Access Plug In for 9.2.0.1.7

Has anyone got the Access Plug In for 9.2.0.1.7 to work? I seem to be missing something in the install/copy process.

Hi Eileen,
Please note that a problem with the OTN downloading functionality caused the plugin jar files to be renamed with an additional ".ZIP" extension.
For example, the MSAccess.jar file was being renamed to "MSAccess.jar.zip" during the download from OTN.
The OTN problem has since been resolved and the plugins should now download with the correct name. If you are going to download again, please remember to remove the ".ZIP" versions of the plugins from your %OMWB_HOME%\plugins directory.
However, if you do not wish to download again, you can:
1. Shutdown the OMWB
2. Navigate to the %OMWB_HOME%\plugins directory and rename all of the plugin files so that they do not have the ".ZIP" extension. For example, you can simply rename "MSAccess.jar.zip" to "MSAccess.jar".
3. Now restart the OMWB and the problem should be resolved.
I hope this helps,
Tom.

Similar Messages

  • Adobe Access plug in for Internet Explorer 10 on Windows 8

    Is Adobe Flash Access (DRM) built into Internet Explorer 10 on Windows 8? If so, what is the best way to remove the Flash Access DRM plugin on Windows 8 (using IE 10)? In the past, I would have just removed the NativeCache and APSPrivateData2 folders from the AppData/Roaming/Adobe/Flash player folder. However, if I do that on Windows 8, and try re-install the Flash Access plugin by playing a Flash Access encrypted video, I encounter alot of problems trying to play back a Flash Access encrypted video in Metro mode with IE. Does IE use the same Access plug in for both modes (Desktop and metro)?

    Hi Hiroshi, thanks for the help. I'm trying to test that my video player will download the Adobe DRM plugin if its not already present on the system. I've had to do this with previous versions of Windows, and I wanted to make sure the same functionality worked on the new Windows 8 64bit tablet. When I did this on the tablet (removed the DRM plugin from the AppData/Roaming/Adobe/Flash player folder), and played an Adobe Access protected video in IE on the desktop mode, the expected behaviour occured, i.e. the browser downloaded the DRM plugin, and playback continued. However, if I then go to play back and Adobe Access protected video on IE in Metro mode, the video doesn't playback. it seems to get stuck trying to download the plugin, even tough its already been downloaded and re-installed on the system, and the video won't play.
    So I was just wondering, now that Flash is built into IE 10 on Windows 8, is Adobe Access also built in (does the user ever need to download the DRM plugin on Windows 8)? And also, is there any reason that IE in metro mode would have trouble using an Adobe Access DRM plugin that was downloaded by IE in desktop mode on Windows 8? The Flash Player version is 11,3,376,12
    Thanks again

  • Microsoft Access plug-in for oracle migration workbench

    I would like to migrate from Microsoft Access to oracle 10g,but Microsoft Access plug-in had not found on web site oracle.com.
    Where can obtain the Microsoft Access plug-in?
    Thanks!

    Hi,
    Oracle SQL Developer 1.2 incorporates the Migration Workbench, providing users with the ability to migrate database objects and data from MySQL, Microsoft SQL Server and Microsoft Access to Oracle. Oracle SQL Developer release 1.2.1 can be downloaded from OTN - http://www.oracle.com/technology/tech/migration//workbench/index_sqldev_omwb.html.
    I would recommend that you review the accompanying documentation - http://download.oracle.com/docs/cd/E10405_01/doc/nav/portal_booklist.htm - to ensure that you understand how to use the tool for the migration of your MS Access MDB file.
    Regards,
    Hilary

  • Where to download the SQL Server 2000 plug-in for Migration Workbench

    Dear All,
    I am new to Migration WorkBench, I want to migrate the SQL Server 2000 database to Oracle 9i. When i start the Migration WorkBench, it requires me to select the plug-in (SQL Server) for the migration source. Before i have download and install the Access plug-in for testing. Can anybody tell me where i can find the SQL Server 2000 Plug-in for migration workbench.
    thx.
    Alan,

    here on OTN; on the same page like all the other plugins:
    http://otn.oracle.com/software/tech/migration/workbench/htdocs/utilsoft.html

