Accidentally wiped wrong disc during backup, can data be recovered?
I was doing a backup prior to bringing in my MacBook Pro and accidentally wiped the wrong external hard drive. Disk tools say it can't be repaired or verified. Is there any way to recover the data?
"Data Rescue II" from prosofteng.com has a free download demo available. You will need to follow/read the directions carefully.
VirtualLab™ Data Recovery has a free download demo available.
DriveSavers Data Recovery is NOT free. However, they have a toll free contact phone #, international phone # & fax contact #'s. Also helpful Recovery Tips and Disaster Recovery for important precautions to prevent further data loss on their website.
http://www.stellarinfo.com
Stellar Phoenix Macintosh -- Mac data-recovery software -- recovers data from damaged, deleted, or corrupted volumes, and even from initialized disks. An exhaustive scan of the drive is performed to locate lost partitions. All found data in the lost partition is then presented in a tree structure so that you can copy your lost files to a working volume.
*FREE* DOWNLOAD DEMO
FileSalvage
**FREE** Download DEMO
Remo Recover
**FREE** DOWNLOAD TRIAL
FILERECOVERY**FREE** DEMO
Similar Messages
-
My iphone synched with a computer and wiped out my contact. can they be recovered?
my iphone synched with a computer and wiped out my contacts. can they be recovered?
Yes, if you still have a backup from the time before this happened, see this article for more info: iPhone and iPod touch: About backups
-
Can data be recovered from a crashed HD?
My friend has an 3rd Gen iMac G5 (iSight) that appears to me the HD is out of. I can boot up with an external HD and go to Disk Utility and the internal HD does not show up. I tried resetting SMU and PRAM and other things before that with no luck. If the internal is indeed shot, can an expert recover anything form it, i.e. photos?
!http://i46.tinypic.com/2nvn6f.gif!
"internal HD does not show up."
Could be a sign of directory damage. The following should be used to repair:
DiskWarrior
Highly recommended for *directory damage* repairs.
TechTool Pro
Multi-functional utility.
Drive Genius Multi-functional utility.
You will need to make your own decision on which to purchase. Read up on them on their websites because each does something a little different.
You must use the versions that are compatible w/your OS system & keep the utilities updated to avoid damaging/harming/trashing your system.
"can an expert recover anything form it, i.e. photos?"
Yes but very expensive. If possible check out the following:
"Data Rescue II" from prosofteng.com has a free download demo available.
You will need to follow/read the directions carefully.
VirtualLab™ Data Recovery has a free download demo available.
DriveSavers Data Recovery is NOT free. However, they have a toll free contact phone #, international phone # & fax contact #'s.
Also helpful Recovery Tips and Disaster Recovery for important precautions to prevent further data loss on their website.
http://www.stellarinfo.com
Stellar Phoenix Macintosh -- Mac data-recovery software -- recovers data from damaged, deleted, or corrupted volumes, and even from initialized disks. An exhaustive scan of the drive is performed to locate lost partitions. All found data in the lost partition is then presented in a tree structure so that you can copy your lost files to a working volume.
FREE DOWNLOAD DEMO
FileSalvage
*FREE* Download DEMO
!http://i50.tinypic.com/izvwo1.gif! -
I accidentally deleted an e-mail. Can it be recovered?
I have not shut down yet so can it be recovered?
Firefox doesn't do email, it's strictly a web browser.
If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
If your problem is with Mozilla Thunderbird, see this forum for support.
[http://www.mozillamessaging.com/en-US/support/] <br />
or this one <br />
[http://forums.mozillazine.org/viewforum.php?f=39] -
Urgent!!! mavericks wiped out my entire backups and data on external devices
I've upgraded to Mavericks recently. It's working fine on my 13-inch retina macbook. I'm currently using 2 external drives for time machine backups and also storing my work related data and iTunes files on these external drives. This morning when I when switched on my macbook strangely it gave me incorrect external drive name. When I looked into the 3TB disk it was blank. I've ejected the drive without writing to it.
Any suggestions or tools to retrieve data wiped in OSX?
My entire music and dvd archive and 20 years of work related data are gone!!!
Thanks in advance.
