Access Violation when trying to read from Open Hub in BW

Hi,
Can someone help me out. I use BODS version 14.1.1.210. I have setup the connection to BW source and imported metadata for my OpenHub - no problem.
Then created DTP and processchain to load Open hub data in BW.
Made dataflow in BODS with Open Hub Tables as source and maintained processchain to be executed. When executing BODS job I get the following error:
6800 10580 JOB 17-03-2014 13:10:34 Job <Test_OpenHub> is terminated due to error <170101>.
6800 10580 SYS-170101 17-03-2014 13:10:34 |Session Test_OpenHub|Data flow Test Openhub
6800 10580 SYS-170101 17-03-2014 13:10:34 System Exception <ACCESS_VIOLATION> occurred. Process dump option is off. Process is not dumped.
6800 10580 SYS-170101 17-03-2014 13:10:34 Call stack:
6800 10580 SYS-170101 17-03-2014 13:10:34 (null)
6800 10580 SYS-170101 17-03-2014 13:10:34 Registers:
6800 10580 SYS-170101 17-03-2014 13:10:34 RAX=00000000747E1648  RBX=0000000000209AB8  RCX=0000000000209AB8  RDX=0000000000000160  RSI=000000000231DAC0
6800 10580 SYS-170101 17-03-2014 13:10:34 RDI=0000000008BEBAC0  RBP=0000000000000000  RSP=00000000002099C0  RIP=000000007477730A  FLG=0000000000010206
6800 10580 SYS-170101 17-03-2014 13:10:34 R8=0000000000000000   R9=00000000FFFFFFFF  R10=0000000000620064  R11=0000000008C93600  R12=000000000033D390
6800 10580 SYS-170101 17-03-2014 13:10:34 R13=0000000081D6FEC0  R14=000000000020A008  R15=000000000020A030
6800 10580 SYS-170101 17-03-2014 13:10:34 Exception code: C0000005 ACCESS_VIOLATION
6800 10580 SYS-170101 17-03-2014 13:10:34 Fault address:  000000007477730A 01:000000000002630A
6800 10580 SYS-170101 17-03-2014 13:10:34 C:\Windows\WinSxS\amd64_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4940_none_88df89932faf0bf6\MSVCP80.dll
6800 10580 SYS-170101 17-03-2014 13:10:34 ==========================================================
6800 10580 SYS-170101 17-03-2014 13:10:34 Collect the following and send to Customer Support:
6800 10580 SYS-170101 17-03-2014 13:10:34 1. Log files(error_*, monitor_*, trace_*) associated with this failed job.
6800 10580 SYS-170101 17-03-2014 13:10:34 2. Exported ATL file of this failed job.
6800 10580 SYS-170101 17-03-2014 13:10:34 3. DDL statements of tables referenced in this failed job.
6800 10580 SYS-170101 17-03-2014 13:10:34 4. Data to populate the tables referenced in the failed job. If not possible, get the last few rows (or sample of them) when
6800 10580 SYS-170101 17-03-2014 13:10:34 the job failed.
6800 10580 SYS-170101 17-03-2014 13:10:34 5. Core dump, if any, generated from this failed job.
6800 10580 SYS-170101 17-03-2014 13:10:34 ==========================================================
Any good ideas?

Hello Erik,
not sure about it, but did you see this post some hours after yours?
DS 4.1 job aborts with Access Violation
Also, did you check ST22 to see if it generates any dump?
And if you're able to check the BODS log files, it might me helpful. They're located at %LINK_DIR%\log directory. Check the names with the execution of the job.
Hope it helps!
Regards.
Bruna Dupim

Similar Messages

  • Photoshop cs4 access denied when trying to install from disc in Windows 7 64bit.

    Photoshop cs4 access denied when trying to install from disc in Windows 7 64bit. I tried it in
    safe mode and it starts to install but get an error there as well.
    What do I do?

