Access Restrictions

I just upgraded my firmware for my router to the lates and my access restictions no longer function like they did under my old firmware (wrt54g v2.2)
currently I have my access restrictions set up like this
1 allow ip:100 24/7
2 allow ip:101 24/7 with keyword restrictions and web sites blocked
3 allow ip:101 24/7 with keyword restrictions and web sites blocked
problem is ip:101 cannot connect to any website even those who donot match keywords or specificly blocked websites
so I tried:
1 allow ip:100 24/7
2 allow ip:101 24/7
3 allow ip:101 24/7 with keyword restrictions and web sites blocked
4 allow ip:101 24/7 with keyword restrictions and web sites blocked
ip:101 now has full unresrticted access
so I tried:
1 disabled
2 disabled
3 allow ip:101 24/7 with keyword restrictions and web sites blocked
4 allow ip:101 24/7 with keyword restrictions and web sites blocked
both 100/101 cannot connect
I set up the restrictions the way I was told to ... premissions before denys... I can't figure out why it's not working or how to get the access resctictions to work properly again... and of course I cant seem to get my old firmware back....so how do I set my access restrictions so ip 100 has full access and ip 101 is restricted from the websites I want and the keywords?

What is going on and why is Linksys not fixing this problem?? I was told to buy the WRT54GL model and that everything would be great with Access Restrictions. But much to my disappointment, it is the same problem as my other model. It actually worked when I first powered up the Router and entered the restriction (I am doing a VERY simple restriction of myspace.com) but after about an hour or so, the whole access restriction thing seemed to be ignored, no matter how many times I deleted the rule and re-entered it. Why can't they fix this!!!???

Similar Messages

WRT54G2 and WRT54G locks-up (freezes) when blocking web sites using Access Restrictions

I am convinced that a few Linksys routers such as WRT54G2 and WRT54G have a major issue when blocking web sites using Access Restrictions (Internet Access Policy). After a few hours of internet access by 15 wired users the Linksys locks-up and blocks all internet web access. The only solution is to restart the power on the router.
We are currently using a Linksys WRT54G2 v1 (firmware 1.0.04). We upgraded the WRT54G2 v1 firmware to the latest 1.0.04 version which did not resolve the issue. NOTE: We were previosuly using a a Linksys WRT54G v1.1 (firmware 4.21.1) until the power supply blew a week after we started blocking web sites using Access Restrictions (Internet Access Policy).
Basically, we have a T1 internet connection and a hub connected to the Linksys router. We are trying to block several web sites such as facebook, myspace, etc. for 15 wired users. We do not use wireless connections.
This is the 2nd time it happened with 2 different models.
Please help ASAP.
Thank you,
Lance
(Mod note: Edited post. Some parts off topic.. Thanks!)

Also, you have already upgrade/re-flash the firmware of your Linksys Router you need to reset and reconfigure your router from scratch. Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

How to configure CLI/DNIS based access restriction in 5.3 ?

Hi,
does anybody have an idea how the setting
define CLI/DNIS-based access restrictions which is defined in ACS v. 4.2
can be configured in acs 5.3 ?
in v. 4 for every user in a group with 40 members a different CLI is defined for each. How can I configure that in version 5.3 ?
any help as always much appreciated!

The equivalebt to NAR functionality can be found at:
Policy Elements > Session Conditions > Network Conditions > End Station Filters
Can then define an object with a set of CLI values
These objects can then be used in policy conditions. So can create a condition with a set of CLI values and then match in authorization policy for values that are included in this set and set authorizations accoridngly
Not sure if this is your use case but hopefully may be a start

Access restrictions timing off by 1 hour

I don't know if anyone else is experiencing this problem. I have set access restrictions on my WRT610N router and they execute an hour earlier than set.
I checked the time zone settings, the system clock and all seem correct. I have a rule that is supposed to turn off access to the Internet at 11:55pm. However, the rule gets executed at 10:55pm.
This was happening on my first WRT610N which was also dropping network connections. So, I returned that unit and got a replacement.
The new unit does not drop connections but has the same timing problem. The only solution I have found is to change the time zone to the next one that is 1 hour behind my time zone.
Please let me know if anyone else has experienced this same situation.

