Accessing multiple directories using single file adapter

Hi All,
I have data coming from two banks. I need to put them in SAP file server. Now i have two sender adapters for each bank, now is there a way i can use same receiver adapter but create diff directories to store them.
XIer

Hi,
In file sender communication channel there is a check box for Advanced Selection for Source file. Check that and you dont put anything in exclusion which means it takes all the files from multiple direcotires. Please check this weblog where he has excluded some files in the directory. But you dont need to exclude anything.
/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter
Regards,
---Satish

Similar Messages

Save file in multiple directories using receiver file adapter?

Hi,
Is it posible to save file in multiple directories using receiver file adapter?
Regards,
Ashish

Well, there is a round about way to do that -
The idea is to use multi mapping. 1:n mapping
1) Map ur message to 2 different record set nodes. Since you want to use the same file both the mapping will look exactly the same. make sure that the filepath and filename are a part of the output payload message
2) In the file adapter config. make sure the the file name and file path are from these payload fields. You can use a context object to refer these fields. Voila...the files are created in the 2 direcoties you mentioned.
of course the simplest way is to route the same message to 2 business systems/services and write them out using 2 ccs.,
Arvind R

Send multiple files in different directories using Receiver File Adapter

Hi Experts,
I have one File to File without ESR scenario where I have to pick multiple files from different directories and to save them in different directories on receiver side.
Can anyne help me to send multiple files in different directories using receiver file adapter.
Is it possible??
Any help will be appreciated.
Regards,
Danish

hi ,
that is possiable without esr,
we need to create one sender communication channel , in that we nend to use "adavnced selection for source file " for sending multiple files from multiple directories.
we need to create 'n' receiver communication channels and 'n' receiver agreements based on communication channels .
in receiver determination, provide multiple receivers
In interface determination , provide * symbol for receiver communication components
thanks,

How to read multiple files of different name using single file adapter

There are two inbound locations inbound1 and inbound2 , and the files structure present in these two inbound locations are same but the files start with different names example
(1)files in inbound1 starts with file1,file2...
(2)files in inbound2 starts with abc1,abc2...
by using same file adapter with read option how can i read both files....

Hi K.A.N.N.,
You can define multiple directories using the above link in 11g and poll for the file as \*.*.
Alternatively you can use the Synchronous Read and specify the file name at runtime.
You can also use Pick activity to define multiple branches each with a File Adapter to read from a specified location with specified file name. Although it would contain multiple Adapter Definitions at Development-time, only one of the Adapters will execute at Run-Time.
Regards,
Neeraj Sehgal

Insert to multiple table using single DB Adapter

Hi,
I m using Jdev 11g Build JDEVADF_11.1.1.2.0_GENERIC_091029.2229.5536
Can anyone tell me how can we do insert and update operations to mutliple tables using single DB adapter.
I want to do insert in 2 tables and update the third using same DB apater. Is it possible?If yes, how?

Hi,
You can write a PL\SQL (Stored Procedure) to do your operations and call the PL\SQL code from DB Adapter.
-Senaka

How to pick files from multiple directories via Sender File Adapter?

Hi guys,
I have a scenario File to IDOC. The Sender File Adapter has to take all files: .xml from Source directory E://Current/.
Actually directories are like
E:/Plant1/Current/
E:/Plant1/History/
E:/Plant2/Current/
E:/Plant2/History/.
Can I have one Sender File Adapter to pick all *.xml files
from
E:/Plant1/Current/ and
E:/Plant2/Current/ and how can I write it in Source Directory of Communication Channel?
Or do I have to have a Sender File Adapter for each Plant?
Any suggestion please?
Kind regards,
Danijela Zivanovic

Hey
You might wanna have a look at "Additional selection for source file" parameter in sender file adapter.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/singleSenderFileCC4MultipleDirectories
XI/PI: how to exclude files in a sender File adapter?
Even though this method works but there are some constraints,please check help.sap.com for constraints.
Thanx
Aamir

Multiple networks using single network adapter

Hi,
If I have only single network adapter in a OVM server (or single bond interface bond0 created from two network adapters), is it possible to separate networks for
VM management, live migrate and VM public networks using any mechanism, say by creating VLANs? I am having two 10G adapters in each of the VM server
and would like to separate traffic of each of these networks. Thanks in advance.