Sertac OrcunFIrewire & Thunderbolt drives are having issues with Mavericks, avoid same until a fix is issued if you can.
many are reporting same, there is a firewire fault and TB HD on external HD from LaCie (Seagate) and from WD especially.
Technicians are looking into it.
Until there is resolution, consider setting up a USB ext. Time machine HD.
Until then consider confining Mavericks use with USB HD.
Ive tested a very long line of USB HD on Mavericks, all seem fine.
*However some are reporting now even USB HD are having problems IF they are running WD software
Recommend anyone DO NOT ATTACH any WD MyBook externals (firewire, thunderbolt or otherwise).
I dont have same to test, so I dont know if the problem is in the firmware on the SATA bridge or if its a problem with the WD software -
Zeroed drive 4 times - can data be recovered?
Just sold my old g3 clamshell iBook, and I used the disk utility (or something like that) to zero all the data. Because I'm fairly neurotic, I went through that whole process about four times. How easy or hard would it be for the new owner to recover my data if he decides to get snoopy?
Thanks!Thanks -- luckily, the guy who bought my G3 iBook was an innocent looking kid who just seemed genuinely happy to have the computer -- and I'm guessing that by the time he sells it to someone else, all of his data will have filled up the drive further, so I can't see where anyone would be motivated enough to hire a pro to go treasure hunting on the HD.
-
Accidentally cleared Library in iTunes. Can it be recovered?
I accidentally had my library cleared in iTunes and I was wondering if it can be recoverable? All my files are scattered around so it will take time to re-add them. I do have Norton Erase Protection on my Recycle Bin so it would recover any deleted files. Is there any way to restore the library before it was cleared? I have a previous library file from 9/12 when I upgraded first upgraded to iTunes 7 but iTunes will not let me import it saying it is not a valid exported file.
I have always had this exact problem. So annoying. It seems to happen when clicking a song with album art that hasn't been preloaded or something. The artwork seems to lag and suddenly I'm renaming a song. I now have to right click play every song just to avoid screwing around for 5 seconds every time I want to start a song.
Message was edited by: helfon -
Using DVD-R as backup for data
I thought I could use a blank DVD-R disc as backup for data/files, as I've done with blank CD's in the past. However, loading a blank DVD just starts iDVD and I can't figure out how to transfer files, plus there is no disk icon on my desktop. I'm sure this is a real beginner question, but I just got my iMac. Thanks, David
Hi David
First thing you need to do is change your preferences so that the DVD mounts on the desktop. Open System Preferences by click the Apple menu in the top left corner of your screen and selecting "System Preferences..."
The select the CDs & DVDs pane in System Preferences. You can change the "When you insert a blank DVD" option to "Ask what to do". You can now close System Preferences
The computer will then ask what you would like to do when you insert the blank DVD, selecting "Open Finder" will mount the DVD on the desktop.
Hope this helps
J.C -
Accidentally wiped out windows while installing Ubuntu.
Recently I bought a laptop at Best Buy (Lenovo Ideapad N586) and used a upgrade offer to upgrade to Windows 8. Today I installed Ubuntu and intended to dual boot but I screwed up and accidentally wiped the drive during the install. The laptop did not come with any windows disks. Will I have to buy WIndows to reinstall it?
Thanks!SoakingWetScott wrote:
Thanks, but that did not work. When I erased the Hard Drive it must have wiped the recovery partition also, When I press that button, it just boots into Ubuntu.
Hi
As the button is not working and you erased the whole hard drive, then you cannot anyhow revert to the windows 7 without the windows disk. However it is neccessary that you will have to buy disks. As you have ubuntu, you could use it to download windows 7 official iso from my digital life forums and use the product key that is found below your laptop. Link for iso is below
http://www.mydigitallife.info/download-windows-7-iso-official-32-bit-and-64-bit-direct-download-link...
You could either burn a disk of the iso or make a bootable disk/pen drive from it.