    So when you put the disk in it won't run correctly? When the disk is inserted you should have a window pop up with 2 options. 1 to install and the other to see what is on the disk. Choose to explore or open the disk. Go to the CS4 folder where the photoshop .exe file is (that will run the setup), right click on the .exe file and choose run as Admin and it should start. See if it will install. If not then read below.
    I am not sure how far you got in the install before so chances are you will have to run the CS4 cleanup utility. 2 levels to run at but don't use 1 or 2 just type in the number 3.
    http://www.adobe.com/support/contact/cs4clean.html
    You may need to run the windows installer cleanup utility too
    http://support.microsoft.com/kb/290301
    Before you try to reinstall the software ensure that adobe reader is not installed. If it is remove it. It has caused issues in the past with vista and CS4 installs.
    Also turn off windows Defender and any anti-virus software. You can keep UAC on in Windows 7.
    During the CS4 install at 90 percent it will almost stop and may take 5 to 10 mins to finish. This is normal. What a pain huh......
    After install is finished, reboot
    After reboot, go to the CS4 64 bit or 32 bit icon (depends on 32 or 64 bit Windows 7) in start area, right click on CS4 64 bit (if you have windows 7 64 bit) and choose properties, compatibility tab and then check run as Admin at the bottom area. Hit apply, ok to close out.
    Now start CS4 and run the updater.

  • Tftp access violation when trying to jumpstart a SFV120 from a Sol10U7

    Hi, I am trying to build a jumpstart server (boston) for a lab, the machine is a V240 with sol10 U7,
    the /jumpstart is a zfs filesystem exported via sharenfs (confirmed mounted in another machine)
    I am using the JET on the jumpstart server, the make_client succeded for the client (ucrania) but when
    I issue a:
    boot net - install - w
    the client (ucrania) stalls, so in a snoop from the server (boston) I found:
    boston -> ucrania TFTP Error: access violation
    ? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
    ghana.207.153.129.in-addr.arpa -> 224.101.101.101 UDP D=7009 S=7009 LEN=256
    ? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
    paraguay.207.153.129.in-addr.arpa -> 224.101.101.101 UDP D=7009 S=7009 LEN=259
    129.153.207.70 -> 224.101.101.101 UDP D=7009 S=7009 LEN=258
    ? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
    ucrania -> BROADCAST TFTP Read "8199CF7B" (octet)
    ? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
    ? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
    boston -> ucrania TFTP Error: access violation
    ? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
    ? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
    holanda.207.153.129.in-addr.arpa -> (broadcast) ARP C Who is 129.153.207.114,
    holanda.207.153.129.in-addr.arpa ?
    ? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
    ucrania -> BROADCAST TFTP Read "8199CF7B" (octet)
    ? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
    holanda.207.153.129.in-addr.arpa -> 224.101.101.101 UDP D=7009 S=7009 LEN=255
    boston -> ucrania TFTP Error: access violation
    ? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
    boston -> venezuela NFS C 4 (renew ) RENEW CL=774a25508c
    venezuela -> boston NFS R 4 (renew ) NFS4_OK RENEW NFS4_OK
    boston -> venezuela TCP D=2049 S=1022 Ack=3270827737 Seq=3886439810 Le
    n=0 Win=49640
    ? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
    ghana.207.153.129.in-addr.arpa -> 224.101.101.101 UDP D=7009 S=7009 LEN=256
    boston -> NTP.MCAST.NET NTP broadcast [st=3] (2009-06-12 13:11:44.74520)
    ? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
    paraguay.207.153.129.in-addr.arpa -> 224.101.101.101 UDP D=7009 S=7009 LEN=259
    129.153.207.70 -> 224.101.101.101 UDP D=7009 S=7009 LEN=258
    ucrania -> BROADCAST TFTP Read "8199CF7B" (octet)
    ? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
    10.11.14.1 -> BROADCAST RIP R (1 destinations)
    ? -> (multicast) ETHER Type=0000 (LLC/802.3), size = 52 bytes
    boston -> ucrania TFTP Error: access violation
    I presume it is a problem with basic configuration, but cannot find the cause, so, if
    there are any online docs or if there are some test I could/should test, plz point them
    out...
    thanks in advance
    -Oswaldo

    thanks, yes,
    drwxr-xr-x 4 root root 15 Jun 15 12:20 /tftpboot/
    but it seems like the problem is with this machine, maybe its bios/firmware, as I configured another
    machine (x86) without touch anything else (that is, no permissions, or other things other than make_template
    and make_client) and it worked....
    I'll try with another sparc machine ...
    thanks
    -Oswaldo

  • URL stream throws exception when trying to read from input stream

    Hi guys,
    I tried reading from an input stream which returned a 401. Actually, the server side returns 401 whenever the application server cannot fulfill the client's request, however the 401 contains a message which I will like to read.
    I have tried this with mozilla and the return message is properly displayed even at 401. How can I read this message?

    Oracle home is pointing to wrong location.When we made the change to corrent location.Then we rebuilt the jar file started the managed server it is working fine.