  • I want to uninstall Acrobat reader. I got support in the community to access my HD and to send to trash the internet plugs in for PDF viewer, but when I try to download a PDF from internet a black screen appears and preview doesn't open

    I want to uninstall Acrobat reader. I got support in the community to access my HD and to send to trash the internet plugs in for PDF viewer, but when I try to download a PDF from internet a black screen appears and preview doesn't open

    Back up all data.
    Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • How do I access Camera Raw Plug-in for PSE 11?

    I can't figure out how to access the Camera Raw plug-in for Photoshop Elements 11 ( on a Macbook Pro OSX.)  I recently installed  PSE 11, and when I select "about plug-in" within the app, it brings up a box that shows version 7.1.0.354.  Does that mean it's already installed?  If so, how do I access it to edit a photo? In past PSE versions I simply chose "Open file / as Camera Raw" but that option doesn't come up.

    In the File Open dialog ensure you have All Readable Documents selected for Enable.
    Click on the file you want to open
    Change the Format to Camera Raw

  • Programmatically Accessing Self Sign in Plug in for Digital Signature

    Hello There,
    We are looking forward to use “Adode Acrobat 9 Pro – Self Sign in Plug in” for one of the application to digitally sign PDF document i.e. appending signature to existing PDF document. We have gone through Adobe site (http://learn.adobe.com/wiki/download/attachments/52658564/samplesignatures.pdf?version=1 ; http://www.adobe.com/ap/epaper/tips/acrsignatures/ ) and explored “Tips and Techniques” along with screenshots.
    We would like your help on following queries:
    ·         Can we programmatically from C#.NET access Adobe Object and create certificate for digital signature? If Yes, can you please provide pointers, references and sample code snippets? [We understand that we do not need to purchase SDK as Professional would be sufficient for digital PDF signature]
    ·         Does Adobe Pro installer provide DLL which can be leveraged in Code base i.e. C#.NET?
    ·         How does certificate management work for digital signing? Can third party like verisign, local computer / certificate from organization server work for digital PDF signature?
    ·         Please provide Technical Reference manual to use Adobe from C#.NET
    ·         Can you please throw some light and pointers on Licensing and Cost?
    We are running on a deadline hence your quick help and response will be highly appreciated.
    Thanks & Regards

    best check on the sdk forum:
    http://forums.adobe.com/community/acrobat/acrobat_sdk
    sdk docs can be found here:
    http://www.adobe.com/devnet/acrobat/?view=documentation

  • Make Flash Plug-In for Firefox Remember Privacy Settings for Camera and Mic Access on Local File

    My company is using Flash Player to develop some kiosk-style applications to run on a standalone computer (no network connection). This computer will contain web pages containing Flash content. They will be opened from the local HD with Firefox with the Adobe Flash plug-in (v11.7.700.224). One of the applications accesses the microphone hooked up to the computer. When this application is started, it always asks for permission for "local" to access the microphone and camera. In previous versions of our system, we could click "Remember" if we did it once and that would make it so it wouldn't ask for permissions again (in this case, the Remember option isn't available, and the site settings don't even offer the Privace tab). However, in the previous case, we were running IE with a previous ActiveX Flash version (unfortunately, this approach is no longer available as we have had to switch to Windows 8 and that changes the game with IE and Flash entirely).
    At this point, we have tried to use the Global Settings for "Camera and Microphone Settings by Site..." to enter "Local" as an always allowed site. This does not seem to have any effect. We also tried entering the root directory of the applications in "Trusted Location Settings", but that also seemed to have no effect.
    I'm not sure what has fundamentally changed here. I think there might be some differences in the Plug-In version (compared to ActiveX), but I'm not sure what they might be or how to do the same thing as before.
    Any help would be appreciated. Thanks in advance.
    Torrey

