Account Clearing fails with update terminated

we are trying to clear our accounts General Ledger, Vendors and Customers (FB1D, FB1K, FB1S) and it fails it gives an express document and it says update was terminated and it gives error info : F1 801: Clearing line item 002.
what could be the cause of this error and how can i resolve this error?

Hello
Clearing is a standard process and termination is an unusual happenning.
I presume by termination you meant the execution resulted in a dump.
Take the screen shot from SU54 ( I am not sure ) and send it across to the BAISIS team.
They would analyse and resolve this termination to reoccur.
Reg
assign points if useful

Similar Messages

Apple mail problem message reads - Account removal failed with error: "The operation couldn't be completed. Unable to find an account for the UID given.".

Account removal failed with error: “The operation couldn’t be completed. Unable to find an account for the UID given.”. - trying to remove account but get this message please help

Try to remove the account in the Internet Accounts preference pane.

Lucreate fails with update 8 packages on system with zone

I have a Solaris 10 update 7 system with a single zone. Before installing the update 8 LU packages I was able to create a new BE without error. After adding the packages, lucreate gives the following error:
Creating clone for <rpool/ROOT/10u7ZFSa/zoneRoot/common@10u8> on <rpool/ROOT/10u8/zoneRoot/common-10u8>.
cannot mount 'rpool/ROOT/10u8/zoneRoot/common-10u8': legacy mountpoint
use mount(1M) to mount this filesystem
ERROR: Failed to mount dataset <rpool/ROOT/10u8/zoneRoot/common-10u8>
legacy is not an absolute path.
WARNING: split filesystem </> file system type <zfs> cannot inherit
mount point options <-> from parent filesystem </> file
type <-> because the two file systems have different types.
Any clues?

Hi Ish68,
It looks like the previous uninstallation didn't go through completely and that might cause conflict during the new installation. It is recommended to remove the program manually from Control Panel and if it still fails you can try to run the standalone uninstaller from F-secure. You can refer below link for the steps:
Uninstallation steps :
https://community.f-secure.com/t5/Security-for-PC/How-do-I-uninstall-the-product/ta-p/15384
Installation steps for F-Secure SAFE :
https://community.f-secure.com/t5/Security-for-PC/How-do-I-install-Internet/ta-p/43585
Thank you.

Applet load failing with update 20

Hello,
I have an applet that was working up to update 18. The applet has a web services client that now fails when being instantiated with 1.6 u20
The stack track indicates it is related to security. If anyone has any clues on what the cause is or how to troubleshoot, that would be great.
Thanks
Exception in thread "thread applet-1" java.lang.ExceptionInInitializerError
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
     at java.lang.reflect.Constructor.newInstance(Unknown Source)
     at java.lang.Class.newInstance0(Unknown Source)
     at java.lang.Class.newInstance(Unknown Source)
     at javax.xml.ws.spi.FactoryFinder.newInstance(Unknown Source)
     at javax.xml.ws.spi.FactoryFinder.find(Unknown Source)
     at javax.xml.ws.spi.Provider.provider(Unknown Source)
     at javax.xml.ws.Service.<init>(Unknown Source)
<snip>
Caused by: java.lang.NullPointerException
     at sun.plugin2.applet.Plugin2ClassLoader.getTrustedCodeSources(Unknown Source)
     at com.sun.deploy.security.CPCallbackHandler$ParentCallback.strategy(Unknown Source)
     at com.sun.deploy.security.CPCallbackHandler$ParentCallback.openClassPathElement(Unknown Source)
     at com.sun.deploy.security.DeployURLClassPath$JarLoader.getJarFile(Unknown Source)
     at com.sun.deploy.security.DeployURLClassPath$JarLoader.access$700(Unknown Source)
     at com.sun.deploy.security.DeployURLClassPath$JarLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sun.deploy.security.DeployURLClassPath$JarLoader.ensureOpen(Unknown Source)
     at com.sun.deploy.security.DeployURLClassPath$JarLoader.<init>(Unknown Source)
     at com.sun.deploy.security.DeployURLClassPath$3.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sun.deploy.security.DeployURLClassPath.getLoader(Unknown Source)
     at com.sun.deploy.security.DeployURLClassPath.getLoader(Unknown Source)
     at com.sun.deploy.security.DeployURLClassPath.findResource(Unknown Source)
     at java.net.URLClassLoader$2.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findResource(Unknown Source)
     at sun.plugin2.applet.JNLP2ClassLoader.findResource(Unknown Source)
     at java.lang.ClassLoader.getResource(Unknown Source)
     at sun.plugin2.applet.JNLP2ClassLoader.access$001(Unknown Source)
     at sun.plugin2.applet.JNLP2ClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.plugin2.applet.JNLP2ClassLoader.getResource(Unknown Source)
     at java.lang.ClassLoader.getResource(Unknown Source)
     at sun.plugin2.applet.JNLP2ClassLoader.access$001(Unknown Source)
     at sun.plugin2.applet.JNLP2ClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.plugin2.applet.JNLP2ClassLoader.getResource(Unknown Source)
     at javax.xml.bind.ContextFinder.find(Unknown Source)
     at javax.xml.bind.JAXBContext.newInstance(Unknown Source)
     at javax.xml.bind.JAXBContext.newInstance(Unknown Source)
     at com.sun.xml.internal.ws.spi.ProviderImpl$2.run(Unknown Source)
     at com.sun.xml.internal.ws.spi.ProviderImpl$2.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sun.xml.internal.ws.spi.ProviderImpl.getEPRJaxbContext(Unknown Source)
     at com.sun.xml.internal.ws.spi.ProviderImpl.<clinit>(Unknown Source)
     ... 19 more

