Account suspended through error- customer service  not accessible !

Verizon just sunk to new lows.
I asked to port a number from my VOIP provider I wanted to part from to my Verizon account and replace my existing number 
with this new number.
After VW customer "service" took the order, my account was suspended, I cannot log onto the web site, I cannot contact the customer " service" and my balance of $345.- ( it ids a prepaid account ex Alltel ) disappeared !!!.
Whenever I try to reach the customer " service" whenever I put my phone number it disconnects me. I tried for 2 hours( !!!)  via New Sales to get hold of somebody but they just transfer you back to the menu or to some not working extension and that's it.
No phone, no voicemail, no account and 345.- $ gone.  Is this the wireless flagship of the USA ???
Yes, I can waste my time and talk to those apes in the store but that will be even worse.
Does anyone know what to do here ?
BTW this is the message I got from Verizon. Directly after that everything was dead.
Your Verizon Wireless online account - Account Number ending with ........................
This email is to confirm that you have been de-enrolled from My Account. If you would like online access to your Verizon Wireless account in the future, please visit www.verizonwireless.com and re-register at My Account.
Verizon Wireless

Final update :  Yesterday night I was contacted by CS by e-mail ( so they do use e-mail-sometimes) and told that my Alltel account would be reinstated I only needed to send a consent to service interruption which  did.  
Nothing happened, so I expected the same old, but today, a couple of hours ago, I received an e-mail confirmation with request to activate through certain steps. Something went wrong, so I had to call in again, but during the call things cleared up .
Now my account is restored, balance is back phone is working, for the 3rd time suspended web access reinstated and the only thing left is to set up my voice mail box again.
So, 8 calendar  days, 16 net working hours on my side  later, this issue has finally been SOLVED

