Access Scope Warning When Adjusting Mandatory Override Settings?

Hi all,
In my opinion, the access scope warning dialog should not appear when the user modifies mandatory override settings.
Under "Class Properties" for a .lvclass
Under "Item Settings"
When modifying the settings of a dynamic dispatch VI
If the user modifies one of the two checkboxes pertaining to mandatory override...
Regardless of whether the access scope actually changes, a warning dialog appears, and selecting "Yes" seems to cause the IDE to mark unsaved changes for other classes in the class hierarchy chain. The warning dialog should not appear when all the user does is set the state of the two checkboxes, and to me it doesn't make sense that all of the other classes now have to be saved. (I claim some ignorance on the saving part, though - it's just my intuition.)
Does this make sense?
Thanks,
Mr. Jim

This was consciously discussed when the dialog was added. We decided that it should appear. You may choose "no", but the option should be there. By setting the must override setting all the way down the tree, we felt we and our users would be less likely to introduce mistakes when refactoring to add or remove parent classes. There were times when this seemed like a good idea and so worth offering the option to automatically do it.

Similar Messages

Aperture crashes when adjusting print settings.

Hello,
Macbook Pro OSX 10.4.11
Aperture 1.5.6
ATI Graphics Card
I've had Aperture crash on me about 6 times today. Each time I am adjusting my print settings. Very frustrating. Within the last 48 hrs. Aperture has lost a handful of images. They were there one minute, the next they were gone. Now it's crashing when I'm adjusting print settings.
Also... probably shouldn't post this here but... My computer shuts down when running on less than 33% battery power. Just shuts itself right down... no warning, nothing.
Any help... HUGELY appreciated.

Did you ever figure this out? My MBP is doing the same thing. I'm trying to print contact sheets. I can configure the images for the sheet, but the "Printer" box show "No printer selected" and I cannot click on the text to add or type in a printer.
Below it, the "Print Settings" button is active, but clicking on it crashes Aperture within 3 or four seconds.
I think this must be an Aperture problem as I can print from PS and from the various Nikon programs I have.

When i drag and drop an image on my site. it gives the following error. "Unable to access local files due to browser security settings. To overcome this, follo"

I am using the firefox version 17 and when i drag and drop an image on my website. It gives me the following error.
Unable to access local files due to browser security settings. To overcome this, follow these steps: (1) Enter "about:config" in the URL field; (2) Right click and select New->Boolean; (3) Enter "signed.applets.codebase_principal_support" (without the quotes) as a new preference name; (4) Click OK and try loading the file again. Or go to the homepage for a link to the tutorial on how to do it.
I have completed the above steps and it is still showing the same error message. Any help would be highly appreciated.
Thanks.

Thanks kumars ,
I have a specific drag and drop area on our website. This works fine for all earlier releases of Firefox after these security settings
"(1) Enter "about:config" in the URL field; (2) Right click and select New->Boolean; (3) Enter "signed.applets.codebase_principal_support" (without the quotes) as a new preference name; (4) Click OK and try loading the file again."
Bust these settings not work for me in Firefox 17.
Yes the drag and drop functionality is java script based and i am not using any script blocker addons.

HT1694 My hotmail access disappeared from my iPad. When I go to settings and click 'mail, contacts, calendars' the page freezes. It doesn't allow me to the account setting. Anyone have suggestions?

My hotmail access disappeared from my iPad. When I go to settings and click 'mail, contacts, calendars' the page freezes. It doesn't allow me to the account setting. Anyone have suggestions?

Your Settings app is crashing. Sometimes, the only way to fix this is by restoring the iOS software but hopefully it will not come to that.
1. Quit the app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
2. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
3. You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.

