Access Denied when Exporting, Creating new folder.

My normal workflow on some occasions is that I work on images then making a selection, I will export then to a folder on my desktop.  I normally hit the Export and on the pop up I click on create new folder and export the images to the folder.
Since the new update, when I try to create a folder it gives me Access Denied.  If I create the folder first, there is no problem.

Hi,
I would like to suggest you run the following commands with elevated privilege.
takeown /f {Folder Path}
cacls { Folder Path} /G administrators:F
Note: please replace {Folder Path} with the real folder path.
After that, please try to delete the folder again.
Does it work?
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

  • Folder Access Denied when trying to delete folder

    I am using Windows 2008 server.  I have a folder that I had setup as a share but now I want to delete it.  I am logged in with a domain account that is a member of the local Administrators group.  When I try to delete the folder I get a "Folder
    Access Denied" message followed by "You need permission to perform this action. You require permission from Administrators to make changes to this folder". 
    Then I am presented the options of Try Again or Cancel.  I select Try Again but again get the "Folder Access Denied" message.  How can a member of the local Administrators group be denied access to deleting a folder that is on that same server
    that I am logged into?

    Hi,
    I would like to suggest you run the following commands with elevated privilege.
    takeown /f {Folder Path}
    cacls { Folder Path} /G administrators:F
    Note: please replace {Folder Path} with the real folder path.
    After that, please try to delete the folder again.
    Does it work?
    Regards,
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Access Denied for creating new folder

    Hi friends,
    When i tried to create a new folder under shared folders in catalog as a weblogic user, i couldnt get a option for creating new folder. But i have that option enabled in the My folders area.
    Im not sure why the create folder option is not enabled for the weblogic user in the shared folders.
    Im on OBIEE 11.1.1.7 and for a workaround i referred the below link
    https://forums.oracle.com/thread/2520389
    But i followed the steps mentioned in the above link, but not succeeded still facing the same create folder privilege issue under the shared folders for the weblogic user.
    Kindly suggest me your approach for solving this issue.
    Thanks
    Regards,
    Saro

    Hari,
    Restart the services (weblogic and BI) you should see it I have observed same kind of behavior in 11.1.1.7.0 (Admin tab missing and No Permissions icon for weblogic user) dont know exact reason
    Restart is not a solution but will see if you are able to see or not
    Thanks,
    Saichand

  • When I want to organise my bookmarks most of the options are greyed out and cannot be used including create new folder! Help

    '''''''''bold text'''''''''
    When i want to organise my bookmarks most of the options on the organise bookmarks menu are greyed out and cannot be used - including create new folder etc. Help please.

    Make sure you are not in the Private Browsing Mode:
    File > Private Browsing is UNCHECKED.

  • Can't create new folder in home folder when saving files

    In gnome, when I want to save any file in my home folder, and I want to create a new folder in my own home. The new folder appeares for several minutes and then disappears.
    If I create new folder in other directory. There is no such problem.
    Also I can create new folder in my own home directory in nautilus or by mkdir.
    any one can help me.....
    Thanks very much....

    I think either way should work OK - it's less of a security risk to use a standard account for "everything", including web browsing, but I confess I don't myself do this. You would again have to authenticate with an admin username/password if you do download and install from the standard account.
    Whichever way you do it, this article may be relevant:
    *About file quarantine in Mac OS X v10.5 and v10.6*
    http://support.apple.com/kb/HT3662
    It includes the following:
    If you have multiple user accounts on your Mac, the user account that downloaded the file is the only user account that can remove the quarantine attribute to the file. All other user accounts can open the quarantine file, but they will be presented with the quarantine dialog box asking "Are you sure you want to open it?" every time they open the file.
    --------------------

  • HT2476 Why when clicking the right mouse button for my external hard drive there is no option for "create new folder"?

    Hi there. I'm having a problem with my external hard drive. Actually with only one of them (others seem to be ok...). The problem is that when clicking the right mouse button (or using other ways to do the same), in the drop-down list there isn't an option for "create new folder". Please, can anyone help with this issue?