Similar Messages

  • Production Issue heap space error. Getting ERROR 503 Service not deployed

    Hi,
    I have deployed my web services (VAS services) in tomcat 6.0 in production .I am using axis2 1.4.1 as web service engine and apache 2.2 for httpd service. My problem is that in every 8-10 hrs when no of transactions increase, a problem occurs in my server and I get an “ERROR 503 service not deployed”. I don’t know the exact cause and solution to this problem. Presently every time I face this problem, I restart my httpd services and tomcat. Please help me to rectify this problem as this is hampering our business in a big way. I am sending the log details of catalina.log in tomcat’s log folder
    17-Nov-2008 17:20:56 org.apache.catalina.core.StandardWrapperValve invoke
    SEVERE: Servlet.service() for servlet AxisServlet threw exception
    java.lang.OutOfMemoryError: Java heap space
    17-Nov-2008 17:21:33 org.apache.catalina.core.StandardWrapperValve invoke
    SEVERE: Servlet.service() for servlet AxisServlet threw exception
    java.lang.OutOfMemoryError: Java heap space
    17-Nov-2008 17:21:33 org.apache.catalina.core.StandardWrapperValve invoke
    SEVERE: Servlet.service() for servlet AxisServlet threw exception
    java.lang.OutOfMemoryError: Java heap space
    17-Nov-2008 17:21:36 org.apache.jk.core.MsgContext action
    WARNING: Error sending end packet
    java.net.SocketException: Software caused connection abort: socket write error
    at java.net.SocketOutputStream.socketWrite0(Native Method)
    at java.net.SocketOutputStream.socketWrite(Unknown Source)
    at java.net.SocketOutputStream.write(Unknown Source)
    at org.apache.jk.common.ChannelSocket.send(ChannelSocket.java:531)
    at org.apache.jk.common.JkInputStream.endMessage(JkInputStream.java:121)
    at org.apache.jk.core.MsgContext.action(MsgContext.java:301)
    at org.apache.coyote.Response.action(Response.java:183)
    at org.apache.coyote.Response.finish(Response.java:305)
    at org.apache.catalina.connector.OutputBuffer.close(OutputBuffer.java:276)
    at org.apache.catalina.connector.Response.finishResponse(Response.java:486)
    at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:285)
    at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:190)
    at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:283)
    at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:767)
    at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:697)
    at org.apache.jk.common.ChannelSocket$SocketConnection.runIt(ChannelSocket.java:889)
    at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:686)
    at java.lang.Thread.run(Unknown Source)
    17-Nov-2008 17:21:36 org.apache.catalina.core.StandardWrapperValve invoke
    SEVERE: Servlet.service() for servlet AxisServlet threw exception
    java.lang.OutOfMemoryError: Java heap space
    17-Nov-2008 17:23:31 org.apache.catalina.core.ApplicationDispatcher invoke
    SEVERE: Servlet.service() for servlet jsp threw exception
    java.lang.OutOfMemoryError: Java heap space
    17-Nov-2008 17:23:31 org.apache.jk.common.ChannelSocket processConnection
    WARNING: processCallbacks status 2
    17-Nov-2008 17:23:31 org.apache.catalina.core.ApplicationDispatcher invoke
    SEVERE: Servlet.service() for servlet jsp threw exception
    java.lang.OutOfMemoryError: Java heap space
    17-Nov-2008 17:23:31 org.apache.catalina.core.ApplicationDispatcher invoke
    SEVERE: Servlet.service() for servlet jsp threw exception
    java.lang.OutOfMemoryError: Java heap space
    17-Nov-2008 17:23:31 org.apache.jk.core.MsgContext action
    WARNING: Error sending end packet
    java.net.SocketException: Software caused connection abort: socket write error
    at java.net.SocketOutputStream.socketWrite0(Native Method)
    at java.net.SocketOutputStream.socketWrite(Unknown Source)
    at java.net.SocketOutputStream.write(Unknown Source)
    at org.apache.jk.common.ChannelSocket.send(ChannelSocket.java:531)
    at org.apache.jk.common.JkInputStream.endMessage(JkInputStream.java:121)
    at org.apache.jk.core.MsgContext.action(MsgContext.java:301)
    at org.apache.coyote.Response.action(Response.java:183)
    at org.apache.coyote.Response.finish(Response.java:305)
    at org.apache.catalina.connector.OutputBuffer.close(OutputBuffer.java:276)
    at org.apache.catalina.connector.Response.finishResponse(Response.java:486)
    at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:285)
    at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:190)
    at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:283)
    at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:767)
    at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:697)
    at org.apache.jk.common.ChannelSocket$SocketConnection.runIt(ChannelSocket.java:889)
    at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:686)
    at java.lang.Thread.run(Unknown Source)
    17-Nov-2008 17:23:31 org.apache.jk.core.MsgContext action
    WARNING: Error sending end packet
    java.net.SocketException: Software caused connection abort: socket write error
    at java.net.SocketOutputStream.socketWrite0(Native Method)
    at java.net.SocketOutputStream.socketWrite(Unknown Source)
    at java.net.SocketOutputStream.write(Unknown Source)
    at org.apache.jk.common.ChannelSocket.send(ChannelSocket.java:531)
    at org.apache.jk.common.JkInputStream.endMessage(JkInputStream.java:121)
    at org.apache.jk.core.MsgContext.action(MsgContext.java:301)
    at org.apache.coyote.Response.action(Response.java:183)
    at org.apache.coyote.Response.finish(Response.java:305)
    at org.apache.catalina.connector.OutputBuffer.close(OutputBuffer.java:276)
    at org.apache.catalina.connector.Response.finishResponse(Response.java:486)
    at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:285)
    at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:190)
    at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:283)
    at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:767)
    at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:697)
    at org.apache.jk.common.ChannelSocket$SocketConnection.runIt(ChannelSocket.java:889)
    at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:686)
    at java.lang.Thread.run(Unknown Source)
    17-Nov-2008 17:23:34 org.apache.jk.common.ChannelSocket processConnection
    WARNING: processCallbacks status 2
    17-Nov-2008 17:23:34 org.apache.catalina.core.ApplicationDispatcher invoke
    SEVERE: Servlet.service() for servlet jsp threw exception
    java.lang.IllegalStateException: getOutputStream() has already been called for this response
    at org.apache.catalina.connector.Response.getWriter(Response.java:604)
    at org.apache.catalina.connector.ResponseFacade.getWriter(ResponseFacade.java:198)
    at org.apache.jasper.runtime.JspWriterImpl.initOut(JspWriterImpl.java:125)
    at org.apache.jasper.runtime.JspWriterImpl.flushBuffer(JspWriterImpl.java:118)
    at org.apache.jasper.runtime.PageContextImpl.release(PageContextImpl.java:186)
    at org.apache.jasper.runtime.JspFactoryImpl.internalReleasePageContext(JspFactoryImpl.java:118)
    at org.apache.jasper.runtime.JspFactoryImpl.releasePageContext(JspFactoryImpl.java:77)
    at org.apache.jsp.axis2_002dweb.Error.error500_jsp._jspService(error500_jsp.java:110)
    at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
    at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
    at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
    at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
    at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:654)
    at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:447)
    at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:379)
    at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:292)
    at org.apache.catalina.core.StandardHostValve.custom(StandardHostValve.java:424)
    at org.apache.catalina.core.StandardHostValve.status(StandardHostValve.java:343)
    at org.apache.catalina.core.StandardHostValve.throwable(StandardHostValve.java:287)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:142)
    at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:104)
    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
    at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:261)
    at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:190)
    at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:283)
    at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:767)
    at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:697)
    at org.apache.jk.common.ChannelSocket$SocketConnection.runIt(ChannelSocket.java:889)
    at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:686)
    at java.lang.Thread.run(Unknown Source)
    17-Nov-2008 17:23:34 org.apache.jk.common.ChannelSocket processConnection
    WARNING: processCallbacks status 2
    17-Nov-2008 17:23:34 org.apache.catalina.core.ApplicationDispatcher invoke
    SEVERE: Servlet.service() for servlet jsp threw exception
    java.lang.OutOfMemoryError: Java heap space
    17-Nov-2008 17:23:34 org.apache.catalina.core.ApplicationDispatcher invoke
    Regards,
    Paritosh
    Edited by: anshu_299 on Nov 18, 2008 9:39 AM