My ISP is on the same town as I am. The information they are supplying appears to be correct as my WRT54G uses the same information and its rules execute properly.
I think there is a problem with the WRT610N. My solution is temporary I hope that Linksys will fix this problem.

WRTU54G-TM Slow Setup Page and HTML Error on Access Restrictions Page

I have a WRTU54G-TM Wireless Router. It has v1.00.21 firmware and I have done a reset with no solution. Everything seems to work, except the setup pages load very, very, very slow. Also in Internet explorer I get an HTML error on the access restrictions page. Resets don't help. The router did not have this issue until about a month ago that I recall. I can see on the access restrictions page the gray shading is all lined up except at the bottom on the page, like ther is some sort of issue in the html within the router.
One more problem, after I reset the router the saved config file I made would not change the default settings back, I had an older saved config file also, it would not work either.
Is this an issue with this firmware version? Any one else see this?
Message Edited by johnsonle9 on 01-24-2010 01:24 PM
Message Edited by johnsonle9 on 01-24-2010 01:24 PM

Are you getting the same problem with another computer...?
Try using different computer and check if you are getting the same problem or not...If yes then,I would suggest you to re-flash/upgrade the router's firmware,reset the router and re-configure it from scratch..Do not use the save config file.

Access Restrictions bug of firmware 1.01.1 for WRT54G V5 V6

I am using WRT54G V5.
The Access Restrictions function won't work properly when using firmwares 1.01.1 and 1.01.0. Ports can't be blocked by using the "Blocked Services" in this function.
Now I have to switch back to 1.00.9 to make the port blocking work, but there is a DHCP server issue which could only be fixed in 1.01.0 or above.... Could someone fix this BIG BUG and roll out a new firmware????
Thanks a bunch.
Message Edited by Dennis_Hsu on 01-08-200705:02 PM

What is your Fragmentation and RTS threshold value? I'm not sure if I'm reading your message right, but it says as far as I can understand 30. The value should be 2304 instead for both.
Ty changing the wireless channel also to either 1, 6 or 11.

Access restriction error? not sure how to fix it....

I am trying to use JPEGImageEncoder and i imported import com.sun.image.codec.jpeg.*; fine but i get the following error on my code:
CODE:
JPEGImageEncoder encoder =JPEGCodec.createJPEGEncoder(outImage);
ERROR:
Access restriction: The type JPEGImageEncoder is not accessible due to restriction on required library /usr/local/java/jdk1.6.0_07/jre/lib/rt.jar
I am not sure how to fix this... anyone know what needs to be done? I am using eclipse and i see the rt.jar in my library....
thanks!

MikeTheBorg wrote:
OK, I agree it's simpler for simple cases, but how do I do something like this:
          JPEGImageEncoder jie = JPEGCodec.createJPEGEncoder(os);
          JPEGEncodeParam jep = jie.getDefaultJPEGEncodeParam(bi);
          jep.setDensityUnit(JPEGEncodeParam.DENSITY_UNIT_DOTS_INCH);
          jep.setXDensity(1200);
          jep.setYDensity(1200);
          jep.setQuality(1, false);
          jie.setJPEGEncodeParam(jep);
          jie.encode(bi);
using ImageIO?
"Stupid" Eclipse+Maven refuse to compile this legacy code.It's an Eclipse error, not a Java/compiler error as such. To fix it, I believe you have to check your plug-in configuration -- imported packages here or exported packages there. Try adding "com.sun.image.codec.jpeg" to the imported packages. Something along those lines. Anyway, bottom line: this is not an issue with the code.
Furthermore, lookee here: GIAD

