Accessing Payload of completed messages in XI

Hi,
Is there a way to access the payload of a message (errorred out or succeeded) from XI if the message id is known.
PS:please leave out RWB and sxi_monitor transactions. i would like to access these payload in XI mapping.
Thanks and Regards,
Sundararamaprasad.

Hi,
i guess you are not clear with my question. i would like to access the payload of someother completed messages.
For example consider you run 5 file to file scenarios. now if i want to access the payload of one of these messges after all these messages have been processed, how can i do it in XI mapping.
Regards,
Sundararamaprasad

Similar Messages

An Attachement for the payload of the message monitoring.

Hello ,
From the forum links, I found that to access a message payload for the message monitoring, we need to call cl_xms_persist->read_msg_all.
and the export parameter would give the payload message as an attachment.

But when I tried to find if there is any attachment with the messages I dont see them (size comes with the value 0).
 CALL METHOD ex_message->numberofattachments
 RECEIVING
 size = size.

Is there any other option available to get a payload for the message?
Thanks a lot.

Hi Arjun,
 You can see your payload in Tcode SXMB_MONI
 SXMB_MONI-->
 MONITOR FOR PROCESSED XML MESSAGES-->
 click F8 (if required change the date of execution from to select specific message on date range)-->
 Double click on the right most 3D button type of box before the flag icon,
Now you will be able to see the Different pipeline Execution steps(7 Steps) that Your message has under gone .Click on any one of them and see your payload in payload folder at each and every step.This helps us in understanding the way your message is undergoing transformations through out its journey from sender to receiver.
VIRTUAL RECIVER..Is actually a part of an annonymous and adressable unit like service to simulate the receiver that is participating in B2B communication.Its jus a mandatory parameter that has to be mntione din Receiver deternination when We test our B2B scenarios using this option in ID part of PI/XI.
Thanks,
Ram.

"...wizard was interrupted before Palm desktop by Access could be completely installed..."

When I attempt to install Palm Desktop 6.2 by running PalmDesktopWin62.exe everything seems to go fine until the "Configuring Registry" starts. Then I get a Microsoft Windows message that says: "... The wizard was interrupted before Palm desktop by Access could be completely installed. ...". Then the installation stops and the installation does not happen.
If it matters I'm using Windows Vista Home Premium. And before I attempted the installation, I: uninstalled my previous versions of the Palm Desktop using the uninstall feature from the CD installation disk, deactivated my virus protection, shut down Windows Defender, and set the PalmDesktopWin62.exe compatibility mode to the "Windows XP (Service Pack 2)" option.
Does anybody know how to fix this problem?
Post relates to: Palm Z22
This question was solved.
View Solution.

Have you tried just running it "normally"? How about disabling your AntiVirus software temporarily during the installation?
At this point you may need to do a "Clean Uninstall" and some registry edits before trying again:
http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=43307&jump=true
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

TS3297 "Your Purchase Could Not be Completed" message when in-app purchase

When I try to buy in-app purchase, I see "Your Purchase Could Not be Completed" message.
I know I failed twice when submit security questions but how can I reset?

Hello k_chinami,
If you have access to the e-mail address associated with your Apple ID, you can use it to reset your password.
If you have access to the email addresses associated with your Apple ID
Go to My Apple ID (appleid.apple.com).
Click "Reset your password."
Enter your Apple ID and click Next.
Select "Email authentication" as your authentication method. Click Next.
Apple will send a message to the primary email address or verified rescue email address associated with your Apple ID. Open the message and click "Reset Apple ID password".
When the My Apple ID page opens, enter and confirm your new password, then click Reset Password.
Apple ID: If you forget your password
http://support.apple.com/kb/HT5787
Cheers,
Allen

HT204380 I can't access my FaceTime and messages through my iPod touch, I need help please!!!

I can't access my FaceTime and messages through my iPod touch, I need help please!!!

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
You posted in the iPad forum instead of the iPod forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
 Cheers, Tom

I saved a spreadsheet to iCloud now I can not access it. The message I get say I need a newer version of Numbers but I already have it. How do I get access to my document on iCloud?

I saved a spreadsheet to iCloud now I can not access it. The message I get says I need a newer version of Numbers but I already have it. How do I get access to my document on iCloud?