Use Windows 7 USB/DVD Download tool to make a dvd/usb of iso. After installing windows then install all the drivers for windows 7, Download below
AudioDriver Operating System Released
Conexant Audio Driver for Microsoft Windows 7 (32-bit, 64-bit) - Ideapad P585, N586 ... Learn more
Version: 8.54.34.0(Smart Audio: 6.0.134.0)(Dolby v7.2.7000.11)
Conexant Audio Driver
Windows 7 32bit
Windows 7 64-bit
04 Jun 2012
Bluetooth and ModemDriver Operating System Released
Bluetooth Driver (Liteon, CyberTan, Foxconn) for Microsoft Windows 7 (32-bit, 64-bit) - Ideapad P585, N586 ... Learn more
Version: 7.3.0.150/6.5.1.2700
Bluetooth Driver (Liteon, CyberTan, Foxconn)
Windows 7 32bit
Windows 7 64-bit
04 Jun 2012
Camera and Card ReaderDriver Operating System Released
Camera Driver (Bison, Chicony) for Microsoft Windows 7 (32-bit, 64-bit) - Ideapad P585, N586 ... Learn more
Version: 1.12.204.1/13.11.1206.1
Camera Driver (Bison, Chicony)
Windows 7 32bit
Windows 7 64-bit
04 Jun 2012
Realtek Card Reader Driver for Microsoft Windows 7 (32-bit, 64-bit) - Ideapad P585, N586 ... Learn more
Version: 6.1.7601.39016
Realtek Card Reader Driver
Windows 7 32bit
Windows 7 64-bit
04 Jun 2012
ChipsetDriver Operating System Released
AMD Chipset Driver/AHCI Driver/USB 3.0 Driver/Graphics Driver for Microsoft Windows 7 (32-bit, 64-bit) - Ideapad P585, N586 ... Learn more
Version: 5.12.0.13/1.0.0.72/8.944.2.1000
AMD Chipset Driver/AHCI Driver/USB 3.0 Driver/Graphics Driver
Windows 7 32bit
Windows 7 64-bit
04 Jun 2012
General InformationDriver Operating System Released
Hotfix for Microsoft Windows 7 (32-bit) - Notebook ... Learn more
Version: KB2482122
Hotfix
Windows 7 32bit
15 Apr 2012
Hotfix for Microsoft Windows 7 (64-bit) - Notebook ... Learn more
Version: KB2482122
Hotfix
Windows 7 64-bit
15 Apr 2012
Networking: EthernetDriver Operating System Released
Realtek LAN Driver for Microsoft Windows 7 (32-bit, 64-bit) - Ideapad P585, N586... Learn more
Version: 7.54.309.2012
Realtek LAN Driver
Windows 7 32bit
Windows 7 64-bit
04 Jun 2012
StorageDriver Operating System Released
AMD Chipset Driver/AHCI Driver/USB 3.0 Driver/Graphics Driver for Microsoft Windows 7 (32-bit, 64-bit) - Ideapad P585, N586 ... Learn more
Version: 5.12.0.13/1.0.0.72/8.944.2.1000
AMD Chipset Driver/AHCI Driver/USB 3.0 Driver/Graphics Driver
Windows 7 32bit
Windows 7 64-bit
04 Jun 2012
TouchpadDriver Operating System Released
TouchPad Driver (Synaptics, ElanTECH, Cpress) for Microsoft Windows 7 (32-bit, 64-bit) - Ideapad P585, N586 ... Learn more
Version: 16.0.5.1/10.4.2.8/2.3.7.25
TouchPad Driver (Synaptics, ElanTECH, Cpress)
Windows 7 32bit
Windows 7 64-bit
04 Jun 2012
USB deviceDriver Operating System Released
AMD Chipset Driver/AHCI Driver/USB 3.0 Driver/Graphics Driver for Microsoft Windows 7 (32-bit, 64-bit) - Ideapad P585, N586 ... Learn more
Version: 5.12.0.13/1.0.0.72/8.944.2.1000
AMD Chipset Driver/AHCI Driver/USB 3.0 Driver/Graphics Driver
Windows 7 32bit
Windows 7 64-bit
04 Jun 2012
VideoDriver Operating System Released
AMD Chipset Driver/AHCI Driver/USB 3.0 Driver/Graphics Driver for Microsoft Windows 7 (32-bit, 64-bit) - Ideapad P585, N586 ... Learn more
Version: 5.12.0.13/1.0.0.72/8.944.2.1000
AMD Chipset Driver/AHCI Driver/USB 3.0 Driver/Graphics Driver
Windows 7 32bit
Windows 7 64-bit
04 Jun 2012
Wireless LANDriver Operating System Released
Wireless LAN Driver (Liteon, CyberTan) for Microsoft Windows 7 (32-bit, 64-bit) - Ideapad P585, N586 ... Learn more
Version: 9.2.0.458/5.100.82.112
Wireless LAN Driver (Liteon, CyberTan)
Windows 7 32bit
Windows 7 64-bit
04 Jun 2012
Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it. -
My girlfriend believes she's wiped out the OS on her iPod 4th generation she said she did this by accidentally rebooting her iPod during an update, and now her iPod just shows the apple logo then fades to white. My question is, can this be fixed? Or is a new iPod necessary??