    Hi,
    503 error comes when the client finds that the target server is not running or accessible.
    Is the java system up and running? Check if the server nodes are up ?
    check for the logs in work dir and if only server node is not coming up then check for default traces.
    Amit.

  • Blocked account, no notification and customer service.

    My Skype account suddenly got blocked for no apparent reason, without any notification whatsoever. I have run all the options mentioned here on the community such as checking spam folders, opening ports to allow Skype emails to be received, changing password etc... I have eve made an folllow up with through the customer service system almost two weeks ago and still have not yet received an reply. The Live chat and refund form also does not work for me. I am truely disasppointed as I have been a loyal Skype customer for many years now and this how Skype returns the favor? If anyone of the support team is able to read this, please reach out to me as I have tried everything and this is my last resort.

    By the way. I am posting this from my husband's account, because I CAN'T ACCESS MY OWN!!!!!

  • Send E-mail from Oracle (9.2.0.1) : SMTP transient error: 421 Service not a

    I have used Oracle 9i server (9.2.0.1 version) on Windows XP machine(with SP2).I want to send Email from PL/SQL procedure.
    My Question is what sort of configuration needed to perform this activity?
    I have installed IIS (Internet Information Service)
    in my machine, then configure my SMTP mail server
    with a valid email id and password given TCP port 465.
    Later I came to know that to send Email from PL/SQL I have to install Oracle JServer Code. Follow three steps. the steps are
    1. Execute the script as sys "$ORACLE_HOME\javavm\install\initjvm.sql"
    2. Execute the loadjava classfile as
    $ORACLE_HOME\plsql\jlib>loadjava -f -v -r -u sys/**** plsql.jar
    3. Execute the script as sys "$ORACLE_HOME\rdbms\admin\initplsj.sql"
    I sucessfully executed the first step, but for the second step iam not able to locate the plsql.jar file in the specified path.
    So Please tell me if there is any other method to perform this task
    My code is as follows.
    CREATE OR REPLACE PROCEDURE SEND_MAIL (
                                  msg_to varchar2,
                                  msg_subject varchar2,
                                  msg_text varchar2
                                  IS
                                  c utl_smtp.connection;
                                  rc integer;
                                  msg_from varchar2(50) := '[email protected]';
                                  mailhost VARCHAR2(30) := 'mail.google.com';
                             BEGIN
                                  c := utl_smtp.open_connection(mailhost, 465);
                                  utl_smtp.helo(c, mailhost);
                                  utl_smtp.mail(c, msg_from);
                                  utl_smtp.rcpt(c, msg_to);
                                  dbms_output.put_line(' Start Sending data');
                                  utl_smtp.data(c,'From: Oracle Database' || utl_tcp.crlf ||
                                  'To: ' || msg_to || utl_tcp.crlf ||
                                  'Subject: ' || msg_subject ||
                                  utl_tcp.crlf || msg_text);
                                  dbms_output.put_line(' Finish Sending data');
                                  utl_smtp.quit(c);
              EXCEPTION
                   WHEN UTL_SMTP.INVALID_OPERATION THEN
    dbms_output.put_line(' Invalid Operation in Mail attempt using UTL_SMTP.');
                   WHEN UTL_SMTP.TRANSIENT_ERROR THEN
    dbms_output.put_line(' Temporary e-mail issue - try again');
    WHEN UTL_SMTP.PERMANENT_ERROR THEN
    dbms_output.put_line(' Permanent Error Encountered.');
    END;
    Procedure Created.
    SQL> execute prc_send_mail('[email protected]','[email protected]','Good Morning.');
    BEGIN prc_send_mail('[email protected]','[email protected]','Good Morning.'); END;
    ERROR at line 1:
    ORA-29278: SMTP transient error: 421 Service not available
    ORA-06512: at "SYS.UTL_SMTP", line 17
    ORA-06512: at "SYS.UTL_SMTP", line 96
    ORA-06512: at "SYS.UTL_SMTP", line 374
    ORA-06512: at "SCOTT.PRC_SEND_MAIL", line 19
    ORA-29278: SMTP transient error: 421 Service not available
    ORA-06512: at line 1.
    Please tell me how to solve this problem.
    Thank You.

