Access problem to FTP site

I've set up my FTP site and it works perfectly since the past two years with WSFTP on PC
Now, I have a Mac book And I'm unable to connect to my FTP server with the @connect to server@ link in the finder
I run OSX Server 10.3.9 PLZ help... It's kind of unusual to have a problem from mac to mac and no problems from pc to mac...

You could try to upgrade the router's firmware. Use for new firmware is to fix bugs that have been discovered with the router. Try to download here. That would link you to Linksys download page for new firmware of a version 2 BEFW11S4.

Similar Messages

How to connect to Access DB on FTP site

How can I connect to an Access DB that resides on an FTP Site? I can connect to it, but it downloads the database as a temporary internet file. I am wanting to dynamically update the data on my reports (and subreports) with updated data on the FTP site. Is this possible? Can I set up a connection string or ODBC connection to the database? I have been trying various things for some time and cannot solve. I am using Access 2003 database and Crystal 2008.

Hi,
Try not to access or connect to FTP, it usually download the data since you accessing FTP, try to look for other ports like http to access the database.
Regards,
Clint

ASA5520-Access to FTP site

I thought I would run this by the forum in case there is someone out there who experienced the same issue. I have users behind an ASA5520 firewall running 8.x code who are unable to access a particular ftp site through a web browser or an ftp client such as FileZilla. Keep in mind that other ftp sites are accessible. I was notified of this as it worked in the morning of a particular day and then stopped working in the afternoon on the same day. Accessing the site from our guest network(different firewall) is possible. The SysAdmin insists it is a firewall issue. I have run the packet tracer on the firewall and the traffic is allowed. FTP inspection is configured. I get the same results when I try to access with IE or Firefox. Anyways, I thought I would post the questions to see if anyone has seen something like this before. If anyone is interested, the site is ftp://authordev.healthstream.com. TIA for any help or advice.

Hi,
You could always take a packet capture on the firewall and/or on the actual host to see where the communication stops.
You could for example configure the ASA to capture the traffic between the client and the server.
Example configuration could be
access-list FTP-CAP permit ip host host
access-list FTP-CAP permit ip host host
capture FTP-CAP type raw-data access-list FTP-CAP interface buffer 10000000
You could naturally also capture the traffic on the internal side of the firewall if you want to compare the 2 captures on both sides of the firewall
access-list FTP-CAP-INTERNAL permit ip host host
access-list FTP-CAP-INTERNAL permit ip host host
capture FTP-CAP-INTERNAL type raw-data access-list FTP-CAP-INTERNAL interface buffer 10000000
You can then use the following command to confirm if traffic is captured
show capture
You can use the following command to show the capture on the CLI
show capture FTP-CAP
show capture FTP-CAP-INTERNAL
I would suggest copying the actual captures to your computer with following commands and then viewing the contents with Wireshark
copy /pcap capture:FTP-CAP tftp://x.x.x.x/FTP-CAP.pcap
copy /pcap capture:FTP-CAP-INTERNAL tftp://x.x.x.x/FTP-CAP-INTERNAL.pcap
You can remove the captures from the ASA with
no capture FTP-CAP
no capture FTP-CAP-INTERNAL
The ACLs will have to be removed separately.
These captures should give you a picture what happens to the FTP connection.
- Jouni

How can I find out the server port for a secured FTP site and creating a FTP Connection Manager

I have to create a FTP Task to go out and get the files that our 3rd party vendor will be dropping on a secured FTP site. I have all the credentials to access that Secured FTP Site and have successfully done so through FileZilla.
Now I need to set-up a FTP Task to go out and get their files and in so doing create a FTP Connection Manager. Is there any way I can determine the
Server Port number from the Secured FTP site? I let it default to 21 and tried the Test Connect and it failed.
Thanks for your review and am hopeful for a reply.

Hi ITBobbyP,
SSIS has a built in FTP task, while this only works for the FTP protocol, it doesn’t support SFTP. But there are some free clients like WinSCP and
SSIS SFTP Task Control Flow Component
available in the CodePlex which can invoked from SSIS.
References:
SSIS SFTP Task Control Flow Component approach
WinSCP approach
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to list all the files in a FTP site?

