Accounting document not cleared when billing document is cancelled.

Hi,
In ECC 6.0 when we cancel a billing document through vf11 in vfo3 we find the status as accounting document not cleared.
The general process is manually going to f-23 and clear customer line items of that invoice. After doing this the status become accounting documet is cleared.
My requirement is how to cancel the billing document without getting this message (accounting document not cleared) and not clearing the customer line items manually.
Can it be done through user exit/enhancement or by copying requirement vofm.
Please suggest.
Thanks
Edited by: sumesh on Jul 29, 2009 6:33 PM

They directly want the accounting document to
   be cleared when billing document is cancelled.
Though you can achieve this with the help of ABAPer, why dont you consider having a Posting block for your billing type so that as and when the billing documents are generated, you can release it via VFX3 in bulk or VF02 for individual billing document release to FI.
In order to achieve this, go to VOFA, select your billing type and execute.  There you can see a field "Posting block" where maintain a tick there and save.  With this control, first of all, you can ensure that before releasing F2 billing documents to FI, it is not cancelled.
thanks
G. Lakshmipathi

Similar Messages

  • Billing document not cleared when processing Payment cards in Sales order

    Hi,
    I am having an issue with Payment card processing (credit card). We are using SAP R/3 4.7. When I use manual authorization, the status of billing document still shows "A" incomplete. The status shows authorization successful but not settled in billing document.The accounting document when billed shows not cleared.We are not using any interface for credit processing. The authorization check is done outside of the system manually. We are planning to use manual authorization for all such transactions. I am not sure if any specific config is to be done or am I misssing something.
    Any inputs in this regard would highly be appreciated.
    Thanks!
    Sanjay

    Hello Sanjay,
    Please also check to see if the field VBAP-ABFOR is filled for the line item (This is the Form of payment guarantee). Without this field filled the billing does not know that the item will be covered by payment cards.
    VBAP-ABGES (Guaranteed (factor between 0 and 1)) should also be filled with 1.
    I hope this helps.
    Best regards,
    Ian Kehoe

  • Accounting document not posted from billing document SD module

    Dear Sir,
    I am encounting a weird issue in SD module, that is when I am saving the billing document the system will generate accounting document automatically from my ID but when the same process will perform from the other ID having same rights and previligies then system prompt the folllowing message .
    "Tax code C1 does not appear in any G/L account item"
    It means the system allow a specific user to post accounting document with reference to billing document but not allowing to post from any other ID.
    Apparently this issue related to basis module. we have checked in the basis area as well . still unable to get ane resolution for this issue.
    Best Regards,
    HASEEB KHAN
    MM,PP,SD CONSULTANT

    Hello Haseeb,
    In that case, I would suggest you check Change Message Control for Taxes follow following path in SPRO:
    IMG - Financial Accounting (New) - Tax on sales/purchases - Basic setting - Change Message Control for Taxes
    Check corresponding doc to it and go through different Application Area, particularly, FF
    Also refer SAP Note 495737 - Customizable messages in FI_TAX_SV_BSEG_BSET_GROSS
    Hope this can assist you in understanding
    Thanks & Regards
    JP

  • Accounting Document not cleared while billing

    Hi Experts,
    I am not an abaper!
    I tried creating a sales order (sold to party is taiwan)  Had a credit hold , Released it , created delivery ,
    Performed PGI, and finally i try to do the billing via VF01.
    When i do the billing account docment got generated but says not cleared.....
    I find these entries exactly.
    cocd   itm       pk       account          amount        profit center     partnerpc         trprt             plant.
    131     2        50       501210          1,000.00-      24002     24002          121             2075
    131     1         01       12100099          1,000.00                                          121     
    I am tryin to understand what went wrong?
    Is there some information available from this to find a fix?
    regards,
    Shawn.

    Hi,
    The accounting document is not cleared because you hav not received the payment from cutomer.
    1)Go to T.code F-32 give the customer number in the account field, Company code & Currency.Then click on on process item.
    2)Then search for your accounting document, then click on select all icon the line items it will be highlighted.
    3) After that click on deactivate items, all the highlighted items will now be deactiveted.After that double click only on your accounting document, then click on document overview button.
    4)After clicking on the document overview button you will taken to another screen, there you give the "PstKy" & "Account".After doing that click on process open items.
    5)There you will give the amount you have in billing document or accounting document.
    6) Then go to Menu bar click on  Document--> Simulate
    7)After that save the document .
    Then go to VF03 & click on the document flow you will find the accounting document is cleared.
    Regds......
    Sumit