WRT160Nv3 problem with blocking traffic using Access Restrictions

Hi.
I want something quite simple. Block Youtube. I go into "Access Restrictions", choose a name for policy 1, enable it, choose the pc from the pc list, but then...
if a click Deny, all other options will be disabled (greyed out, can't click nor write on them).
Therefore, I can't put the urls I want (youtube).
I tried writing the url with "allow" and then change it to "deny" but it will block ALL traffic.
No good.
So, how do I make a new policy just to block this one URL?
Is it normal that when I click and choose "Deny" everything gets disabled afterwards?
Thanks in advance.
Regards,
Leo
Solved!
Go to Solution.

for internet access policy DENY means to restrict internet access during specified days and hours. this will block ALL internet traffic for the said schedule. website blocking by URL, blocking by means of keyword and blocking applications would then be NOT AVAILABLE as the computers would not have internet access to begin with if you have such a policy disabled.
for your case, you may want to try to set restriction to ALLOW internet access then specify youtube.com under Website Blocking by URL. this would allow computers to have access to the internet all the time (if you have the schedule set to EVERYDAY) or during specific days and hours but NOT have access to youtube.

Create access restriction in designer using script

Hello,
I am looking for a way to automate the creation of access restriction within universe.
I looked in the API universe reference and it seems that there is no entries for such an object
For information I use Business Objects XIR2 with SP3
Thanks for any help or answer

Creation/Modification of Universe Access Restrictions is not part of the Universe Designer SDK, but part of the BusinessObjects Enterprise SDK.
It requires sending requests to the CMS using the SDK to get User and UserGroup information.
For the COM-based version of the Enterprise SDK, the object is known as Overload, and described here:
[http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/en/BOE_SDK/boesdk_com_doc/doc/boesdk_com_doc/CrystalEnterpriseOverloadPluginLibrary.html#1351377]
Sincerely,
Ted Ueda

Access restriction in Universe

Hi All,
In our environment we have 2 domain (US and Europe) and most of the user have id created for both the domain. We have 2 identical databases one in US and other in Europe. US database holds US information and Europe holds Europe data.
In our BO environment we have set the ad groups to create new id for each user Alias i.e if the user abcd has access in both US and Europe domain BO creates 2 separate ids for each domain (bo internally creates abcd and abcd0). We have only one universe and set of reports which has connection switching based on the domain user logs into BO (access restriction at connection level). This works absolutely fine, switches database connection depending on the domain user logs in.
Now we are hearing from our users that they can access the personal reports created under Europe login in US login (this because users has abcd and abcd0). So we decided to create enterprise id and alias the users from AD group (abcd --> alias AD abcd), if we do this the change the connection swap is not happening as the BOUSER always returns abcd as user and universe restriction is only picking the default connection.
Thanks
Srinivas

Hi,
As you have mentioned in the post that OS is solaris. so for Solaris LAFix has been released by PG for this issue.Below are the details:
VERSION:     XIR3.0 LAFix0.18
PLATFORMS:       Solaris Solaris 10
LANGUAGES:       English
ADAPT ID:      ADAPT01099598
Synopsis:     Universe connection override does not work u2013 Error WIS 10901
WARNING: This LAFix has not been through a full regression test cycle but it has been deemed to fix the problem reported by the customer. Inadvertent introduction of an unforeseen issue can however not be fully excluded. Before providing this LAFix to the customer, Customer Assurance must perform their own tests to confirm customer issue is solved.
ADDITIONAL INFORMATION
       Installation Instructions :
1.     Stop all BO Enterprise services, e.g <BOE_DIR>/bobje/stopservers
2.     Gunzip and Untar XI3.0_RHEL_LAFix0.18.tar.gz
3.     Change directory to <EXTRACTED_LOCATION>/LAFix0.13/DISK_1
4.     Run install.sh
5.     Re-start all BOE services, e.g ./startservers
       Uninstall Instructions :
2. Run uninstallpatch.sh from your system.
     New Behavior :
            The above issue is now resolved.
     Limitations :
            No known limitations
     Component(s):
      libuum.so
Note: LAFix is released on top of XI 3.0
To download the or get the LAFix you need to contact to your Sales Account Manager of BusinessObjects.
Cheers,
Deepti Bajpai

