Accessing a web service defined in XI with login and password
Hello,
I've configured a web service on XI and made it available. I want to use it from a NWDS portal object. Accessing the page needs authentication.
If I use XMLSpy to make a request I get an enter user login/password screen. But I don't know where i should tell the login and password in my NWDS request.
I tried to add the stuff in the url like this http://user:pass@host:port/... without success
Does anyone know what is to be made in order to let me access my web service ?
In NDWS I get my service ...
(Service) myservice = PortalRuntime.getRuntimeResources().getService("MY/Service");
MyResult myResult = myservice.makeRequest()
Thx,
mejj
Check out
http://hcc.musc.edu/research/shared_resources/xml_complex_types_to_cf_structure_notes.cfm
The last part of that link is .cfm - not sure why its getting
cut off.
Similar Messages
-
Conference link with login and password included
Hi,
I have been trying to find a way to make Adobe Connect send meeting invitation e-mails with login and password included in the link - unfortunately to no avail.
Does anyone know, if it's at all possible to do it and if so, how it's done?
I'm still on a trial version, but I've been assured, that it shoudn't be a problem.
Thanks in advance for any hints!
KamilOK, I played with it and here is how I got it to work:
Appending the URL:
The URL would need to be appended with /?login=username&password=password. The "api/xml?action=" string was incorrect. I verified that this does work.
The full URL would look similar to this: http://realeyesconnect.adobeconnect.com/bestroomever/?login=myusername&password=drowssap
The login can also be done programmatically.You would need to do the following steps to get the log-in to be automatic.
Log the individual into the server:http://YourServerURL/api/xml?action=login&login=username&password=password
Should return a value of OK
Get the BREEZESESSION cookie for the user:
http://YourServerURL/api/xml?action=common-infoShould show a value similar to this:<cookie>na3breezr59qzu2pp2qy4zdm</cookie>
Log the user in to the room with the cookie:http://YourServerURL/RoomLink/?session=na3breezr59qzu2pp2qy3zdm
Guest names can also be added to the url link. These options are described here: http://help.adobe.com/en_US/connect/9.0/webservices/WS5b3ccc516d4fbf351e63e3d11a171dd2d4-7 ff4_SP1.html -
Send Email for manager of the user with Login and Password the user.
Hello everyone,
I need to send an email to the manager of the user with login and password when it is created in AD.
I already have a mail server configured in the IT Resource. It has some component of the IDM that solve this issue?
Anyone you help me with the next steps?
Thank you.Thank you for your attention.
It did not work, I did another test to send email notifying you when the User change password.
The following error message appears in oim_server1-diagnostic.log:
[2011-08-08T19:21:30.865-03:00] [oim_server1] [NOTIFICATION] [] [oracle.iam.passwordmgmt.impl] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 88a924181f586e03:-25ab9c82:131aa884464:-8000-0000000000008862,0] [APP: oim#11.1.1.3.0] Resetting password
[2011-08-08T19:21:30.936-03:00] [oim_server1] [NOTIFICATION] [IAM-0080013] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 88a924181f586e03:-25ab9c82:131aa884464:-8000-0000000000008862,0] [APP: oim#11.1.1.3.0] Kernel executing default validation with process id, event id, entity and operation 59,612.0.User.RESET_PASSWORD
[2011-08-08T19:21:31.155-03:00] [oim_server1] [NOTIFICATION] [IAM-3050013] [oracle.iam.identity.usermgmt.impl] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 88a924181f586e03:-25ab9c82:131aa884464:-8000-0000000000008862,0] [APP: oim#11.1.1.3.0] Searching for users with the specified criteria.
[2011-08-08T19:21:32.018-03:00] [oim_server1] [WARNING] [] [oracle.iam.passwordmgmt.impl] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 88a924181f586e03:-25ab9c82:131aa884464:-8000-0000000000008862,0] [APP: oim#11.1.1.3.0] Sending Reset Password Notification is not successful
[2011-08-08T19:21:32.639-03:00] [oim_server1] [NOTIFICATION] [IAM-0080046] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 88a924181f586e03:-25ab9c82:131aa884464:-8000-0000000000008862,0] [APP: oim#11.1.1.3.0] Completed orchestration with action result - oracle.iam.platform.kernel.vo.EventResult@4fe0d018
[2011-08-08T19:21:32.642-03:00] [oim_server1] [NOTIFICATION] [IAM-0080011] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: 88a924181f586e03:-25ab9c82:131aa884464:-8000-0000000000008862,0] [APP: oim#11.1.1.3.0] Orchestration process with id 59,612 started running in a new thread.