    Chris,
    We learned that the Privacy tab (in Settings) can be found under the Flash plug-in for Firefox, but only if Firefox is running under an administrator.
    Unfortunately, we haven't had much luck with the mms.cfg file. The following was used in the mms.cfg file (placed in both the %WINDIR%\SysWow64\Macromed\Flash and %WINDIR%\System32\Macromed\Flash” directories):
    AVHardwareDisable = 0
    AVHardwareEnabledDomain = local
    AVHardwareEnabledDomain = 127.0.0.1
    AVHardwareEnabledDomain = localhost
    AutoUpdateDisable = 1
    The AVHardwareEnabledDomain settings seem to be getting ignored regardless of whether the user is a standard user or an administrator. I also checked to make sure it wasn't just a local problem by going to a website that uses a microphone (http://www.testden.com/accent-reduction/systemcheck.htm). Adding the requested domain to the list (AVHardwareEnabledDomain = train.act360.com) still didn't bypass the allow/deny dialog box.
    We know that the mms.cfg file is being read because setting "AVHardwareDisable = 1" will result in no prompt and that section being greyed out in Global Settings. I saw a post that suggested this setting was required to even make the AVHardwareEnabledDomain work, but it seems to block the local entirely and still brings up the dialog query on the internet site.
    Thanks,
    Torrey

  • I am unable to access my email. I can sign in with my password, then a message comes up that says "The plug-in for this page has been disabled. Click here to manage your plug-ins." All plug-ins listed are enabled. What am I missing?

    I am unable to access my email from Charter.net. I can sign in with my password, then a message comes up which says "The plug-in for this page has been disabled. Click here to manage your plug-ins." All of my plug-ins are enabled. What am I missing?

    After a great deal of searching I ran across the suggestion to disable all plug-ins and then, one by one, enable them until finally the problem was solved. I am not sure which plug-in was causing the problem, as I am satisfied to have the problem solved. I am going to leave the rest of the plug-in disabled.

  • Disabling Adobe Reader XI's Plug-In for Safari Does Not Require Access to OS X's 'Root' Account

    Why do the instructions for disabling the Adobe Reader plug-in for Safari say that one needs to do so from OS X's root account even though one only needs to authenticate using their administrator password to do so?

    Why do the instructions for disabling the Adobe Reader plug-in for Safari say that one needs to do so from OS X's root account even though one only needs to authenticate using their administrator password to do so?

  • Experimental WIC import plug-in for Photoshop

    Hello,
    For what it's worth, I've written a small import plug-in for Photoshop, that uses WIC codecs to access the image files and thus is compatible with manufacturer-provided decoders such as the Nikon NEF codec and the Canon CRW/CR2 codec. It should presumably work with the new Nikon NRW codec, supporting the Nikon P6000 camera, when it comes out.
    This is an experimental plugin, provided on an "as-is" basis.
    http://www.fastpictureviewer.com/bin/WICAcquirePlugIn-ALPHA.zip
    There is no color-management support in this version, if you import, say, an image shot in Adobe RGB, you have to use "Edit->Assign Profile..." after importing to let Photoshop know about the image's profile. The plug-in was tested with CS3 but does not depends on anything except WIC, so it *may* work in other apps able to use Photoshop import plugins.

    New cameras need a new plug-in.  Adobe only updates the plug-in for the current version of elements.  Since your Elements is one version out-of-date, your camera may be too new.  Help / Updates in Elements should find the latest version of the plug-in that is still applicable.
    If your camera is too new, then you’ll need to purchase an upgrade to PSE 11, or use the newest DNG Converter 7.3 to convert your NEFs to DNGs that will open in an older version of the plug-in.
    You can find the various updates on http://www.adobe.com/downloads/updates using the dropdown list near the top.