Hi,
10G adapter is the best NIC performance so with two NICs like this, i recommand you to use the bond0 (mode 1) for fault tolerance and use the VLAN technology to separate the Networks.
Note that Oracle VM support the VLAN configuration.
I hope this can help you
Best Regards

How 2 read two files from 2 diff. directories, using single adapter

How 2 read two files from 2 diff. directories in same system, using single file adapter.

you can use advanced selection for source file
see
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm

Can we use single DB Adapter for multiple tables

Hi,
I have 3 tables. ONE is the Master table and other 2 tables having Primary and foreign key relationships with the Master Table.
Data is enter in the Tables 2 & 3 (based on Master Table Primary key)
I have to use a DB Adapter in BPEL Process which will be in Transaction (what type of Transaction is Best in such a Scenario).
- How do i implement it in BPEL.
- Can i use a Single DB Adapter for Multiple Tables ? (*Views* should not be created for tables 1, 2 & 3),
as we want to avoid using multiple DB Adapters, as in future Tables may increase or decrease...
- while in Transaction if Table 2 fails in Inserting / Updating, it should roll back on error and also if Table 3 fails in Inserting / Updating, it should roll back table 2 and Table 3.
- how access to concurrent users is maintained / managed in such a scenarios.
But everything should be done using Single DB Adapter without creating a separate view.
Is this Possible in BPEL..
If not, How do we design, Implementation such a BPEL Process in Transaction with a best in Performance (both BPEL Process & DB Resources)
thanks in advance
thanks & regards,
anvv sharma

Hi,
Thanks for your quick response.
I have few quires.
If we use PL/SQL, how do we implement transaction and Exception Handling appropriately based on the Error / Exception in BPEL.
If the Table 2 or Table 3 gives out Error / Exception, i have to handle it separately and intimate accordingly.
Suppose, if Table 2 got Error / Exception - Error Handling would be 'Roll back due to error in Table2'
Thanks & regads,

RE: Accessing multiple Env from single Client-PC

Look in the "System Management Guide" under connected environments page
72. This will allow services in your primary environment to find
services in your connected environment. However, there is a bug
reported on this feature which is fixed in 2F4 for the HP and H1 for all
other servers. The following is from Forte:
The connected environments bug that was fixed in 2F4 is #24282. The
problem
was in the nodemgr/name server source code and caused the following to
occur:
Service1 is in connected envs A and B.
Client has env A as primary, B as secondary.
Envmgr A dies before the client has ever made a call to Service1.
Afer env A is gone, client makes a call to Service1 which causes Envmgr
B to
seg fault.
You should upgrade your node manager/env manager nodes to 2F4. The 2F2
development and runtime clients are fully compatible with 2F4 servers.
Kal Inman
Andersen Windows
From: Inho Choi[SMTP:[email protected]]
Sent: Monday, April 21, 1997 2:04 AM
To: [email protected]
Subject: Accessing multiple Env from single Client-PC
Hi, All!
Is there anybody has any idea to access multiple environments from
single client-PC? I have to have multiple environments because each
environment resides geographically remote node and network bandwidth,
reliability are not good enough to include all the systems into single
environment.
Using Control Panel for doing this is not easy for those who are not
familiar with Windows. The end-user tend to use just single application
to access all necessary services.
I could consider two option to doing this:
1. Make some DOS batch command file to switch different environment
like, copying back/forward between environment repositories and
set up forte.ini for changing FORTE_NS_ADDRESS. After then, invoke
proper client partition(ftexec).
2. Duplicate necessary services among each environment.
But, these two options have many drawbacks in terms of system
management(option 1), performance(option 2) and others.
Has anybody good idea to implement this? Any suggestion would be
appreciated.
Inho Choi, Daou Tech., Inc.
email: [email protected]
phone: +82-2-3450-4696

Look in the "System Management Guide" under connected environments page
72. This will allow services in your primary environment to find
services in your connected environment. However, there is a bug
reported on this feature which is fixed in 2F4 for the HP and H1 for all
other servers. The following is from Forte:
The connected environments bug that was fixed in 2F4 is #24282. The
problem
was in the nodemgr/name server source code and caused the following to
occur:
Service1 is in connected envs A and B.
Client has env A as primary, B as secondary.
Envmgr A dies before the client has ever made a call to Service1.
Afer env A is gone, client makes a call to Service1 which causes Envmgr
B to
seg fault.
You should upgrade your node manager/env manager nodes to 2F4. The 2F2
development and runtime clients are fully compatible with 2F4 servers.
Kal Inman
Andersen Windows
From: Inho Choi[SMTP:[email protected]]
Sent: Monday, April 21, 1997 2:04 AM
To: [email protected]
Subject: Accessing multiple Env from single Client-PC
Hi, All!
Is there anybody has any idea to access multiple environments from
single client-PC? I have to have multiple environments because each
environment resides geographically remote node and network bandwidth,
reliability are not good enough to include all the systems into single
environment.
Using Control Panel for doing this is not easy for those who are not
familiar with Windows. The end-user tend to use just single application
to access all necessary services.
I could consider two option to doing this:
1. Make some DOS batch command file to switch different environment
like, copying back/forward between environment repositories and
set up forte.ini for changing FORTE_NS_ADDRESS. After then, invoke
proper client partition(ftexec).
2. Duplicate necessary services among each environment.
But, these two options have many drawbacks in terms of system
management(option 1), performance(option 2) and others.
Has anybody good idea to implement this? Any suggestion would be
appreciated.
Inho Choi, Daou Tech., Inc.
email: [email protected]
phone: +82-2-3450-4696

