Accounting Entry for Material has Standard Price

Hi,
If Material has standard price option, what is the accounting entry for the time of Direct Goods Receipt and from the production.
Material Value is : Rs. 100/-
Purchased value is : 90/-
from production : 110/-
Thanks in advance

Hi,
In STO, material posting with price valuated from issuing plant price. In your case, the transportation cost, you can capture to separate G/L account and pay to transport vendor.(In STO , one plant is vendor and another plant is customer, so a third party vendor involved for material transfer)
OR else use separate own Custom Condition Type with Special Condition Category instead of condition type P101 which have Condition Category "G", only responsible to pick the internal price
Regards,
Biju K

Similar Messages

How to stop Accounting Entries for certain Movement Types

Hello,
We are using Movement Type 511 to record free of charge receipts from vendors. Still it is generating Accounting Entries with Standard Material Price.
Is there any way to stop Accounting Entries for 511 and other Movement Types, where external business partners are involved ?
I tried IMG Setting "Define Account Grouping for Movement Types", where I did not tick in the field "Value Updates". But it did not work.
I believe, Account Grouping settings at the level of combination of Plant and Material Type takes precedence. There I have ticked in the field "Value Updates". So even if create a new Movement Type, with no tick in the field "Value Updates", it creates Accounting Entries for free of charge receipts from vendors.
Is there any way to stop any accounting entries in such cases ?
Basically I want 311-like movement type, but where external business partners are involved.
Thanks and Regards

Hello,
Thanks to you all for your quick reply.
I created a new Movement Type - copied it from 511 and made the changes as per your suggestions - disabled field "Value Update" in "Update Control / WM Movement Types".
Using MIGO when I try to receive the material, it gives me error "Update Control of Movement Type is Incorrect"
Any reason for this error ? I have disabled even "Check Account Assignment" in Account Grouping
Thanks and Regards

Wrong accounting entry for FRB2 (Freight Value)

Dear All,
Wrong accounting entry is happening for Freight value for a standard PO.
Rs. 300 was maintained in PO for this condition type, GR is done for full qty. but Accounting entry is Material cccount Rs. 156.24 to Freight clearing account.
Please help me on this issue
Regards
Prashant Atri

PO was created with 3 line items with each line item having freight condition type FRB2 - Freight value
For first line item it is Rs.200 for 1,008 quantity
For Second line item it is Rs.300 for 7,200 quantity
For Third line item it is Rs.300 for 2,604 quantity
GR was done for 3rd line item for the entire PO quantity 2604, but the frieght value is flowing only Rs. 156.24
1) Material is valuated at Standard Price.
It is Valuated at MAP
2)Condition type- FRB2- Rs 300 is entered at the Header Level and it is marked as a Group condition because of which it got apportioned to all the line items in the Purchase Order.
It is entered line itemwise with Rs.300 to the third particular line item and there is wrong flow of freight value for other line items too in GR.
Is Freight Condition type is a header condition and also check is it a group condition ( in t.code: M/06)
It is a header condition but not group condition and the values for frieght were given line item wise.
Need help to resolve this.
Edited by: prashantatri on Sep 2, 2011 12:14 PM
Edited by: prashantatri on Sep 2, 2011 12:15 PM

Accounting Entries for Materials Return from Production Order

Dear Gurus,
I have a scenario here that a raw material, valuated at moving average = 151 and qty = 100, was issued to a production order last month. Due to some issue the order was not completed for a while and 93 qty was consumed for the order and because the remaining 7 were excess they were returned to the storage location. By that time the MOV had changed from 151 to 185 and the 7 qty was returned not at 151 (which would be correct) but at 185. This is a wrong accounting entry as it is showing an under consumption for the order.
Anyone have an idea why the system is doing this because the material should be returned on the price it was issued at so that the accounting entries are knocked off (The accounting entries for return deliveries to vendors are of the same price that they are recieved no matter how ever long a period they are returned). How do we stop the system from doing so and if it cannot be done what is the solution to the scenario.
Regards,

The normal entires are as follows (depending on your configuration);
1) Goods issue;
Credit inventory and debit COGS;
2) Billing document;
Debit customer account credit sales accounts;
3) Payment;
Credit customer account and debit cash/ checking account
pls assign points if helpful as a way to say thanks.