In case this helps, just before the exception is thrown the java console shows:
basic: JNLP2ClassLoader.findClass: xxx: try again ..
security: Loading certificates from Deployment session certificate store
security: Loaded certificates from Deployment session certificate store
security: Loading certificates from Internet Explorer TrustedPublisher certificate store
security: Loaded certificates from Internet Explorer TrustedPublisher certificate store
security: Validate the certificate chain using CertPath API
security: Obtain certificate collection in Root CA certificate store
security: Obtain certificate collection in Root CA certificate store
security: Start to check whether root CA is replaced
security: The root CA hasnt been replaced
security: No timestamping info available
security: Found jurisdiction list file
security: No need to checking trusted extension for this certificate
security: The CRL support is disabled
security: The OCSP support is disabled
security: This OCSP End Entity validation is disabled
security: Checking if certificate is in Deployment denied certificate store
security: Checking if certificate is in Deployment permanent certificate store
<above repeats many times>
ecurity: This OCSP End Entity validation is disabled
security: Checking if certificate is in Deployment denied certificate store
security: Checking if certificate is in Deployment permanent certificate store
basic: Removed progress listener: null
Exception in thread "thread...

F-44 Vendor Clearing Update Terminated

Dear All,
              When we try clearing Open Line Items of a particular Vendor, system posts the document but eventually produces an ABAP RunTIme Error with Update Terminated Error. The line items remain as open items instead of getting cleared.The Dump Details are:
The ABAP/4 Open SQL array insert results in duplicate database records.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLJ1IDEFTAX" had to be terminated because one of
the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
The termination occurred in the ABAP program "SAPLJ1IDEFTAX" in
"J_1I_POST_DEFTAX_ITEM".
The main program was "RSM13000 ".
The termination occurred in line 44 of the source code of the (Include)
program "LJ1IDEFTAXU04"
of the source code of program "LJ1IDEFTAXU04" (when calling the editor 440).
The program "SAPLJ1IDEFTAX" was started in the update system.
Processing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in
the
procedure "J_1I_POST_DEFTAX_ITEM" "(FUNCTION)" but was not handled locally, not
declared in the
RAISING clause of the procedure.
The procedure is in the program "SAPLJ1IDEFTAX ". Its source code starts in
line 7
of the (Include) program "LJ1IDEFTAX$04 ".
DATA ls_deftax_item_insert TYPE J_1IDEFTAX_IT.
LOOP AT it_deftax_item_insert INTO ls_deftax_item_insert.
    IF ls_deftax_item_insert-line_type IS INITIAL.
      message x025(DEFTAX) with sy-tcode
                                       'NO_LINE_TYPE'
                                       'DEFTAX_ITEM'
                                       'FI_POST_DEFTAX_ITEM'.
    ENDIF.
ENDLOOP.
IF NOT it_deftax_item_insert[] IS INITIAL.
    INSERT J_1IDEFTAX_IT FROM TABLE it_deftax_item_insert.
ENDIF.
IF NOT it_deftax_item_update[] IS INITIAL.
    UPDATE J_1IDEFTAX_IT FROM TABLE it_deftax_item_update.
ENDIF.
ENDFUNCTION.
Is anybody aware of any solution or note related to this.
Regards,
Sonali.

