Access denied when trying to install itunes on windows 7

when trying to install itunes I get a message access denied. using win 7 i have read that a certain windows update can cause this. can anyone provide any information on how to fix this? I've tried to remove this, but in control panel-update history, it say it was installed 08/22. when i look at the list to uninstall it, i don't see it.
KB2918614

Go to Control Panel > Programs and Features > View installed updates then search the list for Security Update for Microsoft Windows (KB2918614). You may need to adjust the column widths to read the full titles. Uninstall it if you have it, then reboot and try installing iTunes again.
If you have further issues see Troubleshooting issues with iTunes for Windows updates.
tt2

Similar Messages

Photoshop cs4 access denied when trying to install from disc in Windows 7 64bit.

Photoshop cs4 access denied when trying to install from disc in Windows 7 64bit. I tried it in
safe mode and it starts to install but get an error there as well.
What do I do?

So when you put the disk in it won't run correctly? When the disk is inserted you should have a window pop up with 2 options. 1 to install and the other to see what is on the disk. Choose to explore or open the disk. Go to the CS4 folder where the photoshop .exe file is (that will run the setup), right click on the .exe file and choose run as Admin and it should start. See if it will install. If not then read below.
I am not sure how far you got in the install before so chances are you will have to run the CS4 cleanup utility. 2 levels to run at but don't use 1 or 2 just type in the number 3.
http://www.adobe.com/support/contact/cs4clean.html
You may need to run the windows installer cleanup utility too
http://support.microsoft.com/kb/290301
Before you try to reinstall the software ensure that adobe reader is not installed. If it is remove it. It has caused issues in the past with vista and CS4 installs.
Also turn off windows Defender and any anti-virus software. You can keep UAC on in Windows 7.
During the CS4 install at 90 percent it will almost stop and may take 5 to 10 mins to finish. This is normal. What a pain huh......
After install is finished, reboot
After reboot, go to the CS4 64 bit or 32 bit icon (depends on 32 or 64 bit Windows 7) in start area, right click on CS4 64 bit (if you have windows 7 64 bit) and choose properties, compatibility tab and then check run as Admin at the bottom area. Hit apply, ok to close out.
Now start CS4 and run the updater.

TS3212 I get a side-by-side error when trying to install iTunes to Windows 7 64-bit???

When trying to install iTunes to Windows 7 64-bit, I get a side-by-side error. Has anyone else seen this problem and were you able to resolve installing iTunes? If so, how did you resolve it?

Hi
Hope you are fine there!
recommend that you attempt to resolve this issue by uninstalling iTunes and QuickTime, and then reinstalling the latest version of each. To do this, first ensure that you are logged in to an Administrator user account on your computer, then follow the instructions in the appropriate article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7:
http://support.apple.com/kb/HT1923
Removing and reinstalling iTunes, QuickTime, and other software components for Windows XP:
http://support.apple.com/kb/HT1925
Take care!

Error when trying to install iTunes with Windows 7

I am using windows 7 on my laptop and when trying to install iTunes i recieve the following error message
Apple Application Support was not found.
Apple Application Support is required to run iTunesHelper.Please uninstall iTunes, then install iTunes again.
Error 2
After uninstalling and re-installing iTunes, the error still occured.
Anyone any ideas how to solve this?

After searching through this forrow i found this
http://support.microsoft.com/kb/946414
After running the Fix-It, i had no problem installing iTunes

TS3212 Insufficient privileges error when trying to install itunes in Windows 7

I'm trying to install itunes on a machine with windows 7 and keep getting the error that installer has insufficient privileges to access this directory c:\programdata\microsoft\windows\startmenue\programs\itunes. I am logged in as an administrator. Does anyone know how to fix this. Thanks,

After searching through this forrow i found this
http://support.microsoft.com/kb/946414
After running the Fix-It, i had no problem installing iTunes

Error when trying to install itunes on Windows 7

I am trying to install ITunes on A Windows 7 and get the following error microsoft.vc80.crt,version="8.0.50727.4053",type="win32",publickeytoken="1fc8b3 b9a1e18e3b",processorarchitecture=amd64"

although the following document refers to XP rather than Vista, it's still worth a crack on a Vista box:
iTunes and QuickTime for Windows cannot be installed without Visual Basic Script (VBScript)