  • Automatic clearing of credit note with its billing document

    Hi all,
    I have a problem during the "release to accounting" of an SD credit note.
    The real problem is about the automatic clearing of the credit note with the billing document that it refers.
    I have only one clearing criteria in customizing on the field ZUONR (assignment number), and the credit note have the right value (the number of the billing document).
    The SD billing document and its FI document have the same number, and the credit note too.
    When the credit note is passed to FI (release to accounting automatically), the user wants that it is also cleared.
    How can I do it? Can I do it?
    Thanks in advance
    Alessandra

    Does it work now if you run it?
    If not you need to run the clearing in test mode and see how it proposes to do the clearing?
    Are you saying you have a billing doc for say 100 Euro and a credit for 100 Euro.
    Both the credit and the billing doc have the same value in the assignment field and f.13 for account type "D" is just set to clear against ZUONR.
    If that is the case it should work, however check for small things like discount being due on the billing document and not the credit note and therefore the net amount of the billing document may be less than the credit note.
    Please award points if this is useful.

  • Accounting document not clearing even after payment posting.

    In document flow of may cash sale process showing the accounting document 123-- Not cleared.
    After payment receipts in FBCJ and posted & saved, eventhough the accounting data not clearing, but in FBL5N the report is updating, what can be the step i am missing to update the document flow TOP to BOTTOM cleared.
    Waiting for your replies
    Thanking you,
    Veera

    Dear,
    Kindly use the transaction F-32  (Clear Customer).  Select both Uncleared items or document numbers.
    Regards
    Ramesh

  • Automatic clearing of billing document error

    Hi All,
    When user try to cancel/reverse the billing document following error occurred.
    "no accounting document created". but when user try to release to accounting in VF02. it gives following message.
    "Automatic Clearing of Billing document 900000034 and cancel document 1000000070 not possible."
    Message no.VF208
    Diagnosis
    The system cannot clear billing documents and cancellation documents beacuse, for example individual item updating is deactivated.
    System Response.
    The Billing Document can be created.
    Precedure
    The FI Documents are cleared manually.
    Please help me
    Thanks
    Sap Guru

    Dear Friend,
    IMG - SD - Billing - Define Billing Types.
    Go to your BIlling Document Definition (T-Code - VOFA) & remove the Tick mark (Check) In POsting BLock Check box.
    This check box is located in General Control.
    Hope this helps...
    Reward if useful...
    Thanks,
    Jignesh Mehta
    98700 10230

  • Cenvat Suspense Account to be populated with Billing Document No.

    Hi,
    Cenvat Suspense Account gets credited when billing document is generated and the same gets debited when Sales Excise invoice is created. Is there a way to populate Billing document no. in both cases in the assignment field so that can be cleared automatically
    Regards,
    SAPFICO.
    Edited by: SAPFICO on Oct 10, 2010 12:05 PM

    You'll have to create a Substitution rule in GGB1 for the transactions and in that, you select User Exit as the parameter.  Then have your ABAP consultant to write some code to extract the Billing document number and fill the Assignment field of the Cenvat suspense account (you can default the GL Account number it in the program itself if you are using one account, which is normally the case).
    Then activate the substitution for the Co. Code in OBBH.
    Ravi.

  • Send Mail alert to customer when billing document is created

    Hi experts,
    My requirement is to send email alert to customers when billing document is saved.( in transaction VF01 ).
    I don't want to send any pdf format. I just want to intimate customer that the invoice is created.
    Searched forum and tried all possible ways. Please send the steps to configure the same.
    Request your valuable suggestions in this regard ASAP.
    Thanks in Advance.
    Regards,
    Farha.

    Hi,
    It is also similar to sending the PDF document through email.
    But in your case, it becomes easy. The program should take only the invoice number and send the invoice number through email to the desired email address.
    You have to configure the output type as normal as any other email output type.
    The logic has to be defined in the program.
    So there is no difference at the functional consultant level, the technical consultant should accordingly write the code to just send the invoice number.

  • How to display the button 'Down payment clearing ' in Billing document

    Dear Gurus:
        If I  used transation code F-39 ,I can do down payment clearing for billing document .But I want to do this in transation code VF01 .
        Can any one guide me how to do down payment clearing in billing document.

    Could you please share your exactly requirement.
    Regards,
    Manoranjan.

  • Smartform output to be sent as pdf when billing document is saved(VF01)

    Hello all,
    I`m facing a problem in transaction VF01.The requirement is,when user will save the newly created billing document in VF01 transaction ,the corresponding smartform (attached to respective output type ) should be converted and sent as pdf to ship-to party e-mail address.
    I`ve done the coding so that smartform is converted and sent through transaction VF02/VF03.
    But I`m facing problem in understanding how the program is automatically triggered when billing document is created.In VF02/VF03 it can be understood that on "Issue output To" and selecting respective output type,driver program is triggered and processing starts for mentioned routine in NACE.
    waiting for your valuable inputs...