  • Error when trying to read from a dictionary

    Hi there, I am trying to retrieve a piece of information using the 'get an item from a dictionary' action.  
    I've set up the action to read from a dictionary which stores information just retrieved using the call http web service action, but now I need an item in that dictionary.  I've parsed through the string returned from the http call and noticed that
    the information I want is under the route 'value/modified' which is what I entered, only without the single quotes...
    but my workflow gets suspended and following is the error message I get:
    RequestorId: 0de36620-da97-6e20-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow instance. Exception details: System.InvalidOperationException: Looking up a value using a key is not supported on an instance
    of 'Microsoft.Activities.Dynamic.DynamicArray'. at Microsoft.Activities.Dynamic.DynamicItem.TryGetValue(String key, DynamicItem& value) at Microsoft.Activities.Dynamic.DynamicValueBuilder.PathSegmentFactory.ObjectPathSegment.Get(DynamicItem obj) at Microsoft.Activities.Dynamic.DynamicValueBuilder.PathSegmentFactory.ObjectPathSegment.Get(DynamicItem
    obj) at Microsoft.Activities.GetDynamicValueProperty`1.Execute(CodeActivityContext context) at System.Activities.CodeActivity`1.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor
    executor, BookmarkManager bookmarkManager, Location resultLocation) Exception from activity GetDynamicValueProperty<String> Sequence Microsoft.SharePoint.WorkflowServices.Activities.AppOnlySequence Then If Project Number Generation Sequence Flowchart
    Sequence New Project.WorkflowXaml_6f5894a5_7f8f_480f_8b7b_6cc37164f328
    I got lost somewhere along the message....but I'm seeing that DynamicValue is not supported??I must be doing something wrong...please let me know what it is...
    the uri I used:
    https://vanguardengineering.sharepoint.com/Lists/getbytitle('Client List')/items?$format=jason&$filter=Title eq [%Current Item:Client%]
    snapshot of my workflow:
    P.S. I realize now that I've posted this question in the wrong discussion board....my apologies and please move me as you see appropriate...
    thank you!
    Fan

    Use a BitTorrent client instead of a ddl (direct download link). This way it's less prone to errors, because it's checked while it's being downloaded.
    Either that, or check its MD5 against the one from the Download page.
    There's also this: https://wiki.archlinux.org/index.php/Be … ion_medium
    Note: The quality of optical drives and the discs themselves varies greatly. Generally, using a slow burn speed is recommended for reliable burns. If you are experiencing unexpected behaviour from the disc, try burning at the lowest speed supported by your burner.
    Last edited by DSpider (2012-11-16 15:13:55)

  • I receive an error message on HP Pavilion Dv6 when trying to read from an sdhc memory card.

    HP Pavilion Dv6 A6y00UA#ABA
    Windows 7 64-bit
    When I insert the memory card, I am presented with the scan disk message asking to scan and fix the "<memory card name> (D"  If I click on "Scan and Fix", select either one check box or both check boxes (doesn't matter) it will scan the card and close out.  When I then try to WRITE a folder to the memory card, doesn't matter which card I try, it sits there for a while thinking and then gives an error:
    "File Too Large: The file '<%1 NULL:NameDest>' is too large for the destination file system."
    If I try to read a photo from a card put there by my camera I get the message:
    You need to format the disk in drive D: before using it.
    or
    Please insert a disk into SDHC (D.
    or
    any number of random errors.
    I've updated the Intel chipset drivers, right clicked and updated the Realtek Card reader drivers using Windows Update.
    HELP!!!

    This forum is about making podcasts. The best place to ask would be in either the iTunes for Windows or iTunes for Mac forum as appropriate.

  • When I try to install Itunes, I get this error: (translated from Norwegian) There was a network error while trying to read from the file: C: \ windows \ installer \ iTunes.msi I have tried many times to reinstall, but nothing helps, please help me.

    When I try to install Itunes, I get this error: (translated from Norwegian) There was a network error while trying to read from the file: C: \ windows \ installer \ iTunes.msi I have tried many times to reinstall, but nothing helps, please help me.

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • I receive a Runtime Error when trying to go from Organizer to Editor. It reads:  Microsoft Visual C   Runtime Error....Runtime Error....Program c:/ (x....

    When trying to go from Organizer to Editor, I receive a Ryntime Error.  It reads: Microsoft Visual C++ Runtime Error.    Runrime Error  Program c:\(x....

    I kept getting the same error message too! Thank goodness I'm not alone in this!

  • Installed an Windows 8.1 update yesterday; Now coputer freezes when trying to print from Adobe Reader.  Can print from MS word

    Installed a Windows 8.1 update yesterday; now computer freezes when trying to print from Adobe Reader XI.  Still can print a word document from MS Word.