Access Denied When Trying To Install Printer - Windows 7

Good Day
I have a serious problem on a client's computer. All I need to do is connect the laptop to a network printer, but I am having a lot of difficulty in doing so.
First the details of the laptop: Windows 7 Professional 64-bit connected to network using ETH cable. Avira Professional antivirus running, firewall disabled on pc, user is member of administrators group only.
Details of the printer: Xerox Workcentre 3220, connect to network using ETH cable, but also shared on pc also running Windows 7 64-bit Professional.
I am able to ping the printer and have connected all the other pcs on the network to the printer without any troubles whatsoever. Printing, scanning - everything is working fine for the other pcs. I am also able to connect to shares from the laptop to any
other pc.
So here is my issue with this specific laptop:
Firstly, when using the "Add Printer" wizard, the "Add a local printer" option is greyed out.
So I tried connecting to the printer using the"Add a network, wireless or Bluetooth printer" option, which seemed to be working, but during installation it gives an Access Denied error and undoes the installation.
Then I tried connecting to the share of the printer on one of the other pcs, which had the exact same result.
I then tried to modify an other printer, by firstly trying to add a new Local Port, but the I recieve the following error: "Specified port cannot be added. Access is denied."
I tried then adding the driver using the Windows Print Server, but the buttons were unavailable.
After reading on many forums, I accessed the Print Management console (Control Panel -> Administrative Tools -> Print Management)m and tried adding the printer and ports there, but recieved an "Access Denied" error every time.
Basically whatever I tried, I recieved "Access Denied" errors. I created a new user, which is only a member of the Administrators group. Logged in with new user, without any success in connecting to the printer. I then tried adding security permisssions
for "everyone" to the folder C:\Windows\System32\spool\PRINTERS, as I read on another forum. I tried modifying the group policy using gpedit.msc and also using the Local Security Policy, although I could have missed some things in these two places,
but basically with a quick glance, everything seemed fine. I am sure there are no virusses, etc on this laptop and as I have said all the other pcs connected to the printer very easily.
How can it be that I cant install a printer on this laptop, while I was able to do so a year or so back?
I have gotten a few suggestions that it will in the end just save me time by formatting the pc and reloading all the data and programs, but this isn't an option I really want to take. And then I have previously had issues with the "Add a local printer"
option greyed out and unable to add printers, etc, but then I was able to solve the problem by creating a new user and then switching to that user - which indicated a possible user profile corruption. But in this case even that did not work.

Hi,
please check your below configuration:
1.Start the policy editor (Control Panel -> Administrative tools -> Local security policy)
2.Select “Local policy” item
3.Find the item “Devices: Prevent Users from Installing Printer Drivers” in the section Security Settings -> Security Options and change it to Enabled
4.Go to “Security Settings -> User Rights Assignment” section and check, that “Load & Unalod Drivers” option contains the active user group. It important, that even if it has “All Staff” already, it still could miss “Administrators” group, so it’s necessary
to add it manually.
In addition, this thread could be referred:
http://social.technet.microsoft.com/Forums/en-US/8c3c3d97-9d85-4ab0-9fc8-4b7aba202fb2/windows-cannot-connect-to-the-printer-access-is-denied-please-help?forum=itprovistaprinting
Karen Hu
TechNet Community Support

Error Message access denied when trying to install on SD Card

Hi,
I got this errormessage whan I'm trying to install the image about CMD (run as Admin):
C:\FFUTEST>dism.exe /Apply-Image /ImageFile:flash.ffu /ApplyDrive:\\.\PhysicalDr
ive1 /SkipPlatformCheck
Access is denied.
Does anybody know a solution?

Are you able to see the SD card in file explorer? When you performed the diskpart command sequence:
diskpart
list disk
exit
Did your SD card show up as physicaldrive1?
Is the SD card either 8 or 16 GB in size and Class 10?
Also, are you running this command on a Windows 10 install?
You might check that explorer or cmd don't have a reference to the SD card still. If a program is accessing the card that might prevent DISM from accessing it in exclusive mode.
Jonathan Tanner | Microsoft | Windows 10 IoT Core Insider Preview Support | This posting is provided 'as is' with no warranties and confers no rights.

Why do I see a directory access message when trying to install iTunes?

iTunes won't install. I first got this error when trying to update to 9.2: "Error writing to file C:\Program Files\iTunes\iTunes.Resources\it.lproj\TVShowsIntro.nib\objects.xib. Verify that you have access to that directory." I then tried to uninstall and reinstall and I keep getting the same error during the 'copying files' part of the install process. Can someone please tell me how to fix this issue? Thanks.
gpshaffer

That's consistent with disk/file damage.
Let's try running a chkdsk over your C drive. There's instructions and a guided help in the following document.
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk r/ (depending on how you go about this):
[How to perform disk error checking in Windows XP|http://support.microsoft.com/kb/315265]
Does the chkdsk find/repair any damage? If so, try another install. Does it go through properly this time?
Message was edited by: b noir

When trying to install itunes on windows 7 i got a configuration data for this product is corrupt?