Edited by: Piza on 08/08/2011 15:24
Edited by: Piza on 08/08/2011 15:26 -
Web service functions in SSO without username and password
Is there a way to use the Public Report Web Service functions when configured in SSO and without passing a username and password? I was able to try out the web service and make it work. As we all know, you need to pass a username and password for each web service call unless your reports can be accessed by guests. In an SSO + LDAP server configuration, there are cases in which you are not allowed to get the password. The password can not be decrypted.
Is there a way to still use web service? or do you need to use the url approach instead? But if you use the url approach then you may be limited to generating reports only.
I'm thinking there should be since if you are already logged in for SSO then you should be able to generate.
Any way to configure this?<i>When I access web reports from bw.</i>
i hope you are not talking about BEX web reports , since you have mentioned ITS.
Is it a standlone ITS or intergrated ITS?
can you post the url pattern here.
Regards
Raja -
HP Photosmart 5510d B11H
CQ183A
Windows 7, Vista, and Linux
I installed the printer everything works until I try to access certain settings in the Embedded Web Server. I pops up a box asking for admin login. Initially, the status page claimed the Admin password was set even though I never set that up. Through chatting with tech support rests cleared this, it is now reporting Not Set. However, I still can not login to check/change settings etc.
I think this printer had been purchased then returned to the store because the manual was missing. I downloaded the manual and did not find any mention of how to access the password settings. So far tech support has not been able to answer my question,
Is there a default?
How do I access the EWS settings -> security to setup a password?Hello MREnder,
From what I am reading, you may need to call in to get a factory reset done. These resets can only be done over the phone. You can find the number at eprintcenter.com under the support section.
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
B1if JDBC connection to a share folder with login and password
Hi,
I need to connect to data base using jdbc driver. Data Base is in a share folder. I have an IP address, login and password. How to configure B1if jdbc to connect to this data base? This data base is a DBF file.
Regards
SzymonProblem solved.
-
Problem with accessing a web service from outside world
Hello SAP experts
I have a custom BAPI for which I have created a webservice.
If I login as an admin to the BOX where I have installed this SAP server and open an internet explorer window and give the URL, I can access the web service without any problem. This is just a simple BAPI that searches for some data from a table based.
However, when I give the same URL from a different PC, it can open the web service and in the fields if I give the data and click on send button, it fails with an error '500 Internal Server Error '.
I looked for the details of this error on internet and it says that this is some general error and solutions that it suggested doesn't help my scenario.
Has anyone seen this problem before? Any help will be highly appreciated.
Tks
Rami have tried the stack trace in the catch but as i said on the statement where i made the object for the service the program just exits. it didn't return any exception or any output.
thanx for refering me any answer....... -
Accessing external web service with non-constant URL
Hello, all
I am looking in the documentation on accessing external web services, but either I am looking in the wrong place, or the documentatoin is lacking info.
My clients have several web services in the local network (regular services, not DB-based), the have the same interface, but different URL's.
Versions of the DB are 11, 12, and 16.
First of all, I do not see in the specs an option for a non-hardcoded URL. The logic says that this has to be possible, but I cannot find it.
Second, I need to see an example of accessing an XML or JSon based service, I cannot find it in the specs either.
Can anyone point me to a document with examples?
Thank you
ArcadyThe following will call a web service with whatever URL you pass in as the argument "myurl". I think that is what you are looking for.
CREATE PROCEDURE cli_test2( myurl LONG VARCHAR )
RESULT( httpheaders long varchar, httpvalues long varchars
URL '!myurl'
To deal with the resulting data in XML, use the OPENXML() function.
eg. To turn an XML list of employees that looks like this:
<root>
<row EmployeeID="102" Surname="Whitney" GivenName="Fran" StartDate="1984-08-28"/>
</root>
into a table of results, you would do this (where xmlgetemplist() is the web service call):
CREATE OR REPLACE PROCEDURE xmlgetemplist() RESULT( httpheader long varchar, httpbody long varchar)
URL 'http://localhost/demo/xmlEmployeeList'
TYPE 'HTTP:GET';
create variable res long varchar;
-- call the web service
select httpbody into res from xmlgetemplist() where httpheader = 'Body'
-- extract the XML elements into a SQL result set
select * from openXML( res, '/root/row' ) WITH ( EmployeeID INT '@EmployeeID',
GivenName CHAR(20) '@GivenName',
Surname CHAR(20) '@Surname',
PhoneNumber CHAR(10) '@Phone');
To deal with the resulting data in JSON, use the sp_parse_json() procedure.
eg.