I am now using LV7.1 and trying to list all the files (with file name, file size and modified date) on both a local drive and a remote FTP site. I can manage to do on a local drive, but is it possible to list the files on a FTP site?
Thanks,
Cola

Listing files on a local drive and listing the contents of an ftp site are two different things. Access to an ftp site uses a totally different protocol. Off the top of my head, you have a few options:
Use a third-party tool that can map an ftp drive to a local drive letter. WebDrive is one such client. Note: I'm assuming Windows here.
Use the Intenet Toolkit.
Use the LabVIEW TCP/IP functions to write up your own ftp client to connect to the server, change to the desired directory, and send the command to list the contents, which you can parse and spit out as a nice little array of filenames. Check the LabVIEW examples, as I believe there's some examples on this. You should also search this board for "ftp client", as this has been brought up before, and samples have been posted.

Unable to access FTP Site via internet

Hello All,
Here is a problem that I'm facing accessing my home deployed FTP Server on Windows 2008 Server via internet. Below is the description of setup at my home.
1. I've a private network behind D-link DSL 2750U router.
2. I've forwarded Port 21 to my FTP Server in private network (FTP Server IP: 192.168.1.2)
3. FTP Site is deployed in IIS 7.5 with Anonymous access rights (so obviously no username and password is required to access it).
4. In IIS 7.5, FTP Site binding is set as "
5. I'm able to access my ftp site within private network (via command prompt and any browser).
6. I've registered a domain name ftp.tx-fr.tk for my FTP site so that I can use it from outside world and here are settings.
7. I'm able to ping this (ftp.tx-fr.tk ) domain name.
8. All firewalls are disabled for testing purpose (Will implement security later, once primary issue resolves).
Now here is the problem, whenever I type in ftp://ftp.tx-fr.tk in my browsers,
IE 9 and Chrome prompts for username and password, whereas Mozilla throws a message as "421 Login Incorrect".
Same happens when I use command prompt to access the FTP site using domain name.
Here is the funny part, when I'm prompted for username password, I typed in router's credentials (U:admin, P:admin) and I get
"Internet Explorer cannot display the webpage" in IE 9, "421 Login Incorrect" in Mozilla.
Whereas when CMD is used to access the site, I'm able to log in using router's credential but none of the command executes
Now is there anyone who can assist me resolving this case?
Kind regards,
Aniruddha

I would have ask in IIS forums: http://forums.iis.net/
Thanks

Unable to access ftp sites

FF 32.02 on Windows 8.1 Pro 64-bit. Attempting to access ftp site produces the following error message popup:
211-Features:
AUTH SSL
AUTH TLS
EPRT
EPSV
MDTM
PASV
PBSZ
PROT
with the following page displayed after acknowledging the popup:
The connection was reset
The connection to the server was reset while the page was loading.
The site could be temporarily unavailable or too busy. Try again in a few moments.
If you are unable to load any pages, check your computer's network connection.
If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
Cuting-and-pasting the same URL into IE 11.0.9600 results in the page displaying with no problems. Therefore, there is none of the 3 suggestions is the problem.

The county ftp site doesn't act strangely for me.
I'm not sure whether these general suggestions are applicable to ftp sites, but just in case:
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
"3-bar" menu button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* (menu bar) Tools > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help?

I cannot access ftp sites even after loading "Seahorse/fireFTP". What do I do next?

I need to access and upload info to an ftp site but I get an error message each time I do. It doesn't work in IE either. How can I access the site

... I really can't afford to go back and re-buy all this music (which I shouldn't have to do in the first place).
No you shouldn't. Bear in mind, though, that Apple has set this up as a user-to-user board so all we can do here is try to help you figure out why the authorization procedure isn't working correctly for your new computer.
There have been a variety of issues reported with iTunes and Windows Vista, some I believe related to the authorization procedure. So the first thing I'd do is make sure you've downloaded and installed iTunes 7.1 which was just released yesterday.
That may solve your problem. If not, click on the Review Authorization Count link in the Why can't I authorize one of my computers? section of this Apple Support page and let us know how many authorizations you're using.
Be patient and we should be able to figure this out.

When accessing an site vis FTP, is it possible to view the ftp site in page mode or in some fashion that will allow file editing?

I can use Microsoft Explorer to edit my web site in ftp mode. They provide the feature under the right side screen "Page" and then drop down to the bottom - "open FTP site in page mode" or in Windows Explorer. This will allo editing and moving of ftp site files. It does not seem possible to do this with firefox. I can access my site via ftp with Friefox but cannot edit, move, delete, upload, etc.