    Was already running latest version 11.0.10.  Tried the re-load fix; tried uninstalling and installing a new one from the web.  Problem still exists -- cannot print any document from Adobe Reader XI.  Computer freezes when the print file is being prepared at 0%.
    Jamesk71259086

  • Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY  . Looking for solution.

    Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY  . Looking for solution.

    Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
    First, empty the Trash, if possible.
    Triple-click anywhere in the line below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) 2>&- | wc -l | pbcopy
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign ($) to appear.
    The output of the command will be a number. It's automatically copied to the Clipboard. Please paste it into a reply.
    The Terminal window doesn't show the output. Please don't copy anything from there.

  • Timeout error (Hex 0xBFFF0015) in NI VISA test panel when attempting to read from device

    Hello,
    I am attempting to control the set position of three daisy chained four-way actuator valves. They are VICI Valco and model # EUHA. I have them connected via RS-232 to USB into my computer. I was able to communicate with them when I sent some simple commands through hyperterminal and when I open MAX the devices appear and the panel says the devices are functioning properly. However, when I go into the test panel and try to run some default commands, I get the timeout error, 0xBFFF0015, when reading the command. Thank you for any help you can provide.
    Solved!
    Go to Solution.

    Okay I'm running it again today and I'm noticing that its displaying results when I attempt to read from the valve but still tells me it timed out. Aside from the timeout error, both hyperterminal and visa are providing comparable results. The two commands I have been trying to read from the valves are AM (to check what mode the actuator is set to) and CP (to check what position the valve is at).

