"Access Key" to activate domain "P106_AMT11" in ABAP Dictionary
Hello folks.
I tried to activate domain "P106_AMT11" in ABAP Dictionary.
But Netweaver requires "Access key".
How can I obtain it?
I've checked some threads on "access key".
Some people wrote "ask Basis Consultant".
But I'm not acquainted with any Basis Consultants.
Could someone please help me to get an "access key"?
Hello,
Every S user id may not have the authorization to generate the object key. Its a task of "Basis administrator", they generally have the authorization to generate the object access key.
If your S user ID has the necessary authorization, then
Go to https://service.sap.com/sscr > Register Object
You have to give the below information while doing the object registration.
Basis Release = <select your release version>
PgmID = R3TR
Type = DOMA
Object name = P106_AMT11
- Select the correct installation # under the "select installation"
Note - SSCR developer or object key depends on the installation, the correct installation no. of your system.
You can follow the below note for more details.
https://service.sap.com/sap/support/notes/40850
Regards,
Debasis.
Edited by: Debasis Sahoo on Oct 15, 2008 3:12 PM
Similar Messages
-
Access Key for Trial Version Web Dynpro ABAP 7.01 and 7.02
Hi Guys,
Can someone tell me, what is the Access Key for Trial Version Web Dynpro ABAP 7.01 and 7.02
Regards
Sankar>
sankar.cgsl wrote:
> Hi Guys,
>
>
> Can someone tell me, what is the Access Key for Trial Version Web Dynpro ABAP 7.01 and 7.02
>
>
>
> Regards
> Sankar
HI Sankar,
I think it is not to get from this forum. You have to download the trail version and follow the instructions for installation.
Once you installed the software, you can request for the License key with your SCN credentials.
Follow this link for 7.02 Trial [/people/horst.keller/blog/2010/12/09/abap-trial-version-702-available-in-scn|/people/horst.keller/blog/2010/12/09/abap-trial-version-702-available-in-scn] -
Where can I find an Access key for the user with "AS ABAP sneak preview" ?
Hi all,
I have installed AS ABAP sneak preview on my laptop.
I use username "bcuser" and password "minisap". when I try to create some objects like, i.e. Function Group for Function Module, then it ask for an access key.
Where can I find an access key for this ABAP SNEAK PREVIEW for user "bcuser"?
I have gone thru some documents, I know we need to register user in OSS and need to get an access key from the marketplace but can I register this user "bcuser" or it's already register? I need some more specific information to resolve this issue.
Please advise me on above question.
Thanks,
Haresh SolankiHi Rich,
I have entered ZH_XYZ as a Function Group name to create a new function group. While I am creating it, it asks for the Access Key. I tries to enter an Access Key here for the first time and it says wrong entry for access key.
Also if I try to create new Function Module, it ask me to select the Function Group. As I couldn't create a new Function Group, I tried to select from existing(from SAP System's FG), still it asks for an access key, I enter the an Access Key here, then also it says wrong entry.
I really got confused with this Access Key thing, can you provide me some insights?
Thanks,
Haresh Solanki -
Access keys: please direct me to info for my help file?
I set up my web pages with access keys for mouseless navigation. I have been given to believe that, on a Mac, one may hold Alt and press an access key to activate the desired function.
(E.g., accesskey="9" for the "Contact us" page is acquired by holding down Alt and then pressing 9).
This seems not to work in Safari 3 Public Beta for Windows, and I can't find a Help file for it, or a thread here. Does anyone have a hint to offer?Actually, its not a coding error...
ALT+1 opens the first item in the Bookmarks Bar.
I already sent a Bug Report to Apple for them to provide us developers a way to override special keys (F1, F5, Ctrl+P, etc). Easy to do in IE but all the ways I've tried in Safari came up wrong.
Let's wait for the next beta... at least in 3.0.5 this problem remains.
Also, if anyone has a workaround, I would gladly appreciate it. -
Hi all,
I need to create program of ABAP. It need access key for creating. How to get access key?
Please advice,
DuypmHi Duypm,
You have to register the user as developer.
Login to the service market place service.sap.com
Keys & Requests -> SSCR keys ->Register Developer-> give the user id and from below select the installation number and click on register you will get the key.
Use that key when prompted in sap.
Regards
Ashok Dalai -
ABAP access key & install step for IDES ECC 5.0 oracle database
Hallo
if you have installation guide/steps for IDES ECC 5.0 (Oracle database) then please send me. also if you have ABAP access key for the IDES ECC 5.0 (SQL 2005 database) . My system details as
SID=ERP
instance no=00
host=sapsrv
database=SQL 2005
Waiting for faveroable replyI really appreciate response for my question.
I am trying to install a non-IDES version of ECC 5.0 (central, database, and dialog instances).
Questoin : Do I need install Solution Manager 3.2 on the same server where I am installing ECC 5.0? -
How to get Access key for ABAP Program development in HANA Studio
Hi,
I have got instance for ABAP on HANA development system.
But while creating new program it is asking me for Access key, since I do not have user id pwd for service market place I couldnt able to create the access key.
Can any one suggest the way to create ACCESS KEY??
Thanks,
RamDear Ram,
it seems that you need to follow the chapter 6.1 in the documentation...:
Kind regards, Stephan -
IDES ABAP Workbench and access key
Hi everyone,
I am new to SAP, please Help.
1. How i can use OSS ID.
2. I installed 4.6B IDES, but ABAP - Workbench is not
accessable.