Access 2010 warn "System Resources Exceeded" when change machine

My Access file has 1.2GB and need to run a lot of simple Update SQLs. The program run well on my old PC.
I recently change the PC from Core 2 Due to I5-4570S. The Access
warn "System Resources Exceeded" when running. I use the old PC to run and it is ok.
My old PC is E7500 2 GB ram, Win 7 (64bit) + Office 2010 (64bit). New PC is I5-4570S with 8GB ram, with same OS and Office. Why the system resources would exceeded on my new machine?
I searched many websites for this and cannot find a well solution. Does anyone know how to solve it?
I have posted this question on Access 2010 help forum before, please refer to:
http://social.msdn.microsoft.com/Forums/office/en-US/60810447-2f18-452e-b752-c23bda4a67aa/access-2010-warn-system-resources-exceeded-when-change-machine?forum=accessdev

I don't use ODBC. I use ADO with ACE connection string to connect database.
The Access version of new pc is newer than my old pc already.
I tried in different PCs with different setting and found that in 2GB ram, the program is stable. If 4GB or above, the error appeared.
The error does not appear at the same command all the time. It may not appear sometimes. If I try to compact the database and re-run the command, it may pass, but not always.

HT1695 I can not access Wi-Fi on my iPhone 4s. When I go to settings Wi-Fi the applications reads "No Wi-Fi". Other people can access the Wi-Fi on their phones and I have tried this in several different locations. Any suggestions?

I can not connect to wi-fi on my 4s. I bought the phone while on vacation in Seattle about a week ago in seattle and it worked fine. When I got back to Ohio I was not abe to pick up a wi-fi signal. Other people standing right next to me have picked up a signal. When I go to settings>Wi-fi the window is grey and reads "No Wi-Fi". Any suggestions?

I have a similar problem. When i upgrade the last os6 software the wifi box now is always in grey color and i cannot switched on to connect wifi. I have been trying different ways to solve this problems including a "reset all settings" and "reset network setting" but nothing happens.
Do you have any idea abt this problem which started on os6 upgrade.?
Brgds
Claudio A.

Firefox does not show numbers in arabic format when the windows regional settings is set to arabic, instead it shows numbers in latin characters

when switching windows regional settings to Arabic, numbers are still shown in Latin characters, unlike other browsers (ex IE).
== This happened ==
Every time Firefox opened
== all firefox versions

See "bidi.numeral" in http://kb.mozillazine.org/About:config_entries#Bidi.
See also http://mxr.mozilla.org/mozilla1.9.2/source/modules/libpref/src/init/all.js#1058
To open the ''about:config'' page, type '''about:config''' in the location (address) bar and press the Enter key, just like you type the url of a website to open a website.
If you see a warning then you can confirm that you want to access that page.

What is the best solution when dealing with user settings

We have a webapp, when a user logs in, all the user en application settings are read (only once) from the database and stored in a session bean (for quick access).
But when some application setting is changed, I want to tell all the session beans that they need to reload the settings.
Is there a good solution for this?
Thanks in advance.

There are several ways to do this:
1) Put a timestamp on the application settings tables whenever they are changed. At the beginning of each request, send a small query just for this timestamp and compare it to a timestamp for when the session was created. If it is newer then the session then force a full refresh of the session data, otherwise keep using pre-loaded session data. This keeps normal operation quick since the SQL needed for the intial test is simple and quick, but will get the user the new information they need when they need it.
2) Collect your sessions into an external collection stored inside application scope. Have a trigger that when the application settings change, the session objects are iterated through and updated. This way the settings may be updated without the user making a request - and the updates may be time-invisible to the user. But you could get into situations where you are updating settings at the same time you are reading settings, so you will need to synchronize your access.
3) Don't put application settings in the session. The session should be for user settings only. The application scope (Servlet Context) should be used to store the application settings. As such, when application level changes to the DB are made, the application-level object is reloaded. You only have one copy in memory, it updates just once, no need to iterate through sessions, and users who use the application settings are using the most recent copy.

BO 4.0 LCM - Using the Override Settings Option

I am reading the LCM user manual and I am wondering:
What is meaning of Using the Override Settings Option?
I need to use LCM to move WebI reports and Universes from one environment to another
and from one environment to a LCMBIAR file.