    1) Why did you install an SMTP server locally and then tell your code to try to use the server mail.google.com?
    2) The error you're getting is from mail.google.com indicating that Google isn't running an open SMTP server there. I would be very surprised if Google were running a publicly available SMTP server anywhere since that would be an invitation for spammers.
    Justin

  • Trying to save files on "PC" side of Mac, using a FreeAgent external harddrive.  I get the error message E:/not accessible or something similar.  Can I not use an external harddrive, if not, what is the best way to back up PC side of a Mac

    Trying to save files on "PC" side of Mac, using a FreeAgent external harddrive.  I get the error message E:/not accessible  access denied.  Can I not use an external harddrive, if not, what is the best way to back up PC side of a Mac

    Apple has really crappy NTFS read-only that does not always work. And it is probably a licensing issue.
    Paragon Software is constantly being updated and supported with their NTFS for Mac OS X - they also have an HFS+ driver for Windows that works - Apple's HFS+ read-only driver for Boot Camp / Windows does not.
    I keep seeing problems and lack of support for MacFUSE, that could change.
    http://www.bing.com/search?q=ntfs+for+mac

  • Mail Error: ORA-29278: SMTP transient error: 421 Service not available

    I write process to send mail, it is running ok, but I have error ORA-29278: SMTP transient error: 421 Service not available.
    SMTP Host Address : localhost
    SMTP Host Port : 25
    When I connect to database as SYS and run : exec apex_mail.push_queue result is :
    Pushing email: 1225814842675154
    Pushed email: 1225814842675154
    PL/SQL procedure successfully completed.
    Please explain me what is happened!

    Hi;
    What is DB version?
    Please see:
    From Master Note For PL/SQL UTL_SMTP and UTL_MAIL Packages [ID 1137673.1] check Note 604763.1 "ORA-29278: SMTP transient error: 421 Service not available" When Using UTL_SMTP to Send Email.
    Regard
    Helios

  • ORA-29278: SMTP transient error: 421 Service not available

    Hi all,
    I'm using Oracle 10g working on Windows XP Home.
    I'm trying to send a basic mail from my stored procedure.
    When I tried to run the code, I get ORA-29278: SMTP transient error: 421 Service not available.
    Below is the code I'm trying.
    CREATE OR REPLACE PROCEDURE SEND_MAIL (
    msg_to varchar2,
    msg_subject varchar2,
    msg_text varchar2 )
    IS
    c utl_smtp.connection;
    rc integer;
    msg_from varchar2(50) := 'Oracle9.2';
    mailhost VARCHAR2(30) := '127.0.0.1'; -- local database host
    BEGIN
    c := utl_smtp.open_connection(mailhost, 25); -- SMTP on port 25
    dbms_output.put_line('ok');
    utl_smtp.helo(c, mailhost);
    utl_smtp.mail(c, msg_from);
    utl_smtp.rcpt(c, msg_to);
    utl_smtp.data(c,'From: Oracle Database' || utl_tcp.crlf ||
    'To: ' || msg_to || utl_tcp.crlf ||
    'Subject: ' || msg_subject ||
    utl_tcp.crlf || msg_text);
    utl_smtp.quit(c);
    EXCEPTION
    WHEN UTL_SMTP.INVALID_OPERATION THEN
    dbms_output.put_line(' Invalid Operation in Mail attempt using UTL_SMTP.');
    WHEN UTL_SMTP.TRANSIENT_ERROR THEN
    dbms_output.put_line(' Temporary e-mail issue - try again');
    dbms_output.put_line (sqlerrm);
    WHEN UTL_SMTP.PERMANENT_ERROR THEN
    dbms_output.put_line(' Permanent Error Encountered.');
    END;
    Below are the possibilites I tried..
    I tried to ping localhost.. This is the output I get
    C:\Documents and Settings\Me>ping localhost
    Pinging polasa [127.0.0.1] with 32 bytes of data:
    Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
    Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
    Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
    Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
    Ping statistics for 127.0.0.1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    In one of the thread, a user suggested to do the following
    Go to Control Panel->Add or Remove Programs->Click on
    Add/Remove Wndows Components
    Check IIS check box.
    Select Internet Information Service (IIS) option and click on Details button
    Check whether SMTP Service is checked or not.
    If not selected then select SMTP check box.
    This process should be done on server.
    It will help out from ORA-29278: SMTP transient error: 421 Service not available
    problem.
    There is no IIS in my Windows Components..
    Any suggestions? Thanks in advance

