Accordion Menu does not do proper job
I am using an accordion menu to select data to display on a line chart. I manipulate some data with a spinner and the graph on the line chart does not change. If I move up a label and move down again then the graph has changed.
If I replace the accordion menu with a list box, I am able to see changes on the line chart dynamicall when I increase or decrease values with the spinner. Thoughts? Many thanks!
Anil,
the source data area contains calculations that can be manipulated by the values entered in the spinner. Example: Some cells contain a conversion factor and other cells contain a simple weighting factor. The weighting and the conversion factor are incremented or decreased by the values in the spinner.
Once this calculation is done I expect the accordion menu to write the data into row x again so that the update is displayed in the line chart. If you use a list box instead of an accordion menu it works and the line chart is updated every time I change the value in the spinner.
In the accordion case it does not seem to be the case. When I change the spinner value I have to select another label and go back again to see the changes. I assume that the accordion menu then has written new values in row x.
Does that make any sense? Regards, Frank
Similar Messages
-
Project settings menu does not appear
Running OS 10.9.5 and iMovie 10.0.5 on a macbook pro.
I'm trying to set the aspect ratio of my project. I have seen several docs and threads that say I should click File->Project Settings and the project settings menu will come up. However, I can't find that. The file menu does not contain Project Settings or anything like that. Neither do the other pull down menus.
I have also seen threads describing how when I create a new project (trailer or movie) and there is supposed to be point at which I can select the aspect ratio. Nope, don't see that either. For example, when I click the big "+" that is used to create a project, I get to choose between a trailer and a movie, then I get to choose a theme, then it asks for a name and I click OK and that's it.
I have also used Command-J, which is supposed to bring up the properties menu. That does give me the movie properties, but there is no place to choose an aspect ratio. I get the same results, or lack thereof, when I do Window->Move Properties (not surprising since command-J is the short cut key for this).
Question -- is this supposed to work with 10.0.5? I have tried to find a later version of iMovie but the only one I found on the apple store site was 10.0.6.
Any ideas?????I have finally found where it is stated that iMovie 10 does not support project properties or changing the aspect ratio.
I love Apple and would never consider switching to a PD, but really, folks, this is just a plain dumb decision on Apple's part and IMHO reflects the continuing siphoning of quality resources from OS-X/laptops/desktops to iPhone and other gadgets. yuck.
consider this discussion closed (I don't know how to close it) and I will fire up my old iMini that has OS 10.6 on it and see if I can get the job done there.
yuck. -
I am trying to use Facetime and it says my devise does not have proper credentials??
I am trying to use Facetime and it says my devise does not have proper credentials. What does this mean? I have used it in the past.
While we all have MacBooks in this forum not all of us use FaceTime. There's a FaceTime Support Community where everybody uses FaceTime. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/mac_app_store/facetime_for_mac
-
Folks,
Hello.
I am installing PeopleTools 8.53 with Oracle Database Server 11gR1 and OS Oracle Linux 5.10.
Data Mover Bootstrap and Application Designer can log into Database instance successfully. My procedure to run PIA is below:
Step 1: start Oracle Database Server and LISTENR is listening.
Step 2: start Application Server ./psadmin and 8 processes are started.
Step 3: start WebLogic Server PIA /opt/PT8.53/webserv/PT853/bin/startPIA.sh
In Browser, http://192.168.196.102:8000/ps/signon.html comes up successfully. But when sign in using UserID PSADMIN and password "myname", I get the error message in Browser as below:
The application server is down at this time.