It is not allowing me to install, it gives me the error: configuration data for this product is corrupt. How do I install itunes on my windows 7?
Trying to update my ipad....but I first need to install itunes!!

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Error when trying to install iTunes on Windows laptop.

Everytime I try and install iTunes it come up with an error 'The feature you are trying to use is on a network resource that is unavaliable' It allows me to enter an alternative path but I am not sure what I should be using?

Many thanks.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Access Denied when trying to add DP to Windows Server 2003

Hello. My environment is SCCM 2012 SP1. I have a Windows Server 2003 SP2 machine that I need to set a distribution point up on. I have all the prep work complete like IIS installed, local administrator, etc. I have also already setup 300 DPs successfully
on the same platform but for some reason this one is causing me problems. I have made sure that the secondary server I am setting the DP up from is in the local administrators group. However, I keep getting access denied errors. I have checked and can access
the ADMIN$ share on the machine. Any ideas what I am missing.
Failed to install ISAPI on server.lab.local, failed to copy E:\ConfigMgr12\bin\x64\..\i386\smsfileisapi.dll to
\\server.local.lab\ADMIN$\system32\inetsrv\smsfileisapi.dll, Win32 error = 5

Hi,
Have you tried to access \\server.local.lab\ADMIN$\system32\inetsrv or copy E:\ConfigMgr12\bin\x64\..\i386\smsfileisapi.dll to
\\server.local.lab\ADMIN$\system32\inetsrv\smsfileisapi.dll using the secondary site computer account?
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I am getting errors 2503 and 2502 when trying to install itunes on windows 8

I ma getting errors 2503 and 2502 in Windows 8 how do I resolve?

Error 1935 | Assembly component Microsoft.VC80.CRT | Install | CS4, CS5, CS5.5 products | Windows

I am getting the message "The windows installer Service could not be accessed when trying to install Itunes on my new computer, any help would be appreciated.

I am getting the message "The windows installer Service could not be accessed when trying to install Itunes on my new computer, any help would be appreciated.

Hey there Frank0619,
If you have not been able to install iTunes because the Windows Installer service is not available, I would recommend the troubleshooting in the following troubleshooting to help.
Issues installing iTunes for Windows
These in particular:
Make sure you have an administrator account.
To install iTunes, you'll need to log in to your computer with an administrator password. If you're not sure if you have an administrator account, read Windows 7: How do I log on as an administrator? You could also refer to your computer's help system, contact your IT department, or visit support.microsoft.com for assistance.
Install the latest Microsoft Windows updates.
To download the latest updates, visit the Microsoft Windows Update website. iTunes for Windows requires Windows XP, Windows Vista, Windows 7, or Windows 8 with the latest Service Pack installed. If you can’t install the updates, refer to your computer's help system, contact your IT department, or visit support.microsoft.com for assistance.
Download the latest version of iTunes.
The latest version of iTunes can be downloaded at http://www.apple.com/itunes/download/.
Disable conflicting software.
Some Windows background processes can cause issues for other programs and processes. These conflicts can prevent applications, such as iTunes, from installing. Disable conflicting processes by starting your computer using MSConfig:
Using Msconfig to troubleshoot conflicts in Windows XP
Using Msconfig to troubleshoot conflicts in Windows Vista, Windows 7, and Windows 8
Some security software made by other companies can't be disabled using MSConfig. If you've installed security software and you're having issues installing iTunes or QuickTime for Windows, you might need to disable or uninstall security software to resolve installation issues.
Restart your computer.
Install iTunes.
Thank you for using Apple Support Communities.
All the best,
Sterling

When trying to install Itunes 10.2 I get an error message "Could not access network location %APPDATA%\." How can I fix this?

When trying to install Itunes 10.2 I get an error message "Could not access network location %APPDATA%\." How can I fix this?

With that particular variety of 1606 (it's a 1606 error message even though the 1606 error message number isn't returned by the iTunes installer), the following Microsoft document is worth a try:
You receive an "Error 1606" error message when you try to install or remove a Microsoft program

Access denied when trying to install itunes on windows 7

Similar Messages

Maybe you are looking for