Account assignment not possible - item not yet calculated

Dear SAP Gurus,
While creating the Shipment Cost Document I am receiving following error.
Account assignment not possible - item not yet calculated
Message no. VY081
When I double click on the Item to enter the conditions the screen goes blank at the item level. Kindly let me know if there is anything missing.
Thanks and Rgards,
Shehryar

Hi,
Please check below config.
LETransportationShipment CostsShipment Cost DocumentShipment Cost Types and Item Categories.
Hope it helps you
Rgds,
Kris.

Similar Messages

Account assignment for service item not copied from PR in PO

Hi,
We have a PR created for a service item from SRM. When we run ME59 it automatically creates the PO without issues by copying the account assignment details from the PR. The problem is as follows:
1. If we try to manually create a PO using ME21N from this PR, the account assignment is not getting copied from the PR but it throws the account assignment pop up screen where we manually have to enter the account assignment.
2. The client is using a Z transaction of ME59 which is copy of Me59 but with a few validations (nothing to do with Account assignment). This Z Tcode also fails to create the PO with the error 'no account assignment'. Indicating that the PR account assignment details are not getting copied.
Note: This is happening for all PR's irrespective of whether its created in SRM or created using ME51N.
Please let me know if someone has faced a similar issue
Thanks,
Lakshmi

Hi,
Please check first if notes 1085214 and 1102653
could solve the issue.
Regards,
Edit

Account assignment not possible (Asset not assigned to a business area)

HI
While posting an asset acquisition through F-90 by entering Business area, doc.type AA,TT-100,PK-70, i am getting the error messege AA483 - "Account assignment not possible (Asset not assigned to a business area)".
I have correctly created asset master and assigned Business area and Cost centre.
And i am not getting any problem in another company code for same asset class.
Please suggest
Bhanu Prakash

Hello
Assets are assigned to a single business area in their master record. Every posting to an asset balance sheet account is automatically posted to that business area. The business area for an asset is passed on to all line items connected with the asset. Therefore you do not need to make a manual account assignment for a business area at any point.
http://help.sap.com/erp2005_ehp_02/helpdata/en/5f/1fac7c4aee11d189740000e8322d00/frameset.htm
Check the info on the link please
Reg
assign points if useful

Account assignment to Profit. segment not supported with this G/L account

Hello Guru,
we have activated the COPA- Costing based. after activation while doing the Shipping Cost calculation thr T.C VI01
system is throughing error message
Account assignment to Profit. segment not supported with this G/L account
Message no. ME032
Thanks And Advance
Laxmi narayan

Hi
Probably the GL Account is not created as Cost element with CE category 1 (costs)
Jayaram

PO Account Assignment Fund Change is not transferred to backend

We are on SRM 550 SP10 ECS.
When a PO is being changed, if the fund is changed, that change does not get transferred to R/3. The old Fund when the PO was created is retained on the R/3 side. On the SRM side the new fund is retained.
Note:
The fund that I am talking about is under the Account Assignment link of Item data. If the Cost center is changed the new cost center is reflected to the backend.

Hi KA!
Have you found a solution to your problem? We have the same problem and is looking for the FM to get the fund center and commitment item from back end.
Sincerely
Anders

Error-Grant Evalution posting-"Account assignment to grant is not supported

In t-code PQ_GRANT_CALC Grant evaluation, i can see the line for the Grant Info. But the same is not getting posted.
while posting it is showing the error "Account assignment to grant is not supported".
I can see the fee calculation for the student and posted the same to the student account.the fee is not getting posted aganist the grant.
(even we have tried grant evalaution posting before posting to the stuent account)
Pls hlep me, i have assigned the grant in the FMDERIVE and also in GMDERIVE.
In the Student master file, in the GRANT Assignment tab, i have mentioned the required data,i,e
assigned Grant and internally managed also.
I can able to post the Budget DOC in Grant.
Hope ,if i post the Student Doc in SLCM(t-code PIQST00 ), for the Grant amount entered in Student, it will reduce the amount of Grant created in the Budget?

not done

No account assignment to customer order (not active in COArea 3361, yr 2010

Hi everybody,
When I am doing Individual PO with below settings
1. create an material NO with type FERT and item category BANC ;
2. create a sales order via VA01;
3. create an PO via ME21N with ref to PR;
4. but system return an error
message like this :
No account assignment to customer order (not active in COArea 3361,
year 2010).
Messageno. KI 162
Diagnosis
You posted a customer order even though sales orders is not active in
controlling area 3361, fiscal year 2010.
System Response
The posting is invalid.
Procedure
Activate sales orders in CO configuration for fiscal year 2010.
To use production to order without updating to CO, you can deactivate
this error message. The work area is KI,message number 162.
How can I do with it ?
Thanks,
Nagesh