    The drive is NTFS formated. Most probably that's the reason, but there is some info on the drive which I wouldn't like to loose. If there is a way to re-format the drive and save the files, that would be great. If there isn't such a way, then please, tell me how to re-format it. But bear in mind as well that I'm using Parellels and the drive is to be used in Mac and Win modes, both. Just to add some more info: my other drive is FAT32 formated and all seems to go well with it.

  • Cannot create new folder?

    I have just moved to a new hosting and have connected to it
    and I can edit files. When I try to add a folder to the remove I'll
    get
    "An FTP error occured - cannot create new folder .
    Access denied. The file may not exist or there could be a
    permission problem".
    Any idea?

    Hi,
    Did you make any changes before the issue appears?
    Before going further, you may try the
    system restore to go back to a previous status and check the result.
    Tracy Cai
    TechNet Community Support

  • Can't create new folder on an external hard drive, and how to transfer files?

    Hello everyone,
    the non-English speaking videographer I translate for is having problems operating his Premiere CS5 for Mac from an external hard drive. He cannot create new folder on the external hard drive (the "New Folder" button is grayed-out when tries to export media onto the external hard drive) and when he simply tries to create new folder, the "new folder" option isn't available.
    He suspects it's because the hard drive was formatted for PC.
    Questions:
    - should PC-formatting cause that problem?
    - what's the proper way to transfer media files from PC-formatted external hard drive to the internal hard drive on Mac?
    Would appreciate your advice.
    Dimitri Vorontzov

    He is right on the money
    Now, for the sad or FAT part. You need to format the drive as FAT32 to make it work both on PC and MAC but, and that is a big BUT, the max file size of any given file will be 4GB. I haven't treid other formats yet, like the journaled MAC OS extended, but I don't think that would work. We transfer our files through or own gigabit network so I never had to try it, other than FAT32 formatted SDHC cards.

  • Photoshop cs4 access denied when trying to install from disc in Windows 7 64bit.

    Photoshop cs4 access denied when trying to install from disc in Windows 7 64bit. I tried it in
    safe mode and it starts to install but get an error there as well.
    What do I do?

    So when you put the disk in it won't run correctly? When the disk is inserted you should have a window pop up with 2 options. 1 to install and the other to see what is on the disk. Choose to explore or open the disk. Go to the CS4 folder where the photoshop .exe file is (that will run the setup), right click on the .exe file and choose run as Admin and it should start. See if it will install. If not then read below.
    I am not sure how far you got in the install before so chances are you will have to run the CS4 cleanup utility. 2 levels to run at but don't use 1 or 2 just type in the number 3.
    http://www.adobe.com/support/contact/cs4clean.html
    You may need to run the windows installer cleanup utility too
    http://support.microsoft.com/kb/290301
    Before you try to reinstall the software ensure that adobe reader is not installed. If it is remove it. It has caused issues in the past with vista and CS4 installs.
    Also turn off windows Defender and any anti-virus software. You can keep UAC on in Windows 7.
    During the CS4 install at 90 percent it will almost stop and may take 5 to 10 mins to finish. This is normal. What a pain huh......
    After install is finished, reboot
    After reboot, go to the CS4 64 bit or 32 bit icon (depends on 32 or 64 bit Windows 7) in start area, right click on CS4 64 bit (if you have windows 7 64 bit) and choose properties, compatibility tab and then check run as Admin at the bottom area. Hit apply, ok to close out.
    Now start CS4 and run the updater.

  • Create new folder with selected items

    I have a bunch of movies that I would like to place into individual folders of the same name (Without the extension name). I wanted to try and create a keyboard command to do this with the selected files, but can't manage to figure out how!
    What I did was try to create a new service command in automator, then went to keyboard shortcuts in system preferences to assign a keyboard command to it.
    I want to make something that works like control-command-n (to create new folder from selected items), only I want the items to be in individual folders of the same name.
    eg.
    Files selected such as:
    The incredibles.avi
    Cinderella.mkv
    Dogma.mp4
    each moved into individual folders labeled as:
    The Incredibles
    Cinderella
    Dogma
    Also, is there a way to change the control-command-n shortcut so it can create a new folder from a single item? It only works when there is more than one file selected.
    Thanks so much for any help!

