Accessing quick camera from iOS5

I can't access the quick camera from my lock screen with the new iOS5 software on my iPhone 4.

From the lock screen, double tap the Home button. The camera icon should appear.

Similar Messages

  • After updating my iphone 4 to IOS 5 should I be able to access the camera from the lock screen, or is tis only available with iPhone 4g?

    after updating my iphone 4 to iOS5, shouldn't I be able to access the camera from the lock-screen, or is this just an iPhone 4s feature?

    jmph wrote:
    Double pressing the Home button displays the Camera button.  However after the phone goes to sleep and is awakened the Camera button isn't there.  A double press brings it back.  Is there a way to make it stay there?
    No, you will have to double press each time on the lock screen to bring back the camera button.

  • I recently synced my iphone4 on my iMac, but now I can't access my camera from the lock screen? It shows up but it doesn't open the camera? Does anyone know how to fix this? Thanks!

    I recently synced my iphone4 on my iMac, but now I can't access my camera from the lock screen? It shows up but it doesn't open the camera? Does anyone know how to fix this? Thanks!

    Can't believe it was that easy... I'm so dumb! Thanks for your help, I was getting so aggravated! I owe you... Thanks again!

  • Accessing iPad camera from within DPS application

    I have a potential client who asked me if it were possible to access the camera from within a DPS application. I have no further information at this point regarding what the reason for it will be but thought I'd shoot the question out anyway. Apparently it is possible in iOS 6 to access the camera in mobile Safari but I don't know if that is of any help.
    Thoughts? Thanks!
    :jaj

    See http://forums.adobe.com/message/5040166#5040166.
    Neil

  • I have upgraded my iPhone to iOS 5.1 and now cannot access the camera from a locked screen.  Has anyone else had this problem?

    I have upgraded my iPhone 4S to iOS 5.1 and now cannot access the camera from a locked screen.  Anyone have any suggestions?

    From the lock screen, to access the camera you touch the camera icon and slide in an upward motion. It no longer takes a tap to get it to open.

  • Why no access the camera from the lockscreen on iPad 2?

    Yesturday, I upgraded my iPad 2 to iOS 5 and I love the new camera features like I can use the Volume up button to take a photo, and I can edit photos meaning that I don't have to use Adobe Photoshop express anymore. The only problem is, unfortunetly on my iPad 2, I don't have access to the camera from the lock screen even if I double clicked the home button. Why dosen't the iPad 2 have that? why didn't they put that in? That is one of the features I really wanted to see. The original iPad, of course had no cameras, so you woudn't expect that feature. They put that feature in iPhones 3GS+, and iPod Touch 4, so why not the iPad 2?

    It seems pretty weird how some people aren't getting access the camera right from the lock screen with iOS 5 with your iPhone because they added that feature for the iPhone. I got a white iPod Touch a few days ago and I have access to the camera right from the lock screen. So, hopefully the problem will be fixed and the camera from lock screen feature will be added when iOS 5.0.1 is released.

  • Why are my photos smaller when I access the camera from the lock screen?

    I have an iPhone 4s using IOS 5 and I have noticed that when I access my iPhone camera from the lock screen (by double clicking the home button) that the photos I take are only 640 x 480 pixels, but when I unlock the phone and click the Camera icon the photos 3264 x 2448 pixels.  I would pefer to always shoot the larger sized photos.  Is there a way to change this?

    Are you travelling towards the object you are photographing at a spectacular speed?  If so, you may be experiencing the doppler effect!

  • How to access Integrated camera from Windows 7 - ThinkPad X301?

    Could someone please tell me how to start the integrated camera after installing the driver in Windows 7? I could see the device driver from Device Manager stated that it is properly installed and working fine but I had gone all the program interface to see where to start it proves to no avail. It is unlike Windows XP where it can be accessed from Accessories.

    Hi and welcome to the forum jaaj!
    What is the 7 character product number of your SL500? It looks like 2668-KHU and can be looked up from the back sticker.
    Let us know...
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • Accessing iPhone camera from a Webapp

    Does anyone know whether it's possible to access/control/start iPhone's recorder from Safari?
    Any info is welcome!
    Thanks

    Not without some javascript helper classes. Check out PhoneGap.

  • How do I access a network camera from internet via 501

    Please understand that I am nowhere near being a network guru and I'm even farther away from being a PIX guru.
    I have a 501 PIX between my home network and the outside internet. The PIX is connected to a cable modem and pretty much keeps the same DHCP IP address as assigned by the ISP. I have an AXIS 207 IP camera connected to my home network on IP 192.168.1.11. For the sake of illustration say the address assigned by my cable ISP is 123.123.123.1.
    What I need to do is to access the camera from the internet. To do that I suppose I need to add some instructions to the PIX configuration but I don't know where to start...I have never even thought about communicating with devices on my home network through the internet. Can someone please provide some pointers or better yet the commands I need to add. The next question is how do I access the camera assuming the PIX is all set up. I don't think I use the camera's address and I don't know how the ISP address would get to a specific device such as the camera - maybe appending a port number or whatever to the IP address I type when trying to access the camera from the internet?
    The way the camera works on the internal network is you type in it's IP address in a browser window and the camera opens up a web page just like any url and the video is streamed to a window in the web page.
    I hope I've provided enough info to understand what I'm trying to do and I would be most appreciative for any help.
    thanks