Please see this user tip:
Need newer version of Numbers to open file

My iPhone 6plus will no longer connect to my Dodge UConnect system. Phone calls get a beep "phone call completed" message. Music will play though. Just can't make calls. Tried turning off iCloud and repairing but nothing works. It did work a few days

My iPhone 6plus will no longer connect to my Dodge UConnect system. Phone calls get a beep "phone call completed" message. Music will play though. Just can't make calls. Tried turning off iCloud and repairing but nothing works. It did work a few days

Hi Jpcbew,
The article linked below provides a lot of great information and troubleshooting tips that can help you resolve the issue with your iPhone 6 Plus connecting to you car stereo system.
Get help using your iPhone, iPad, or iPod touch with your car stereo - Apple Support
So long,
-Jason

How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

Screenshot of how it looks when i try to show a ms access form inside a iframe:
http://oi58.tinypic.com/2vj4ish.jpg

Mac won't update software or access iTunes shop. Message comes up with 'not connected to the net. Check connections' error. I still have internet access. Changed my Apple ID but no result. Repaired permissions and re-installed operating system.

Mac won't update software or access iTunes shop. Message comes up with 'not connected to the net. Check connections' error. I still have internet access. Changed my Apple ID but no result. Repaired permissions and re-installed operating system.

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

BEA-101083 Connection failure.java.io.IOException: A complete message could not be read on socket: 'weblogic.servlet.internal.MuxableSocketHTTP@16907c at weblogic.socket.SocketMuxer$TimeoutTrigger.trigger

While trying to publish mesaage by MQ 5.3 .I got the following error
 Please help.
 <Error> <HTTP> <BEA-101083> <Connection failure.
 java.io.IOException: A complete message could not be read on socket: 'weblogic.servlet.internal.MuxableSocketHTTP@1c94ff
 3 - idle timeout: '30000' ms, socket timeout: '30000' ms', in the configured timeout period of '60' secs
 at weblogic.socket.SocketMuxer$TimeoutTrigger.trigger(SocketMuxer.java:775)
 at weblogic.time.common.internal.ScheduledTrigger.run(ScheduledTrigger.java:243)
 at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
 at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
 at weblogic.time.common.internal.ScheduledTrigger.executeLocally(ScheduledTrigger.java:229)
 at weblogic.time.common.internal.ScheduledTrigger.execute(ScheduledTrigger.java:223)
 at weblogic.time.server.ScheduledTrigger.execute(ScheduledTrigger.java:49)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)


Can you help me ? I have the same problem.

Java.io.IOException: A complete message could not be read on socket

Hell All , Am gettign this issue very frequently .. From my googling i see that this can be because weblgic server was not able to do an IO operation because of time out or may be because of Net work issue ..
I would like to know how this can be fixed
java.io.IOException: A complete message could not be read on socket: 'weblogic.servlet.internal.MuxableSocketHTTP@a7f309 - idle timeout: '30000' ms, socket timeout: '5000' ms', in the configured timeout period of '60' secs

Hi All,
Has anyone got any further information on this problem? I have several instances of the message
###<Dec 13, 2005 2:29:40 PM GMT> <Error> <socket> <finland> <serviceview> <ExecuteThread: '12' for queue: 'default'> <kernel identity> <> <000424> 
java.net.SocketException: Connection refused: Connection refused
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(Unknown Source)
at weblogic.socket.PosixSocketMuxer.readBytesProblem(PosixSocketMuxer.java:898)
at weblogic.socket.PosixSocketMuxer.deliverGoodNews(PosixSocketMuxer.java:782)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:708)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:23)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:234)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:210)
In my wl-domain.log. I have no idea how to solve this? I am running WebLogic 7 SP4 on HP-UX 11.11 with JDK 1.3.1.09.
I note that the release notes for WL7 SP 6 release notes mention MuxableSocketDiscriminator. See link http://e-docs.bea.com/wls/docs70/notes/resolved2.html Is this the problem? Anyone else come accross this and solve it?
Best Regards,
Kevin.
Any help much appreciated. Best Regards, Kevin.

A complete message could not be read on socket

hello to everybody...
I have a client swing application witch call in RMI a stateless ejb deployed on a WeblogicServer 8.1 sp5.
The problem is that when we have a slow net I receive on the client the following Exception.The server don't receive the calling ( otherwise the complete message time out on the server is of 480 seconds ).So I think that I ahve to set a client timeout,but witch?and how?and where?...perhaps the heartbeat timeout?
Going around in the internet forums I have seen that a lot of people have the same people...so if someone could be so kind to help us....I would be very grateful...
thanks for help and sorry for bad english
weblogic.rjvm.PeerGoneException: ; nested exception is:
 java.io.IOException: A complete message could not be read on socket: 'weblogic.rjvm.t3.T3JVMConnection@b01d43', in the configured timeout period of '60' secs
 at weblogic.rjvm.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:108)
 at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:284)
 at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:244)
 at irma.ejb.serviceSessionManager.ServiceSessionManager_b1engw_EOImpl_812_WLStub.getService(Unknown Source)
 at irma.serviceLocator.ResourceLocator.remoteService(ResourceLocator.java:72)