Hi Sonali,
       This error due to Some text objects and messages are missed in consolidation system. Please take help of the basis consultant and implement the support packages 932658 & 932659
Regards,
Srinivas Muthyala

Update Termination from Author @ time Executing T code FINT (int calculation

Hi Guru,
currently i am facing issue related with Update Termination @ time of running "FINT" T code but Interest document get posted successfully.
need expert advice to resolve this issue.
SM13 screenshort attached.
Thanks
Pankaj

Hi Pankaj,
I was having the same issue pending for some time and I just solved it:
Basically you are getting this issue because your are executing the same
Interest Calculation run multiple times (message CD 327).
Why:
For each Interest Calculation run, SAP creates a change document in tables
CDHDR/CDPOS (1 document per calculation run).
When re-executing that same run, the system tries to insert the same record
in the tables and of course that generates a short dump.
SAP is actually clear about re-execution of Interest Calculation run:
SAP Note 1499117 “We do not support the duplicate interest calculation of a period.”
Resolution:
If you need to re-execute the Interest Calculation run, then reverse the
initial execution (FINTSHOW) and execute again (FINT).
I just tested this and it is working fine.
If this has helped solve your issue, please mark as correct answer so that
other people can refer to it.
Regards,
Olfa

Master Data loading got failed: error "Update mode R is not supported by th

Hello Experts,
I use to load master data for 0Customer_Attr though daily process chain, it was running successfully.
For last 2 days master data loading for 0Customer_Attr got failed and it gives following error message:
"Update mode R is not supported by the extraction API"
Can anyone tell me what is that error for? how to resolve this issue?
Regards,
Nirav

Hi
Update mode R error will come in the below case
You are running a delta (for master data) which afils due to some error. to resolve that error, you make the load red and try to repeat the load.
This time the load will fail with update mode R.
As repeat delta is not supported.
So, now, the only thing you can do is to reinit the delta(as told in above posts) and then you can proceed. The earlier problem has nothing to do with update mode R.
example your fiorst delta failed with replication issue.
only replicating and repeaing will not solve the update mode R.
you will have to do both replication of the data source and re-int for the update mode R.
One more thing I would like to add is.
If the the delat which failed with error the first time(not update mode R), then
you have to do init with data transfer
if it failed without picking any records,
then do init without data transfer.
Hope this helps
Regards
Shilpa
Edited by: Shilpa Vinayak on Oct 14, 2008 12:48 PM

Receiving Error Message : Cost Of Goods Sold Account Generation Failed

Hi All,
We need some assistance with this issue...for a given item when the Customer RMA order Line is being received into a given organization/sub inventory/locator we are getting this error message in the Receiving Transactions Interface ( RTI ) as mentioned below.
Cost Of Goods Sold Account Generation Failed with error :RVTII-030: Subroutine rvtiicreate() returned error
Cause: Subroutine rvtiicreate() returned an internal error.
We checked for this item in the organization the Cost of Goods Sold Account has been defined in the Costing Tab in the Item-Org Assignment and this GL account is also enabled on the GL side and is Active.
The scenario is like this :
1. Firstly this item is shipped out on an Outbound order line to the customer location and we checked for the valid Sales Order Issue transaction against this item for this order. We checked for its Inventory Distributions as well.. these look to be valid.
It shows : Inventory valuation account is decremented while the Deferred Cogs of Goods Sold account is incremented.
2. Then this item is being entered on Return order line and after booking the order line . It goes to Awaiting Return status. Next the user tries to attempt the Receipt for the Customer RMA order line for this item we are getting the error mentioned below in the RTI tables :
Cost Of Goods Sold Account Generation Failed with error :RVTII-030: Subroutine rvtiicreate() returned error
Cause: Subroutine rvtiicreate() returned an internal error.
Coudl someone please assist us with this issue as this is happening in Production instance ..that would be very helpfull of you..
This is an urgent issue
thanks