I did everything as advised to apply an override for the universe connection object, even though there is no change in the connection settings from QA to PROD, I still get this during Test Promote:
Resolution Status=Copied, Dependency Status=All the required dependencies are included., Commit Status=Commit is successful., Promotion Status=Warning : Can't apply override; Override information is Not Available
When I do the actual promotion, the job fails for the connection object citing override issues. I don't know what's going on with LCM but is there any way to no be forced to use the override feature?
Thanks!

Message: Your Web browser must accept cookies in order for you to send your data. Please adjust your browser settings to enable this site to store cookies.

Hello! I have two questions.
(1) I want to submit a question through www.tune-up.com but the website does not accept my inquiry.
I get the following message: "Your Web browser must accept cookies in order for you to send your data. Please adjust your browser settings to enable this site to store cookies and access this site again."
I checked my cookie settings, and it looks like I have the Firefox default settings (i.e. cookies are accepted). Tried to submit my inquiry again but it does not work. Please advise how to make sure I can submit inquiries etc.
(2) I want to start using the Google search again but not sure how do change the settings. I do not want to have DuckDuck Go as my default. Would you please describe how to change back to Google? Also, is the problem I described above perhaps related to the DuckDuckGo search engine I use?
I look forward to your assistance which is greatly appreciated - Thank you!

On #1, you can check the site-specific cookie setting using the Permissions panel of the Page Info dialog. When you are on the page, you can open that dialog using either:
* right-click the page > View Page Info > Permissions
* click the padlock or globe icon in the address bar > More Information > Permissions
Skim or scroll down to "Set Cookies" to make sure it is not set to Block.
If that is okay, some other random thoughts:
* Are you using the site in a private browsing window?
* Do you recall disabling DOM storage, which sites sometimes use instead of cookies to store large blobs of data (Firefox controls access to DOM storage using your cookie setting for the site)?
On #2, your default search engine should not have changed. To change it to Google, you can use the icon on the left end of the search bar (the classic small search box that appears on the toolbar). Please see: [[Search bar - add, change and manage search engines on Firefox]].
I don't think there is any connection between #2 and #1.

Firefox 25.0.1 Warn when closing multiple tabs (on) conflicts with "show windows und tabs from last time" (on); need both, but only one or the other works.

Using Firefox 25.0.1 on Windows 7 Home Premium
I've poured through support forums for Mozilla Firefox searching for a fix to my initial problem of the "Warn when closing multiple tabs" pop up not popping up when I have it selected.
Went through About:Config, making sure warnings for tabs und closing, und showing on quit, und quitting, etc. were all set to true, which were "possible" fixes for the issue I was having, there are like five or six things set to true for warnings/quitting/etc. No avail. They are all set to true.
Then I stumbled across one that suggested a conflict with the "Warn When Closing Multiple Tabs" und the "Show Windows und Tabs from last time".
I use both features. However, I found if I want the warning pop up for closing multiple tabs, I have to have "show homepage" or "show blank page" selected instead of "Show windows und tabs from last time" selected. (Tools>Options>General>Start Up>When Firefox Starts:) The problem with this is, yes, I get my warning pop up, BUT, I don't get my tabs from my last session.
The warning in settings (Tools>Options>Tabs>Warn Me When Closing Multiple Tabs) is checked.
To have my tabs restored from last session, I simply select it for "when firefox starts". Bam, I have my tabs that were open from the last time I quit. Und again, full circle, I don't have my warning pop up.
There were also suggestions of the warning on close for tabs is conflicting with add-ons.
However, I don't have many. Und I have yet to test them to see if they interfere. These are according to my Add Ons tab when I check it myself.
Extensions:
1. Avast WebRep (disabled)
2. HP Smart Web Printing (disabled)
Plugins:
1. Adobe Acrobat
2. Google Update
3. iTunes Application Detector
4. Java (TM) Platform SE 7 U45
5. Shockwave Flash
6. Shockwave For Director
7. Silverlight Plug-In
8. VLC Web Plugin
9. Windows Live Photo Gallery
10. Java Deployment Toolkit (disabled)
Note: The Details Firefox provides says I have these for Plugins
* Shockwave Flash 11.9 r900
* Adobe Shockwave for Director Netscape plug-in, version 12.0.5.146
* Next Generation Java Plug-in 10.45.2 for Mozilla browsers
* Google Update
* Adobe PDF Plug-In For Firefox and Netscape 11.0.05
* VLC media player Web Plugin 2.1.0
* 5.1.20913.0
* iTunes Detector Plug-in
* NPWLPG
Unsure of what the "5.1.20913.0" und the "NPWLPG" plugins are, but they don't appear to me under Add Ons.
Und as usual, I'm assuming the solution lies within About:Config, I will show here now what I have set to True.
browser.tabs.warnOnClose - True
browser.tabs.warnOnCloseOtherTabs - True
browser.tabs.warnOnOpen - True
browser.warnOnQuit - True
browser.showQuitWarning - True
As aforementioned:
The seemingly only issue is the conflict between Show Windows/Tabs From Last Time und the Warn On Quit pop up. Und again, I need/want both of them. More so the tabs from the last session, but I really really really really really want the warning.
So, if anyone knows a work around, preferably without having to download anything to fix this, I would be extremely grateful.