    It sounds like you don't have an SMTP server running on your local machine.
    Even if you install IIS (or some other SMTP server), that is probably not enough to send email outside of your machine because your machine is unlikely to be trusted by the downstream mail servers. If you are running this in a company, you'll need to talk to your company's mail admin to determine where the corporate SMTP server is running. If you running this at home, you'll need to find out from your ISP what SMTP servers are available to you.
    Justin

  • CIMC on C210 server throws Error 2001: Service not available message

    I am trying to configure vmware on a brand new C210 server for the first time and the directions say to access the CIMC and load the vmware media. Sounds easy enough except every time I go to the CIMC webpage I recieve an " error 2001: Service not available"  message on every page I go to and none of the server info fields are populated. If I try to make any changes and save my settings the same message pops up and no changes are saved. Almost like the CIMC doesn't recognize the server or hardware. I ran the host update utility just now and upgraded the firmware for everything to the latest version but still no progress. Anyone have this happen or know how I can fix this?
    Thanks in advance!
    Jess

    I got it working on one of the servers, and havent tried the same solutions on any other server.
    What i did was manually adding an IP adress to the management IP, then save the config before rebooting. After rebooting i put it back to get IP from DHCP, and saved the config. After a secound reboot i was able to use the mangement interface without the 2001 error.
    I'm not sure if it will work on the rest of the servers, but it's worth a try
    Regards
    Alex

  • How can I solve ORA-29278: SMTP transient error: 421 Service not available

    Hi
    I have two different Solaris Server (Server1 & server2).
    In both the server SMTP server is configured.
    In these two solaris server (Server1 & server2) we have installed Oracle 9i
    I am using client machine to execute the following procedure.
    When I connect to server1 (using SQL plus) and execute the following procedure, it works fine, and able to send emails properly.
    But when I connect to server2 (using SQL plus) and execute the following procedure, I get the follwoing error.
    Could you please help me to resolve this?
    Connected to:
    Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
    With the Partitioning, OLAP and Oracle Data Mining options
    JServer Release 9.2.0.8.0 - Production
    SQL> set define off
    SQL> set serveroutput on size 1000000
    SQL> BEGIN
    2 mail_files( 'localhost',
    3 'Frm',
    4 '[email protected]',
    5 'From production',
    6 'Test message from production',
    7 9999999999,
    8 NULL,
    9 NULL,
    10 NULL,
    11 0 );
    12 END;
    13 /
    BEGIN
    ERROR at line 1:
    ORA-29278: SMTP transient error: 421 Service not available
    ORA-06512: at "SYS.UTL_SMTP", line 17
    ORA-06512: at "SYS.UTL_SMTP", line 96
    ORA-06512: at "SYS.UTL_SMTP", line 327
    ORA-06512: at "PROD_L.MAIL_FILES", line 238
    ORA-29278: SMTP transient error: 421 Service not available
    ORA-06512: at line 2
    SQL>

    Hi
    I have two different Solaris Server (Server1 & server2).
    In both the server SMTP server is configured.
    In these two solaris server (Server1 & server2) we have installed Oracle 9i
    I am using client machine to execute the following procedure.
    When I connect to server1 (using SQL plus) and execute the following procedure, it works fine, and able to send emails properly.
    But when I connect to server2 (using SQL plus) and execute the following procedure, I get the follwoing error.
    Could you please help me to resolve this?
    Connected to:
    Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
    With the Partitioning, OLAP and Oracle Data Mining options
    JServer Release 9.2.0.8.0 - Production
    SQL> set define off
    SQL> set serveroutput on size 1000000
    SQL> BEGIN
    2 mail_files( 'localhost',
    3 'Frm',
    4 '[email protected]',
    5 'From production',
    6 'Test message from production',
    7 9999999999,
    8 NULL,
    9 NULL,
    10 NULL,
    11 0 );
    12 END;
    13 /
    BEGIN
    ERROR at line 1:
    ORA-29278: SMTP transient error: 421 Service not available
    ORA-06512: at "SYS.UTL_SMTP", line 17
    ORA-06512: at "SYS.UTL_SMTP", line 96
    ORA-06512: at "SYS.UTL_SMTP", line 327
    ORA-06512: at "PROD_L.MAIL_FILES", line 238
    ORA-29278: SMTP transient error: 421 Service not available
    ORA-06512: at line 2
    SQL>