Session and Access Restriction

Hi:
I have this problem with access restriction. I was trying to build a "secure" site with sessions where users are able to login and access secure webpages upon successful login. And these webpages are not available as soon as the user session expires or terminated. However, from time to time, these web pages are still accessible after logging out by pressing "back" button on the browser or book-marking these pages.
I noticed that Hotmail and old Yahoo mail system have the same problem as the one that I have just described.
I am not using https or virtual host or anythind like that, because I didn't have the resource. It is supposed to be a Basic Authentication (login/password) scheme.
Could any one light me some fresh ideas?
Thanks
Tian Lei Xia ":)

To avoid the bookmarking problem, set a session attribute with the login details.
Once they login:
if(request.getParameter("username")!=null)
     session.setAttribute("username","personA");
if(session.getAttribute("username")==null)
     //don't display the page
else
     //show them the pageThis is a very basic technique and there are other ways of doing this. As for logging out then the session should just be invalidated.
An alternative would be to use the security features of the web deployment descriptor and get the web container to handle the sessions for you (See servlet API specs 2.3 for more details).
Good luck,
Anthony

Problem with access restriction

I have about 50 to 80 users under my internet connection and i used the router 2500 and make there repeater of the single connection but i want to restrict many of the user on interner and some on timely but is not possible with this version of product, what can i do house, or what software do you suggest for me to use with this to restrict the internet access on this network.
Again, i try to use switch sf100-24 becos of the numbers of the cable to use that is more than 4 as we have only 4 port on the router for ethernet but if i connect it after few second it will make all the connection saying 'unidentify network' and it will not function again what can i do to solve this problem too please!!! help me house

Hi, you might perhaps consider getting a gigabit switch in order for those devices to be able to work with access restriction.

Access Restriction tab is missing on e3000 web interface

I am quite sure that this tab has been there before but now its missing - could it be because I have activated Parent Control on Cisco Connect ?
If so - how do I 'get It back'
(I thing parent control in Cisco connect is too limited)
Regards
Fleohans
Solved!
Go to Solution.

Yes, the Access Restrictions tab goes away when the Parental Controls section is activated. According to the faqs, a hard reset is the only way to restore it.

Access Restrictions again...

Ok so I cant get the access restrictions to work. I input the mac addy of the pc i want to restrict and no matter what times I put in the pc can still acess the net. In other words, I can restrict it to 24/7 no access and it still wont work.
Anyone able to get this to work? Im using WRT54GL v4.30.5

I think i figured it out. You have to have the firewall enabled for it to work (duh) so far it seems to be working now.

Access Restrictions for Time?

I keep trying to set access restrictions for my wrt54g router for time. There is no 12 for time so I'm selecting 11:55 pm to 6am but I keep getting an error message of, "end time must be bigger then begin time." I get this no matter if I select 9pm, 10pm, etc.........
Any ideas?

You cannot choose a time frame through midnight. You have to split it in two rules, one before midnight and one after, i.e. choose 12am to 6am and 9pm to 11:55 pm.

"access restrictions" did not work sometimes when using 3-tier DeskI.

My customer found that "access restrictions" did not work sometimes when using 3-tier DeskI.
But this issue can be solved by logging on from another machine, or restarting the DeskI.
For I can reproduce this issue, so I just want to know that:
1.What is it probably related to?
2.If this issue happens again, what can I suggest my customer for tracking it?
For example, get some log files from servers etc.
Thanks!

Hi Sarah,
Also you can try the following solution.
1. Import the universe.
2. Go to manage access restrictions
3. Remove the restriction .
4. Again create the rescrition and unchecked the " limit size of result set to"
5. Now assign it to the unlimited results group ( this is the name of
the group we have given to those users who should be able to retrieve
more than X rows)
6. Now we save the universe. (Dont export the universe).
I hope this will help you.
Regards,
Sarbhjeet Kaur

Access Restrictions

Similar Messages

Maybe you are looking for