Accessing Enterprise Manager for multiple db's on same machine

I've installed Oracle 11g Enterprise Edition (basic installation with starter database) on my laptop. I've created two databases and the link to
access Database Control (Enterprise Manager) for each is as follows
[https://192.168.2.3:5500/em]
[https://192.168.2.2:1158/em]
I cannot access either of them. I've tried [https://localhostname:####/em,] still no access.
The system variable(s) ORACLE_HOME is not currently defined. I've tried to define it as follows, ORACLE_HOME=C:\app\product\11.1.0\db_1.
In Windows XP services OracleDBConsoleMyDB1 and OracleDBConsoleMyDB2 each service is
set to Automatic . . . but neither shows current status.
The databases are up and running, I can connect and query from each.
How can I get the web interface to Enterprise Manager to work?
Thanks.

Ok, I found the two directories;
C:\app\product\11.1.0\db_1\oc4j\j2ee\OC4J_DBConsole_192.168.2.2_alpdev
C:\app\product\11.1.0\db_1\oc4j\j2ee\OC4J_DBConsole_192.168.2.3_cnpdev
I also found these two as well;
C:\app\product\11.1.0\db_1\192.168.2.2_alpdev
C:\app\product\11.1.0\db_1\192.168.2.3_cnpdev
My machine name is xxxxxx1700, so I had to make the following changes to get
any meaningful output.
Renamed directories (folders) under C:\app\product\11.1.0\db_1
to xxxxxx1700_alpdev and xxxxx1700_cnpdev, OC4J_DBConsole_xxxxx1700_alpdev did not work,
neither did OC4J_DBConsole_xxxxx1700_alpdev.
Under C:\app\product\11.1.0\db_1\oc4j\j2ee, created two new directories OC4J_DBConsole_xxxxx1700_alpdev
and OC4J_DBConsole_xxxxxx1700_cnpdev and copied contents into these two folders from
OC4J_DBConsole_192.168.2.2_alpdev and OC4J_DBConsole_192.168.2.3_cnpdev.
I then SET ORACLE_SID's;
C:\> set ORACLE_SID=alpdev
C:\>emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://192.168.2.2:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ...The OracleDBConsolealpdev service is starting.
The OracleDBConsolealpdev service could not be started.
A system error has occurred.
System error 3 has occurred.
The system cannot find the path specified.
C:\>set ORACLE_SID=cnpdev
C:\>emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://192.168.2.3:5500/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ...The OracleDBConsolecnpdev service is starting.
The OracleDBConsolecnpdev service could not be started.
A system error has occurred.
System error 3 has occurred.
The system cannot find the path specified.

Similar Messages

  • Starting up Enterprise Manager for multiple DBs are the same time

    I have a machine with 3 Databases configured, named A, B, and C when I execute "emctl start dbconsole" it only starts for database A which is on port 5500, how do I get emctl to start a listener for all 3 databases that are configured and running?, looking at the emoms.properties, A is on port 5500 and works, B is on port 5501 and C is on port 5502. I do no t care about A as it is an old DB, but B and C are currently in use, however while I can connect to them, I can not get the enterprise manager to start for them. This is all very poorly documented.
    Thanks,
    ERIC

    Trouble Shooting
    Go to DB2HOME/network/admin/tnsname.ora
    Check sid
    suppose sid set abc
    Go to DB2HOME/bin
    set ORACLE_HOME=<DB2HOME>
    set ORACLE_SID=abc
    emctl start listener if it throw error (then check any
    anti virus software is running on your box if running then stop , issue again lsnrctl start )
    emctl start dbconsole
    Follow same steps for DB3
    Let us know if it work for you

  • Can I use FCX for multiple users on the same machine?

    I have one mac pro, and two video cmpanies. I have two users on my machine and would like to set up two different final cut x workplatforms. Is that possible?

    Of course, you can use FCP X from two different user accounts on your machine. The question here, I believe, is how to separate the content that each user accesses.
    One obvious way to achieve that would be to store the content in the system disk - that would put events and projects in each user's Movies folder. But that is a bad option, for performance reasons, and more.
    You could have separate external disks for each user to store his content.
    Also, you could use different disk images which could, say, be all stored in the same internal (but not system) drive.

