social.technet.microsoft.com/Forums/systemcenter/en-US/26dc1d5c-fa82-403f-8949-3073f3b82a60/the-data-access-service-is-either-not-running-or-not-yet-initialized
Not help meRegards

I had same error before
below steps to solve it
Make sure SQL Server Running & ServiceManager Database not full
Stop All SCSM Services,
System Center Management Configuration
Microsoft System Center Data Access Service.
Microsoft Monitoring Agent
Rename Health Service State to Health Service State_old --- @ "C:\Program Files\Microsoft System Center 2012 R2\Service Manager"
Start SCSM Services
Microsoft Monitoring Agent
System Center Management Configuration
Microsoft System Center Data Access Service.
Wait 2 min...
check Event Viewer...
hope this help you.
Regards, Ibrahim Hamdy

Reinstall Access Connections Problem: X61s Vista32

I cannot get Access Connections (V5.02 and below) to function when reinstalled. Disk churns, takes forever to load and hangs if start is attempted. Checked required drivers all are ok.
Removed again but now wireless is off and refuses to come back on.
HELP!

I just finished a lengthy fight with this very issue on my X61 Tablet. I had tried all sorts of things to get it working. After looking through the Access Connections documentation I decided to wipe out and reinstall everything it listed as being a prereq. That seemed to do the trick. It may not all be necessary but it worked for me. Here is what I had to do to get it working again.
download the latest drivers for your wireless card, ethernet card, system interface driver, and power system. Also download a copy of access connections and power manager to be on the safe side.
Run the EXEs to extract the drivers to the c:\drivers directory but do not run any of the associated setups
Reboot into safe mode
From Programs and Features uninstall the Power Manager, Power Management Driver, Access Connections (blow away your profiles as well), and the Lenovo System Interface driver as well as any Intel network drivers in that list.
From the device manager uninstall the network card and the wireless card. my laptop listed a lot of goofy looking NICs in the device manger under safe mode, I uninstalled all of them as well. the Thinkpad PM device under System Devices also showed as having an error in the device manger for me so I uninstalled it as well.
Reboot
Open the device manger, update the drivers on the NIC and wireless card by pointing to the drivers you downloaded. Verify that all other devices are installed and working properly.
I then ran system update and let it install Access Connections, Power Manager, and the System Interface Driver. I'm sure you could manually install them from the packages downloaded in step one if you preferred. Just make sure Access Connections is installed last.
It will prompt you to reboot. After the reboot you should be all set.
One other side note, the Intel Proset install doesn't seem to play nicely with AC. During one of the trials I did while trying to fix this I installed the full proset and that really started hanging things up. Just my experience though. YMMV.

Access Connection​s refuses to run - X200 XP

Similar Messages

Maybe you are looking for

Access Connections refuses to run - X200 XP