  • UTL_SMTP fails:  SMTP transient error: 421 Service not available

    Hi!
    I´m trying to set up database to be able to send emails by UTL_SMTP package.
    I´m working whit Oracle 9.0.2.0.7 on Windows 2003 Server EE SP1
    For this, I have searched a script of the many on the network. One like this:
    CREATE OR REPLACE PROCEDURE CASIUS.SEND_MAIL(SENDER IN VARCHAR2, RECIPIENT IN VARCHAR2, SUBJECT IN VARCHAR2, MESSAGE IN VARCHAR2) IS
        MAILHOST CONSTANT VARCHAR2(3000) := 'server.exchange.test.com';
        MESG VARCHAR2(30000);
        MAIL_CONN UTL_SMTP.CONNECTION;
        BEGIN
            UTL_SMTP.QUIT(MAIL_CONN);
            MAIL_CONN := UTL_SMTP.OPEN_CONNECTION(MAILHOST, 25);
            UTL_SMTP.EHLO(MAIL_CONN, MAILHOST); 
            UTL_SMTP.COMMAND( MAIL_CONN, 'AUTH', 'LOGIN ');        
            UTL_SMTP.COMMAND( MAIL_CONN, UTL_RAW.CAST_TO_VARCHAR2( UTL_ENCODE.BASE64_ENCODE( UTL_RAW.CAST_TO_RAW( '[email protected]' ))));
            UTL_SMTP.COMMAND( MAIL_CONN, UTL_RAW.CAST_TO_VARCHAR2( UTL_ENCODE.BASE64_ENCODE( UTL_RAW.CAST_TO_RAW( 'testpassw')))); 
            MESG := 'Date: ' ||
            TO_CHAR( SYSDATE, 'dd Mon yy hh24:mi:ss' ) || CHR(13) || CHR(10) ||
            'From: <'|| SENDER ||'>' || CHR(13) || CHR(10) ||
            'Subject: '|| SUBJECT || CHR(13) || CHR(10)||
            'To: <'||RECIPIENT || '>' || CHR(13) || CHR(10) || MESSAGE;
            UTL_SMTP.EHLO(MAIL_CONN, MAILHOST);
            UTL_SMTP.MAIL(MAIL_CONN, SENDER);
            UTL_SMTP.RCPT(MAIL_CONN, RECIPIENT);
            UTL_SMTP.DATA(MAIL_CONN,MESG);
            UTL_SMTP.QUIT(MAIL_CONN);
        EXCEPTION
            WHEN OTHERS THEN
            RAISE_APPLICATION_ERROR(-20004,SQLERRM);
    END SEND_MAIL;
    I've reviewed the script many times and I find no error. But when I call it I always have this error:
    ORA-20004: ORA-29278: SMTP transient error: 421 Service not available
    I have done many tests. Although the most meaningful test that I have done may be the send of a message via telnet  from the same server using the same parameters. It has worked!. This is the log:
    220 server.exchange.test.com ESMTP Service ready
    AUTH LOGIN
    334 VXNad23hsdj2bWU6
    bm90aWZpY2FjaW9uZMSA12smVsQHNvcG9ydGUtc21zLmVz
    334 UGFzer24cmQ6
    TDRdE3p6NA==
    235 LOGIN authentication successful
    MAIL FROM:<[email protected]>
    250 MAIL FROM:<[email protected]> OK
    RCPT TO: <[email protected]>
    250 RCPT TO:<[email protected]> OK
    DATA
    354 Start mail input; end with <CRLF>.<CRLF>
    From:Yomismo
    TO:Mimismo
    Subject: Test Send Emails
    This is a send test
    250 <522DCAD000D5FF89> Mail accepted
    QUIT
    221 server.exchange.test.com QUIT
    Connection to host lost.
    This test email was received for me, so I think is evidenced that the problem is in ULT_SMTP package.
    And more specifically, I suspect that the exception raises on one of these lines:
            UTL_SMTP.QUIT(MAIL_CONN);
            MAIL_CONN := UTL_SMTP.OPEN_CONNECTION(MAILHOST, 25);
    But I don´t understand why, All the sites I have viewed uses package of similar way...
    Can someone throw me some light on this issue?
    Regards

    maybe you find something in https://community.oracle.com/message/3560073. And I would recommend to think about upgrading to a current Oracle version, since 9.2 has been desupported around 2007.