  • Setting up a shared library for multiple accounts on the same machine

    I am in idiot. I can't figure it out. This is exactly what I did.
    1 - I set up multiple accounts on the computer. 1 for me and another for my wife.
    2 - I loaded all the music into my account's public folder.
    3 - I set the default folder in both hers and mine iTunes for this Public folder
    4 - I then opened iTunes in my account and none of the songs were showing up so I dragged the folder into iTunes and it did its business. Now my account is all set.
    Here are my questions:
    A - Do I need to drag the folder into my wife's account iTunes as well?
    B - If either of us add music when logged in, will it automatically update in the other iTunes interface or is there something specific that needs to (manually) be done?

    Doing it the way you did, you each have your own iTunes library file and are using the same iTunes music folder.
    Changes by one will not be seen by the other and any new music added by one will have to be added to the library by the other.
    Also, if one deletes music, it will be in teh library for the other but it will not be playable because the other person deleted it in the iTunes music folder.
    Launch iTunes, then immediately press and hold Option, then select *Create new library*.
    Create one in Users/Shared.
    Quit iTunes.
    Move all your music into the new /Users/Shared/iTunes/iTunes music folder.
    Login to your Wife's computer account.
    Move all her music into the new /Users/Shared/iTunes/iTunes music folder.
    On her account, launch iTunes, then immediately press and hold Option, then select *Choose existing library*.
    Select the _iTunes library file_ in /Users/Shared/iTunes.
    In iTunes, File -> Add to library and select the iTunes music folder in /Users/Shared/iTunes.
    All the music will be there.
    Quit iTunes and log out of her account and back into your account and launch iTunes normally.
    All music will be there.
    You should go to /Users/Shared/iTunes folder and right click - get info, click *Ownership & Permissions*. Set *You can* to *Read & Write* and set Others to *Read & Write*.
    Click *Apply to enclosed items*.
    Any changes (new/deleted music, ratings, playlists, etc.) by one will be seen by the other sionce you are using the same iTunes library file.
    Only one person can have iTunes open at a time. If you use Fast User switching, one will need to quit iTunes before the other can use it.

  • Enterprise Manager For WebLogic Server 10.3

    Hi,
    I have a weblogic server version 10.3.
    I want to access the Enterprise Manager for the same.I believe standalone version of weblogic server 10.3 doesnt come with
    Enterprise Manager.
    I believe we can have EM if we download Application Development Runtime.
    I tried doing the same ,but I am unable to launch the Enterprise Manager Website.
    My server is running on on port 7001 ,hence I tried accessing the Enterprise Manager
    using the below url i.e http://localhost:7001/em,but i was not able to access.
    Could somebody help me on how I can access the enterprise Manager.
    Regards
    Harish

    Actually, with FMW 11g (WLS version 10.3.1 NOT 10.3), there is now an application called Fusion Middleware Control that is part of the Enterprise Manager family. This typically binds to http://host:port/em on the AdminServer. This is for the FMW components in a single domain, plus any other web tier components like Oracle HTTP Server or Web Cache.
    http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10223/17_em.htm
    Check the docs for installation instructions of this component.

  • Change Reference Attribute - "Manager" for multiple users

    Hi,
    I have a scenario in which I have to create a workflow to change a reference value attribute - "Manager" for multiple users in one go. Is it possible to achieve this with workflow. If yes, then how?
    Regards,
    Manuj Khurana

    Hello,
    not out of the box, since in workflows and custom activities you can only access the reqestor and target object direcly.
    But you can develop your own custom activity that fits you need, or do it with powershell custom activity.
    I did a very similar thing, to be able to change users group membership from the user UI, so I have also edit objects other then requestor and target in a workflow.
    Since both (manager and member) are reference attributes you maybe find this article helpful:
    http://social.technet.microsoft.com/wiki/contents/articles/19615.fim-2010-r2-how-to-manage-group-membership-from-the-user-ui.aspx
    I used this powershell activity in my solution:
    http://fimpowershellwf.codeplex.com/
    Regards
    Peter
    Peter Stapf - ExpertCircle GmbH - My blog:
    JustIDM.wordpress.com