Hi Karthik,
                 Thanks a lot for ur inputs , I checked whatever ur mentioned but till now it has not salvoed. what i absorbed is controlling area is not copying into PO when i am doing with ref to PR.in PO item level account assignment tab G/L a/c is 892000 and Controlling area is Blank and it is in Gray mode.
                                         when i was doing the 3rd party sales order, same with ref to PR ,in PO controlling area is coming automatically.
Pls let me know if u have any idea about this.
    Thanks in advance.
Regards,
Nagesh N
9030299571

Acct assignment cat. of item not in user data; Inform system admin

Hi all,
We are on a SRM EBP 5.0 project and we are getting the following error when we try to create a purchase order from the purchasers login.
"Acct assignment cat. of item not in user data; Inform system admin"
The complete details of the screen shot are as follows:
The following error text was processed in the system DS1 : Acct assignment cat. of item not in user data; Inform system admin.
The error occurred on the application server lndnysap1_DS1_01 and in the work process 0 .
The termination type was: TH_RES_FREE
The ABAP call stack was:
Form: ABORT_PO of program SAPLBBP_PO_UI_ITS
Form: ADD_TO_MSG_LOG of program SAPLBBP_PO_UI_ITS
Form: ADD_TO_MSG_LOG_MULTI of program SAPLBBP_PO_UI_ITS
Form: SET_PRICING of program SAPLBBP_PO_UI_ITS
Form: DETERMINE_EXTERNAL_SCREEN of program SAPLBBP_PO_UI_ITS
Module: DETERMINE_EXTERNAL_SCREEN of program SAPLBBP_PO_UI_ITS
We did the following steps :
Created shopping cart- employer and WF triggered apprd. by manager.
Purchaser did "Carry Out Sourcing ", and if we say "Create Purchase Order", the PO gets created with a information message that "Incomplete purchase order 11/1 is created "
When we go to "Process Purchase Order" for the completion of the same. If we see Follow-on documents "Purchase Order Held" occurs.
In the tab Item Data details Pricing tab we get this error.
Do any of the SRM gurus can suggest us what to do?
In our admin logon it shows
"Server for pricing is not running. Start Server" occurs after every run of this process purchase order from the purchasers login, though our IPC is working fine.
Will be of great help if somebody replies soon.
Sincerely,
Sridhar.

Hi,
IPC has to be configured.
Please check the following threads :
https://forums.sdn.sap.com/click.jspa?searchID=211089&messageID=2714527
https://forums.sdn.sap.com/click.jspa?searchID=211089&messageID=2715019
Kind regards,
Yann

Admission Audit Run (Action is not possible; function not released yet)

Hi All,
I have created a Requirement Profile Template for admission audit and attached it with a program of study.
But when I am trying to run the admission audit using Transaction PIQAUD_MP_CS, its giving a message that...
Action is not possible; function not released yet....
Please tell me what does this message indicate, please let me know if u need more information regarding it.
Thanks in Advance
Sudhir Gupta

Dear Michael,
Thanks for such a beautiful and elaborative answer. Please read my comments on the points you discussed :
Create an admissions record: at this time a requirement profile is automatically generated for the program of study, as long as your program has been defined as 'Use Assessments'.
Yes its generating a requirement profile automatically as soon as admission record is created.
In the student file, go to the admissions tab and look for the icon that represents 'Audit Details'. (It looks like the icon for 'syntax check' in ABAP). Click on that.
On Clicking 'Audit Details' icon it leads to another screen which contains all information like Admission application data but requirements section is blank.
Now you are taken to a screen where you can see the admissions audit profile for the student. Execute the audit there, and you will see the list of checkboxes and results.
The requirement screen is blank. No error message.
Though i maintained the Requirement Profiles and RPT as per Cookbooks.
I want to download the screen shots of Requirement Profiles and RPT. Please let me know how to upload screen shots in SDN.
Warm Regards
Vinod Kumar

MD04 for account assignment E and item cat L

Hi
I have created PR for perticular material X by running MRP. PR is created with account assignment catagory E and item catagory L. now i converted this PR into PO. my problem is PO is not visible in MD04 for x material. only PR is visible.
what is the problem

Hi,
Please can you explaing the scenarion you arew orking on? I didn't observe the combination of Sales oder with Subcontracting??.
For creating PO,it is not supporting PR document with account assignment E and Item categorty L.For this you may need to change config settings.(If try to change config settings...first you have think are changes really align with the business)
Thanks,
Sateesh.