    I am going to guess that you start off with a single file - what are you doing to generate these files? My *Get Names of Finder Items* action can get a name to use in the *New Folder* action - items passed to the New Folder action will get copied to it, so a little more detail may help in creating the workflow.
    The *Dispense Items Incrementally* action can also be used to dole out the items one at a time - knowing what the workflow is doing would help with the use of this action as well.

  • How Create New Folder in KM with Name having Special Character

    Hi,
    How to create new Folder in KM with name having special character in it.
    Right now its not allowing me to create folder when i have Colon( as one of the character in name of the folder.
    Is there a way to change this validate?
    Any help is appriciated.
    Thanks

    Hi DK,
    I'm not sure about special chars such as ":" but ifyou need to have your folders displaying special language chars (like german chars), have a look into the below link.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30deb229-d570-2910-4aaf-8858e0660f05
    Hope that helps.
    Ray

  • The spanning-tree add strange value when I create new Vlans

    Hi,
    On all switchs access, the spanning-tree add strange value when I create new Vlans from Distrib Layer,
    and no association is created with any interface with spanning-tree vlan 700, see below in this exemple,
    until I reboot the switch.
    somebody already saw this values ?
    DSFDS112#sh span sum
    Switch is in rapid-pvst mode
    Root bridge for: none
    EtherChannel misconfig guard is enabled
    Extended system ID           is enabled
    Portfast Default             is disabled
    PortFast BPDU Guard Default  is disabled
    Portfast BPDU Filter Default is disabled
    Loopguard Default            is enabled
    UplinkFast                   is disabled
    Stack port is StackPort1
    BackboneFast                 is disabled
    Configured Pathcost method used is long
    Name                   Blocking Listening Learning Forwarding STP Active
    VLAN0001                     0         0        0          3          3
    VLAN0002                     0         0        0         22         22
    VLAN0006                     0         0        0          3          3
    VLAN0007                     0         0        0          8          8
    VLAN0009                     0         0        0          4          4
    VLAN0010                     0         0        0          3          3
    VLAN0011                     0         0        0          3          3
    VLAN0012                     0         0        0          3          3
    VLAN0013                     0         0        0          3          3
    VLAN0090                     0         0        0         15         15
    VLAN0109                     0         0        0          3          3
    VLAN0200                     0         0        0          4          4
    VLAN0300                     0         0        0         26         26
    VLAN0302                     0         0        0          4          4
    VLAN0700               -   253  -1872756560  2087191206  -1872756549  2080375982
    VLAN0702               -   253  -1872756560  2087191206  -1872756549  2080375982
    VLAN0704                     0         0        0          4          4
    VLAN0710               -   253  -1872756560  2087191206  -1872756549  2080375982
    VLAN0816                     0         0        0          3          3
    VLAN0820                     0         0        0          3          3
    20 vlans               -   759  -1323302384  1966606322  -1323302237  1946160764
    DSFDS112#sh span vlan 700
    VLAN0700
      Spanning tree enabled protocol rstp
      Root ID    Priority    4796
                 Address     0008.e3ff.fcbc
                 Cost        10000
                 Port        608 (Port-channel1)
                 Hello Time   2 sec  Max Age 20 sec  Forward Delay 15 sec
      Bridge ID  Priority    62140  (priority 61440 sys-id-ext 700)
                 Address     885a.9213.6880
                 Hello Time   2 sec  Max Age 20 sec  Forward Delay 15 sec
                 Aging Time  300 sec
    Interface           Role Sts Cost      Prio.Nbr Type
    Po1                Root FWD 10000     128.608  P2p
    DSFDS112#sh run int Gi1/0/25
    Building configuration...
    Current configuration : 194 bytes
    interface GigabitEthernet1/0/25
     description Station12
     switchport access vlan 700
     switchport mode access
    end
    DSFDS112#sh span interface Gi1/0/25
    no spanning tree info available for GigabitEthernet1/0/25
    DSFDS112#sh int status interface Gi1/0/25
    Port      Name               Status       Vlan       Duplex  Speed Type
    Gi1/0/25  Station12          connected    700          full    100 10/100/1000BaseTX
    Thanks for your help,
    Regards.