  • Cannot start Enterprise Manager for Fusion Middleware 11g

    Dear all,
    Because I want to install Oracle EGRCM v8.0.1 in Linux x86_64, so I installed Oracle Weblogic 11gR1 and SOA Suite 11g first.
    After installation successfully, I created a base_domain as default, and can start weblogic administration server ( http://localhost:7001/console ) successfully.
    Now I want to use Enterprise Manager for Fusion Middleware 11g. Per "*Oracle® Fusion Middleware Administrator's Guide 11g Release 1 (11.1.1)*", the EM should be available now and the access URL should be http://localhost:7001/em . But when I try to access it, the following error returned:
    Error 404--Not Found
    From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
    +10.4.5 404 Not Found+
    The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
    If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
    So I try to start with emctl in *$MW_HOME/oracle_common/bin/*, the error is as following:
    +./emctl: line 387 /d02/Middleware/oracle_common/perl/bin/perl: No such file or directory+.
    I check the path and find out that no directory named "perl" under */d02/Middleware/oracle_common*. So I try to copy the necessary dir from the dir installed Oracle Database 11g ( *$ORACLE_HOME* ), but it returns following error:
    OC4J Configuration issue. /d02/Middleware/oracle_common/sysman/j2ee not found.
    I try to copy necessary dir from *$ORACLE_HOME* but still cannot start EM.
    Please give some advise about how I can start EM for Fusion Middleware 11g, any idea is appreciate!
    Best Regards,
    Kenny Wang

    Ravi Jegga wrote:
    Hi Kenny
    See this post of mine: Re: Fusion Middleware Console
    For any SOA Domain, unless you have Enterprise Manager Facet enabled (during domain creation process or adding later on by extending it), you will not be able to access the EM Console. For quick testing, open config.xml file for your domain and check the modules specially em module as shown below. It should be there. This is for one of my SOA Cluster Domains with SOA on top of WLS 10.3.2
    <app-deployment>
    <name>em</name>
    <target>AdminServer</target>
    <module-type>ear</module-type>
    <source-path>C:\beawls1032\user_projects\applications\soaDomainCluster1/em.ear</source-path>
    <deployment-order>400</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </app-deployment>
    Thanks
    Ravi JeggaHello Ravi:
    I too like Kenny experienced the EXACT same thing this morning. I was trying to figure out how to modify the formsweb.cfg and I remembered from when I install Oracle9i/10g AS a few years back, that it was on the Enterprise Manager Console for forms (different than the EM for the database). Well that's different than the consoles for Weblogic Server and Weblogic Server for Forms. I ran into the same errors Kenny did, and I followed your steps except that I did install into the domain the Enterprise Manager so when I looked at the config.xml I do see the same code that you posted above. Yet I still get the error when accessing
    http://computer:7001/em
    Also when trying to run emctl (I copied the perl directory from the database) and same error as Kenny. Any tips/clues?
    I'm running on Red Hat Enterprise Linux 5, Oracle 11g (database, Fusion Middleware).
    Thanks,
    Gio

  • Ho can run oracle and enterprise manager in multiple users in Solaris10

    Hi,
    I have successfully installed Oracle 10g Release2 on Oracle Solaris 10 through Oracle user. But now my requirement is to use oracle as well as enterprise manager through multiple users other than oracle. So please instruct me what i have to do for this?
    One thing more can i use enterprise manager in Solaris which installed on another windows, if then then How?
    Thanks in advance.
    Regards,
    Rizi

    Hi Rizi,
    I have successfully installed Oracle 10g Release2 on Oracle Solaris 10 through Oracle user. But now my requirement is to use oracle as well as enterprise manager through multiple users other than oracle. So please instruct me what i have to do for this? Yes, it possible just create another OS user and Install it in a seperate $ORACLE_HOME.
    One thing more can i use enterprise manager in Solaris which installed on another windows, if then then How?May i know which version of enterprise Manager you are using, I assume you are considering about Grid Control Software.
    thanks,
    X A H E E R

  • How to configure Oracle Enterprise Manager for ASM RAC Database ?