To turn a JSON formatted list of employees that looks like this:
"EmployeeID": 102,
"Surname": "Whitney",
"GivenName": "Fran",
"StartDate": "1984-08-28",
"TerminationDate": null
into a table of results, you would do this (where jsongetemplist() is the web service call):
CREATE OR REPLACE PROCEDURE jsongetemplist() RESULT( httpheader long varchar, httpbody long varchar)
URL 'http://localhost/demo/jsonEmployeeList'
TYPE 'HTTP:GET';
create variable foo long varchar;
--call the webservice
select httpbody into foo from jsongetemplist() where httpheader = 'Body';
--turn the json result into a structured array of data
-- this step is required because of less structured nature of JSON
call sp_parse_json( 'output_array', foo);
--extract the JSON elements from the output array into a SQL result set
SELECT output_array[[row_num]].EmployeeID as EmployeeID,
output_array[[row_num]].SurName as SurName,
output_array[[row_num]].GivenName as GivenName,
output_array[[row_num]].StartDate as StartDate,
output_array[[row_num]].TerminationDate as EndDate
FROM sa_rowgenerator(1, CARDINALITY(output_array))
Hope this helps,
--Jason -
Issue with accessing OES Web services
Hi,
I have a question regarding access OES web services from external application. I am trying to validate the OES WS for Authorization, but I am getting an error - "Error getting response; org.apache.commons.httpclient.NoHttpResponseException: The server failed to respond"
Is there any specific sequence which I need to follow while accessing this web service, such as first the user needs to be authenticated and then access can be determined or like?
Thanks in advance!!Hi Kevin,
Would you be able to tell me how you generate the web service client? And when you manage to generate the client, does it automatically generate <generated_name>_Stub.xml?
Thanks,
Alfonso Agustinus -
Hello everyone,
I developed a Web Service prototype accessing remote EJB using the EJB
control with special syntax in the jndi-name attribute: @jws:ejb
home-jndi-name="t3://10.10.245.70:7131/AccountDelegatorEJB"
Everything works fine, but I get an error when I restrict access to my web
service with a declarative security model by implementing steps provided in
help doc:
- Define the web resource you wish to protect
- Define which security role is required to access the web resource
- Define which users are granted the required security role
- Configure WebLogic Server security for my web service(Compatibility
Security/Users)
I launch the service by entering the address in a web browser. When prompted
to accept the digital certificate, click Yes, when prompted for network
authentication information, enter username and password, navigate to the
Test Form tab of Test View, invoke the method by clicking the button and I
get the following exception:
<error>
<faultcode>JWSError</faultcode>
<faultstring>Error during JNDI lookup from
jndi:t3://10.10.245.70:7131/AccountDelegatorEJB[Lookup failed for
name:t3://10.10.245.70:7131/AccountDelegatorEJB]</faultstring>
<detail>
<jwErrorDetail> weblogic.jws.control.ControlException: Error during JNDI
lookup from jndi:t3://10.10.245.70:7131/AccountDelegatorEJB[Lookup failed
for name:t3://10.10.245.70:7131/AccountDelegatorEJB] at
weblogic.knex.control.EJBControlImpl.acquireResources(EJBControlImpl.java:27
8) at
weblogic.knex.context.JwsInternalContext.acquireResources(JwsInternalContext
.java:220) at
weblogic.knex.control.ControlHandler.invoke(ControlHandler.java:260) at
ibas.AccountControl.getTransactionHistory(AccountControl.ctrl) at
ibas.GetSecure.retrieveVisaHistoryTxn(GetSecure.jws:64) </jwErrorDetail>
</detail>
</error>
I have a simple Hello method as well in my WebService (which is also
restricted) and it works fine, but remote EJB access doesn't. I tested my
prototype on Weblogic 7.2 and 8.1 platforms - same result.