Release orders against contract 4600000069 not possible (contract not relea

Hai,
I had created a contract and had a release procedure for it.
I had released the contract using ME35k.
When i try to raise a p.o agaist the contract i am getting the error as "Release orders against contract 4600000069 not possible (contract not released)"
What could be the problem and solution for the above error message.
Thanks
Hari.

Bijay Kumar Barik wrote:
Hi,
>
> Error clearly says, contract not released. Release order can be created against contract ,if contract is released.Check=> you may used ME35K to release the contract , but after releasing with releases code, you have not saved the release .Just do use again ME35K to release the contract with release code & save.
>
> NOTE:
> Also check how many levels of release is there for contract and check all levels of release with respective release codes is done or not before creating release order WRT contract.
>
> Regards,
> Biju K
I had released and saved for all the levels i.e for all the release codes.
Still it is behaving the same.
I have not used any ref purchase org as mentioned above in one of replies.

Regarding Template updates, what does this error " not updated, item not found" mean?

This is the second time I've posted this question so hopefully somebody will respond. At some point in the last few weeks I found that I could no longer apply a template in a group operation (returns the error shown above). If I modify the template and save it it shows all the related files to be updated but does not actually update them and again returns the error "not updated, item not found". As a test I created a duplicate of a particular .html file and applied the associated template successfully. When I apply a template change it does properly update the newly created file but not the others. I also did a mechanical file compare (using windiff.exe) between the original and duplicate file and there are NO differences in the two .html files. I have also deleted and recreated my site maps several times.
As an aside, Library items do update successfully.
I am running Dreamweaver CS6 on Windows 7.

I have an extensive home network and I consider myself to be very proficient with personal computers (had one since 1981) so let's start at that level.
I have you beat by 2 years. Bought an Apple II+ in 1979!
When this problem first started, I went to another PC (home built desktop Win 7 64 bit) I have and created a new Dreamweaver site copy using an instance of the site that was on a network share running on a NAS box (Netgear RAID5) that I use for central file storage. Just for a test I did the same thing on my main working PC (see below) and created a new site with the data that was on the network share. Well, lo and behold the template problem went away with both of the two sites I am having trouble with. Now I have no idea why sites housed on my PC are having a problem but that seems to be the issue.
Your setup is very similar to mine - NAS (I'm using an Intel NAS) housing all my working files.
Just for a test I did the same thing on my main working PC (see below) and created a new site with the data that was on the network share. Well, lo and behold the template problem went away with both of the two sites I am having trouble with.
So it's working in the duplicate site, but not the current site. And in the current site, you have some files that update as desired and some that do not? Why not just make the duplicate site be the main working site?
Anyhow, I cannot think of any wrinkle that would cause DW to update some legitimate child files in a site but not others, except for a corrupted file cache.

User Exit to Copy Account Assignment of PR items

Hi All,
Currently i have a requirement to copy the G/L account and Cost centers entered in the 1st line item of PR to other items automatically.Kindly suggets me a User exit or Badi where i can get get all the account assignment details for each item of the PR.
Thanks in Advance.
Regards,
KB

Dear All,
My requirement is to Copy the G/L account and Costcenters from the 1st line item of the PR to all other line items of PR.
We can do it manually by clicking on the Repeat on button available on the Account assignment screen.But i'm not sure how can we tick that button automatically.
Or is there any other way to do it?Kindly guide.
Thanks in advance.
Regards,
KB

'account assignment' tab in item details in a PO..question.

Hi all,
From a business and also from SAP perspective what is the meaning of account assignment details of a line item in a PO? Please refer to documents/files or threads if needed...
Thanks,
Charles.

Refer this link:
http://help.sap.com/saphelp_srm30/helpdata/en/30/2f20380217de3fe10000009b38f889/frameset.htm

Release orders against contract 4600000002 not possible (contract not relea

hi all,
Am trying to create a blanket po from a contract. but obviously, the release strategy i set up for po release has affected the contract created and hence gives the error above.
how can i over come this challenge please?

Dear,
Please check contract release status in ME33K, header - Release strategy. Check all released contract or not. If not do relase with ME35K.
Regards,
Syed Hussain.

Account assignment not possible - item not yet calculated

Similar Messages

Maybe you are looking for