Accounting Entry for Depot Excise Invoice

Hi Gurus
We make a STO from factory to depot. I have posted the depot excise invoice via J1IJ but Im unable to see the accounting entry for the excise invoice..
Im able to see the acounting entry for excise invoice for factory sales thru J1IIN..
Pls advise
Rgds..Vinz

Hi Vinz,
I would like to explore more for ur info.
When u create Excise invoice at Factory Using J1iin, accounting entries flow to the system. When u transfer it to Depot, u credit the Excise amount using MIRO and post it to RG23D ( Depot Register)
The value of the excise for which u have taken credit from ur factory would be passed on to customer now.
If you notice carefully, when u take credit of Excise entry in RG23d No accounting entry flows in the system, only value & qty gets updated to Register.
Generally, while deciding the selling price from depot u consider Basic price + Excise duty. since u are passing on the excise benefit to customer, using proforma excise invoice (transaction J1IJ)
So there is no wuestion of accounting entries.
Hey CIN Gurus.. correct me if i am haveing any misconcepts regarding this.
Hope this is clear to you now..
Reward if helpful..

Clarification on account entries for goods receipt

Hi Experts,
I have my accounting document for a goods receipt as follows. I understand that 3 sets of entries refer to 3 different SKUs in the GR. However I do not understand the purpose of having 3 sets instead of one clubbed double entry. Is there a way to track back to the corresponding GR line?
Any help is much appreciated.
Thanks in advance,
Em Jay

Material document number is stored in table MSEG and MKPF and accounting document number is stored in table BKPF and BSEG.
You can find the relation in table, you have to compare this BSEG table with MSEG table,
You will find the PO number (EBELN) and line item number (EBELP) in both table.
The EBELP will be same for each line item of accounting entry and material document number.
BSEG table
And MSEG table
Although you can assume there will be a sequence for material document number and accounting document number.
Suppose you have the 3 sets of accounting entry. The 1st set is for the first line of material document number, the 2nd set id for the second line item of material document number and the 3rd set is for the third line item of material document number.

Accounting entry for MFBF

Dear Guru,
When we are doing MFBF ,GI accounting entry is getting generated but the GR accounting entry for mvt type 131 is not
getting generated instead its going for mvt type 571.
Thanks in advance.

Hi Kamala,
In the case of sell in the above example, Dr forex postiion account with 100$, but it is essentially Eur 94 and the corresponding amount in local currency which is USD in your case. If at all it happens that you are selling EUR at the market rate itself such that your amount in local currency for EUR sale and the amount in USD for Buy are same, then there will no gain/loss.
But essentially your contract price will be different than the prevailing market price. In that case there will be gain or loss posted.
Regards,
Ravi

Accounting Entry for Outgoing Payment

Dear experts,
I am currently doing PLD for outgoing payment. Just want to know how I can include in the disbursement voucher I am doing the accounting entries for this., Example:
Accounts Payable (Control Account) 20,000.00
Cash in Bank MBTC (GL account of the chosen Bank account) 20,000.00
Thanks
Sandra

You may check this thread to have a reference:
Re: Branch Code in a bank transfer summary report
Thanks,
Gordon

Wrong Accounting Entry for Rejection Excise Invoice through J1IS

Dear Experts,
When we are doing Rejection of Excise Invoice through J1IS, a wrong accounting entry is getting generated by system.
Where can I check the settings for Accounting Entry for Rejection Excise Invoice?
Thanks & Regards,
Reshma

Generally Excise Invoice for other invoice posting will be done through J1IV after creating Excise Invoice for other Movements in J1IS.
If Automatic Posting is activated against your excise group then you need not again to post J1IV. It happens along with J1IS.
By the by how you are returning Excisable goods through Return delivery with Original invoice 122 or through Return Purchase order 161 Movement type.
Have you entered Excise Rates BED, ECS and SECS in J1IS?
Elaborate in detail.