  • MySQL to Oracle Plug-In for Solaris

    Hi there,
    I'm happy to see the mySQL plugin finally available.
    I want to import mySQL into Oracle 8i on Solaris.
    When will a version of the mySQL plugin be available for the Solaris version of the Migration Workbench?
    regards,
    billc

    If you kind find the link on OTN or in the CD pack, you might want to contact your Oracle Account Manager to see if you have a license or can get access to the CD on a trial basis.
    Hi,
    I need the link to download Oracle plug-in for Microsoft IIS server.
    Any help much appreciated.
    Many Thanks
    Nazeer Ahmad Syed.

  • Compile Apache plug-in for WL7.1 SP4

    Hi all,
    Several advisories of Apache have been published. We would like to acquire the latest Apache version. According to the information of BEA. Apache plug-in of WL71SP4 is only provided for Apache 2.0.42-2.0.49. As a result, a new plug-in is needed: we would like to compile one.
    We only have compiled Apache plug-in (with WL71SP4). We cannot find the source in WL71SP4.
    Does anyone know how can I compile a Apache plug-in for the latest Apache version? Preferably, we would like to use APXS for the compilation.
    Does anyone know if we can use the existing plug-in in latest Apache version? We have encountered problems before -- the plug-in refuses to start and complains about incorrect magic string of the Apache version.
    Thank you very much.
    Regards.

    I'm using the mod_wl_ssl.so for Apache on Linux from service pack 5. I
              understand that the communication from Apache to WLS will be via http...
              that's not the issue.
              I think what would solve the issue would be if someone from BEA could post
              an httpd.conf file that was configured correctly to use the ssl proxy for
              Apach on Linux. Also, I can't seem to get clarification if openssl is or is
              not supported.
              Can you post a correctly configured httpd.conf file that was used in testing
              the ssl proxy as well as confirm whether or not openssl is supported???
              Steve...
              Vinod Mehra wrote:
              > Also note that currently we do not support https between the plugins and
              >
              > WebLogic. https requests will be degraded to http. So the WebLogicPort
              > parameter in the plugins should point to the http port of WebLogic.
              >
              > https between plug-ins and WebLogic will be available in near future.
              >
              > --Vinod.
              >
              > Vinod Mehra wrote:
              >
              > > > Are there any known issues with the Apache SSL proxy???
              > >
              > > No
              > >
              > > > I've setup the ssl
              > > > proxy but can't access any WL content via https... http works ok
              > > > though. Also,
              > > > does BEA support openssl or just Stronghold and Raven???
              > >
              > > Yes. Try using mod_wl_ssl.so from 510 SP4 or later.
              > >
              > > --Vinod.
              

  • Application or plug-in for grabbing streaming video?

    I am looking for a shareware application or plug-in for Q-Time or Safari that will simply allow me to grab a streaming video I am viewing on the web. I don't need a power program.
    If anyone has a suggestion, website, other forum (I've already queried Tiger and Q-Time forums), or other direction to point me, TIA.

    CosmoPod downloads the original file format (which can be retained), then converts to either MPEG4 or H264 (Best or Better). The file conversion is dependent on your Preference settings.
    For functional purposes, CosmoPod places a Tool Icon on your Toolbar. Plus, the download/preference panel can be accessed via the Window menu. Videos can be directed to a Download location, or directly to iTunes.
    Whether or not a file can be downloaded depends on file accessibility permissions on the provider's end. Trial version gives you 5 days/10 videos, which ought to give you a sense of whether it serves your purposes.

  • How to download and install SAP Net Weaver Gateway Plug-in for Eclipse?

    I have installed the SAP UI5 development tool kit for Eclipse. What else should I do? How can I download SAP Net Weaver Gateway Plug-in for Eclipse?
    After developing the application, should I run that with Apache Tomcat? How to get the access to database?

    you can find netweaver gateway tool from SAP Development Tools for Eclipse. and follow the installation instructions

Maybe you are looking for