giorgio giustiniani <> writes:
You need to increase the value of CompleteMessageTimeout
andy
hello to everybody...
I have a client swing application witch call in RMI a stateless ejb deployed on a WeblogicServer 8.1 sp5.
The problem is that when we have a slow net I receive on the client the following Exception.The server don't receive the calling ( otherwise the complete message time out on the server is of 480 seconds ).So I think that I ahve to set a client timeout,but witch?and how?and where?...perhaps the heartbeat timeout?
Going around in the internet forums I have seen that a lot of people have the same people...so if someone could be so kind to help us....I would be very grateful...
thanks for help and sorry for bad english
weblogic.rjvm.PeerGoneException: ; nested exception is:
 java.io.IOException: A complete message could not be read on socket: 'weblogic.rjvm.t3.T3JVMConnection@b01d43', in the configured timeout period of '60' secs
 at weblogic.rjvm.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:108)
 at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:284)
 at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:244)
 at irma.ejb.serviceSessionManager.ServiceSessionManager_b1engw_EOImpl_812_WLStub.getService(Unknown Source)
 at irma.serviceLocator.ResourceLocator.remoteService(ResourceLocator.java:72)

How to disable access to internet completely in the jnlp file

Hi All,
Can someone help me in figuring out how to disable access to internet completely in the jnlp file.
To be specific with the scenario if the client does not have the JRE installed, i would like to have it downloaded from the server where application runs instead of going to java.sun.com website which needs internet access.
How can we configure it in such a way that it does not go to internet at all.
Here is the snapshot of my jnlp file
<j2se version="1.5.0+" href="http://java.sun.com/products/autodl/j2se" initial-heap-size="128m" max-heap-size="128m"/>
I tried with the following and still unsuccessful.
<j2se version="1.5.0+" initial-heap-size="128m" max-heap-size="128m"/>
Could not find any useful information in the documentation.

see post from Mike at:
http://forum.java.sun.com/thread.jspa?threadID=704112&messageID=4082098#4082098
for how to set up your own autodownload of jre from within your internet.
/Andy

Unable to read payload from the message object in XI

Hello Guys,
Please help me about my problem in XI version 7.0.im quite new here.
im trying to test my config but error message occured. "Unable to read payload from the message object"
when i checked the comm channel this is the error message :
Error during database connection to the database URL 'jdbc:sqlserver://172.16.40.20:1433;databasename=TRAVEL:SelectMethod=cursor' using the JDBC driver 'com.microsoft.sqlserver.jdbc.SQLServerDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:sqlserver://172.16.40.20:1433;databasename=TRAVEL:SelectMethod=cursor': com.microsoft.sqlserver.jdbc.SQLServerException: Cannot open database "TRAVEL:SelectMethod=cursor" requested by the login. The login failed.'
when i tried my login in sql it works...but in this message the login is failed..what shall i do..
Please advice.
Thanks in advance
aVaDuDz

Hi
Check with the connection string & Authorization of user you have used.
MSSQL string is
jdbc:microsoft:sqlserver://dbhost:1433;databaseName=example;SelectMethod=Cursor
While doing JDBC its good to refer Note 831162 lot of problems can be resolved.
Thanks
Gaurav

HT2500 After my last software update I can no longer access my mail. message displayed says "you have mail version 4.5 this cannot be used on Mac OS X Version 10.6.8 . How do I fix this???

After my last software update I can no longer access my mail. message displayed says "you have mail version 4.5 this cannot be used on Mac OS X Version 10.6.8 . How do I fix this???

See possible fixes here.
https://discussions.apple.com/message/19760703#19760703
https://discussions.apple.com/thread/4311280?tstart=0
https://discussions.apple.com/message/19710911#19710911
Some have reported success simply by reinstalling the update.
http://support.apple.com/kb/DL1586
Or download and apply, or reapply, the 10.6.8 Combo update first, then apply the Security Update again.
http://support.apple.com/kb/DL1399
I'd suggest starting with the simplest of these fixes, so look them over first.

Accessing Payload of completed messages in XI

Similar Messages

Maybe you are looking for