Is that a bug or I am missing some additional configuration in order to get
that working. Has anyone seen similar behavior? Is there a known resolution?
Or a suggested way to work around the problem?
Thank you.
AndreAndre,
It would be best if this issue is handled as an Eval Support case. Please
BEA Customer Support at http://support.beasys.com along with the required
files, and request that an Eval support case be created for this issue.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"Andre Shergin" <[email protected]> wrote in message
news:[email protected]...
Anurag,
I removed "t3", still get an error but a different one (Unable to create
InitialContext:null):
<error>
<faultcode>JWSError</faultcode>
<faultstring>Error during JNDI lookup from
jndi://secuser1:[email protected]:7131/AccountDelegatorEJB[Unable to
create InitialContext:null]</faultstring>
<detail>
<jwErrorDetail> weblogic.jws.control.ControlException: Error during JNDI
lookup from
jndi://secuser1:[email protected]:7131/AccountDelegatorEJB[Unable to
create InitialContext:null] at
weblogic.knex.control.EJBControlImpl.acquireResources(EJBControlImpl.java:27
8) at
weblogic.knex.context.JwsInternalContext.acquireResources(JwsInternalContext
.java:220) at
weblogic.knex.control.ControlHandler.invoke(ControlHandler.java:260) at
ibas.AccountControl.getTransactionHistory(AccountControl.ctrl) at
ibas.GetVisaHistoryTransactions.getVisaHistoryTxn(GetVisaHistoryTransactions
.jws:67) </jwErrorDetail>
</detail>
</error>
Note: inter-domain communication is configured properly. The Web Service to
remote EJB works fine without a declarative security.
Any other ideas?
Thank you for your help.
Andre
"Anurag" <[email protected]> wrote in message
news:[email protected]...
Andre,
It seems you are using the URL
jndi:t3://secuser1:[email protected]:7131/AccountDelegatorEJB
whereas you should not be specifying the "t3:" protocol.
The URL should be like
jndi://secuser1:[email protected]:7131/AccountDelegatorEJB
Please do let me know if you see any issues with this.
Note that this will only allow you to access remote EJBs in the same WLS
domain. For accessing EJBs on another domain, you need to configure
inter-domain communication by
following a few simple steps as mentioned at
http://e-docs.bea.com/wls/docs81/ConsoleHelp/jta.html#1106135. This link has
been provided in the EJB Control Workshop documentation.
Regards,
Anurag
"Andre Shergin" <[email protected]> wrote in message
news:[email protected]...
Raj,
I tried that before, it didn't help. I got similar error message:
<error>
<faultcode>JWSError</faultcode>
<faultstring>Error during JNDI lookup from
jndi:t3://secuser1:[email protected]:7131/AccountDelegatorEJB[Lookup
failed for
name:t3://secuser1:[email protected]:7131/AccountDelegatorEJB]</faultstr
ing>
<detail>
<jwErrorDetail> weblogic.jws.control.ControlException: Error during JNDI
lookup from
jndi:t3://secuser1:[email protected]:7131/AccountDelegatorEJB[Lookup
failed for
name:t3://secuser1:[email protected]:7131/AccountDelegatorEJB] at
weblogic.knex.control.EJBControlImpl.acquireResources(EJBControlImpl.java:27
8) at
weblogic.knex.context.JwsInternalContext.acquireResources(JwsInternalContext
.java:220) at
weblogic.knex.control.ControlHandler.invoke(ControlHandler.java:260) at
ibas.AccountControl.getTransactionHistory(AccountControl.ctrl) at
ibas.GetSecure.retrieveVisaHistoryTxn(GetSecure.jws:64) </jwErrorDetail>
</detail>
</error>
Anything else should I try?
P.S. AccountDelegatorEJB, the remote EJB my Web Service calls is NOTaccess
restricted.
I hope there is a solution.
Thanks,
Andre
"Raj Alagumalai" <[email protected]> wrote in message
news:[email protected]...
Andre,
Can you try using the following url with username and password
jndi://username:password@host:7001/my.resource.jndi.object ?
once you add webapp level security, the authenticated is the user who
invokes the EJB.
http://e-docs.bea.com/workshop/docs81/doc/en/workshop/guide/controls/ejb/con
CreatingANewEJBControl.html?skipReload=true
has more info on using remote EJB's.