    Dears,,
    We have two databases (Primary & Standby), each database has two instances
    Database version: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit
    How to configure Oracle Enterprise Manager for this environment ?
    I need documentation for this please.
    Many thanks & Regards,,

    Assuming an agent is running on the servers you want to monitor,
    navigate to the Agent home page (Via setup --> Agent)
    When in the agent home page select 'Add Database'and press [Go]
    Assuming yopur database now gets recognized, select the Configure icon and enter the password for dbsnmp.
    When done, press [Ok] to return to the agent home page.
    Regards
    Rob
    http://oemgc.wordpress.com

  • Can't find Enterprise Manager for standalone OC4J 10.1.2.0.2

    Hi
    I downloaded standalone OC4J 10.1.2.0.2 from here so I could experiment deploying webservices to it
    http://download.oracle.com/otn/java/oc4j/1012/oc4j_extended.zip
    It installed successfully and I managed to start it ok. When I point my browser at it the home page displays but there does not seem to be an enterprise manager page. I have a jdeveloper 10.1.3 install and when I run the OC4J supplied with that I can navigate to an enterprise manager page and view applications and webservices.
    This is the home page for the 10.1.2.0.2 install
    http://img405.imageshack.us/my.php?image=oc4j101202homepagecq8.jpg
    This is the homepage of the 10.1.3 install supplied with jdeveloper
    http://img399.imageshack.us/my.php?image=oc4j1013homepagegb6.jpg
    (click the images to see their full size)
    In the 10.1.3 screenshot you can see a link to "launch application Server Control". This is missing on the 10.1.2.0.2 homepage. Should it be there for both versions?
    thanks
    paul
    Message was edited by:
    [email protected]

    Hi,
    Enterprise Manager for stand alone OC4J was introduced in 10.1.3. 10.12 does not have this feature
    Frank

  • Enterprise Manager for Oracle 8.1.5 Win NT 4.0

    Anyone know where can I download the Enterprise Manager for Oracle 8.1.5 running Windows NT 4.0?
    The one in the Oralce download is for 8.1.6?
    Thanks
    Eng Wah

    Depends on how big is your database.
    For small database, doing a export and import is quick and dirty.
    For larger database, I would suggest migrate the database. But this means a lot of work and test. This is what I would do if I am doing amigration:
    1. Do a cold backup of your 815 database
    2. On your new test box, try to install 815 and start your old database
    3. Upgrade your database to 8174
    4. Install 10gr2 on your new test box
    5. Migrate your 8174 database to 10gr2.
    6 Test a lot
    7. Repeat steps 1-6 2-3 times
    8. Document tthe process and your test results completely.
    9. Repeat what you document on your production box.

  • Configure Enterprise Manager with multiple Listener

    Configure Enterprise Manager with multiple Listener
    I have created 2 listeners and connected my database with both the listeners. If I stop one listener then it automatically uses second listener vice versa. But facing problem in case of enterprise manager. If i stop first listener which is on 1521 port it is not connecting to another listener which is on 1522 port.
    any help ?

    Your potential problem is Enterprise Manager simply doesn't KNOW about that second listener. You can easily verify that when you look at the monitored targets.
    Enterprise Manager also reconstructs automagically it's own tnsnames.ora! So, it doesn't connect to second -completely redundant and useless - listener, because the tnsnames.ora entry on the Management Sever is incorrect.
    Simply because you didn't made sure OEM could discover the second -completely redundant and useless- listener.
    I notice you apparently don't want to read documentation. Yet the only way to work successfully with Oracle, and to become independent, is to read that documention.
    Apart from that you should be able to find agentca.bat on your OS with one command, so, yes, I pointed you to the documentation, yes, you can find agentca.bat.
    Sybrand Bakker
    Senior Oracle DBA

  • Enterprise Manager for Oracle 7.3.3

    How i can have enterprise manager for database server oracle 7.3.3 ? Because i've try with OEM 9.2.0 it wasnt working.. should i use OEM release 2.0.X on it? and where i can get the OEM 2.0.X ?