    I hope process will go like this...
    1) when you use VF01 / VF02 & save, automatically RSNAST00 standard program will be triggered.
              2) This program will fetch the driver program & form from NACE transaction & it will execute the driver program.

  • Send to is not working when a document library is associated with work flow.

    Send to is not working when a document library is associated with work flow.
    question is when a workflow is tied to list send  to don't work ?
    we get a ntlm login prompt sphoradically, if we cancel the prompt we and reload the page we get the resultsen

    could you please give more detail about the issue?
    What kind of the workflow associated to the Library and what error you getting when trying to perform send to?
    check ULS logs...
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Transferred CS4 to new MacBook Pro, now some fonts will not work when PDFing documents from InDesign CS4. Help!

    I recently purchased a new MacBook Pro. I transferred my CS4 from my older MacBook Pro to my new computer, and although it seemed to be working fine now some fonts will not work when PDFing documents from InDesign CS4. These fonts are installed on my new computer, can be found in InDesign CS4, and work fine within the program but will not appear in PDFs. The letters turn into rectangles. Does anyone know why, and how to fix that?
    Help/input would be much appreciated. Thank you!
    Kristen.

    you should properly install adobe products, not move, migrate or otherwise transfer them.
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.5 (win), 5.5 (mac) | 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • SAP R/3 in order status showing accounting documnet not cleared

    Hi All,
    SAP R/3 in order status showing accounting documnet not cleared but when i checked in billing document and customer account its showing posted but order showing...same error.
    Thanks in Advance..
    URS,
    PURI......

    Hi Venkat,
           Please Check the Billing Document its Transfer Status must have been Indicating Not Transferred to R3,Since the Order has Errors in it the Billing Document, Error Order's does not replicate to R3 so the Sales Order need to be made Error Free and Then try to Repost the Billing it shall get Transferred to R3.
    Please Suggest the error in Sales Order for Further Help
    Hope is Answers your query
    Thanks and Regards,
    RK.

  • FI Document Summarization for SD Billing Documents

    Hi Gurus,
    Appreciate if you can please let me know the configuration and process of FI Document summarization for sd billing documents where, there are more that 10000 line items in one billing document. And how can we do clearing of multiple accounting documents against one billing document when we recieve payment.
    Thank You

    Hello,
    The summarization of FI items for SD billing documents are done in transaction OBCY. The steps to configure it is explained in note 36353:
    1) Enter in transaction OBCY
    2) Inform Reference Transact. VBRK
    3) Add the following fields:
              BSEG     MATNR
              BSEG     MEINS
              BSEG     MENGE
              BSEG     PAOBJNR
              BSEG     POSN2
              BSEG     VBEL2
              BSEG     WERKS
    Be informed that the content of those items will be deleted in FI document.
    The information above will help you to configure summarization of FI items for SD billing documents.
    Kind regards,
    Cintia.

Maybe you are looking for

  • Satellite A60-652: ati2dvag driver has stopped working

    Hello, Recently I have some problems with my graphics. My satellite freezes up, and goes to a low resolution with a few colours. A message says the ati2dvag driver has stopped working. After rebooting the satellite shows a blue screen and reboots...s

  • Animated gif don't see

    Hello: I have imported an animated GIF in Director MX and when I drag to the stage I don't see the image in the stage (only an empty square) In the cast I see the first image of the animated GIF. I imported with the Menu Insert/Media Element/Animated

  • IMac 24" with washed out colours - Help!

    My iMac 24" Aluminium (June 2008) running 10.5.8 has behaved impeccably for almost two years. I use it for graphics and photographic work, so colour fidelity is very important. A few days ago, in the morning, the machine was still "perfect". By lunch

  • Problems running 8.1.5.0.2 patch...

    Hi there... I4m trying to install those 81501 and 81502 patches for 8i and I4ve found this problem : $ORACLE_HOME/precomp/demo/proc/demo_proc.mk $ORACLE_HOME/precomp/public/bits/mathcalls.h didn4t work because ????? $ORACLE_HOME/precomp/demo/ $ORACLE

  • Problems in table bindings

    Hell All I have some problems in table data binding. I created JSF portlet that consists of two pages and I added a table in each page and created two java classes that extend ObjectListDataProvider and provide Data for the tables. the problem is tha