Hope this helps.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"Alla Resnik" <[email protected]> wrote in message
news:[email protected]...
Hello everyone,
I developed a Web Service prototype accessing remote EJB using the EJB
control with special syntax in the jndi-name attribute: @jws:ejb
home-jndi-name="t3://10.10.245.70:7131/AccountDelegatorEJB"
Everything works fine, but I get an error when I restrict access to my
web
service with a declarative security model by implementing steps
provided
in
help doc:
- Define the web resource you wish to protect
- Define which security role is required to access the web resource
- Define which users are granted the required security role
- Configure WebLogic Server security for my web service(Compatibility
Security/Users)
I launch the service by entering the address in a web browser. Whenprompted
to accept the digital certificate, click Yes, when prompted for
network
authentication information, enter username and password, navigate tothe
Test Form tab of Test View, invoke the method by clicking the buttonand
I
get the following exception:
<error>
<faultcode>JWSError</faultcode>
<faultstring>Error during JNDI lookup from
jndi:t3://10.10.245.70:7131/AccountDelegatorEJB[Lookup failed for
name:t3://10.10.245.70:7131/AccountDelegatorEJB]</faultstring>
<detail>
<jwErrorDetail> weblogic.jws.control.ControlException: Error during
JNDI
lookup from jndi:t3://10.10.245.70:7131/AccountDelegatorEJB[Lookupfailed
for name:t3://10.10.245.70:7131/AccountDelegatorEJB] at
weblogic.knex.control.EJBControlImpl.acquireResources(EJBControlImpl.java:27
8) at
weblogic.knex.context.JwsInternalContext.acquireResources(JwsInternalContext
.java:220) at
weblogic.knex.control.ControlHandler.invoke(ControlHandler.java:260)at
ibas.AccountControl.getTransactionHistory(AccountControl.ctrl) at
ibas.GetSecure.retrieveVisaHistoryTxn(GetSecure.jws:64)</jwErrorDetail>
</detail>
</error>
I have a simple Hello method as well in my WebService (which is also
restricted) and it works fine, but remote EJB access doesn't. I testedmy
prototype on Weblogic 7.2 and 8.1 platforms - same result.
Is that a bug or I am missing some additional configuration in order
to
get
that working. Has anyone seen similar behavior? Is there a knownresolution?
Or a suggested way to work around the problem?
Thank you.
Andre -
How to access .asmx Web Service using JAVA? Newbie
Hello Experts,
Currently, I have a project where in I have to access a ,NET web service. It is made of C#. I just want to ask how will I start the accessing process? I made this simple equation on how my project is.
Java Project + C#.Net Web Service = Integration
1. Do i need to create a Web Service too for the Java Project? If yes, What are the necessary tools needed for the creation of this Java Web Service?
2. The .NET Web Service is available online. (It is made by other people).
3. Based on the equation, what is the equivalent technology for the + sign?
4. Can you site a concrete example for accessing a web service?
5. I'm new here. Totally I have no idea where to start.
6. Thank you experts.
Edited by: Benedict.Aluan on 05 30, 08 1:38 PM
Edited by: Benedict.Aluan on 05 30, 08 1:39 PMHello
Thanks a lot for your help ...
I am developing simple J2EE based web service client using IBM WSAD 5.1. I have used the following code to call .asmx web service in Java
String url = "http://www.w3schools.com/webservices/tempconvert.asmx?wsdl";
String namespace = "http://tempuri.org/";
name = request.getParameter("txtName");
try
System.out.println("In Internet Service");
ServiceFactory factory = ServiceFactory.newInstance();
Service serv = factory.createService(new URL(url),new QName(namespace,"TempConvert"));
System.out.println("Got Service......");
Call obj = (Call)serv.createCall();
System.out.println("Got Call......");
obj.setProperty(Call.ENCODINGSTYLE_URI_PROPERTY,"");
obj.setProperty(Call.OPERATION_STYLE_PROPERTY,"wrapped");
obj.setTargetEndpointAddress(url);
obj.setPortTypeName(new QName(namespace,"TempConvertSoap"));
obj.setOperationName(new QName(namespace,"FahrenheitToCelsius"));
obj.addParameter("param1",XMLType.XSD_STRING,String.class,ParameterMode.IN);
obj.setReturnType(XMLType.XSD_STRING);
System.out.println("Parameters Set.....");
Object[] params = new Object[]{name};
k = (String)obj.invoke(params);
System.out.println("Result: "+k);
catch(Exception e)
System.out.println("Exception is : "+e);
}But this code is throwing exception that
Invalid Address "http://www.w3schools.com/webservices/tempconvert.asmx?wsdl"I have also tried this URL with Java Proxy. But it showing the same error.