    Venki,
    The ORA-00942 is okay because there is no existing object. But what stuck me is the ORA-01921 error which may indicate that this might not be a new database.
    CREATE ROLE exp_full_database
    ERROR at line 1:
    ORA-01921: role name 'EXP_FULL_DATABASE' conflicts with another user or role name
    CREATE ROLE imp_full_database
    ERROR at line 1:
    ORA-01921: role name 'IMP_FULL_DATABASE' conflicts with another user or role name
    Are there any existing databases on this server? Have you tried to create it on other machine?I searched on Metalink too and found Doc ID: 237486.1 ORA-29807 Signalled While Creating Database using DBCA which say that eroror could be ignored. You may want to review that as well.
    Ittichai

  • Can't create new folder to Applications in standard account

    Hi.
    As I have two accounts one admin account and other standard account and last time it didn’t work in both.
    So I just restored factory settings like described here: http://support.apple.com/kb/ht3910
    This fixed the problem.
    Now again I can't create new folder to applications but this time it doesn’t work only in my standard account but it does work in admin account.
    Previously I downloaded this program to open pdb files :http://www.loghound.com/pordible/
    But it didn't work for me so I removed it to Trash. That's when I noticed that the new folder icon in applications isn't active but I can't be sure that this caused it.
    I used Disc Utility to repair my macbook pro hard disk using Mac OS X Install DVD but it didn't fix the problem.
    Is there any way to fix this problem without restoring factory settings again?

    I think either way should work OK - it's less of a security risk to use a standard account for "everything", including web browsing, but I confess I don't myself do this. You would again have to authenticate with an admin username/password if you do download and install from the standard account.
    Whichever way you do it, this article may be relevant:
    *About file quarantine in Mac OS X v10.5 and v10.6*
    http://support.apple.com/kb/HT3662
    It includes the following:
    If you have multiple user accounts on your Mac, the user account that downloaded the file is the only user account that can remove the quarantine attribute to the file. All other user accounts can open the quarantine file, but they will be presented with the quarantine dialog box asking "Are you sure you want to open it?" every time they open the file.
    --------------------

  • Can not create new folder just briefcase

    canno

    Did you mena taht the Folder option is missing when you right click>New, if so, please refer to this link:
    http://social.technet.microsoft.com/Forums/windows/en-US/9ee6ecdf-5958-4af4-b640-c659ada57bc4/option-to-create-new-folder-on-desktop-is-missing
    (Answer provided by Linda, edit the registry key, you may back up registry first because incorrect setting in registry can cause serious issue.)
    If what you're referring to is not this, please describe this issue more detailed.
    Regards
    Yolanda
    TechNet Community Support

  • ORA-31050: Access denied when try to register XMLSchema

    Dear All
    I got ORA-31050: Access denied
    when tried to run to load XML schema with DBMS_XMLSCHEMA.registerSchema
    Can you advise me what privilege should I grant to the user?
    I tried grant XDBADMIN role but it does nto help
    Thank you in advance
    Artem Rodin

