Acquisition tax group cannot be used this way

Dear Experts,
I'm trying to generate a Journal Entry using SBO 2007 SP01 using 2 accounts.
When I click on create boutton I get the following error message:
DSC1 - The acquisition tax group cannot be used this way for this transaction - Message 200-48.
Could you please tell me whu do I get this error and cannot create the JE?
Thanks a lot for your help.
Kind regards,
Walid.

Dear Gordon,
I desactivated the SP and the result is always the same.
Do you know what does this message concretely mean?
Thanks for your help.
Walid.

Similar Messages

  • "Group  cannot be used" in cj40 tx

    Dear all,
    Need your help in to resolve this issue.
    I am trying to do cost planning using the tcode CJ40 and am following the steps mentioned below,
    1) I created a cost element group in KAH1. All the cost elements have been created in the same controlling area and i have checked the validity of these cost elements.
    2) I assigned this cost element group in transaction OPSB.
    3) Now ,when i am executing transaction CJ40 and clicking on the Primary Costs button i am getting following error
    "Group  cannot be used
    Message no. K8001
    Diagnosis
    Group  has not been created in controlling area  for the characteristic used, neither does it exist as a node within the group.
    System Response
    The SAP System rejects the row/column structure for group .
    Procedure
    1. Create group  with the group maintenance transaction.
    2. Or, correct the name of the group in planning layout  or in the initial screen for planning."
    Request you to kindly correct me and help me in solving this issue. I have checked everything from my side.
    Thanks & Best Regards,
    sri

    Hi Srikanth,
    Please check the notes mentioned below. Hope you find them useful.
    99728, 121055, 99934
    Regards,
    Gokul

  • Cenvat related tax code cannot be used with freight

    Hi
    Error Cenvat related tax code cannot be used with freight . When i am try to save A/R Invoice i am getting this error.
    Scenario is
              Amount = 389000
              Packing Charges = 12000
              Sub Total = 401000
              BED = 64080
              CESS/Others = 1923
              Vat 2 % = 17340
             Total = 884343.
    Thanks

    Hi,
    Create packing charges in Freight
    Administration --> Setup --> General --> Freight
    and when u will create Tax code, there is one check box in right upper side (Freight),
    unable the check box so you can use the tax code in freight.
    I hope this will solve your issue.
    Regards
    Kamlesh Vagal

  • From iPhoto. I simply took a PDF and saved it to iPhoto as a photo and then sent it as an embedded "photo" that was my document. Since changing to Lion, I cannot do it this way. Help!

    I used to send embedded documents rather than as an attachmentfrom iPhoto. I simply took a PDF and saved it to iPhoto as a photo and then sent it as an embedded "photo" that was my document. Since changing to Lion, I cannot do it this way. Help!

    I found the solution on another post by user rbii:
    You can add this using Automator:
    - Run automator, select File->New, chose Print Plugin
    - From the PDFs part of the library drag "Render PDF Pages as Images" to the workflow on the right, set resolution to 200.
    - From the Photos part of the library drag "Import Files into iPhoto" to the workflow section.
    - Save the workflow
    That should get you back this feature."
    Save the workflow as "Save PDF to iPhoto" and you'll get that option back on the list. Hope this helps!

  • Changed my apple id however cannot now use this new password to finish setting up iCloud on new iPhone bought today. HELP

    Hello,
    This afternoon I bought a new iPhone 6! Everything was good until I needed to submit my Apple ID password to finish setting up iCloud. 
    I forget this password and so reset the password.  This password works on my computer however not on the iPhone when trying to complete setting up iCloud onto my new iPhone. 
    Can anyone please help!?
    Greatly appreciated!
    PastaTunaBake

    Make sure you are signed into iMessage and FaceTime with your current ID.  If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
    Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.)  Now go to Settings>iCloud, turn off Find My iPad and enter your current password when prompted (even though it prompts you for the password for your old ID).  Then save any photo stream photos that you wish to keep to your camera roll (unless using iCloud Photo Library).  When finished go to Settings>iCloud, tap Sign Out and choose Delete from My iPad when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address back to the way it was.  Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your device).

  • OS X Server - Can it be used this way?

    Want to teach myself CMS over the next couple of months while I'm on study leave - Saw that Mavericks allow a OS X Server - can I install this on my macbook pro and use a Joomla CMS System on it and teach myself CMS?  As i dont want to have to pay monthly server fees etc when I can just do it on my mac Would this work?
    Want to also be able to use the computer in a normal way too without devoting it to just the server...