Accounting Entries for Stockable Expense Item

Hi all
I have set an item as being expensed, inventoried, stockable and
transactable.
When I do a purchase order and a receipt on the item I get the accounting
transactions for the receipt part (debit receiving inv account and credit
inv AP accrual). However, there is no transaction on the deliver part
(normally debit the expense account and credit the receiving inv account).
If the item is set as non inventoried I get the accounting entries for
receipt and deliver.
I believe that we should be able to set an item as expense and stockable and
get the appropriate entries in Oracle Purchasing. What could be the problem?
Thank you.
Belinda Chavremootoo
null

Prakash,
I guess You can create a test Internal Order and check ., shouldnt take a long time

Accounting entries for Foreign currency revaluation..Accounting entries

Dear All,
Can any one tell me the Accounting entries for posting foreign currency and foreign currency revaluation..
Regards,
Suresh Patipati.
Edited by: suresh patipati on Feb 17, 2009 7:45 AM

Hi,
I will mention entries from Vendor point of view on that basis you can get the idea.
1. If there is a Unrealised loss.
Unrealised loss A/c...............Dr.
To Balance Sheet Readjustment A/c......Cr.
2. If there is a Unrealised Gain.
Balance Sheet Readjustment A/c......Dr.
To Unrealised Gain A/c.....................Cr.
3. If there is a Realised Loss.
Realised Loss A/c......Dr.
Vendor A/c.................Dr.
To Bank A/c.......................Cr.
4.If there is a Realised Gain.
Vendor A/c..........Dr.
To Bank A/c....................Cr.
To Realised Gain A/c.......Cr.
Best Regards,
Shridhar

Accounting Entries for Order to Cash

Hi,
Please give me the accounting entries for flow of Oder to cash. What are the entries from starting of SD Order to Fianl Customer Payment.
Thanks,
SRK

The normal entires are as follows (depending on your configuration);
1) Goods issue;
Credit inventory and debit COGS;
2) Billing document;
Debit customer account credit sales accounts;
3) Payment;
Credit customer account and debit cash/ checking account
pls assign points if helpful as a way to say thanks.

Cost Run for Raw Material taking Standard Price instead of Moving Price

Hi all,
We ran a material costimate with normal components FG>SFG>RM. The RM price Control is set to
V (Moving Average Price) and for SFG & FG it is S(Std. Price). After we run CK11N, the price for
RM in Material Master changes as per Moving Price. We found that the RM Component is
costed based on Standard Price and not on the previous cost run Moving Average Price. After
certain period, if we again do cost run, the sytem is again picking up the standard price for costing
not the revised Moving Price. We have checked the Valuation Variant in the Costing Variant, where the strategy given is 1. Moving Average Price 2. Standard Price. We also tried to change the
sequence as 1. Price as per Purchase Info Record 2. Moving Average Price and 3. Standard Price and
also 1. Standard Price and 2. Moving Average Price. Our requirement is when we run the cost estimate the raw material has to pick the price of previous moving price stored in the Material Master. Kindly tell us where to set the indicator.
Thanks,
Sadashivan

Hi Srikanth,
Problem solved. I checked the sequence in Valuation Variant and modified in Valuation Variant for Plant which I have not set previously and now the system is working correctly.
Thanks,
Sadashivan

Accounting entry for 'V' price materials

Hi,
I know that for Finished and Semi Finished we use 'S' - Standard price and 'V' for Raw materials.
When new cost updated to the existing finished materials at that time price difference account will come into picture, if any price change occurs.
But if we mainated 'V' for Semi finished and finished, if any cost updated and price changes, what will be the accountiny entry.
Thanks
Sateesh

closed

Accounting entries for initial stock upload (URGENT HELP NEEDED)

Dear all,
I wanna confirm following are my accounting document entry kindly confirm if it is right.
CO.Code Itm PK SG Account Description Amount Curr.
2000 1 91 235199 Balance Upload Account 12.000,00- SAR
2000 2 86 411520 Price Difference Acc. 1 2.000,00 SAR
Can any one confirm me that my entries are correct or not??????????
Regards,
qsm sap
Edited by: qsm sap on Feb 12, 2008 7:41 AM

Hi,
For loading HALB or FERT items (Materials with Price Control S)
correct way is to run Standard Cost Estimate and then Upload the stock with Qty only , here system will take the Standard price from the material master,
In the a/c entries you have written it appears that Material is of "S" type and price is maintained as 0 (Zero) in master that's why all the Intial stock value has gone on to PRD account,
If you are not using standard Cost estimated (or not in a position to do that) but still have the correct stock qty and value with you, what you should do is :
Change the price control to "V"
Load the stock with qty and value, (system will calculate MAP and update the Material master),and there is no question of hitting PRD account
After all the Stock is uploaded for the material , change the Price Control to "S"
system will take the prevailing MAP at this instant as Standard Price for all future transactions

Accounting Entry for Material has Standard Price

Similar Messages

Maybe you are looking for