  • Access Violation when Printing on Windows NT

    Our users are experiencing problems especially when trying to print from w/in our application which is deployed via JWS. As they print out, they are kicked out of the application and the following dump is generated in a file on their desktop. Any help will be appreciated.
    please send me any details you may want to know in order to help out.
    Thanks,
    # An unexpected error has been detected by HotSpot Virtual Machine:
    # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x77ab69e6, pid=5332, tid=5660
    # Java VM: Java HotSpot(TM) Client VM (1.5.0-b64 mixed mode, sharing)
    # Problematic frame:
    # C [MSCTF.dll+0x69e6]
    --------------- T H R E A D ---------------
    Current thread (0x03a30678): JavaThread "AWT-Windows" daemon [_thread_in_native, id=5660]
    siginfo: ExceptionCode=0xc0000005, reading address 0x00000001
    Registers:
    EAX=0x00000001, EBX=0x001ff930, ECX=0x0425e648, EDX=0x00000002
    ESP=0x0425e5f0, EBP=0x0425e5f4, ESI=0x0425e648, EDI=0x00000000
    EIP=0x77ab69e6, EFLAGS=0x00010202
    Top of Stack: (sp=0x0425e5f0)
    0x0425e5f0: 0011d368 0425e634 77ab77f0 00000001
    0x0425e600: 000d0216 0015fc38 02f80203 77ab6704
    0x0425e610: 0014a420 02f80203 00000000 00000000
    0x0425e620: 77ab67c8 001953a8 04f700fc 00000000
    0x0425e630: 001ff930 0425e654 77ab8e6f 0014aa00
    0x0425e640: 02f80203 00000000 00000001 00000000
    0x0425e650: 00000000 0425e680 77883472 02f80203
    0x0425e660: 00000001 000d0216 02f80203 000d0216
    Instructions: (pc=0x77ab69e6)
    0x77ab69d6: ff 55 8b ec 8b 45 08 85 c0 56 8b f1 89 06 74 06
    0x77ab69e6: 8b 08 50 ff 51 04 8b c6 5e 5d c2 04 00 90 90 90
    Stack: [0x04220000,0x04260000), sp=0x0425e5f0, free space=249k
    Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
    C [MSCTF.dll+0x69e6]
    C [MSCTF.dll+0x77f0]
    C [MSCTF.dll+0x8e6f]
    C [IMM32.DLL+0x3472]
    C [USER32.dll+0x199cd]
    C [USER32.dll+0x18e4c]
    C [USER32.dll+0x18de1]
    C [USER32.dll+0x19132]
    C [USER32.dll+0x21a10]
    C [USER32.dll+0x21ae8]
    C [USER32.dll+0x21c03]
    C [USER32.dll+0x23656]
    C [ntdll.dll+0x60e6e]
    C [COMDLG32.DLL+0x1ba2a]
    C [USER32.dll+0x21a10]
    C [USER32.dll+0xf203]
    C [USER32.dll+0x10c7e]
    C [USER32.dll+0x1123b]
    C [USER32.dll+0x21a10]
    C [USER32.dll+0x21ae8]
    C [USER32.dll+0x2286a]
    C [USER32.dll+0xed81]
    C [USER32.dll+0x1144d]
    C [USER32.dll+0x114a2]
    C [COMDLG32.DLL+0x1b253]
    C [COMDLG32.DLL+0x1b78c]
    C [COMDLG32.DLL+0x1e3e7]
    C [awt.dll+0xd99c0]
    C [USER32.dll+0x21a10]
    C [USER32.dll+0x21ae8]
    C [USER32.dll+0x21c03]
    C [USER32.dll+0x23656]
    C [ntdll.dll+0x60e6e]
    C [USER32.dll+0x1c5cd]
    Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
    j sun.awt.windows.WToolkit.eventLoop()V+0
    j sun.awt.windows.WToolkit.run()V+69
    j java.lang.Thread.run()V+11
    v ~StubRoutines::call_stub
    --------------- P R O C E S S ---------------
    Java Threads: ( => current thread )
    0x03a70438 JavaThread "Thread-19" [_thread_in_native, id=4112]
    0x03a6f980 JavaThread "AWT-EventQueue-2" [_thread_in_native, id=2188]
    0x03a6f7f8 JavaThread "AWT-Shutdown" [_thread_blocked, id=5668]
    0x03a6fb08 JavaThread "TimerQueue" daemon [_thread_blocked, id=5656]
    0x03a44ad0 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=5636]
    0x000bfd68 JavaThread "DestroyJavaVM" [_thread_blocked, id=2208]
    0x03a4ee28 JavaThread "traceMsgQueueThread" [_thread_blocked, id=4064]
    =>0x03a30678 JavaThread "AWT-Windows" daemon [_thread_in_native, id=5660]
    0x00a21d10 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=4764]
    0x00a21ff0 JavaThread "CompilerThread0" daemon [_thread_blocked, id=5372]
    0x00a21338 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=2704]
    0x00a1c560 JavaThread "Finalizer" daemon [_thread_blocked, id=4932]
    0x00a1af38 JavaThread "Reference Handler" daemon [_thread_blocked, id=5644]
    Other Threads:
    0x00a18750 VMThread [id=5648]
    0x00971480 WatcherThread [id=1872]
    VM state:not at safepoint (normal execution)