Plz can u tell me how to access .asmx web service ?
Waiting 4 reply. -
How to access existing Web Service
I want to access the web service (SOAP) from java classes.
Can Any body help me by sending sample code providing that how to send my XML content to the existing web service and get the response from that.
I want to further analyse that it is succedded or not from the response of web service (the response is also in XML).
Thanks,
Dipen.You are in the wrong forum - web services are not available with Sun webserver. Speaking of examples to check out, I would recommend you to install Sun appserver 8.1 or 8.2 and check examples that come with it, specifically in "samples/webservices" and "samples/xml" directories.
-
Hi.
I've exactly the same problem that is descripted
here, so I'll add its description here.
My SharePoint is 2010
I am trying to access the web services that are located in this url:
http://<part_of_th_url_omitted>/_vti_bin/Lists.asmx. I have no problem accessing
this URL using my broswer, that is, when I type the URL and my browser's address bar and press enter, I can see the list of the services that are available. I encounter no problem by accessing this site through my browser at all.
However, when I try to access the services from that URL (http://<part_of_the_url_omitted>/_vti_bin/Lists.asmx),
a Discovery Credential Dialog box prompts me for my username and password. SO what I do is I enter my username and password that I used to access the sharepoint using my browser, the problem is, the dialog box doesn't seem to accept the username and password
that I enter as the dialog box is keep on appearing.
Below are the detailed steps on how I go about in adding the Web Services.
1. From the Solution Explorer, I right click on the "Service References" folder.
2. From the context menu that appears, I Click on "Add Service Reference...". The "Add Service Reference" Dialog box will appear.
3. From the "Add Service Reference" dialog box, I click on the "Advanced,,," button which can be seen at the bottom-left of the dialog
box. The "Service Reference Settings" Dialog box will appear.
4. From the "Service Reference Settings" dialog box, I click on the "Add Web Reference..." dialog box. The "Add Web Reference"
Dialog box will appear. This is the dialog box where I can type the URL of the service that I want to access. So I type "http://<part_of_the_url_omitted>/_vti_bin/Lists.asmx".
AFter typing that, I click on the Go button (which is the green arrow button at the right of the address bar of this dialog box).
5. After doing that, a prompt dialog box will appear which has the title "Windows Security" and it is aking for my username and password. SO
what I do is I enter the Username and the Password that I use in accessing the sharepoint site (http://<part_of_the_url_omitted>/_vti_bin/Lists.asmx)
6. The prompt seems to accept the Username and Password, but after that, a new dialog box appeared with the title "Discovery Credential" and
it says "The Service 'http://<part_of_the_url_omitted>/_vti_bin/Lists.asmx' requires a username and
password". SO what I do is I enter again the un and pw that I use to access the sharepoint site, the one that I used inm the previous dialog box.
7 After entering the username and the password and clicking the OK button. The dialog box reappears still asking for a username and a password, but this
time, it shows a different message. It says "The Service 'http://<part_of_the_url_omitted>/_vti_bin/Lists.asmx/$metadata'
requires a username and password". SO it really, what oonly changed is the URL, it has now the $metadata at the end. What do I do? I eneter the username and password again.
8. After clicking Ok again, the dialog box reappears, now it says "The Service 'http://<part_of_the_url_omitted>/_layouts/1033/error.aspx'
requires a username and password." Now it shows a very different username. Of ocurse, I still type in the username and password and click Ok.
9. after doing that, the dialog box reappears again and it shows the same message as in step 6. So I do steps 6, 7 and 8 in a loop.
