Access dial-up help

Sorry, stupid question.
I need to start a dial-up connection for telnet from my java application and i haven't a clue where to start. i use telnet extensively, but have never had to start a dial-up. can someone point me in the right direction.

I know that in Windows, when Windows sockets is initialized by your application (the JVM automatically does that), then it will automatically connect to whatever dial-up connection you have configured as your default. I believe the Mac does the same.
That only applies if you are using sockets. If you are trying to write your own terminal application, like old school Procomm Plus and stuff, check out:
http://java.sun.com/products/javacomm/
It has a bunch of serial port communications stuff and is geared towards dial-up based stuff like that.
Hopefully that helps, it might not.
Jason

Similar Messages

  • Rsa securid with remote access dial-in service problem

    Hello,
    I tried to setting rsa secured with remote access dial-in service on cisco 2600 box. Everything works well except when token in new pin or next token mode. The dial-up client can not enter second passcode, do not have second pop-up window, so all authentications was fail. My dial-up client is windows 2000 or xp.
    Please suggest me too.
    Thanks,
    Nitass

    While I agree with you that the terminal window solution is more complex and less user friendly than the standard Windows DialUp window/authentication, the terminal window does provide a solution to the new pin or next token issue which the standard Windows does not.
    I work with a customer who uses RSA token to authenticate dial in users. We have found the solution to the issue you are dealing with to be either the terminal window where the user can deal with their problem or to have someone take administrative action on the RSA server to reset/resync the users token.
    So as I see it you have a choice to make: either present terminal window as an alternative setup on the user PC or when they can not login on dial up have them call the Help Desk and have someone deal with it for them. One solution is somewhat less user friendly but does allow the user to deal with their own problem, and the other solution is more user firendly and puts more load on the Network Support staff.
    I would also wonder why you have so many users in new pin and next token mode? Perhaps if you can figure how to minimize the frequency of these modes you can minimize the problem of difficulty authenticating for your users.
    HTH
    Rick

  • I'm trying to set up a iTunes allowance account for my 11 year old daughter, I set up the account but put in the wrong email address, now it's trying to send the verification email to an old addy I no longer have access to. Help.

    I'm trying to set up a iTunes allowance account for my 11 year old daughter, I set up the account but put in the wrong email address, now it's trying to send the verification email to an old addy I no longer have access to. Help.
    I've tried looking at my own itunes account but I cannot seem to find the allowance account, it says I currently have zero allowance accounts.
    All I want to do is change the assigned email address.

    Who is the email provider? Not all accounts can be set up as POP3

  • I upgraded to Mountain Lion (MacbookPro). Now when I open ical I get a popup window with a list I had added to Reminders app with the message 'Your calendar couldn't be refreshed' it won't go away-'delete' is greyed out-can't access calendar! Help!

    I upgraded to Mountain Lion (MacbookPro). Now when I open ical I get a popup window with a list I had added to Reminders app with the message 'Your calendar couldn't be refreshed' i--t won't go away-'delete' is greyed out--can't access calendar! Help!

    I upgraded to Mountain Lion (MacbookPro). Now when I open ical I get a popup window with a list I had added to Reminders app with the message 'Your calendar couldn't be refreshed' i--t won't go away-'delete' is greyed out--can't access calendar! Help!

  • Network Magic v 5.5 I cannot access the online help from the links within NM

    When I try to access the online help from any link button in NM V5.5 including the main help > Help center > Network magic help, the browser will open and resolve address ,  Status bar will state done but I have a blank page.
    The URL in the address bar is
    http://go.purenetworks.com/redir/webhelp/nm/_cover.htm?pn=nm&a=5.5.9195.0&as=0&ad=2&bt=shp&b=Pure&dc=Pure0.LinksysRouterSetup&dt=OLN&k=1611759616&ct=cisco&ag=d9429c0fe2fd40b9&g=d04c74e28eb95300%2Cb2610a4f03b2f988&lcid=1033&ulcid=2057&am=99&it=upgrade
    I am running windows 7 Ultimate,  have tried 
    Firefox  3.6 and
    IE 8.0  -- I have put the Url into the trusted zone  and the web page will again show up as done and status bar shows trusted zone
    I have tried all this with my Firewall & AV (Kaspersky Internet Security 2010) both on and disabled
     NB  The "ask linskys link works" as does the "community forums"
    The Main help > Help center >Getting Started also works.
    ( I am running the WRT610N Router set up by Network Magic)
    Many Thanks

    I've seen this too use http://support.networkmagic.com
    Mikro the Owner of the Linksys BEFCMU10_V4-UG Modem & The BEFSR41v4 Router.

  • I have an account in Apple Astor was not able to access it, please help me in this matter

    I have an account in Apple Astor was not able to access it, please help me in this matter
    <E-mail Edited by Host>

    What to do if your iPhone will not turn on

  • I cannot open files - they come up with an error opening this file - access denied.  Help!

    All my adobe files are now the same - they will not open at all - access denied with no reason other than an error!  Help!

    Hi - Strangely enough the files opened the very next time I tried!  It 
    must be my fickle computer!  My Adobe is quite new so I do not think it is 
    outdated.
    Thanks for the reply anyway - I will plough on.
    Cheers -Patti
    In a message dated 01/04/2015 09:57:13 GMT Daylight Time, 
    [email protected] writes:
    You  have been mentioned
    by  Anubha  Goel
    (https://forums.adobe.com/people/Anubha+Goel?et=notification.mention)  in Re: I cannot open files - they come up with an error 
    opening this file - access denied. Help! in Adobe Community - _View  Anubha
    Goel's reference to you_
    (https://forums.adobe.com/message/7394775?et=notification.mention#7394775)

  • When I open iTunes on my Macbook Pro, I am now getting a small window that says "Checking iTunes Library" with a pinwheel. This goes on for 5-10 minutes before I am able to access iTunes. Help! How do I fix this?

