"Access Control - Do Not Inherit" Grayed out when setting up a backup on Server 2008 R2 when trying to use remote NAS

I see one response here:
http://social.technet.microsoft.com/Forums/en-US/c99eead0-e2fc-4c83-8cb2-959d03512667/server-2008-r2-dc-backup-greys-out-do-not-inherit-option-for-file-share-backup
But it makes no sense to me. Running that command doesn't do anything.
How do I make the box stop graying out when setting up a backup with the GUI interface? This should be really simple I would think and for some reason the backup utility is graying out the "Do Not Inherit" option so I can backup to the NAS
device that has access control enabled in order to backup to the NAS.
Thanks in advance!

Hi,
From this article, it mentioned that it is by design that we cannot choose "do not inherit" in backup schedule when backup target is a remote shared folder.
Checklist: Schedule Automatic Backups
http://technet.microsoft.com/en-us/library/cc732540.aspx
If you use a remote shared folder, make sure that the folder is available, that you have write access to the folder, and that you are a member of the Administrators group or Backup Operators group on the computer hosting the folder. Each time you create
a backup, it will overwrite the older backups so that you will only have one backup at a time.
The backup will inherit the access control list (ACL) permissions of the folder.
For the account it required, as mentioned above, it should be "a member of Admin group or Backup Operators group, and it should have write permission on target folder".
Also map a network folder as a drive will not help show the mapped drive letter in backup destination. It is still a remote shared folder.
TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]

Similar Messages

I am showing 9 tabs open and I cannot access other websites (they are grayed out when I clock on them). How do I close tabs?

I was working on calendar and opened too many tabs. I am showing 9 tabs open and it affects other sebsites I am now trying to access. The webpage is grayed out and non-accessible. I do not need all the tabs. How do I close them?

Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I can not install the newest version of iTunes because of a file that can not be found. This is what I am seeing:(The feature you are trying to use is on a network resource that is unavailable. C:\......\Application Data\Apple\Apple Software Update\

I can not install the newest version of iTunes because of a file that can not be found. This is what I am seeing:(The feature you are trying to use is on a network resource that is unavailable. C:\Documents and Settings\Aubrie\Local Settings\Application Data\Apple\Apple Software Update\)

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
http://majorgeeks.com/download.php?det=4459
Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Adobe Reader XI (11.0.08) doesn't create thumbnail (bitmap) using Microsoft Interface IExtractImage -- Extract on Windows Server 2008 R2, when exe to generate thumbnail is launched from Windows service.

Adobe Reader XI (11.0.08) doesn't create thumbnail (bitmap) using Microsoft Interface IExtractImage --> Extract on Windows Server 2008 R2, when exe to generate thumbnail is launched from Windows service.
But if exe is launched as standalone, then interface IExtractImage --> Extract, gives Bitmap to generate thumbnail of PDF document.
Above problem occurs only for PDF documents, if we tried same with other software like CAD -CATIA it works without any problem.
Is there any security concerns form PDF side, which doesn't allow to generate Bitmaps, if exe to generate it is launched form Windows service.

It might be deliberate, Acrobat and Reader software is not intended to run in a service environment.

Get error code 0x80070643 when I try to install Sql Server 2008 R2 Service Pack 1 (KB2528583)

I keep getting error code 0x80070643 when I try to install Sql Server 2008 R2 Service Pack 1 (KB2528583)
Operating System is Windows 2008 R2 64 bit

Hi JamesRead,
According to your description, when you install SQL Server 2008 R2 service pack 1, we need to verify if
you must have administrative rights on the computer.
There are multiple files available for the download, you will be prompted to select the files you need. We need to verify if you run the SQLServer2008R2SP1-KB2528583-x64-ENU.exe. Or you can install SQL server updates from the command
prompt and check if it can install successfully.
You can prepare an installation of database engine instance to include product update:
setup.exe /q /IAcceptSQLServerLicenseTerms /ACTION=PrepareImage /UpdateEnabled=True /UpdateEnabled=True /UpdateSource=<path where the update is downloaded> /INSTANCEID=<Instance ID> /FEATURES=SQLEngine
For more information, you can review the following article about installing Updates from the Command Prompt.
http://technet.microsoft.com/en-us/library/dd638066.aspx
Thanks,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

I recently bought a WD My Book Live to backup using Time Machine, now that I've upgraded to and my old NAS won't support Mountain Lion. The WD drive appears in the Finder, it doesn't appear as an option when setting up the backup disc in Time Machine.

I recently bought a WD My Book Live to backup using Time Machine, now that I've upgraded to and my old NAS won't support Mountain Lion. The WD drive appears in the Finder, but it doesn't appear as an option when setting up the backup disc in Time Machine. Any ideas please?

" now that I've upgraded to and my old NAS won't support Mountain Lion. "
Do you have a few words missing in the original question ?.
When i upgraded from LION to MOUNTAIN LION it made NO difference at all to my MyBook Live !!!
reading the original post again and again, do you in fact have two My Book Live units, an old one and a new one ?
tim

Airport Utility Timed Access Control does not allow/restrict access to wireless clients per the time set.