3. How i can get Access Key for ABAP Workbench.
Thanks in Advance
ShareefHi,
If you have OSS ID, you can use it to logon to service.sap.com where you have all kinds of support and help services available. That is where you use it.
ABAP workbench will be accessible if you have authorization. I think you mean to say you are not able to create/change objects. For this you will have to register your userid as developer (again at service.sap.com) and that will give you the developer access key that you can then use.
If you are changing any SAP object, you will need to get the corresponding key from OSS.
If you do not have OSS logon, then you can forget about it (well, not strictly so, but that is the official 'truth'.).
cheers,
Ajay -
How can i get the ABAP developer access key?
Thanks you all!!
I tried so many times but i got the error
Authorization Error! Currently you do not have authorization to use this function. To request the authorization, please contact one of the administrators at your company:
Then I reported my administrator, but unfortunately he also got the same Authorization Error!!
I don't know, the correct way for getting the access key. -
About ABAP developer ACCESS KEY
Hi guys:
I have installed IDES 4.6c successfully,When I created ABAP program using SE38,system prompted "You are not registered as a
developer.Please register in the Online Service System (OSS).In the OSS you will receive an access key."
My question: How can I login OSS?Tcode,Could you please tell me detail operation? thanksOSS is not a tcode , check the site service.sap.com
consult your basis for that...
also check the table DEVACCESS for the access key by giving ur user id if there is one already created for u -
ABAP Access Key for Table change mode MCVKUSR & MCVBAPUSR in SE11
Dear All,
I'm using SAP ECC6.0. I want to create a new database table in the dictionary to be used in my programs. I proceed in the following way:
1. I run the SE11 transaction
2. At the first entry I write the name of the table to be Change created ( Display mode Showing )
3. I click on the change button.
4. It will ask for Access Key
But then the system asks me an Access Key , where can I get this?
I have SAP License Key.
DB Table Name : MCVBAPUSR & MCVKUSR
Please Let me know
Thanks in advance,Dear ,
I go to Service market Place site, from SSCR Tab then I have to select a object from the list is TABL.
and enter the Particular Object & Table Name . Now I got it Access key for Particular Object.
Thank you for your quick Response.
Once again Thank u.
Regards
Thomas.T
Edited by: thomas_raja on Jun 5, 2011 6:24 AM -
Access key requested when creating new program in abap editor
I am trying to create a new program in sap netweaver 7.01 trial version. netweaver promts me for creating object confirmation but after that I get a register object dialog box requesting an access key on the demosystem installation. where can I find such a key.
please note that I am not a SAP customer. Its a trial version of netweaver 7.01 on a stand alone pc. Furthemore I know that naming my programs starting with Z will bypass the object registration key.Hi ,
when you are using the first time se38 it will ask developer access key
u will get that from the service market place
take the help of u r basis consultant
regards, -
Web Dynpro ABAP Component configuration - Invalid access Key
Hi Friends,
I have copied HRESS_CC_MENU_OVP to ZHRESS_CC_MENU_OVP and trying to configure it. Even after registering the object it is giving the same error Invalid access key.
We have registered HRESS_CC_MENU_AREA_GROUP and the access key worked fine. But registration for HRESS_CC_MENU_OVP is giving error Invalid access key. We have deleted and registered the object thrice but system is giving the same error.
Can someone please suggest me where I have gone wrong.
Thanks,
RaviHi,
Each component will have different access key. you cannot use the same access key to different application.
You can try with different access key else you have an option of enhancing the HRESS_CC_MENU_OVP.
Regards,
Jyothi -
Dear All,
I am new in SAP System you you explain me when i create a program in sap system genrate a messge for access key where i found these key or any other ???????
Regards
Pritpal MehruHi Pritpal,
Welcome to SAP world.
when you create a program in SE38 first time system will as for Developer Key at that time you need to consult your BASIS Admin for Developer key then basis person will give you access key againest your user id.
if you give me brief i can help you out more.
if helpful REWARD points
Thank you .
Regards
Ram -
Access key error for ABAP user in Development
Hi,
I am getting the following error while entering the development access key for Development client 103Syed Amir Ijaz Bukhari wrote:
i get this key from SAP Market place my basis administrator generated it at front of me but still it is not working as if i place it in IDES it worked but not in Development.
Compare the installation number of your IDES system with that of your development system. Do you see? They're different. Different installation requires a different key. Go and have another chat with your basis friends.
Maybe you are looking for
-
Can't drop components on new page after upgrading to Update 5
Please need some help. Today I upgraded to Update5. I created a new page in an elder project, created with the prev version. When trying to drop a component on the Designer a got following error-message: You cannot drop components on plan HTML docume
-
Is there any way to read the pdf file in java
Hai, i need some advice from anyone that is there anyway to read the pdf file directly from java... Without converting to other files(txt,html) if it is possible please help me.. Thank you
-
My iPhone keeps resuming playback after certain tasks even if nothing was playing
When doing certain things on my iPhone like using Siri or watching a video if I'm listening to music then the music pauses while the thing is happening and then it resumes once the thing has finished. However recently (since iOS 6) when I use Siri bu
-
Password reset option difference b/w Oracle 11g R1 and R2
Hi, I came to know that the password reset option is different comparing 11g R1 and R2. My understanding is as below. For R1, you need to do a password reset for the user id separately and for the account access which that particular user id has acce
-
In a label to display a field and searchelp on it...
hi, I want a label "color" in selection screen logic and wle running program once i get the input parameter color label and pressing f4 i need to get the values like red, blue,green etc....