If you live near an Apple store take it in for diagnosis. Don't forget to make an appointment online first. If you don't live near a store, you may get help by searching "youtube" for DFU Restore ipod. This is not difficult to do but it requires proper timing to get the device into DFU mode.
-
Satellite L350 - Can't install Vista and how can I backup my data?
Hi to all
I have a Satellite L350 and recently I've installed Vista Home Premium in a different language (the OEM Vista was in English) hoping I could activate it with the OEM key, but I didn't succeed.
When I wanted to re-install the OEM Vista from WinRE I realized I can't access it and then I had a "brilliant" idea that if format the C partition with the Acronis Disc Director it would boot from WinRE. It didn't.
Fortunately Ive burned the recovery discs before. The only problem is that the recovery disc formats the entire HDD and I have data on the second partition I've would like to retrieve.
I tried to install again the retail Vista to backup the data from the second partition (yes, I'm an idiot, I didn't do it before) but it stops after the first reboot. I get a black screen with a low dash blinking.
I really need that data, please help!Hi!
I can tell you why you cant install a retail version of Vista by using the product key. This is pretty easy because the key on the bottom side on the notebook belongs to the preinstalled OEM version and cant be used by a retail version.
However, I think the best way to backup your data would be that you put the HDD in an external HDD case and then you can backup your data on another PC or notebook.
Such external HDD cases are not expensive but very useful.
Bye -
I transferred data to my MacBook Pro, then I accidentally did an UNDO and all the data desapeared....What can I do to recover it???
Sorry, but it's probably lost, then, presuming you never made a backup. There's a dim chance that you could recover at least some of the data using a file recovery utility such as Data Rescue from Prosoft Engineering, but the chances aren't good and get lower the more you use your computer.
Regards. -
I'm in cycle mode, and 'merge' is clicked in preferences. However, when I record, my previous track data keeps getting overwritten. Does anyone know what I'm doing wrong. Interestingly, I can still see the data in the region.
jamestait wrote:
when I record, my previous track data keeps getting overwritten.
since you didn't specify, are you recording in a single take?
http://www.bulletsandbones.com/GB/GBFAQ.html#multipassrecording
(Let the page FULLY load. The link to your answer is at the top of your screen) -
TM backup: can I use two drives to back up data on two other drives?
Hi to all!
I have with me a 1 TB/ Thunderbolt EHD [external hard drive], a Lacie 2 TB/FW, EHD, a Seagate 2 TB/ 2 USB, EHD, a Seagate 3 TB/ 2 USB, EHD and [to be purchased] a Seagate 2 TB/ 2 USB, EHD.
I mainly use my Mac for making HD videos using FCPX.