10. When I finally get tired of entering the username and password, I click on cancel. The message box reappears again. So I click on cancel again. After
doing that, I can then, surprisingly, see the list of the web services. However, not surprisingly, I still can't use it because the "Add Reference" button which I need to click in order to use the Web services is disabled. So I can only see the list
of the services but I can't use it.Hi Gaston,
I would suggest you the following thread, check whether it meet your scenario, it shows that if you have set IE options to remember the username and password, and you have enter wrong password before, this issue may happen:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/a7f466a5-0e4a-4f75-ad29-9591e2357e10/sharepoint-web-services-visual-studio
Thanks,
Qiao Wei
TechNet Community Support -
Problem accessing https Web service from behind proxy
Hi all,
I have this constant timeout issue which occurs whenever I try to access the Web service from behind a proxy.
Find below the error logs -
AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException
faultSubcode:
faultString: java.net.ConnectException: Connection timed out: connect
faultActor:
faultNode:
faultDetail:
{http://xml.apache.org/axis/}stackTrace:java.net.ConnectException: Connection timed out: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
at java.net.Socket.connect(Socket.java:452)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.axis.components.net.DefaultSocketFactory.create(DefaultSocketFactory.java:136)
at org.apache.axis.components.net.DefaultSocketFactory.create(DefaultSocketFactory.java:100)
at org.apache.axis.transport.http.HTTPSender.getSocket(HTTPSender.java:129)
at org.apache.axis.transport.http.HTTPSender.writeToSocket(HTTPSender.java:389)
at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:87)
at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
at org.apache.axis.client.AxisClient.invoke(AxisClient.java:144)
at org.apache.axis.client.Call.invokeEngine(Call.java:2688)
at org.apache.axis.client.Call.invoke(Call.java:2671)
at org.apache.axis.client.Call.invoke(Call.java:2357)
at org.apache.axis.client.Call.invoke(Call.java:2280)
at org.apache.axis.client.Call.invoke(Call.java:1741)
I am using Tomcat 5.0.19 . Could anyone suggest a possible solution to the same?
The system works fine when I use a http endpoint.Hi,
By default, your application tries to connect to the Net directly : if you have to specify a proxy, use either these lines in your code :
System.setProperty("http.proxySet", "true");
System.setProperty("http.proxyHost", "proxy");
System.setProperty("http.proxyPort", "8080");
Or specify them in the command line with the "-D"option.
Ex : java .... -Dhttp.proxySet=true .... MyApp
Hope it helps.
See ya -
Web service operation ... with parameters {} cannot be found
Hi All,
I am accessing a web service of a web site using ColdFusion.Each time I am calling the web service I am getting the message "Web service operation ... with parameters {} cannot be found".The wsdl file showing the parameter as complex type .So I have passed value to the particular method using structure and xml type each time I gets that error message.I can not post here the wsdl for security reason.
When I am calling this Web service from .net it is working without any problem. .NET directly creating the objects of the parameter which the method is needed from the wsdl but I don't know whether it is possible in ColdFusion or not.Also I don't know whether the web service in .net or in other language.
Please suggest something.
Thanks
UpenThanks for your response.
Yes, I have passed all the arguments but it seems the web application is coded in .net and by googling I came to know that if the .net receives a complex type of object then it creates problem when we pass argument from coldfusion.(means type mismatch)
If you know about it please suggest .
Maybe you are looking for
-
Hi, All my Pages and Numbers documents on iCloud.com have suddenly become impossible to open. On iCloud.com (from IE10 or Google Chrome 40/Win 8) their file names appear scrambled (encrypted?) and if I try to open them I get this error message: "You
-
Multiple PERNR / PERSON ID Concept against MSS Scenario
I have a question from a portal perspective in retrospec with the whole Global Assignment functionality. You and I know the Manager is able to view his/her employee via their PERNR. In situation where you activate global assignment, a person may have
-
Browser curser default to search box not address box
Often when using the browser and tapping for top for the search box, the curser starts in the URL/ IP box by default. Most annoying when you type in your search words only to have to redo the entry in the search box because, it thought you were wanti
-
Form Resize Affect Column width?
Hi Folks, I have a very strange problem. I try to add a new matrix to Production Order form. The matrix will have 2 columns which are: 1. No - Non Editable (for numbering) 2. Description (information). My code is like the following: oItem = o
-
Need Sun WorkShop 6 update 2 for Solaris 8
Would it be possible to download an installation package for Sun WorkShop 6 update 2 for Solaris 8? I have an old development project that I need to resurrect, and it requires this version of the Sun compiler. Thanks, -Ken Cooley