CHECK APPSERVER LOGS. THE SITE BOOTED WITH INTERNAL DEFAULT SETTINGS, BECAUSE OF: bea.jolt.ServiceException: Invalid Session
We've detected that your operating system is not supported by this website. For best results, use one of the following operating systems:
Mac OS X 10.6(Snow Leopard)
Mac OS X 10.5(Leopard)
iPad
Oracle Linux Enterprise
Mac OS X 10.4(Tiger)
Windows 8
Windows 7
Mac OS X 10.7(Lion)
Regarding Application Designer, both Database Type "Oracle" and Connection Type "Application Server", UserID "PSADMIN" and password "myname" login successfully. I view TUXLOG (current Tuxedo log file) and its last screen is below:
191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
I View APPSRV_1023.LOG (current server log file) and its content is below:
PSADMIN.32259 (0) [2013-10-23T18:55:12.134](0) Begin boot attempt on domain PT853
PSAPPSRV.32290 (0) [2013-10-23T18:55:35.701](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/1
PSAPPSRV.32290 (0) [2013-10-23T18:55:35.923](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_1/
PSAPPSRV.32290 (0) [2013-10-23T18:56:19.256](2) App server host time skew is DB+00:00:00 (ORACLE PT853)
PSAPPSRV.32290 (0) [2013-10-23T18:56:23.504](0) Server started
PSAPPSRV.32290 (0) [2013-10-23T18:56:23.507](3) Detected time zone is EDT
PSAPPSRV.32338 (0) [2013-10-23T18:56:25.793](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/2
PSAPPSRV.32338 (0) [2013-10-23T18:56:26.003](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_2/
PSAPPSRV.32338 (0) [2013-10-23T18:57:08.871](2) App server host time skew is DB+00:00:00 (ORACLE PT853)
PSAPPSRV.32338 (0) [2013-10-23T18:57:10.662](0) Server started
PSAPPSRV.32338 (0) [2013-10-23T18:57:10.663](3) Detected time zone is EDT
PSSAMSRV.32388 (0) [2013-10-23T18:57:12.159](2) Min instance is set to 1. To avoid loss of service, configure Min instance to atleast 2.
PSSAMSRV.32388 (0) [2013-10-23T18:57:12.168](0) PeopleTools Release 8.53 (Li nux) starting. Tuxedo server is APPSRV(99)/100
PSSAMSRV.32388 (0) [2013-10-23T18:57:12.265](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSSAMSRV_100/
PSSAMSRV.32388 (0) [2013-10-23T18:57:59.414](0) Server started
PSSAMSRV.32388 (0) [2013-10-23T18:57:59.416](3) Detected time zone is EDT
PSADMIN.32259 (0) [2013-10-23T18:58:48.149](0) End boot attempt on domain PT853
PSAPPSRV.32290 (1) [2013-10-23T18:59:06.144 GetCertificate](3) Returning context. ID=PSADMIN, Lang=ENG, UStreamId=185906140_32290.1, Token=PT_LOCAL/2013-10-23-11.59.26.248432/PSADMIN/ENG/vSz0ix+wq8d+zPRwQ0Wa4hcek0Q=
~
I think the error is indicated in TUXLOG file "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password". The application password "myname" in Browser http://192.168.196.102:8000/ps/signon.html page is not working. I use the same password "myname" to login Data Mover Bootstrap mode, Application Designer, and Application Server psadmin configuration successfully. I have tried a few other passwords in Browser http://192.168.196.102:8000/ps/signon.html page but not working.
My question is:
How to solve Sign In issue on http://192.168.196.102:8000/ps/signon.html that is "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password" ?
Thanks.Dear Nicolas,
Hello. I have used the same password for "DomainConnectPswd" in the file Configuration.properties with that for Application Server setting. Eventually, UserID PSADMIN sign in http://192.168.196.102:8000/ps/signon.html successfully. PeopleTools 8.53 runs correctly in Browser.
It seems that whether upgrade Oracle Linux 5.0 to the latest 5.10 does not have effect !
I am very grateful to your great help for this installation of PT8.53 with Linux and Oracle Database ! -
Job Cancelled with an error "Data does not match the job def: Job terminat"
Dear Friends,
The following job is with respect to an inbound interface that transfers data into SAP.
The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
1.Job Started
2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)
3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.
5.File mist.txt read from /data/sap/ARD/interface/FI/work/.
6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)
7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)
8.Job cancelled after system exception
ERROR_MESSAGE
Could you please analyse and come up about under what circumstance the above error is reported.
As well I heard that because of the customization issues in T.Code BMV0, the above error has raised.
Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
My Trials
1. Tested uplaoding an empty file
2. Tested uploading with wrong data
3. Tested uploading with improper data that has false file structue
But failed to simulate the above scenario.
Clarification Required
Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
Is the above question valid?
Edited by: dharmendra gali on Jan 28, 2008 6:06 AMDear Friends,
_Urgent : Please work on this ASAP _
The following job is with respect to an inbound interface that transfers data into SAP.
The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
1.Job Started
2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)
3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.
5.File mist.txt read from /data/sap/ARD/interface/FI/work/.
6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)
7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)
8.Job cancelled after system exception
ERROR_MESSAGE
Could you please analyse and come up about under what circumstance the above error is reported.
As well I heard that because of the customization issues in T.Code BMV0, the above error has raised.
Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
My Trials
1. Tested uplaoding an empty file
2. Tested uploading with wrong data
3. Tested uploading with improper data that has false file structue
But failed to simulate the above scenario.