    VM Mutex/Monitor currently owned by a thread: None
    Heap
    def new generation total 1152K, used 680K [0x233a0000, 0x234d0000, 0x23880000)
    eden space 1088K, 56% used [0x233a0000, 0x2343a3b8, 0x234b0000)
    from space 64K, 100% used [0x234c0000, 0x234d0000, 0x234d0000)
    to space 64K, 0% used [0x234b0000, 0x234b0000, 0x234c0000)
    tenured generation total 14008K, used 13161K [0x23880000, 0x2462e000, 0x273a0000)
    the space 14008K, 93% used [0x23880000, 0x2455a638, 0x2455a800, 0x2462e000)
    compacting perm gen total 8192K, used 3976K [0x273a0000, 0x27ba0000, 0x2b3a0000)
    the space 8192K, 48% used [0x273a0000, 0x27782110, 0x27782200, 0x27ba0000)
    ro space 8192K, 62% used [0x2b3a0000, 0x2b8a7160, 0x2b8a7200, 0x2bba0000)
    rw space 12288K, 46% used [0x2bba0000, 0x2c12c1c0, 0x2c12c200, 0x2c7a0000)
    Dynamic libraries:
    0x00400000 - 0x0040c000 C:\Program Files\Java\jre1.5.0\bin\javaw.exe
    0x77d00000 - 0x77e1e000 C:\Windows\system32\ntdll.dll
    0x77e60000 - 0x77f38000 C:\Windows\system32\kernel32.dll
    0x778a0000 - 0x7795f000 C:\Windows\system32\ADVAPI32.dll
    0x777b0000 - 0x77873000 C:\Windows\system32\RPCRT4.dll
    0x77710000 - 0x777ae000 C:\Windows\system32\USER32.dll
    0x77b80000 - 0x77bcb000 C:\Windows\system32\GDI32.dll
    0x775e0000 - 0x7768a000 C:\Windows\system32\MSVCRT.dll
    0x71410000 - 0x7142e000 C:\Windows\system32\ShimEng.dll
    0x763b0000 - 0x763dc000 C:\Windows\system32\apphelp.dll
    0x731a0000 - 0x73227000 C:\Windows\AppPatch\AcLayers.DLL
    0x765c0000 - 0x7708e000 C:\Windows\system32\SHELL32.dll
    0x77120000 - 0x77175000 C:\Windows\system32\SHLWAPI.dll
    0x77320000 - 0x77464000 C:\Windows\system32\ole32.dll
    0x77550000 - 0x775dc000 C:\Windows\system32\OLEAUT32.dll
    0x76560000 - 0x7657e000 C:\Windows\system32\USERENV.dll
    0x76540000 - 0x76554000 C:\Windows\system32\Secur32.dll
    0x732f0000 - 0x73331000 C:\Windows\system32\WINSPOOL.DRV
    0x76000000 - 0x76014000 C:\Windows\system32\MPR.dll
    0x77880000 - 0x7789e000 C:\Windows\system32\IMM32.DLL
    0x77ab0000 - 0x77b77000 C:\Windows\system32\MSCTF.dll
    0x77540000 - 0x77549000 C:\Windows\system32\LPK.DLL
    0x779b0000 - 0x77a2d000 C:\Windows\system32\USP10.dll
    0x75360000 - 0x754f4000 C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.6000.16386_none_5d07289e07e1d100\comctl32.dll
    0x6d640000 - 0x6d7c5000 C:\Program Files\Java\jre1.5.0\bin\client\jvm.dll
    0x750f0000 - 0x75123000 C:\Windows\system32\WINMM.dll
    0x750b0000 - 0x750e8000 C:\Windows\system32\OLEACC.dll
    0x6d280000 - 0x6d288000 C:\Program Files\Java\jre1.5.0\bin\hpi.dll
    0x765b0000 - 0x765b7000 C:\Windows\system32\PSAPI.DLL
    0x6d610000 - 0x6d61c000 C:\Program Files\Java\jre1.5.0\bin\verify.dll
    0x6d300000 - 0x6d31d000 C:\Program Files\Java\jre1.5.0\bin\java.dll
    0x6d630000 - 0x6d63f000 C:\Program Files\Java\jre1.5.0\bin\zip.dll
    0x6d000000 - 0x6d166000 C:\Program Files\Java\jre1.5.0\bin\awt.dll
    0x75660000 - 0x7569f000 C:\Windows\system32\uxtheme.dll
    0x03cb0000 - 0x03d96000 C:\Windows\system32\ddraw.dll
    0x6f490000 - 0x6f496000 C:\Windows\system32\DCIMAN32.dll
    0x77190000 - 0x77318000 C:\Windows\system32\SETUPAPI.dll
    0x744a0000 - 0x744ac000 C:\Windows\system32\dwmapi.dll
    0x75930000 - 0x75951000 C:\Windows\system32\NTMARTA.DLL
    0x77960000 - 0x779a9000 C:\Windows\system32\WLDAP32.dll
    0x77690000 - 0x776bd000 C:\Windows\system32\WS2_32.dll
    0x77e20000 - 0x77e26000 C:\Windows\system32\NSI.dll
    0x760b0000 - 0x760c1000 C:\Windows\system32\SAMLIB.dll
    0x6bbe0000 - 0x6bee1000 C:\Windows\system32\VTGUModeDX32.dll
    0x6cee0000 - 0x6cfac000 C:\Windows\system32\D3DIM700.DLL
    0x6d1f0000 - 0x6d203000 C:\Program Files\Java\jre1.5.0\bin\deploy.dll
    0x77470000 - 0x7753f000 C:\Windows\system32\WININET.dll
    0x77180000 - 0x77183000 C:\Windows\system32\Normaliz.dll
    0x776c0000 - 0x77705000 C:\Windows\system32\iertutil.dll
    0x77bd0000 - 0x77cf4000 C:\Windows\system32\urlmon.dll
    0x75f00000 - 0x75ff1000 C:\Windows\system32\CRYPT32.dll
    0x76020000 - 0x76032000 C:\Windows\system32\MSASN1.dll