Hi,
Standard workflow "OM : Generate Cost of Goods Sold Account" has following steps:
1/ Start generating Code Combination
2/ Get CCID for a line
3/ Copy Values from Code Combination
4/ Validate Code Combination
5/ End generating Code Combination
If I want to modify the segment4, the custom function to set the attribute FND_FLEX_SEGMENT4 need to be inserted just after the step "Copy Values from Code Combination" (NOT just after "Get CCID for a line").
Is it what you have done?
J.

When I try entering a new event in iCal on my MacBook Air, I get an error message popping up on my screen that says: The request for account "iCloud" failed. The server responded with "502" to operation CalDAVSetPropertyQueueableOperation. Help!!??

When I try entering a new event in iCal on my MacBook Air, I get an error message popping up on my screen that says:
The server responded with “502”
The request for account “iCloud” failed.
The server responded with “502” to operation CalDAVSetPropertyQueueableOperation.
The request for account “iCloud” failed.
I am then given the option of staying Online or going Offline.
Can anyone help me?
thanks

Hello b.krushel,
Thank you for using Apple Support Communities
Any number of things could cause this issue, so I would recommend this article named iCloud: Troubleshooting iCloud Calendar found here http://support.apple.com/kb/TS3999.
These sections in particular:
General Troubleshooting
Make sure there are no current issues listed on the System Status that affect iCloud Calendar. The System Status is located on the iCloud Support webpage.
Make sure you have fully enabled iCloud Calendar for the client you are using (for more setup and troubleshooting information on iOS, OS X, Windows and iCloud.com, see the additional details below).
Check to see if the issue you are seeing is covered in iCloud Help. To search iCloud Help, visit help.apple.com/icloud.
Check your settings and preferences as something may not be set up correctly. For example, having incorrect date and time settings can cause issues which are easily resolved by entering the appropriate settings.
Troubleshooting Calendar on OS X Mountain Lion (iCal on OS X Lion)Note: For instructions on setting up iCloud Calendar with Calendar or iCal on your Mac, see iCloud Setup.If you are having trouble with Calendar or iCal on a Mac and you are using iCloud Calendar, try each of these steps, testing after each to see if the issue is resolved:
Make sure you are using OS X Lion v10.7.2 or later. Click here for help verifying the version of OS X you are using.
Make sure your computer is online. Attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud calendars and events will not update in iCal. Click here for more information about troubleshooting your Internet connection.
Verify that your iCloud member name is entered into the iCloud Preference pane in System Preferences. See iCloud Setup for more information about setting up iCloud on a Mac.
Make sure you enter and update calendar information in the iCloud section of Calendar or iCal. Only calendars and events in the iCloud section of the Calendar or iCal Calendar list will be pushed to iCloud. Both Calendar and iCal for the Mac support the display of and interaction with multiple accounts and datastores, for example, iCloud, On My Mac, Exchange, Google, and so on. This makes it easy to create or modify events or calendars in a section of Calendar or iCal that may not be updating iCloud. Learn more about moving local calendars to iCloud.
In some cases, you may find that you have data duplicated in both the local On My Mac and the iCloud sections of Calendar or iCal. Learn more about resolving this issue.
You can make the iCloud calendar your default calendar for all new events. In Calendar on OS X Mountain Lion, choose Calendar > Preferences > General, or in OS X Lion, choose iCal > Preferences > Generaland under the Default Calendar heading, select one of the Calendars under the iCloud heading. Close the Preferences window to save this change.
If recent changes simply don't appear, try forcing Calendar or iCal to refresh by selecting Refresh All from theCalendar menu.
Make sure your account was successfully created in Calendar on your Mac (or iCal). After upgrading to iCloud Calendar, you may need to quit and reopen Calendar (or iCal). To confirm your account is configured correctly in iCal:
Open Calendar (or iCal).
Open Calendar (or iCal) Preferences.
Click Accounts. You should see an account with your iCloud member name entered.
Turn iCloud Calendars off and back on
Quit Calendar (or iCal).
Choose Apple () menu > System Preferences > iCloud.
Remove the checkmark in the checkbox next to Calendars.
Close System Preferences and wait about a minute.
Open System Preferences and choose iCloud.
Replace the checkmark next to Calendars.
Close System Preferences.
Open Calendar (or iCal) and test to see if the issue has been resolved.
Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
Take care,
Sterling