    There is no need for Server at all. Joomla just needs Apache working and preferrably a MySQL install. Apache is already on your system and MySQL can be downloaded from Oracle. No cost and it's an easy install. Joomla is PHP and does not do anything on its own. So just install and start playing with. When you don't play and learn, nothing happens on you computer. If yoou want to there are preconfigured (VMWare) virtual machines available for download that are loaded with some Linux and ready to be used, everything installed and configured.
    Just go and download the latest Joomla and be happy
    ---markus---

  • Tabs: previous versions allowed for saving all tabs in a bookmark folder. The new tab groups do not behave this way. How can I save permanent set of tabs as a group that is available later, like the folder of bookmars was?

    tabs: previous versions of firefox allowed for saving all tabs with a group name, so you could open them all again later at your convenience. The new firefox 4.0.1 has a new tab feature, but the tab groups do not seem to persist once you shut down, and are not saved as a folder in your bookmarks. What am I missing? How can I do what I want (save permanent set of tabs as a group that is available later, like the folder of bookmarks was)? Thanks

    Right click one of the tabs, the "Bookmark all tabs..." option.
    Does it do what you want?

  • Error: the cabinet file required for this installation is corrupt and cannot be used.

    Hi, ive recently just built a brand new computer and purchased windows 7 64 bit. the system runs fine except for the fact that i cannot install any games (these include command and conquer 4, red alert 3 and sims 3. i go to install and partway through it stops with a message saying:
     "the cabinet file 'name.cab' required for this installation is corrupt and cannot be used. this could indicate a network error, an error reading from the CD ROM, or a problem with this package."
    At first i suspectd a faulty cd rom drive, but the same thing happend wen i tried it with another drive. i know the disks are fine because theyr new. iv searced online and tried things such as disabling the antivirus, going into command prompt and deleting the .....\SQMClient\DisabledSessions as administrator and anything else that was recommended, but it still cant seem to like cabinet files (btw when the installation stops it doesnt always stop on the same .cab as a previous attempt, sometimes it gets further through the installation than others). they install fine on other computes with windows 7 64bit.
    Any help is appreciated! Thanx

    Hi Dazattack, I suggest you check the following KB article first:
    Error message during Office 2000 or Office XP installation: "Error 1335 - Cannot Copy Cab File Office1.cab"
    http://support.microsoft.com/kb/314810
    Note: Though it's for Office, some steps in the article can still be used in such scenario.
    Meanwhile, can you install other applications that downloaded from the Internet ?
    Sean Zhu - MSFT

  • Proper Tax Group Setup

    I need help correctly setting up the Tax Groups for an EU company. I think that I have them set up correctly, but I keep SAP always wants me to enter a Federal Tax ID on the A/R Invoice, even when the EU BP is VAT liable.
    My current setup for a given BP (we are located in CZ):
    Condition #1: Sale to a customer in CZ with no VAT number
    Tax Status: Liable
    Tax Group: CZ (rate 19%)
    Condition #2: Sale to a customer in CZ with a VAT number
    Same as above
    Condition #3: Sale to a customer in EU with no VAT number
    Tax Status: EU
    Tax Group: EUN (rate 19%)
    This group gives me problems. SAP always wants a Federal Tax ID on the invoice. I have been using <CountryCode>000000000 forthe tax id as a work around. I assume that I can set the BP up as Liable, but will the tax amount show up in the EU section on the tax reports?
    Condition #4: Sale to a customer in EU with a VAT number (should not pay VAT)
    Tax Status: EU
    Tax Group: EU (rate 0%)
    Condition #5: Sale to a customer outside EU
    Tax Status: Exempt
    Tax Group: EX (rate 0%)

    Hi Dave,
    currently B1 is not equipped to deal with a private end-customer in another EU country, that includes version 2007 A.
    By definition, a document that carries a tax code tagged 'EU' must have a VAT number on the 'accounting' tab. Also by definition, any tax code that is tagged 'EU' will appear in the EU sales report.
    Using the dummy VAT number in the document is right now the only way to be able to add documents of such type.
    In the standard tax report you can select the tax codes which you wish to include, that includes EU-flagged codes.
    You might consider creating a new EU tax group with a rate of 19% & linking that to a particular account (check with the company accountant). This will make it easier for an auditor to distinguish between EU companies & private persons your customer works with.
    Cheers,
    Kerstin