Clarification Required
Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
Is the above question valid? -
Background Job cancelling with error Data does not match the job definition
Dear Team,
Background Job is getting cancelled when I run a Job on periodically but the same Job is executing perfectly when I run it manually(repeat scheduling) .
Let me describe the problem clearly.
We have a program which picks up files from an FTP server and posts the documents into SAP. We are scheduling this program as a background Job daily. This Job is running perfectly if the files contain no data. But if the file contains data the JOb is getting cancelled with the following messages.
And also the same Job is getting executed perfectly when repeat scheduling is done ( even for files with data).
Time Message text Message class Message no. Message type
03:46:08 Job PREPAID_OCT_APPS2_11: Data does not match the job definition; job terminated BD 078 E
03:46:08 Job cancelled after system exception ERROR_MESSAGE 00 564 A
Please help me in resolving this issue.
Thanks in advance,
Sai.hi,
If you have any GUI function modules used in the program of job
you cannot run it in background mode. -
Regarding "Data does not match the job definition; job terminated"
Dear Friends,
The following job is with respect to an inbound interface that transfers data into SAP.
The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
1.Job Started
2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)
3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.
5.File mist.txt read from /data/sap/ARD/interface/FI/work/.
6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)
7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)
8.Job cancelled after system exception
ERROR_MESSAGE
Could you please analyse and come up about under what circumstance the above error is reported.
As well I heard that because of the customization issues in T.Code BMV0, the above error has raised.
Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
My Trials
1. Tested uplaoding an empty file
2. Tested uploading with wrong data
3. Tested uploading with improper data that has false file structue
But failed to simulate the above scenario.
Clarification Required
Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
Is the above question valid?Hi dharmendra
Good Day
How are you
I am facing the same problem which you have posted
By any chance have you got the soultion for this
If so please let me know the solution for this.
Thanks in advance.
Cheers
Vallabhaneni -
The item Hierarchical Context Menu does not support pre-calculation
Hello,
Trying to download pre-calculated web templates via RepAgent, using the Hierarchical Context Menu feature within the template (populated via control query with Hierarchy) the system returned the following message upon file download:
"The item Hierarchical Context Menu does not support pre-calculation"
As a result the Hierarchical Context Menu is not displayed on the downloaded html-files. Navigation not possible.
Could not find any constraints documented in the online help, at this point.
Question: is there something missing on our setup or is this really out of scope for precalculation with navigation?
Any other experiences on that or shall we open OSS-message?
Best regards,
Markus
(We are on BW3.1)Hi,
we have the same problem. Does anybody have any hint or workaround? Is there a solution for this in 3.5 or any upcoming version.
Any input is appreciated.
Thanks,
Stefan -
The "FIND" feature in the Edit menu does not work. I can't find anything on a webpage
The "FIND" feature in the Edit menu does not work. I cannot search a page. If I am looking for the word "Doctor" and I know it is on the page. All I get after typing the first letter is that the typing box turns red.
This is not fun.Make sure that <b>[] "Match case"</b> on the Find bar (Ctrl+F) doesn't have a check-mark.
-
Right click context menu does not appear only for Java 1.7, AWT TextField
I have been debugging some issues that an application has been having with Java 1.7 versus older versions. A new problem I have encountered is that the right click context menu does not function in any TextField. It works fine when running/compiling it with any previous version of Java. I have tried coding a simple test with a Frame, Panel and TextField to see if it might be something else in the more complex application that was causing it, but the simple test class has the same problem.
I have searched for other people having the same issue, but I have not found anything comparable. This seems like a huge change from one version to the next and I am surprised that I am not finding this mentioned anywhere else. Can someone point me to anything that discusses this issue that I am having? Does 1.7 require I implement my own context menu? I realize AWT is old technology, but this is an old, fairly complex application that doesn't use swing, and that is not going to change at this point.
My simple test:
import java.awt.*;
import java.awt.event.*;
import java.util.*;
class testF3 extends Panel
public static void main(String args[])
Frame f = new Frame();
Panel p = new Panel();
f.setLayout(new BorderLayout());
f.add("North", p);
TextField tf1 = new TextField("", 20);
p.add(tf1);
Dimension medm = f.getSize();
medm.height = 100;
medm.width = 200;
f.setSize(medm);
f.setVisible(true);
}In the past few days since upgrading to 4.0.4, the entire right-click context menu for links is gone and replaced with one item: "Copy Link" The "Open In New Tab" item, along with some other context items, is no longer there.
That's actually a problem with your particular installation of Safari, b. I've got all the contextual menu entries with my 4.0.4.