I am planning to use these drives in the following manner as indicated by the table below:
Drive:
a
1 TB,
Thunderbolt,
Buffalo
b
2 TB/ FW
LaCie
c
2 TB/ 2 usb
Seagate
d
3 TB/ 2 usb
Seagate
e
2 TB/ 2 usb
Seagate backup
[to be purchased]
f
500 GB, internal
Macintosh HD
Partitions
1
1
1
2
1
USAGE:
editing videos, one
active project at a time
mainly for camera
archives, music files,
FCP events, projects
and exported movies
same as the LaCie,
as a backup of data
intend to have 2
partitions of 1.5 TB each;
one partition for personal
data and the other partition
to back up data on the
Thunderbolt [current project]
intend to use this for
TM back up of my
Mac's internal HD
applications, documents etc.
backed up by:
one partition of 'd'
by the 2 TB Seagate
backup 'e'
I would like to know whether I could do these things:
Can I use the TM backup feature in this manner of using 2 separate drive/partition [e/d] to back up data on 2 other drives [f and a]?
Further, I am manually copying files from 'b' drive to 'c' drive; without incurring further expense, can I ensure that whatever I write onto the LaCie [b] gets copied to the 'c' drive automatically?
Any thoughts, suggestions and instructions in these matters are welcome.EXT. DRIVES:
a
1 TB
Thunderbolt
b
2 TB/FW
[LaCie]
c
2 TB/ USB
[Seagate]
d
3 TB/USB
[Seagate]
e
2 TB/USB
[Seagate]
USAGE:
scratch disk
[planning to have
only one active
project at a time]
camera footage
FCPX events, projects
and completed movies
Same as the LaCie,
as it's backup
To be used as TM
backup for my Mac's
internal and also to
the scratch disk.
Planning to have it in
2 partitions: to have
a 'secondary' copy of
my Mac's IHD on one
partition and to have
personal 'net retrievable'
data on the other partition.
'MY
OBSERVATIONS'
my projects are usually
less than 10 minutes
and hence I trust that
work would be fast and in
case of drive failure, I
would be losing only
one project.
I am importing camera footage
primarily into this drive and
being FW, data transfer is
fast.
Am manually copying
files from the LaCie
onto this.
This drive is not a
brand new one, but
has been given to me
by the company's
agent as a replacement
to my earlier 2 TB drive
which had failed.Hope
this also will not fail!
Because of the 'uncertain'
performance of the
3 TB Seagate, I intend
to have a copy of my
Mac's IHD in one
partition. I intend to place only
such data upon the other
partition that I will not be
greatly affected should the
drive fail.
If you can analyse this plan and give your insight upon this matter, I will be immensely happy.
Further, if this proposed use of the 3 TB Seagate is okay with you, I need to know how to remove the Thunderbolt from doing it's temporary role of TM backup and how to coronate the 3TB Seagate as its successor.
FYI, I would be switching off TM from functioning whenever I am editing video; I would be switching it on only after a full editing session.
Another question on my mind is this: do I need to partition the drive 'e' at all?
Message was edited by: somanna -
I just accidentally wiped out my entire music library. I sent everything to recycling bin and then immediately hit restore all items as I knew what I had just done. Now I can find where those files went. Is there anyway Apple can just send me my purchased songs again?
See Here > Download Past Purchases
http://support.apple.com/kb/HT2519
Maybe you are looking for
-
Sorting not working if table linked to another table
Got a table with student marks: Table 1 student mark A 98 B 79 C 82 if I copy/paste the marks to another table then sort (ascending, sort by B entire table), it is sorting as expected: Table 2 student Mark B 79 C 82 A 98 if instead I go in Table 2 an
-
In the process of updating Adobe Flash, Firefox froze. It registers as being open, and none of the fixes I've tried will work as long as it's open, but I can't close it. Even when I click on the Firefox icon, the Firefox menu bar doesn't appear. No F
-
How to remove Special characters in XSLT
Hi I have one issue in XSLT transformation,in my input xml I have the < and > symbols but while in response it is coming as < due to this we lose some data . so is there any functions to get the symbols. Regards Mani
-
Pacman -Syu - show which repo the updates are in + current versions?
Hi, I couldn't find a way (other then write shell script workarounds ;-) ) to show this additional information: - the repository the update is in - the current installed version of the package dieter@dieter-ws ~ $sudo pacman -Syu Targets (4): abiword
-
I try to run select statement on wwsbr_all_items or try to run the api package, but it always show the following error ORA-14551: cannot perform a DML operation inside a query ORA-06510: PL/SQL: unhandled user-defined exception ORA-06512: at "PORTAL.