I can use Microsoft Explorer to edit my web site in ftp mode. They provide the feature under the right side screen "Page" and then drop down to the bottom - "open FTP site in page mode" or in Windows Explorer. This will allo editing and moving of ftp site files. It does not seem possible to do this with firefox. I can access my site via ftp with Friefox but cannot edit, move, delete, upload, etc.

Problems in accessing an SSL enabled site through Weblogic 6.1

Hi,
We want to connect to an SSL enabled site (https://test.SalesForce.com) through Weblogic 6.1. We are using JDK1.3.1_08 and Apache axis.
We have followed the appropriate steps explained in the URL -
http://www.pankaj-k.net/WSOverSSL/WSOverSSL-HOWTO.html
As mentioned in the above link, we made the configurations in JDK 1.3.1_08 to put the jsse.jar and other important JARs in jre\lib\ext folder and also updated the java security file to add the proper "Provider".
After that we tried to execute the test application to connect to an SSL site specified in it. It is a stand alone Java application and connects to the site and reads the bytes of the home page and displays them on the console.
When we tried to connect the SalesForce test site, we figured out that we were able to connect to the site and were able to read entire stream of bytes.
Then we copied the same code in a sample JSP, set the JDK1.3.1_06 as the JAVA_HOME for Weblogic6.1 and tried to connect to our test site through that JSP.
We observed that it is connecting to the site but reading just a few initial bytes and not the entire stream.
When we tried the same steps with Weblogic8.1 and JDK1.4.2_X, it works fine and reads the entire page with Weblogic8.1 as client.
So, we observed that the standalone application works fine with JDK1.3.1_08, it also works fine on the the Weblogic 8.1 and JDK1.4.2_x combination, but when we use Weblogic6.1 and JDK1.3.1_08, it does not work properly.
Is there any setup issue in Weblogic 6.1 regarding connecting to a SSL enabled site?
Our actual problem scenario is a bit different than this, but we are sure that it is related to this situation and a solution to this problem can resolve the actual problem.
Another question we have is do we need to configure SSL in Weblogic 6.1 and also care for installing certificates evenif Weblogic 6.1 in this case is a mere client?
We have tried to connect to the same site using Weblogic 8.1 and JDK1.4.2_X. We did not require any kind of certicates in that case. Hence I want to clear my doubt.
Please help.

Hello,
Just wondering if you ever found a solution to this problem. We are suffering just about the exact same issue, where our environment with WebLogic 6.1 SP4 cannot access an SSL enabled site, but our WebLogic 8.1 SP2 upgrade environment can. The only difference we've been able to pinpoint is that our 6.1 server connects via TLS1.0 (SSL3.1) and our 8.1 server connects via SSLv3 (SSL3.0). Does anyone know how to control which version of SSL WebLogic 6.1 uses?

Load XML file to XMLTable from FTP site Problem Oracle9i Release 9.2.0.7.

Hi,
I was wondering if it is possible to load XML file from FTP address directly to XMLType Table?
Can someone help me?
For example I have ftp site "ftp://test" and on this site I have file "file.xml"
and I would like to load "file.xml" to table "xml_tab" ?
I tried to use "load_xml" procedure and set DIRECTORY "xml_dir" to 'ftp://test' but I get this error
exec load_xml(p_dir=>'XML_DIR', p_filename=>'file.xml');
ERROR at line 1:
ORA-22288: file or LOB operation FILEOPEN failed
The network path was not found.
ORA-06512: at "SYS.DBMS_LOB", line 504
ORA-06512: at "P.LOAD_XML", line 8
ORA-06512: at line 1
Procedure looks like this:
(p_dir IN VARCHAR2,
p_filename IN VARCHAR2) AS
l_bfile BFILE := BFILENAME(p_dir, p_filename);
l_clob CLOB;
BEGIN
DBMS_LOB.createtemporary (l_clob, TRUE);
DBMS_LOB.fileopen(l_bfile, DBMS_LOB.file_readonly);
DBMS_LOB.loadfromfile(l_clob, l_bfile, DBMS_LOB.getlength(l_bfile));
DBMS_LOB.fileclose(l_bfile);
INSERT INTO xml_tab (
id,
filename,
xml
VALUES (
xml_tab_seq.NEXTVAL,
p_filename,
XMLTYPE.createXML(l_clob)
COMMIT;
DBMS_LOB.freetemporary (l_clob);
END;
I have tried also with this
select xdburitype('ftp://test/file.xml').getCLob() from dual;
but i get error
ERROR:
ORA-31001: Invalid resource handle or path name "ftp://test/file.xml"
Can you pleeeeeeas show me a way to do this, thanks ???