  • ORA-29278: SMTP transient error:421 Service not available on oracle 10g

    HIi,
    I am trying to send e-mails by using PL/Sql procedure . I am using UTL_MAIL/UTL_SMTP on oracle 10g R1 database.
    There is no problem in creating procedure,but when i am doing execution i am getting the mention error.
    I am trying to send mail with attachment as excel file.
    ORA-20001: The following error has occured: ORA-29278: SMTP transient error:
    421 Service not available
    ORA-06512: at "SCOTT.MAIL_ATT_RAW", line 64
    ORA-06512: at line 1
    -----my procedure code------
    CREATE OR REPLACE PROCEDURE mail_att_raw(filename varchar2) AS
    fil BFILE;
    file_len PLS_INTEGER;
    MAX_LINE_WIDTH PLS_INTEGER := 54;
    buf RAW(2100);
    amt BINARY_INTEGER := 2000;
    pos PLS_INTEGER := 1; /* pointer for each piece */
    filepos PLS_INTEGER := 1; /* pointer for the file */
    filenm VARCHAR2(50) := filename; /* binary file attachment */
    data RAW(2100);
    chunks PLS_INTEGER;
    len PLS_INTEGER;
    modulo PLS_INTEGER;
    pieces PLS_INTEGER;
    err_num NUMBER;
    err_msg VARCHAR2(100);
    resultraw RAW(32000);
    BEGIN
    /* Assign the file a handle */
    fil := BFILENAME('BFILE_DIR', filenm);
    /* Get the length of the file in bytes */
    file_len := dbms_lob.getlength(fil);
    /* Get the remainer when we divide by amt */
    modulo := mod(file_len, amt);
    /* How many pieces? */
    pieces := trunc(file_len / amt);if (modulo <> 0) then
    pieces := pieces + 1;end if;/* Open the file */
    dbms_lob.fileopen(fil, dbms_lob.file_readonly);/* Read the first amt into the buffer */
    dbms_lob.read(fil, amt, filepos, buf);/* For each piece of the file . . . */
    FOR i IN 1..pieces LOOP/* Position file pointer for next read */
    filepos := i * amt + 1;/* Calculate remaining file length */
    file_len := file_len - amt;/* Stick the buffer contents into data */
    data := utl_raw.concat(data, buf);/* Calculate the number of chunks in this piece */
    chunks := trunc(utl_raw.length(data) / MAX_LINE_WIDTH);/* Don't want too many chunks */
    IF (i <> pieces) THEN
    chunks := chunks - 1;
    END IF;/* For each chunk in this piece . . . */
    FOR j IN 0..chunks LOOP/* Position ourselves in this piece */
    pos := j * MAX_LINE_WIDTH + 1;/* Is this the last chunk in this piece? */
    IF (j <> chunks) THEN len := MAX_LINE_WIDTH;
    ELSE
    len := utl_raw.length(data) - pos + 1;
    IF (len > MAX_LINE_width) THEN
    len := MAX_LINE_WIDTH;
    END IF;
    END IF;/* If we got something, let's write it */
    IF (len > 0 ) THEN
    resultraw := resultraw || utl_raw.substr(data, pos, len);
    END IF;
    END LOOP;/* Point at the rest of the data buffer */
    IF (pos + len <= utl_raw.length(data)) THEN
    data := utl_raw.substr(data, pos + len);
    ELSE
    data := NULL;
    END IF;/* We're running out of file, only get the rest of it */
    if (file_len < amt and file_len > 0) then
    amt := file_len;
    end if;/* Read the next amount into the buffer */dbms_lob.read(fil, amt, filepos, buf);
    END LOOP;/* Don't forget to close the file */
    dbms_lob.fileclose(fil);
    SYS.UTL_MAIL.SEND_ATTACH_RAW(sender => '[email protected]', recipients => '[email protected]',subject => 'Testmail', message => 'Hallo', attachment => resultraw, att_filename => filename);
    EXCEPTION
    WHEN OTHERS THEN--dbms_output.put_line('Fehler');
    raise_application_error(-20001,'The following error has occured: ' || sqlerrm);
    END;
    Please suggest me what settings i need to change. This same procedure is running on another maching,but not on my machine.
    If somebody is having any other simple procedure ,please help me.
    My SMTP port -25
    Thanks in advance.

    Hi Justin,
    Please get the answers of your queries
    The error you're getting is coming from the SMTP server you are trying to connect to.
    - What SMTP server is your database configured to use?
    Reply - I am using IIS(5.0)
    - What SMTP server is the database where this code is working configured to use?
    Reply - Same IIS. Database is installed locally on my machine only. I am trying to send mail locally to me only,Not to the outside person.
    - Has the SMTP server been configured to allow connections from both machines?
    Reply - Yes
    One more query, do we really require to set the SMTP_OUT_SERVER parameter for SCOPE=BOTH
    ALTER SYSTEM SET smtp_out_server = '172.16.1.10' SCOPE=BOTH
    I am not able to set like this for BOTH,only for SPFILE i can set ?.
    My SMTP Server IP=172.16.1.10
    PORT- 25
    Thanks
    Manoj

  • Account blocked due to customer service error

    I contacted customer services via chat, in order to remove my accounts linked to my second e-mail adress. But suddenly, I realized I was disconnected from my other account linked to my first e-mail adress (another mail adress). Now, my account (the one I am using) is blocked without any reason, due to the mistake of the customer services. They deleted all my accounts:Even though I put the right password I cannot connect to my account ! I filled forms, on net, but no result !  They suggest me to create a new one, but I want to keep my account, my contacts ! 