Accessing multiple Env from single Client-PC

Hi, All!
Is there anybody has any idea to access multiple environments from
single client-PC? I have to have multiple environments because each
environment resides geographically remote node and network bandwidth,
reliability are not good enough to include all the systems into single
environment.
Using Control Panel for doing this is not easy for those who are not
familiar with Windows. The end-user tend to use just single application
to access all necessary services.
I could consider two option to doing this:
1. Make some DOS batch command file to switch different environment
like, copying back/forward between environment repositories and
set up forte.ini for changing FORTE_NS_ADDRESS. After then, invoke
proper client partition(ftexec).
2. Duplicate necessary services among each environment.
But, these two options have many drawbacks in terms of system
management(option 1), performance(option 2) and others.
Has anybody good idea to implement this? Any suggestion would be
appreciated.
Inho Choi, Daou Tech., Inc.
email: [email protected]
phone: +82-2-3450-4696

Hi, All!
Is there anybody has any idea to access multiple environments from
single client-PC? I have to have multiple environments because each
environment resides geographically remote node and network bandwidth,
reliability are not good enough to include all the systems into single
environment.
Using Control Panel for doing this is not easy for those who are not
familiar with Windows. The end-user tend to use just single application
to access all necessary services.
I could consider two option to doing this:
1. Make some DOS batch command file to switch different environment
like, copying back/forward between environment repositories and
set up forte.ini for changing FORTE_NS_ADDRESS. After then, invoke
proper client partition(ftexec).
2. Duplicate necessary services among each environment.
But, these two options have many drawbacks in terms of system
management(option 1), performance(option 2) and others.
Has anybody good idea to implement this? Any suggestion would be
appreciated.
Inho Choi, Daou Tech., Inc.
email: [email protected]
phone: +82-2-3450-4696

How to Create a Flat File using FTP/File Adapter

Can any body done workaround on creating the Flat file using FTP/File Adapter?.
I need to create a simple FlatFile either using of delimiter/Fixed length. using the above said adapters we can create XML file, i tried concatinating all the values into a single String and writing into a file, but it does not have proper structure
Can any body help me out on this..
Thanks
Ram

You can create a text schema while creating a File Adapter. If schema is specified for File Adapter, it takes care of converting XML into fixed length or delimited format.
Thanks,
-Ng.

Cannot process a Fixed Field Length file using the File Adapter (Sender)

Hi -
I have checked throughout these posts and blogs but I still have not been able to find a solution to my issue. When using the File Adapter (Sender) I get a Conversion initialization failed with "xml.keyfieldName", no value found. Why would I require a key field when I am using fixed field lenghts? The file is comprised of 2 structures - 1 header and multiple details (see below). There are no key fields in the flat file that I would be able to use. Any suggestions?
011000390      Customer Americas        20080605164317 000000000000000800000008000000000016000000
12345678          100500       100500       Supplier 1                         0000000000030000002008040400
12345678          100501       100501       Supplier 2                         0000000000052000002008042100
The File Adapter is configured as follows:
Document Name = Rfchke00
Document Namespace = 'my namespace'
Recordset Name = Rfchke00
Recordset Structure = Dtachkh,1,Dtachkp,*
Recordset Sequence = Ascending
Recordsets per Message = 1
Key Field Type = String (Case-Sensitive)
Dtachkh.fieldFixedLengths = 15,25,8,6,1,8,8,8,15,3,31
Dtachkh.fieldNames = F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11
Dtachkh.processFieldNames = fromConfiguration
Dtachkp,fieldFixedLengths = 18,13,13,35,15,3,8,2,21
Dtachkp,fieldNames = F1,F2,F3,F4,F5,F6,F7,F8,F9
Dtachkp,processFieldNames = fromConfiguration
Thanks,
Dave