I helped fix one of these recently here at the forum. Try the procedure from the following post (it got back Tho's missing contextual menu entries):
http://discussions.apple.com/thread.jspa?messageID=10598385� -
My Bridge Tools menu does not have Photoshop submenu
Hi,
In Bridge CS3, I just noticed that the Tools menu does not have a Photoshop submenu and therefore I cannot apply Batch commands - among other things.
I have the latest version (2.1.1.9) in MAC OS X Leopard. What is going on?
I have a friend that has the same program in Windows Vista and has the Photoshop submenu...
Please help!
Juan DentCheck your preference folder start up scripts. Inhere the startup script should have a checkmark on it. if not put in on and after restart the script should be there.
Otherwise try a refresh preferences holding down the option key when restarting bridge. -
Universal Worklist menu does not appear
Hi All
I still have same problem. We are on SP14, EP6. My id is in admistrave group
It looks strange, There is no Universal Worklist & Workflow menu under detail navigation bar.
I don't see Universal worklist & workflow menu under the the following ..System Administration -> System Configuration
I can see the following in System admin-->System config ..system landscape, System landscape overview, keystore admin, UM config, service config, KNowlegement management(content management, collaboration, index admin)....strange ...Universal worklist & workflow menu missing.
As suggested above, i also refreshed the UWL service via System Administration -> Support -> Portal Runtime.
Click on Application Console under "Portal Anywhere" Admin Tools. Select com.sap.netweaver.bc.uwl and click on show. Refresh and restart the services.
It looks like Knolwdge management component is installed as i see the the memnu for knowlege management. Under
System Administration -> System Configuration ...There is Knowledge Management side menu where i can see Universal worklist ( THere are CM, Collaboration,Index admin, Portal app, WF also listed)
But still Universal Worklist & Workflow menu does not appear.
Any suggestions. Thanks again.HI,
Add eu_role to the user. The home workset will be added to the user. Under home->work you will find the UWL iview.
or
You can find the UWL iview in Portal content -> content provided by SAP-> End user content -> Standard portal users -> iviews -> com.sap.coll.iviews -
The navigation menu does not appear when published to a file. My 12 photos are also absent as well, just as if they wernt added.
I have tried rebuilding the site but the same problem appears. Everything else seems perfect up to tha publidhed file.
Has anyone had the same problem,
John
Message was edited by: BOURBAHHave you tried: Trouble installing iTunes or QuickTime for Windows or iTunes for Windows Vista or Windows 7: Troubleshooting ...
-
The navigation menu does not appear when published to a file. My 12 photos are also absent as well, just as if they wernt added.
I have tried rebuilding the site but the same problem appears. Everything else seems perfect up to tha publidhed file.
Has anyone had the same problem,
JohnHave you tried: Trouble installing iTunes or QuickTime for Windows or iTunes for Windows Vista or Windows 7: Troubleshooting ...
-
Acrobat Pro "save as" function in the file menu does not show the current directory of the file
I have installed CC but Acrobat Pro gives me headaches.
The "save as" function in the file menu does not show the current directory of the file but something I have worked on in the past.
It forces me to navigates through my hard disk for this very straightforward thing in normal conditions. I precise: Acrobat is the only software reacting like that.
I use Windows7 professional 64bits.I use what seems to be the latest version available on the Cloud:
To illustrate my point, I open a directory with explorer and double-click on the only PDF in there:
So here it is, open:
When I do a "Save as", it takes me to a totally different place on the disk!
Very annoying...
Thanks for your time!
JJ
Maybe you are looking for
-
How to share folder with only one person one same Mac
Could someone please remind me how I share a folder with one person I share my Mac with but not the others (we all have different profiles on the same machine...) Thanks, Michael
-
Recently I had to reinstall everything into my computer. Meaning I lost my entire iTunes playlist (including many purchased direct from iTunes). So now i have an empty iTunes and a full iPod, and because of this my only options are to either delete m
-
I can't pair my Nike+ hyper dunks with my iPad?
I have no issue pairing with iPhone.
-
Find Equiment Number Using Material Number and Serial Number
Hi , I have a problem to find the EQUNR value for a particular Material and Serial Number. Can you please suggest me the master Table to find these information. Actually I used EQUI Table. Gave Material Numer and Serial Number to find EQUNR value.
-
Exsessive buffering when watching internet video?
I am a pc user switching to mac... I want to watch videos over the web, but have found that difficult. The main problem is constant buffering. It will play 2 seconds of video and then buffer, making it unwatchable. This is both connect via Ethernet o