You mention a second subject.
''I'm probably going to downgrade to another version of firefox that was suggested to me since I'm also having issues with shockwave flash causing firefox to hang und ultimately needs to be force closed otherwise having to have flash disabled to use firefox.''
Downgrading Firefox 
Flash is notorious for causing Firefox problems. I suggest you start a new thread about that. If at all possible you should try to avoid downgrading to an unsecure & unsupported version of Firefox. it will increase risks to your system and Personal data. (There are methods of mitigating the risks, using a virtual machine or operating within a secure intranet for instance)
*(Do Not) [[Install an older version of Firefox]]
Try Flash with Protected Mode Off 
Worth a try as it takes minimal effort & often solves Flash Problems whilst allowing current and more secure FlashPlayer to be used. See
* http://kb.mozillazine.org/Flash#Flash_Player_11.3_Protected_Mode_-_Windows
* http://forums.adobe.com/thread/1018071#TemporaryWorkaround
If you wish to pursue these subjects further I note you have already started a thread you may as well continue the discussion in that thread, but also post back here so we can follow both.
* ''Firefox is having "Script" issues (Not Responding) und possibly Flash issues?'' [/questions/978181]
** try ensuring you close down Firefox using the menu, that may even help with Flash problems.
Your experience in submitting troubleshooting information on the forum 
(This is out of curiosity, but with the intention of pressing for changes if forum faults are discovered.)
There are yet more changes to this forum underway. Mozilla recently tried to improve the experience for first time users of the forum and a troubleshooting app option was included in the workflow to try to encourage users to submit full troubleshooting information.
I would be interested to know what you thought
I sometimes wonder if users are not trying to use that, or whether forum users run into problems in using it. At one point I wondered whether there was a problem if too much data was included but never actually proved that conjecture.
Assuming you are using the forum, and not merely replying by email look towards the top in the right hand margin for clickable buttons
* Question Details -V- More System Details -> [Additional System Details]
You will note that includes only partial information. There are no changed prefs or extensions listed. Compare for instance the information in this thread [/questions/978130] with full information.
I believe your mystery plugins are Windows related
* NPWLPG relates usually to Windows Live Photo Gallery
* 5.1.20913.0 will be Silverlight

Cannot add a new email account, and hence icloud account. When i go into Settings - Mail, accounts, calendars, the option to add a new account cannot be clicked (ghosted). I also have iCloud Settings ghosted (unclickable). Cannot change in itunes also.