  • Unused Tax Group Deletion

    Hi
    In our existing SAP system, we have five tax groups and we have assigned four tax groups to PA , PSA.
    But the last tax group Eg. 5 its not assigned for any PA and PSA. So customer want to delete the unused tax group.
    So here, if we delete that, what will be the impact? it may affect any payroll results?
    I need help for resolving this issue.
    Regards,
    Srinivas.S

    Hi Mahesh
    Thanks for your reply, here i have a doubt, coz now we are doing configuration in the existing live system. So where we can check like wherther this Tax group is preveiously used or not. Coz as of now its not mapped to any PA but i want to know in history level.
    Thanks & Regards,
    Srinivas.S

  • Error in Assiging the Tax Group - FF716

    I have created a new tax code for GL assignments for GST purposes on our ledger but when I try and post a GL Ledger entry using the tax code I receive the following error message "Error Assigning the tax group", Msg # FF716. 
    This tax code is for sales entries at zero percent for GL accounts where an output tax code is required.  I have not been able to find an appropriate SAP note on the SAP Support Portal for this error number or a clue as to the linkages between the tax code and the assigned tax group.
    This is the first tax code I have configured and have copied the config from existing tax codes that are currently functioning correctly.
    Can anyone please help.

    Hi,
    Please apply the correction of note 1292730 and test the outcome.
    I believe that the error FF716 is called due to a missing customizing or a customizing that is not correctly in place. Please can you check your tax customizing for your company code very carefully and take the LONG TEXT of the ERROR message into account going forward in resolving this issue.
    For example a tax procedure is assigned to a country which does not use Jurisdiction codes, but in TCode OBCL a jurisdiction
    is entered for the company code. Bottom line is, if no jurisdiction codes are used in the procedure then no assignment should be shown in OBCL.
    I hope this helps.
    Regards
    Ravinagh Boni

  • Selection of Acquisition tax in marketing documents

    Hi,
    i have the following problem:
    A supplier is located in a EU-Country and has Vat-Status "Acquisition".
    But when I create an purchase order for that supplier - the system select "normal" tax groups and not the right acquisition tax groups.
    For an item which is calculated with 7% tax - the system select A1-tax group but the right one is E2.
    Thanks for Help.
    Jacqueline

    Hello Jacqueline,
    SAP Business One checks whether a tax code has been defined for the Business Partner in the Accounting tab. If there is none, the system will take the tax code from the Item record.
    The above is further explained in Note 863103.
    I hope this helps.
    Regards,
    Lorna

  • Content query grouping field that use taxonomyfield display

    We have a term store in two languages (Es an En) and a variation system active
    I have a library that has a  Managed Metadata  field add
    When I add a content query in a spanish page that display the library content, and group the results using this taxony field, it shows me the group in english (metadata in english but I have them in both languages).
    What can I do?

    Have you tried using the Excel web part
    Display Excel content in an Excel Web Access Web Part

  • Why can't get the object "out" in this way?

    We use "PrintWriter out=response.getWriter()"to get a "out" object in Servlet and output text to webbrowser with it.But I think the PrintWriter is a class and Why can't I get the object "out" use this way:"PrintWriter out=new PrintWriter()"?I think the later is easier to understand.Anyone can help me?

    I check the Servlet API.The PrintWriter has a constructor with a abstract object Writer as it's parameter.I couldn't create the Writer object so I can't create the out object.Why it's constructor is protected by java?

  • FYI to all: Creative Cloud users cannot readily use BC Blog module.

    FYI for anyone who has been as confused as I have watching these videos on the adobekb.com site and tv.adobe.com about using the BC CMS Blogging modules....
    Creative Cloud users cannot readily use this feature that is discussed. We would have to pay an additional BC monthly charge in order to have the Blog module and other nifty stuff.
    If there is an Adobe staff member around, it would be nice to know if there are any plans to change this in the future considering we're already paying monthly for the Creative Cloud.
    Also, can you please point out somewhere in your tutorial videos that users will need to purchase the BC upgrade in order to take advantage of the blog module? It's unfortunate that this wasn't more readily apparent to me. I spent quite a bit of time trying to follow the monkeybar tutorial only to realize that the reason my BC interface looked nothing like the one shown in the video was because I didn't have the same BC package.
    For now I'll go the tumblr route I guess - since there doesn't seem to be another efficient option.
    Thanks!
    Best,
    Kelly Burr.

    I agree, it is disappointing to find out there's an additional charge on top of the Creative Cloud membership. There should be some access

Maybe you are looking for