Hi,
you can use the module from which u can convert your structure to
H011000390 Customer Americas 20080605164317 000000000000000800000008000000000016000000
D12345678 100500 100500 Supplier 1 0000000000030000002008040400
D12345678 100501 100501 Supplier 2 0000000000052000002008042100
Please note the extra H,D in the struture added by the module.
You can then use them as your key fieldValues.. The module should be deployed in Visual Admin and then can be used in the Module tab of your adapter CC
While writing the content conversion after that please dont forget about the added new characters
Please note also that i can find that the word supplier kept repeating in all the Dtachkp records
Please use that
Also if you feel that the field is of 13 characters and that would cause a problem dont worry... create a dummy field eg split tht 13 to two fields and use the common one as key field Value and identifier... as i see in ure case its like 500 Supplier , 502 Supplier . u can split the first 4 char and the remaing 9 char are key field value.
try this out
Rgds
Aditya

Process multi-record & multi-record-format files using ESB & File Adapter

I am looking to process/parse an in-bound file with the following make-up and to load into a database table using the File Adapter, ESB and DB Adapter.
File Make-Up:
- each line in the file is a record
- each record is made up of 12 fields
- there are multiple record types denoted by the first field in the line
- record types may or may not have common fields
- where there are common fields, the field may be in different columns
- each record is to be inserted into a database table
Sample File:
3,,"03-0243-0188132-00",.20,26,075,"","000000006026","","","22/04/08",03 1303
3,,"03-0243-0188132-00",20.00,26,075,"","","","","22/04/08",03 0579
5,,"03-0243-0188132-00",99.60,,,"OPENING BALA",,,"ACME GROUP","22/04/08",
6,,"03-0243-0188132-00",99.60,,,"CLOSING BALA",,,"ACME GROUP","22/04/08",
8,,"03-0243-0188132-00",-346119.05,16,000,"DEBITS",,,,"22/04/08",
8,,"03-0243-0188132-00",346119.05,349,050,"CREDITS",,,,"22/04/08",
9,,"03-0243-0188132-00",-346119.05,16,000,"DEBITS",,,,"22/04/08",
9,,"03-0243-0188132-00",346119.05,349,050,"CREDITS",,,,"22/04/08",
Record Types and corresponding format:
3, Corp ID, A/C Number, Trans Amt, Serial Number, Trans Code, Particulars, Analysis Code, Reference, Other Party Name, Transaction Date, Originating Bank
5, Corp ID, A/C Number, Opening Balance, Serial Number, Trans Code, Particulars, Analysis Code, Reference, Other Party Name, Transaction Date, Originating Bank
6, Corp ID, A/C Number, Closing Balance, Serial Number, Trans Code, Particulars, Analysis Code, Reference, Other Party Name, Transaction Date, Originating Bank
8, Corp ID, A/C Number, Amount, Number, 000, “DEBITS”, Analysis Code, Reference, Other Party Name, Transaction Date, Originating Bank
8, Corp ID, A/C Number, Amount, Number, 050, “CREDITS”, Analysis Code, Reference, Other Party Name, Transaction Date, Originating Bank
9, Corp ID, A/C Number, Amount, Number, 000, “DEBITS”, Analysis Code, Reference, Other Party Name, Transaction Date, Originating Bank
9, Corp ID, A/C Number, Amount, Number, 050, “CREDITS”, Analysis Code, Reference, Other Party Name, Transaction Date, Originating Bank
Please note that record types 8 and 9 have 2 fixed fields.
I have tried playing around with the File Adapter and the ESB but not having much luck. Can someone provide any suggestions on how I can handle this?

James,
Thanks for your prompt response. I have come across your post previously.
Please excuse my in-experience (very new to SOA and Oracle SOA Suite) but i have not understood how your post regarding the manual creation of an XSD will assist with my problem. Could you possibly further elaborate on the overall approach i should be taking?
Regards,
Simon

Security issues when using the file adapter

I want to use the file adapter, and in the documentation it states that you can use "directories" and "ftp".
I want to transfer a file secure and both of these options are not really secure.
Directory reading is not really secure when you read files from a windows share (SMB protocol).
Is it possible to make a share more secure in a windows environment?
In an ftp session everybody can steal the password. Is there a possibility to use "sftp"? Or will this be available?

Currently we dont have, but we will have it soon.

Accessing multiple directories using single file adapter

Similar Messages

Maybe you are looking for