Creative Cloud update fails with "the download appears to be corrupted" when tried through our company's firewall, but succeeds if the computer is taken outside the firewall

Creative Cloud update fails with "the download appears to be corrupted" when tried through our company's firewall, but succeeds if the computer is taken outside the firewall. The IT guys have opened up the ports and URL's specified in the Adobe documentation. I have also captured the network traffic of both the failed and successful downloads for IT to examine (using Little Snitch), however they can find nothing to account for the problem. Adobe just seems to "give up and die" after about 2-3 minutes. Why is this? How can I or IT fix this?
Can I send the above log files to someone familiar with these issues for examination?

Hi Gveo,
Please follow the article: Creative Cloud Help | About Creative Cloud Packager which will help you to get your issue fixed.
Thanks,
Ratandeep Arora

CC app manager update failed with error code 50 after reaching about 35%

Trying to update the CC app manager. The update is always very slow (I have ATT DSL, lowest level) and I usually terminate it after an hour or so. Today I let it run and it failed with error code 50 after reaching about 35%. Any ideas?

Update to my original post. I read through some of the suggestions that I found in other threads for fixing this problem, and it appears that this has been an ongoing issue. Numerous fixes have been suggested, some very convoluted, difficult, and involved, including those that came from the customer support folks. I passed on those as this should be something simple. How Adobe manages to let updating of their own software turn into an ongoing problem is beyond me and sort of defeats the purpose of subscribing. I then noticed that a simple fix had been suggested a few times, so I tried that.
The user suggested fix that worked for me was:
1) Restarted computer (Asus Windows 7 i3 machine for me) in Safe Mode with Networking. Logged into my separate Admin account just in case.
2) Started the creative cloud desktop app.
3) The app said it needed to be updated. I hit the update button.
4) Update started and proceeded slowly as it had in many previous failed attempts (I have ATT DSL at the slowest level, but it is not dial-up). Within about 30 min, the update succeeded.
5) Restarted computer in normal mode.
6) The creative cloud desktop app now did not say it needs to be updated, and I can update my other apps normally. Have not updated LR or PS yet, but plan to try. If that fails, I may try doing it in the Safe Mode with Networking.
So, that was relatively painless and much much simpler than many of the other suggestions I saw. Do not know if it will work for everyone, but I wanted to post the fix that worked for me. Thank you very much to the 2 or 3 users who had suggested this fix earlier (sorry, I did not write down your IDs, but the threads can be found by searching for creative cloud desktop update fail error code 50). Hope this saves some people a lot of time.

TS1424 Tried to use my apple id to update some apps and got"Connection Manager::invoke:: Failed to find service connection url" After this occured a few times I reset the id password, and this was confirmed by email. It still fails with same message. I

Tried to use my apple id to update some apps and got"Connection Manager::invoke:: Failed to find service connection url" After this occured a few times I reset the id password, and this was confirmed by email. It still fails with same message. Ideas?

Hi, you have to logout from your iTunes account and reconnect it:
Settings / iTunes & App Stores / ...
https://mobilfunkexperten.de/news/13450/sporadische-probleme-im-itunes-und-app-s tore
Hope this helps... :-)