    Dear Mark!
    I realy need you help!
    I can successfully register schema which has complexType declaration as root element, like
    <schema targetNamespace="http://www.oracle.com/PO.xsd"
         xmlns:po="http://www.oracle.com/PO.xsd"
         xmlns="http://www.w3.org/2001/XMLSchema">
    <complexType name="PurchaseOrderType">
         <sequence>
              <element name="PONum" type="decimal"/>
              <element name="Company">
                   <simpleType>
                        <restriction base="string">
                             <maxLength value="100"/>
                        </restriction>
                   </simpleType>
              </element>
              <element name="Item" maxOccurs="1000">
                   <complexType>
                        <sequence>
                             <element name="Part">
                                  <simpleType>
                                       <restriction base="string">
                                            <maxLength value="1000"/>
                                       </restriction>
                                  </simpleType>
                             </element>
                             <element name="Price" type="float"/>
                        </sequence>
                   </complexType>
              </element>
         </sequence>
    </complexType>
    <!--element name="PurchaseOrder" type="po:PurchaseOrderType"/-->
    </schema>
    But I failed if in the root there is element like
    <schema targetNamespace="http://www.oracle.com/PO.xsd"
         xmlns:po="http://www.oracle.com/PO.xsd"
         xmlns="http://www.w3.org/2001/XMLSchema">
    <complexType name="PurchaseOrderType">
         <sequence>
              <element name="PONum" type="decimal"/>
              <element name="Company">
                   <simpleType>
                        <restriction base="string">
                             <maxLength value="100"/>
                        </restriction>
                   </simpleType>
              </element>
              <element name="Item" maxOccurs="1000">
                   <complexType>
                        <sequence>
                             <element name="Part">
                                  <simpleType>
                                       <restriction base="string">
                                            <maxLength value="1000"/>
                                       </restriction>
                                  </simpleType>
                             </element>
                             <element name="Price" type="float"/>
                        </sequence>
                   </complexType>
              </element>
         </sequence>
    </complexType>
    <element name="PurchaseOrder" type="po:PurchaseOrderType"/>
    </schema>
    I got the following error stack
    ORA-01031: insufficient privileges
    ORA-06512: at “XDB.DBMS_XDBZ0”, line 218
    ORA-06512: at “XDB.DBMS_XDBZ”, line 6
    ORA-06512: at line 1
    ORA-06512: at “XDB.DBMS_XMLSCHEMA_INT”, line 0
    ORA-06512: at “XDB.DBMS_XMLSCHEMA”, line 26
    ORA-06512: at “XDB.DBMS_XMLSCHEMA”, line 131
    ORA-06512: at “DVLP.PRIME_BRIDGE”, line 73
    ORA-06512: at line 7
    I guess you can reproduce this in-house,
    It's not my schema it is taken from
    XML Database Developer’s Guide - Oracle XML DB
    Structured Mapping of XMLType 5-3
    Example 5–1 XML Schema Definition, po.xsd
    As far as I understand in the second case Oracle tries to create a table to store XML content and fails to do it.
    User that I used has DBA role. What other privileges should I grant to the user? And/or I should grant some additional privileges to "XDB" user?
    This issue has become critical for me, so I am highly appreciate any assistance
    Many thanks in advance
    Best regards
    Artem Rodin

Maybe you are looking for

  • Order by clause...

    Hi everyone, How can i achieve this with order by clause If i have the following data in my table. I need one record (which has the data 'Last record') to be the last record for my select statement, and order the other records according to "no" whate

  • How to Encrypt external drives with FileVault 2?

    I can't find an option in FileVault where one can encrypt an external hard disk. Has anyone tried this? On another side note, I've also tried encrypting my Time Machine backup, but the option to do so is greyed out in the Time Machine preferences.

  • IPod not functioning

    My iPod Mini has a lock on the left side of the clock and an arrow, on the left side of the lock pointing toward the lock . The last song played remains on the display. The display remains dark and does light up when attached to my computer or plugge

  • Text in total

    hi ,                  i have an requirenment, i have to display text before total in alv(like payable by you 2890.00) . am using reuse_alv_grid_display. without appending text in internal table.

  • Phone Audio on Jabra SP700 Hands Free

    I have a Palm Centro and a JabraSP700. I am able to setup the Palm Centro to communicate with the Jabra. But, I am unable to get the phone audio to play on the Jabra. When I make a phone call, the Jabra says that it is connected. When I quit the phon