    I tried installing the commands as provided but am running into issues. Here are the error messages:
    pixfirewall(config)# nat (inside) 1 0.0.0.0
    ERROR: Duplicate NAT entry
    ERROR: fail to insert nat entry
    pixfirewall(config)# global (outside) 1 xxx.xxx.114.55
    ERROR: xxx.xxx.114.55-xxx.xxx.114.55 overlaps with outside interface address
    pixfirewall(config)#
    And here is a copy of my current configuration (including the code prior to entering the changes and the successful changes). Any Idea what needs to be done to fix things?
    thanks
    Building configuration...
    : Saved
    PIX Version 6.3(5)
    interface ethernet0 auto
    interface ethernet1 100full
    nameif ethernet0 outside security0
    nameif ethernet1 inside security100
    enable password xxx
    passwd xxx
    hostname pixfirewall
    domain-name ciscopix.com
    clock timezone CST -6
    clock summer-time CDT recurring
    fixup protocol dns maximum-length 512
    fixup protocol ftp 21
    fixup protocol h323 h225 1720
    fixup protocol h323 ras 1718-1719
    fixup protocol http 80
    fixup protocol rsh 514
    fixup protocol rtsp 554
    fixup protocol sip 5060
    fixup protocol sip udp 5060
    fixup protocol skinny 2000
    fixup protocol smtp 25
    fixup protocol sqlnet 1521
    fixup protocol tftp 69
    names
    access-list 100 permit icmp any any echo-reply
    access-list 100 permit icmp any any time-exceeded
    access-list 100 permit icmp any any unreachable
    access-list inbound permit tcp any host xxx.xxx.114.55 eq www
    pager lines 24
    logging timestamp
    logging trap informational
    logging host inside 192.168.1.3
    icmp deny any echo outside
    mtu outside 1500
    mtu inside 1500
    ip address outside dhcp setroute
    ip address inside 192.168.1.1 255.255.255.0
    ip audit info action alarm
    ip audit attack action alarm
    pdm location 192.168.1.3 255.255.255.255 inside
    pdm history enable
    arp timeout 14400
    global (outside) 1 interface
    nat (inside) 1 0.0.0.0 0.0.0.0 0 0
    static (inside,outside) tcp xxx.xxx.114.55 www 192.168.1.11 www netmask 255.255.255.255 0 0
    access-group inbound in interface outside
    timeout xlate 0:05:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
    timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
    timeout sip-disconnect 0:02:00 sip-invite 0:03:00
    timeout uauth 0:05:00 absolute
    aaa-server TACACS+ protocol tacacs+
    aaa-server TACACS+ max-failed-attempts 3
    aaa-server TACACS+ deadtime 10
    aaa-server RADIUS protocol radius
    aaa-server RADIUS max-failed-attempts 3
    aaa-server RADIUS deadtime 10
    aaa-server LOCAL protocol local
    aaa authentication http console LOCAL
    aaa authentication telnet console LOCAL
    aaa authentication serial console LOCAL
    aaa authentication enable console LOCAL
    http server enable
    http 192.168.1.0 255.255.255.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server community public
    no snmp-server enable traps
    floodguard enable
    telnet 192.168.1.0 255.255.255.0 inside
    telnet timeout 15
    ssh timeout 5
    console timeout 0
    dhcpd address 192.168.1.6-192.168.1.10 inside
    dhcpd dns 207.69.188.171 207.69.188.172
    dhcpd lease 3600
    dhcpd ping_timeout 750
    dhcpd auto_config outside
    dhcpd enable inside
    username administrator password xxx privilege 15
    terminal width 80
    Cryptochecksum:xxx
    : end
    [OK]

  • New Camera from Lock Screen feature makes passcode unecessry!!!

    Anyone else notice that when you access the camera from the lock screen that if you then hit the home button you are not required to enter your passcode.  Major security issue there!!!

    That's because the phone is not in lock mode, set the settings to ask the password after two minutes, then leave it alone for 3 minutes ( you can do it!!!); then try it!!!

  • Can you restrict some applications access to camera?

    The new version of Facebook allows direct access to camera from Chat and Message. In restrictions we have locked down photos on facebook but now this doesn't stop daughter sending photos to other people.
    For the time being we've turned off the camera on the phone, but is there a way to restrict the applications that can access the camera?

    Hello gbelton10. Welcome to the Apple Discussion!
    Is this even possible?
    Sorry, but no. Unlike some other manufacturer's routers, the AirPort & Time Capsule do not provide this type of feature. One workaround is to use OpenDNS to filter the types of websites that can be accessed.

  • IPhone 6 Camera from lock screen, closes after 1 second...

    When I access the camera from the lock screen, it opens for about one second then just blacks out to a screen off mode. I can still get to camera the long way by unlocking screen and clicking on icon, but want to know why the shortcut from lock screen is buggy. Please advise.

    I'm not sure what you meant with the first part of your reply. However, the reset seems to returned behaviors to normal... so thanks for that.
    Not that it matters much now, but again, the issue was that I wasn't able to go directly into camera mode from Lock Screen... the camera app would appear for one second, then the screen would just go into sleep mode. Unlocking screen with passcode or Touch ID worked fine then opening apps from there all worked fine. Just the camera shortcut from Lock Screen as the issue, but now it is resolved.

  • Cant access security cameras with ea6200 router

    I have everythig hooked up. port forwarding is enabled on port 80. i can only access my cameras from within my network. if i go outside my network i cant get in.
    please help.
    its like i cnt get passed the firewall

    What are things you tried so far in accessing your camera remotely? Have you tried to type your public/WAN ip address and the port number (ex:  http://68.12.123.3:80) on the address bar? Try to verify as well which port is needed for your camera. There might be something else other than 80.

  • Quick Migration from Access fails

    When I try to do a quick migrate from Access to XE it always fails, please help,

    You will need to provide more information.
    What fails? What error message do you get? What version of SQLDeveloper?

Maybe you are looking for