I have been trying to setup Timed Access Control in Airport Utility and it does not seem to be working correctly.
In Airport Utility from Edit Timed Access Control I Enter a name for my device (iPad/iPhone any device), enter my mac address, set time for Everyday and use default Between 9:00 AM and 5:00 PM, save and then update. When I go to my device iPad iPhone etc. I still have access even when it is after the time set, 5:00PM. If I set no access it will restrict access also I set a time between 2:00 PM and 5:00 PM and access was restricted. It doesnt seem to matter what the device is. I know that the MAC Adress is set correctly. It seems like an issue with the Utility, possibly time miss match or something. Not sure if I am missing something or if this Utility just has flaws. Please Help.

I changed the default to (no access) and set an entry for my test device (an iPad) to "Everyday Between 9am to 5pm. The iPad was still able to gain access to the network.
Something else to note, if I try to edit the time of an entry it gives me an error on my MBP "Invalid value", "The value for “Timed Access Control” is invalid." This happens even if I delete a digit (number or letter in the time field) and replace with the exact same. Not sure if the two are related. I have tried to edit access from my iPad. I don't get any errors but I still don't get the expected results. I called Apple to try and get Tech support but they were not much help. Thanks again.

Airport Express - airTunes setup not selectable - grayed out

Hi, in iTunes, I cannot select my 'air tunes' setup - it is grayed out. I created this a few years ago. I have all other normal internet connectivity through the airport express. It is connected via ethernet to a cable modem.
I cannot find any setting in iTunes to delete the airTunes setting and/or create a new one.

Welcome to the discussion area!
It sounds like you will need to perform a factory default reset on the AirPort Express.
Power down the Express
Hold in the reset button and while you continue to hold the reset button in, plug the Express back in to power
Keep holding the reset button until you see the amber light begin to blink more quickly and then release
Note that when you reset the Express, it broadcasts a network with a default wireless network name like Apple Network xxxxxx, so you will need to log on to that network so that AirPort Utility will be able to communicate with your device.
Then reconfigure the Express again by opening AirPort Utility and clicking Continue to follow the guided setup to reconfigure your Express. You can choose to enable or not enable AirTunes during this setup procedure.

I recently signed up for iTunes Match. It works well on my iPad2 but not my iPhone4S. A while ago my music did show up but it was grayed out. Now I don't see anything. I've tried everything I can think of. I'm running the latest operating system

I recently signed up for iTunes Match. It works well on my iPad2 but not my iPhone 4S. A while ago my music did show up on my phone but much of it was grayed out. Now I don't see anything on my iPhone. I've tried everything I can think of. I'm running the latest operating system and software

Try the tips in this thread: iTunes Match - 'No Music' on iPhone 4

Audio Capture not available / grayed out

I have a Samsung SC-D263 connected and when I try to capture video in FCE there is no audio. When looking in the settings, the check box for audio capture is grayed out... any ideas?
I managed to find drivers for the camera, but i don't know how to install them...

What audio checkbox are you talking about?
Do you see the video in the capture window? Do the meters move?
http://www.fcpbook.com/Audio3.html

"Rescan for Location" not available (grayed out)-

…on contextual menu. I know I had the GPS feature activated on the camera. Why is it grayed out?

One reason that iPhoto "freezes" with look up places set to automatically is not having an internet connection available
2000 photos is not many - I have over 30,000 and other have more
LN

Sanitze document option not available - grayed out.

This is not a protected document (that I can tell). Any reason the Sanitize document option would be grayed out within a document? Many thanks!

What's the version of Acrobat at your end? Can you please upload the sample file.

How to access Invert if it is grayed out?

I can't select Invert - it is grayed out. I'm on page 112 (Lesson 4 Layer Basics) of the Classroom in a Book. Am following instructions step by step and working with Layer Styles but how to enable Invert?

You need an image layer, or layer mask selected in order to use Invert. The image layer should not be locked, unless it is the background layer. i.e. you can invert the Background layer despite it being locked, but you can't invert other image layers if they are locked.
The layer lock icon is at the top of the layers panel, and looks like a little padlock

Smart Guides not working (grayed out).

I too am having problems with the 'Smart Guides' option being grayed out in the 'View' - 'Grids and Guides' column. I've replaced the preferences, checked all the appropriate boxes, yet nothing I do works. Additionally, the 'Smart Guides' did work for some time. However, for reason(s) I'm unaware of, they just stopped showing up. I'm stumped. Any suggestions?

I've branched your question out of the Replace Your Prefs thread into one of its own and changed the title so more people will see it. I'm not able to make the menu item go gray here, and I'm going to presume that you followed the instructions in the other thread for trashing the prefs, so I'm not going to suggest you do that again, at least not yet.
It would help if we know your OS and version of ID (including the update patch applied).

Time access control does not work

I set up the time access control for my kids devices, but they can still access the internet.

Several possibilities exist:
1) The Timed Access entries are not being set up correctly. Have you tested each device yourself?
2) The kids are smart enough to know how to work around the settings
3) The kids know how to get on another nearby wireless network.
Regarding 2) and 3), there are numerous popular sites on the Internet that kids visit that provide them with tips and techniques to get around security on popular routers, so that possibility may be more real than you might imagine.
Regarding 1), we may be able to help, as there are two basic ways to set up Timed Access.....one being quite a bit more secure than the other. Unfortunately, this means a more time consuming and tedious set up.

"Access Control - Do Not Inherit" Grayed out when setting up a backup on Server 2008 R2 when trying to use remote NAS

Similar Messages

Maybe you are looking for