Cannot add a new email account, and hence i have no way of creating an iCloud account (very frustrating). I had the same problem with iOS 4.3 but i had no email account to create as i set both up when i bought the iPhone 4. After adding a company email and a gmail account (both wok perfectly) i noticed that the option to create more email accounts had been ghosted (unclickable). This didn't worry me at the time. However, iCloud needs me to create one in here so i can access the cloud which i desperately want the ability to do. When i go into Settings -> Mail, accounts, calendars, the option to add a new account cannot be clicked (ghosted). I also have iCloud in the iPhone Settings ghosted (unclickable). I have same problem in itunes on Mac OSX. Surely restoring isn't the solution as i restored my iphone when changing from iOS 4.3 -> 5. Please help?

Go to
Settings,
General,
Restrictions, type in your Restriction Password,
Accounts, tick Allow Changes.
Press the back key a few times till you're back in Settings, you should see iCloud is now highlight able, now go to Mail Contacts and Calenders and add your email account as per norm.
Hope this helps.

TS3899 I had to change my email password so now have to do the same on the ipad. but when I go to settings-mail contacts etc- I can see my accounts but I am unable to do anything with them (they are light gray not regular bold black). now what?

I had to change my email passwod so now have to do the same on the ipad. when I go to settings--mail contacts etc.- I can see my email accounts but I am unable to click on them to change them. they appear light gray instead of bold black. how do I activate them so they are accessable to change the password?

I had to change my email passwod so now have to do the same on the ipad. when I go to settings--mail contacts etc.- I can see my email accounts but I am unable to click on them to change them. they appear light gray instead of bold black. how do I activate them so they are accessable to change the password?

TS5168 Upgraded to OS X 10.9.1 and that has stopped me using iphoto 'yopu can't use this version ofv the application with this version of OS X Yet there was no warning when selecting the upgrade and no guidance offered apple?

No warning when downloading OS X 10.9.1 re the operating system disabling the iphoto programme! Result I now cannot access the photo's has any one else had this and found a solution. eg how to upgrade i photo?
Seem remiss of apple not to warn/ offer a solutio.
I have a time vault from Mac but reluctant to open in case I destroy records!
Thanks
Tony

This graphic shows which previous versions of iPhoto qualify for a free upgrade to iPhoto 9.5.1 from the App Store and which don't:
OT

Access denied error when starting DIAdem from LabVIEW

We are using the DIAdem Connectivity Toolkit in our application. Our application starts a DIAdem session to handle querying and datasheet creation. On a recent installation at a customer, our application was not able to communicate with DIAdem, i.e. we get an Access Denied error when our application tries to start up DIAdem.
The location of the error is in the DIAdem Open Connection.vi. I believe it is when the Automation Open is run.
Is there some system setting that could be blocking communication between the two, i.e. ActiveX setting, etc? If so, where could we control these settings from?

Hello Derrick,
While cBauer is away from the office, I will be working with this case on his behalf. I will try to answer your questions as best I can to determine what might be causing this failure.
1. The error which we encounter is an "Access Denied" error (as stated above). I am currently investigating the error code, and will update this post accordingly when I have it.
2. Our application is a built (.exe) application using LabVIEW 8.5 and DIAdem 10.2
3. We do not install the toolkit directly on the customers machine as this is a built application. We install the FULL LabVIEW 8.5 Runtime engine, as well as a licensed copy of the DIAdem 10.2 Basic edition.
4. The error occurs in run-time environment at a customer site. We have been unable to duplicate the error in development.
5. We're using the "DIAdem Open Connection.vi" from the DIAdem.dll library to initialize the connection (this is the VI which appears to be producing the error via the "Automation Open" node), and we're using the "DIAdem Close Reference.vi" from the same library to close the reference.
6. I will instrument a simple application which performs these tasks and post the results when we have tried this operation.
7. I am unsure whether the repair operation has been attempted. I will verify this behavior and again post the results to this forum.
Thank you for your help. Please let me know if you require additional information. Hopefully we can discover a solution to our problem.
Ken

Access Scope Warning When Adjusting Mandatory Override Settings?

Similar Messages

Maybe you are looking for