    When I open iTunes on my Macbook Pro, I am now getting a small window that says "Checking iTunes Library" with a pinwheel. This goes on for 5-10 minutes before I am able to access iTunes. Help! How do I fix this?

    I have the same problem. It is only with tv shows and only with programs I have downloaded after the software update.
    Apple support sent me the above link too....but it doesn't solve the problem...my computer is authorized and the content is in my library and will play on my Mac air, but it will not sync the tv shows, it keeps saying my computer isn't authorized for it.
    No answers here, but you are definitely not alone with this issue.

  • Hello, I have a problem with my Yahoo Messenger, I can't join in chatroom. It's prompting like "yahoo error, you've been refused to access"..please help me..thanks

    Hello, I have a problem with my Yahoo Messenger, I can't join in chatroom. It's prompting like "yahoo error, you've been refused to access"..please help me..thanks

    post in a yahoo messenger forum.  These forums are for apple products and software.

  • Using F1 to access the online help in Visual Studio 2013 does not work anymore! Any help available?

    Hi,
    since some days I get the following message after pressing F1 in VS2013 to access the online help:
    Any help to solve this available?
    Kind regards,
    Martin
    Martin Lemburg Berlin / Germany Martin0815@twitter martinlemburg@facebook http://about.me/Martin0815

    Hello Martin,
    could you try clearing you browser cache like indicated here:
    [1] http://blog.mischel.com/2011/09/13/cant-get-help/
    If this does not help, please try changing your default browser to find out where the problem is located.
    Regards,
    David Schneider
    Developer-Hotline for MSDN Online Germany
    Disclaimer:
    Please take into consideration, that further inquiries cannot or will be answered with delay.
    For further information please contact us per telephone through the MSDN-Entwickler-Hotline:
    http://www.msdn-online.de/Hotline
    For this post by the MSDN-Entwickler-Hotline the following terms and conditions apply:
    Trademarks,
    Privacy
    as well as the separate
    terms of use for the MSDN-Entwickler-Hotline.

  • My computer crashed before i was able to deactivate my Visual Communicator 3 software.  Please help!  I have my disc, but cannot activate my software again.  I have several projects that I cannot access. Please help!

    My computer crashed before I was able to deactivate my Visual Communicator 3 software.  Please help!  I have my disc, but cannot activate my program again.  I have projects that I cannot access. Please help!

    I wish I could help, but I am in a similar situation.
    I need to deactivate it because we are getting rid of the computer it is on and are buying a new one. When I go to Help there is no Deactivate option. The only options are: "Help", "Hide Coach", "Tip of the Day", "Adobe Website", "Technical Support Website", "Frequently Asked Questions", "Check for Updates", "Register", "Download e-License..." (Greyed out), "Return e-License..." (Greyed out) and "About Adobe Visual Communicator 3". I spoke with support through chat and they said my product was no longer supported.
    Patrick

  • T43 Accessing the IBM Help button, or any of the help material

    I'm new, so please excuse my noviceness. I bought a refurbished T43, wanting to get into the ThinkPad. I went to a green refurbisher and all was well. However......
    It has XP. When I try to access the blue help button, or any of the instructional material, nothing happens.  (I understand there is no user manual, so it important for a newbie). I presume the refurbisher  just wiped the system clean, and only installed XP and a couple of other things.
    How can I get this instructional material back and working.
    Once again, thanks, and sorry for the lame knowledge on my part.
    Solved!
    Go to Solution.

    dstortz, welcome to the forum,
    you can visit this site to find all the necessary drivers / tools for your T43. You will need the Access Help users online guide and almost certainly the HotKey Utility, please ensure you download and install the versions for your system type.
    Another method would be to see if System Update can find them for you. MS .NET Framework 2.0 will be required for this, instructions are posted on the site.
    Hope this helps
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • 6600 access point - pain / help me

    I've just got me hands on a 6600 and it keeps asking me to select an access point (ie: GPRS or my provider) if I say yes it dials up the number - if I say no (cancel) it go's away for about a minute then "pops" back up - can anbody tell me how to STOP it poping back up!!! its driving me round the bend
    ps - I have looked in the providers manual (not a Nokia manual) and its no help.
    Thanks

    Does this help: http://discussions.nokia.co.uk/discussions/board/message?board.id=messaging&message.id=89&query.id=0...

  • How to access dialing lists in UCCX 8.0?

    Hello Pros
    This is our first UCCX live environment and among the issues we have faced is the fact that we haven't found a way to "easily" (that means not through pure SQL queries) access the dialing lists from the Outbound Preview Dialer once they have been processed.
    What we are specificaly looking for is to "improve" those dialing lists by checking the callResult field to discard those that are wrong numbers, faxes,etc. In order to have more efective campaigns in the future.
    We have looked for documentation regarding this with no success.
    We are running:
    CUCM  8.6.1.20000-1
    UCCX 8.0.2.11005-20
    Any help will be highly apprecated.
    Best regards
    Javier

    Hi Javier,
    Please check the following documentation and scroll down from page 13 onwards, let me know if this helps
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_0/configuration/guide/uccx801ag.pdf
    Thanks,
    Prashanth

  • I lost my status from Administrator to standard. Now I have no way of accessing anything into my mac. How did this happen? And how can I go back to being a admin? I'm the only account on my mac and now I cant access anything. Help Help!!1

    I lost my status from administrator to standard and now I have no access to anything on my mac. I'm the only account on my mac. How did this happen? and what can I do to fix this? Help Help!!!

    anastasia808,
    which model Mac do you have, and which version of OS X is installed on it?

Maybe you are looking for