PO update terminated with error - migo

Experts,
Entering a goods receipt in R/3 for an SRM replicated P.O. (using trx.
MIGO). Upon backing out of the transaction, an "update terminated"
message is received with a short dump in the system log.
The Material doc. is posted correctly and all accounting documents are
posted correctly.
We looked at SAP note 131178 but this does not seem to be exactly what
we need.
This error does not happen every time. Sometimes the PO can be posted
without any short dump.
We are on using ECC 6.0 that is connected to SRM 5.5
Any help would be greatly appreciated.
Below is the output of the shortdump in ST22:
Runtime Errors         PERFORM_NOT_FOUND
Exception              CX_SY_DYN_CALL_ILLEGAL_FORM
Date and Time          10/10/2007 13:24:45
Short text
Call (PERFORM) to a non-existent routine.
What happened?
There exist various options:
Error in the ABAP Application Program
The current ABAP program "RMCSS012" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
or
Error in the SAP kernel.
The current ABAP "RMCSS012" program had to be terminated because the
ABAP processor detected an internal system error.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FORM', was
not caught in
procedure "F0020_UPDATE" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The program "RMCSS012" is meant to execute an external PERFORM,
namely the routine "MCE1_100" of the program "SAPFMCEF", but
this routine does not exist.
This may be due to any of the following reasons:
1. One of the programs "RMCSS012" or "SAPFMCEF" is currently being developed.
The name "MCE1_100" of the called routine may be incorrect, or
the routine "MCE1_100" is not yet implemented in the program "SAPFMCEF".
2. If the program SAPMSSY1 is involved in the runtime error, one of
the function modules called via RFC is not flagged as remote-capable.
(see Transaction SE37 Goto -> Administration -> RFC flag)
3. There is an inconsistency in the system. The versions of the
|    programs "RMCSS012" and "SAPFMCEF" do not match.

Hi Pooja,
Check SAP Note 1015948 - AFS:Update terminated after PO Change ME22N. and SAP 485651
Thanks
Sunny

Concurrent requests failing with - emsg:was terminated by signal 11

Hi All,
we have cloned a test instance form production. Most of our concurrent requests are failing with the following error:
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
stat_low = 8B
stat_high = 0
emsg:was terminated by signal 11
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program was terminated by signal 11
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 23532851.
Review your concurrent request log and/or report output file for more detailed information.
Please note that the only requests which are getting successfully completed are the one which produces no output like "gather schema" or "Dashboard".
All the request's output is generated in PDF format on source.
System Information:
OS - Sun Solaris Sparc 64, Solaris 10
Apps - R12.1.1,
DB - 11.1.0.7.
Please help me in getting it resolved.

Hi;
please check below notes:
Arabic Bitmap Reports Complete in Error [ID 798213.1]
R12 XLAABACR Error XLA-95103 When Attempting to Validate Application Accounting Definitions [ID 472564.1]
T4A PDF PROCESS FAILING WITH SIGNAL 11 [ID 1078950.1]
Various Payroll and Legislative Reports Are Erroring With Signal 6 Or Signal 11 [ID 551042.1]
Regard
Helios

Adobe Updates Fail - with FileVault

Hi there,
I have several Adobe products (CS3, Acrobat Professional) that I'm using on my MacBook Pro that all fail to update with the following error:
"The installation process encountered a problem. Please choose from the following options:
Cancel the current update and continue installing the remaining updates.
Stop installing and continue later."
If I continue the installation, each subsequent attempt also fails.
On this particular account, I'm running FileVault. If I sign-in to another non-FileVault account, the installations continue with no problem. However, when I sign back into the FileVault account, it doesn't see the updates! Ugh.
Help!?
I'm using Mac OS 10.5.4 .
Thanks!

>Features of Open Firmware Password Protection
>When turned on using one of the PowerPC-based models listed above, Open Firmware Password Protection:
>Blocks the ability to use the "C" key to start up from an optical disc.
Blocks the ability to use the "N" key to start up from a NetBoot server.
Blocks the ability to use the "T" key to start up in Target Disk Mode (on computers that offer this feature).
Blocks the ability to start up in Verbose mode by pressing the Command-V key combination during startup.
Block the ability to start up a system in Single-user mode by pressing the Command-S key combination during startup.
Blocks a reset of Parameter RAM (PRAM) by pressing the Command-Option-P-R key combination during startup.
Requires the password to use the Startup Manager, accessed by pressing the Option key during startup (see below).
Requires the password to enter commands after starting up in Open Firmware, which is done by pressing the Command-Option-O-F key combination during startup.
Blocks the ability to start up in Safe Boot mode by pressing the Shift key during startup.
Do you REALLY want that?

Account Clearing fails with update terminated

Similar Messages

Maybe you are looking for