This will not work.. Ypu cannot use FTP to 'PULL' a document into the database. (Yes I know there's a placeholder for an FTPURITYPE() but it was never implemented).
However you can use an FTP client to PUSH content into the XML DB repository. If the content is schema based XML associated with a known (registered) XML schema the content of the file will automatically be stored in the default table associated with the root element of the file. If the content is not associated with an known XML schema you can then use xdburitype to read the resource that was created when the document was uploaded into the repository

Safari doesn't open ftp site

Every time I try to access a ftp site through safari it opens firefox. It used to open the ftp site but now it doesn't work. Any suggestions? I'm using version 2.0.4
Thanks

Avast is the problem. This is a list of links for threads regarding Avast and the issues it can cause on your Mac > Community Search: Apple Support Communities
Follow the instructions for uninstalling Avast > How to remove Avast Antivirus from a Mac
If you really want to have anti virus software installed on your Mac, try Free Antivirus for Mac Tool Download | Sophos
Do not install Sophos before completely removing Avast.

Cant open ftp site on ipad

Hello. I have to figure out a way to allow ipad users to open a specific ftp folder from our ftp site on their ipads. so far when i attempt to open the ftp url safari tells me i have no permission. if i try it at my computer it works properly and prompts me for a password. the only option i have found is to give these people access to the whole ftp site via one of the many ftp apps out there. the problem with that is they may end up deleting something they shouldnt or seeing something they are not supposed to have access to.
ftp://[email protected]/CEB%20Joint%20meeting%20October%2017 is the url

Try to reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.

My regular FTP site suddenly times out - after onl...

Hi
Not sure if this is the right forum but due to some problems I found myself unable to pay the monthly bill by the due date. After some time going round in circles with the famous auomated menus I managed to find a real person and explained the problem. I asked if I ould have until 19th February to pay. They said the latest they could allow was 14 February UNLESS I was able to to pay £20 - £30 towards total of £51 before that.
I managed to borrow £20 which I paid online and I was still connected on the 14th and today too BUT my website FTP which I access daily has suddenly stopped connecting giving me a time out message. No one else using it has experienced any problem.
So I was wondering whether it was possible that BT have decided to block my access to this IP of this FTP site until the balance of the bill is paid. I have no evidence of this except the co-incidence that the last day they would originally give me to settle the bill coincides with the sudden inability to connect to my FTP site. (I can connect to other FTP sites that I use occasionally with different IP's with no problem.)
Any suggestions appreciated.
Solved!
Go to Solution.

Hi Shadowmike,
I don't think this issue has anything to do with BT billing restrictions. When your broadband is restricted due to payment issues you can not access any sites and you get redirected to a BT.com payment page.
Neil
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

OTN FTP Site is out of reach !

Hi,
I'm unable to successfuly connect to OTN ftp site since monday
(I wanted to download the new JDeveloper3). I logged from
different machines with differents accounts. Whatever I'm doing
the site appears to be down. Does someone experience the same
problem ? If so, when will it be fixed ?
P.S. It's quite possible that this topic is addressed in a
newsgroup but I don't have access to any of them for the moment.
Thank you very much for any advice,
P. Jagstaidt
null

Patrick,
Do you mean OTN, or the Oracle Store? At any rate, I've notified
the OTN admin folks. With problems like these, you can click on
the 'Contact Us' link in the upper right corner of the OTN home
page.
Laura
Patrick Jagstaidt (guest) wrote:
: Hi,
: I'm unable to successfuly connect to OTN ftp site since monday
: (I wanted to download the new JDeveloper3). I logged from
: different machines with differents accounts. Whatever I'm doing
: the site appears to be down. Does someone experience the same
: problem ? If so, when will it be fixed ?
: P.S. It's quite possible that this topic is addressed in a
: newsgroup but I don't have access to any of them for the
moment.
: Thank you very much for any advice,
: P. Jagstaidt
null

Access problem to FTP site

Similar Messages

Maybe you are looking for