    I am wondering whether Oracle 11g comes with
    Enterprise ManagerYes it does. But Enterprise Manager is a common denominator for several products.
    In 11g, "Oracle Enterprise Manager Database Control software is installed by default".
    http://download.oracle.com/docs/cd/B28359_01/server.111/b28301/em_manage002.htm#BABCGBJF
    http://download.oracle.com/docs/cd/B28359_01/install.111/b32002/install_overview.htm#CEGIAJCB
    or not as previous versions 9i and
    10g are having Enterprise Manager in its installation pack.If you are thinking of the java-based OEM Console, then by 11g it is definitely gone.
    http://download.oracle.com/docs/cd/B28359_01/install.111/b32006/whatsnew.htm#BGGBABGJ

  • Oracle Enterprise Manager for Personal Oracle 9i

    I have justdownloded Personal oracle 9i for WIN98.
    Everything was fine. But when I tried to install the Enterprise Management 2.2 (for 8i) I got an errorthat "Oracle .swd.Jrl.1.1.8.10.0 support file is missing.
    I was able to install the OEM for my Personal 8i
    How do I download the OEM for Personal Oracle 9i. I do not have room to install Enterprise Oracle 9i

    You can't use Enterprise Manager for 8i on
    Personal Oracle 9i.
    I have a question.
    I have installed Personal Oracle 8i on my PC,
    but i don't find Oracle Enterprise Manager for 8i download site on OTN. Can you healp me?

  • In-place upgrade of Enterprise Manager for RAC databases is not supported

    upgrading 2 node RAC from 10.2.0.1 to 10.2.0.3 on Windows 2003 64 bit. I got the following:
    In-place upgrade of Enterprise Manager for RAC databases is not supported in this release
    Now I cannot log in to the database control as sys with sysdba role . I get "invalid username/password" error
    I can login as a dba user
    I also get a java error after I log in, some thing about class not found, but then I'm in and I can do everything that I try, although I haven't tried scheduling a backup yet
    Can I upgrade EM to 10.2.0.3?
    If so, how?

    On the patchset readme...
    11.3 Upgrade of Oracle Enterprise Manager Not Supported
    When you start Oracle Database Upgrade Assistant to upgrade 10.2.0.1 database to 10.2.0.3 patch set, the following error occurs:
    Inplace upgrade of Enterprise Manager is not supported for RAC databases is not supported in this release
    Workaround:
    Ignore warning.
    If you drop and recreate the EM repository?
    1). emca -deconfig dbcontrol db repos drop
    2). emca -config dbcontrol db -repos create
    Be careful, doing this put the database on QUIESCE mode.
    Regards,
    Rodrigo Mufalani

Maybe you are looking for

  • Using ipod as hard drive?

    Hi... well this is the situation.. at work i bought a movie on itunes now the thing is my ipod is insync with the computer at home.. now i know that there has to b a way for me to transfer this movie onto my ipod, but i dont want to erase the songs o

  • GR posting date is being considered as Shelf life expiry date

    Following settings made in material master: In Purchasing view: Batch management check box ticked. In Plant data / stor.1 view: (Shelf life data): Max storage period is 1, Time unit: YR Min remaining shelf life:1, Total Shelf life: 365, Period Ind fo

  • Acrobat Pro 9 Used To Work on my 64bit Windows 7 machine

    I recently replaced my 32bit XP platform which was running with Acrobat Pro 9 for a few years with a 64bit Windows 7 earlier this year. It worked just fine. For some reason, I am now finding that trying to 'actuate' the program fails. As does clickin

  • "Could not determine code page" inbound side error

    Guys, We are receiving a flat text file and sending an IDoc, but now I'm getting this error. Any idea what's wrong? And what is that "I::000" in the message? Any help is much appreciated. Thanks a lot, Viktor   <?xml version="1.0" encoding="UTF-8" st

  • I dragged my url to customize toolbar, now my url is gone, how do I get it back?

    I mistakenly dragged my url into the customize toolbar, thinking I'd at it to my Favorites, but, it totally disappeared, how do I get it back? I tried all the suggestions I read elsewhere, but, they didn't work.