    0x6d5d0000 - 0x6d5ed000 C:\Program Files\Java\jre1.5.0\bin\RegUtils.dll
    0x75c90000 - 0x75c98000 C:\Windows\system32\VERSION.dll
    0x73bf0000 - 0x73df4000 C:\Windows\system32\msi.dll
    0x75520000 - 0x75567000 C:\Windows\system32\RASAPI32.dll
    0x75500000 - 0x75514000 C:\Windows\system32\rasman.dll
    0x76280000 - 0x762ea000 C:\Windows\system32\NETAPI32.dll
    0x75130000 - 0x75161000 C:\Windows\system32\TAPI32.dll
    0x75740000 - 0x7574c000 C:\Windows\system32\rtutils.dll
    0x71a20000 - 0x71a26000 C:\Windows\system32\sensapi.dll
    0x75d30000 - 0x75d37000 C:\Windows\system32\credssp.dll
    0x75a20000 - 0x75a65000 C:\Windows\system32\schannel.dll
    0x6d4c0000 - 0x6d4d3000 C:\Program Files\Java\jre1.5.0\bin\net.dll
    0x75c20000 - 0x75c5b000 C:\Windows\system32\mswsock.dll
    0x75c80000 - 0x75c86000 C:\Windows\System32\wship6.dll
    0x6d240000 - 0x6d27d000 C:\Program Files\Java\jre1.5.0\bin\fontmanager.dll
    0x75090000 - 0x7509f000 C:\Windows\system32\NLAapi.dll
    0x75e60000 - 0x75e79000 C:\Windows\system32\IPHLPAPI.DLL
    0x75e20000 - 0x75e55000 C:\Windows\system32\dhcpcsvc.DLL
    0x76060000 - 0x7608b000 C:\Windows\system32\DNSAPI.dll
    0x75e10000 - 0x75e17000 C:\Windows\system32\WINNSI.DLL
    0x75df0000 - 0x75e10000 C:\Windows\system32\dhcpcsvc6.DLL
    0x72730000 - 0x72738000 C:\Windows\System32\winrnr.dll
    0x72560000 - 0x7256f000 C:\Windows\system32\napinsp.dll
    0x72520000 - 0x72532000 C:\Windows\system32\pnrpnsp.dll
    0x758f0000 - 0x758f6000 C:\Windows\System32\wshtcpip.dll
    0x73a30000 - 0x73a36000 C:\Windows\system32\rasadhlp.dll
    0x6d4e0000 - 0x6d4e9000 C:\Program Files\Java\jre1.5.0\bin\nio.dll
    0x6d1c0000 - 0x6d1e3000 C:\Program Files\Java\jre1.5.0\bin\dcpr.dll
    0x6d3c0000 - 0x6d3df000 C:\Program Files\Java\jre1.5.0\bin\jpeg.dll
    0x77a30000 - 0x77aa4000 C:\Windows\system32\COMDLG32.DLL
    0x744b0000 - 0x74536000 C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.6000.16386_none_87e0cb09378714f1\COMCTL32.dll
    0x6c640000 - 0x6c6f9000 C:\Windows\system32\spool\DRIVERS\W32X86\3\UNIDRVUI.DLL
    0x6cb30000 - 0x6cb8e000 C:\Windows\system32\spool\DRIVERS\W32X86\3\UNIDRV.DLL
    0x6c0e0000 - 0x6c215000 C:\Windows\system32\spool\DRIVERS\W32X86\3\hpz3rlhn.dll
    0x71a90000 - 0x71af6000 C:\Windows\system32\msvcp60.dll
    0x6c590000 - 0x6c635000 C:\Windows\system32\spool\DRIVERS\W32X86\3\hpzlelhn.dll
    0x06630000 - 0x06670000 C:\Windows\system32\spool\DRIVERS\W32X86\3\HPFIME50.dll
    0x73180000 - 0x73191000 C:\Windows\system32\msvcirt.dll
    0x77090000 - 0x77114000 C:\Windows\system32\CLBCatQ.DLL
    0x72d40000 - 0x72e69000 C:\Windows\System32\msxml3.dll
    0x759b0000 - 0x759e8000 C:\Windows\system32\rsaenh.dll
    0x6b930000 - 0x6bbd2000 C:\Windows\system32\spool\DRIVERS\W32X86\3\hpzuilhn.dll
    0x6db30000 - 0x6db76000 C:\Windows\system32\COMPSTUI.dll
    0x75600000 - 0x75605000 C:\Windows\system32\MSIMG32.dll
    VM Arguments:
    jvm_args: -Xbootclasspath/a:C:\Program Files\Java\jre1.5.0\lib\javaws.jar;C:\Program Files\Java\jre1.5.0\lib\deploy.jar -Djnlpx.home=C:\Program Files\Java\jre1.5.0\bin -Djnlpx.splashport=49680 -Djnlpx.jvm="C:\Program Files\Java\jre1.5.0\bin\javaw.exe" -Djnlpx.remove=true -Djava.security.policy=file:C:\Program Files\Java\jre1.5.0\lib\security\javaws.policy -DtrustProxy=true -Xverify:remote -Djnlpx.heapsize=NULL,NULL
    java_command: com.sun.javaws.Main C:\Users\NUNYAB~1\AppData\Local\Temp\javaws2
    Environment Variables:
    CLASSPATH=.;C:\Program Files\QuickTime\QTSystem\QTJava.zip
    PATH=C:\Program Files\Java\jre1.5.0\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Internet Explorer;;"C:\Program Files\Java\jre1.5.0\bin"
    USERNAME=Nunya Buisness
    OS=Windows_NT
    PROCESSOR_IDENTIFIER=x86 Family 6 Model 10 Stepping 9, CentaurHauls
    --------------- S Y S T E M ---------------
    OS: Windows NT 6.0 Build 6000
    CPU:total 1 family 6, cmov, cx8, fxsr, mmx, sse, sse2
    Memory: 4k page, physical 456576k(86412k free), swap 1477948k(738716k free)
    vm_info: Java HotSpot(TM) Client VM (1.5.0-b64) for windows-x86, built on Sep 15 2004 03:00:31 by "java_re" with MS VC++ 6.0