    Most unlikely. Legitimate emails from Apple will be addressed to you by name; and if you hover the mouse over the link they provide you will probably find it's obviously not an Apple URL. Do not follow such links  - they are trying to access your bank info to steal your money. If the email claims to come from your bank, contact them directly if you have any doubts; again, don't follow any links in such an email.

  • Upgrade to Creative Cloud 7 days ago - still no access to full products customer service not helpful

    I upgraded to the full Creative Cloud access on the 13th of April through customer service. I saw a promotional offer for $29.99/month for access to all the CC apps, but since I was already signed up for Premiere Pro CC at $19.99/month it said I needed to speak to customer service to upgrade.
    I did that. The customer service rep upgraded my service to $29.99/month and assured me that I would now have access to the full creative suite.
    You can see that I was billed for $29.99 on April 13th:
    After that upgrade nothing changed on my end. I had full access to Adobe Premiere CC like before, but otherwise all other programs(photoshop, illustrator, etc) still downloaded and ran as trial versions. I contacted customer service two more times. They were unable to resolve the problem and only escalated the ticket.
    I have not had any response from either ticket. And looking at it now it looks like one of them is listed as "withdrawn" with no notes from Adobe's end and no resolution to my problem. The other ticket is still open pending Adobe's response.
    To top it all off today in Premiere CC I received a notice that I would lose access to Premiere in 5 days because of some error in the billing information. So in 5 days time I will be paying $29.99/month and have access to zero Adobe products.
    So I'm writing this post in hopes of actually getting someone that can solve my problems to take a look. I don't want to spend another 2 hours in a chat-box with an overseas customer service rep who only copys and pastes pre-formatted responses to me. I don't want my ticket escalated and then ignored. I want the service that I paid for, or I want my money refunded.
    What I think happened is that the customer service rep who upgraded my membership to the full creative cloud suite forgot to flip some switch. It seems like they increased my billing rate but didn't actually change my subscription.
    Here's the picture that shows exactly what service shows up in my account:
    Here's what my creative cloud app shows - notice that I only have access to trial versions of most of the software:
    Please don't tell me to try logging out of creative cloud, or deleting files on my end, or check my DNS settings, or any of that. I've been through it - twice - with your customer service reps already. It did nothing. The issue is on Adobe's side. Somewhere in some database my account is not set to full creative cloud access. There is nothing I can do on my end to rectify this.
    Please - I would either like this rectified, or have my money refunded. Anything else is unacceptable. And as a whole my experience with customer service has been frustrating, unhelpful, and not up to the standards I expect from a high-class company like Adobe.

    Have you logged out of your Cloud subscription and then back in?
    Chat Now button near the bottom for Activation and Deactivation problems may help
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
    or these
    Upgrade single to all Cloud http://forums.adobe.com/thread/1235382
    http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html

  • My account blocked; payment error? Can not open S...

    I am not able to operate my skype account.  Initially I got payment error due to this temporarily blocked
    still I am not able to open.  Request your help to de-activate
    Post transferred from blog article to Skype Account: Security-Privacy-Trust & Safety message board.
    Subject/title edited accordingly.

    Hi, Abuumar933, and welcome to the Community,
    You will need to contact Skype Customer Service directly in order to recover access to your account -- we here in the Community do not have the tools to do this.
    Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service
    Regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • Access metadata fields through a custom Service Class

    Hi all,
    I have to create a custom component for Oracle Content Server. I need to access metadata fields from a custom Service Class.
    Can you directly access metadata through a java class or to pass parameters (metadata fields) from a web page to java class? How?
    Are there other solutions?
    Thanks, ale

    I'm not sure if I understand exactly what you are after, but here is some information.
    If your url is http://someserver/idc/idcplg?IdcService=CUSTOM_SERVERY&Parm1=A&Parm2=B
    Then in your java code you can use the binder.getLocal method to get those values.
    String strParm1 = binder.getLocal("Parm1");
    you may have to use binder or m_binder (depends on the variable name in your specific situation).

Maybe you are looking for