    Hi Paula,
    I am getting a similar issue. Have you found a solution and/or the root cause of the violation?
    Thanks,
    Sean

  • I receive "Database access denied" when trying to add component 4543BD

    I receive "Database access denied" when trying to add component 4543BD to my schematic. This component was added from a previous version. I'm using Multisim version 12.0.0  Student edition.
    Solved!
    Go to Solution.

    Hi Diarra,
    I checked my database and  the  4543 is not in the Student Edition. If you opened a schematic that was created in a higher version such as the Educaiton Edition and copied the part to your database, when you place this part you will get the access denied message. 
    Attached is a schematic with the part, you can open it and build you circuit around it.
    Tien P.
    National Instruments
    Attachments:
    4543.ms12 ‏62 KB

  • I just set up my new iMac, and receive error messages when trying to purchase from the iTunes store (error 8003) or update from the App store (error 403 forbidden). THOUGHTS?

    I just set up my new iMac, and receive error messages when trying to purchase from the iTunes store (error 8003) or update from the App store (error 403 forbidden). THOUGHTS?

    I am not sure what you mean by "Flash Player for steam"; the only Flash Player installers I know is the ActiveX (for Internet Explorer) and the plugin (for other browsers); you can find both at http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header
    [topic moved to Flash Player forum]

  • When trying to Airplay from my Macbook Pro Retina, to AppleTv3 it plays for only a few minutes, and then jumps back to the Mac. It seems to do this no matter what I play, music, movies or pictures. I just bought a new router. This could affect it

    When trying to Airplay from my Macbook Pro Retina, to AppleTv3 it plays for only a few minutes, and then jumps back to the Mac. It seems to do this no matter what I play, music, movies or pictures. I just bought a new router. This could affect it.
    I have been playing whole movies before from VLC without problems.
    Any Ideas?

    Welcome to the Apple Community.
    Yes it's network issues or settings that cause these types of problems most of the time.
    The following article(s) may help you.
    Troubleshooting AirPlay
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Wifi Diagnostic Software (for Mac users)
    You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.

Maybe you are looking for

  • ACS 5.1, ASA 8.2.2, AD, Device Access. Can't get it to work...

    Does anyone have any direction/pointers on how to configure ACS 5.1 to use AD to authenticate and authorize device admin access for Cisco ASA firewalls running 8.2.2? The only way I can seem to get it to work is to tell it to continue if authenticati

  • Order related or delivery related billing

    Arnab Sarkar In Sales doc header control, if the field of Del. related billing and order related billing is filled up, then what kind of billing takes place during the invoice creation? del. related billing or order related billing?

  • CAN'T COMPILE HashMap !?!

    Hello, I'm trying to compile FruitMap.java, which code is : public class FruitMap extends java.util.HashMap{ ...thanks to : javac FruitMap.java ...and i can't succed in that, even if i put a main method public class FruitMap extends java.util.HashMap

  • How to open Excel when Safari downloads

    I am using Safari 7 in Mac OS X Mavericks I download many Excel and Word documents during the work day. Pdf's open automatically, but not Excel or Word. I have searched and found a few posts that say adding com.apple.DownloadAssessment.plist to Libra

  • When will the droid maxx get 5.0

    any news on when will the droid maxx gets Android 5.0