ACR 7.1 RC Issue Not Fixed in ACR 7.1

The issue I identified in ACR 7.1RC is not fixed in the production release of ACR 7.1.  Maybe I did not explain this in enough detail, it's very easy to miss. 
1. Select a RAW file that was previously adjusted using PV2010.  When you open the file with ACR 7.1 it will open with PV2010 since the xmp file was saved with that process version. 
2. Click on the "!" next to the image and it changes to PV2012 with suggested slider settings.  Adjust one of the sliders in the Basic Panel - this is very important becasue if you don't adjust a slider the issue does not show up. 
3.  With the Basic Panel still selected, click on the three dashes to the right of the Basic Panel to get the pop down menu and select "Image Settings".  The image changes back to PV2010 with settings that are saved in the XMP file.  Now click on the three dashed again to get the pop down menu and "Custom Settings" is checked, but the image is displaying PV2010, not PV2012 like it should if "Custom Settings" is checked.  You just lost your PV2012 settings. ACR 7.0 does not have this issue. 
4. If in #3 above you select another panel before you click "Image Setting"  the first time you can switch between PV2010 and PV2012 by clicking "Image Settings" for PV2010 and "Custom Settings" for PV2012.   After you do this first in a panel other than the Basic Panel for the first time you can then do it in the Basic Panel without the problem occuring. 
I discovered this while converting images that were adjusted using PV2010 to PV2012 and like to compare the two Process Versions.  I did not have any problems with ACR 7.0, but when I installed ACR 7.1RC the issue occured.  I was hoping it would be resolved in the Production Release of ACR 7.1, but it's still there. 
I am using Photoshop CS6 on a Windows 7 Professional 64 bit computer, don't know if this same issue exists in Lightroom. 

None of the issues reported on this forum have been fixed in Camera Raw 7.1, near as I can see.
The Camera Raw 7.1 software was built on May 15, but Adobe appears to ignore beta feedback unless it's a real show-stopper.  I can only imagine the definition of "show-stopper" must include users' systems actually catching fire or something.
Camera Raw 7.1 puts columnar color artifacts like this into images, for example:
Compare the above to the same conversion done with Camera Raw 7.0:
Plus Adobe has removed several color-fringing reduction features without providing suitable substitutes.
I recommend eveyone avoid upgrading to this release.
-Noel

Similar Messages

  • 10.4.6 JPEG issue not fixed by the Combo Updater

    Hi,
    I have the Safari/WebKit issue of JPEGs not displaying (Safari, NetNewsWire) and running the Combo Updater just doesn't fix my issue.
    Does anyone have any other tips? I have tried this 4 or 5 times.
    this is the Combo I am trying:
    12:10 backspace:~/Desktop% openssl dgst -sha1 MacOSXUpdCombo10.4.6PPC.dmg
    SHA1(MacOSXUpdCombo10.4.6PPC.dmg)= c9fde5a23bcebd08149301b7ad300881a563c398
    mini   Mac OS X (10.4.6)   2gb/bluetooth/airport

    Welcome to Apple Discussions
    The Combo Updater fix has been the usual remedy.
    Two suggestions:
    Make sure "display images" is checked in your Safari Preferences>Appearance panel.
    If it is checked, move your Safari preference file (.com.apple.safari.plist - search for it in Spotlight) to the trash. Restart Safari. If there is no change, move the preference file back to its original location (User Library>Preferences folder). If it does work, go to Safari Preferences and restore any custom settings.

  • I can't believe it - network issues not fixed in Logic 8 ?

    I like to have my Logic Projects stored on a network volume but couldn't do it because Logic 7 had one major network problem. If an audio file in your project is located on a network volume then you cannot edit that audio file in the Sample Editor. All the commands in the functions menu are greyed out. Now I tried that in Logic 8 and to my horror, the bug is still there.
    I tried the scenario on different mounted volumes on my LAN and it is the same problem. Also creating cross-fades results in an -64 Error when trying to play back the cross-fade. Somehow the audio file (or directory path) is locked, at least as Logic sees it. The permission look ok. I set everything to read&write.
    Can somebody confirm that behavior.
    Here is the link to the threat on that issue in Logic 7:
    http://discussions.apple.com/thread.jspa?messageID=1880622&#1880622
    Strangely enough, if I use my iDisk as the network volume, then it works. At least that improved from Logic 7. But I have no idea why the local network volume still have problems.

    First of all, when I talk about network volumes, I talk about local network (LAN) not the internet, although you can do that to (i,e, iDisk).
    Here are some of the reasons why:
    * I like to have as little as possible data on the local drive(s): Projects, Apple Loops, EXS instruments/samples, plug-in data you name it.
    * All the data is stored on an XRAID in RAID5 mode that provides maximum security and an Xserve running OSX server acts as the file server
    * Easy central retrospect backups of the XRAID for off-stite storage (security)
    * When running a multi computer setup, i.e multiple Logic machines configured as one "über-Logic" (think about big EXS libraries, Vienna Instruments, etc), all the 100s of Gigabytes of data have to be stored only once (on the RAID)
    * Same storage access convenience when having a multi room stup: mixing room, production room or drop in with your laptop.
    * When editing one sound (i.e. EXS instrument) , that edit is available on all the Logic machines that access that network volume.
    * When swapping out a Logic machine, you don't have to deal with 100s of gigs of sounds and data stored on that machine.
    Networking should be on Apple's top ten list and I'm sure it is. Everything is about networking: Network MIDI (in Audio MIDI Setup Utility), Logic Node, Cluster compression (in Compressor), Bonjour, etc ...
    Logic is a professional DAW used in very professional setup. Putting Logic on an iMac to play with some dance loops is just one very limited use of it. Even the disaster version 1 of Cubase SX (5 years ago ?) allowed me to work with the song from the netwok volume.
    Logic 8 still not working properly in a network environment is really embarrassing, unless someone can report that it works and I'm just missing something here.

  • Screen junk issue not fixed with 10.5.2

    I'm still getting intermittent screen junk on my 30" monitor on my Mac Pro and also on my MacBook Pro. I was kind of hoping 10.5.2 would have fixed that. Nope.
    And Apple's web team needs to get on the ball and add a 10.5.2 option for the OS drop down menu option in the entry screen where I'm entering this.

    After reading about the problem in the April issue of MacWorld, page 96 I think, I brought the computer over to the Apple store, showed them the article, and they ordered me a new graphics card (well, it was a little more difficult and time-consuming than that, but you get my drift) - a more recent version of the card.
    Et voila!!! No more screen junk. Isn't that kewl?

  • Safari Download Issue not fixed by Safari 3.

    This question is still unanswered for me and I hope someone can help.
    I tried the demo of Yaszoft Speed Download, and when it ran out I uninstalled it. I haven't been able to do a clean download using Safari (or Firefox) since Safari just freezes (and Firefox just ignores the download command). Right-clicking works (sometimes) though.
    I've uninstalled SD multiple times, rebooted, what not, ran the Speed Download uninstalled, installed the latest SD, removed that, contacted the Yazsoft people (who told me to...run the uninstaller yet once more), and i'm still stuck with the problem.
    I upgraded to Safari 3.0 hoping that it would solve this once and for all -- no such luck. The Yazsoft people have basically concluded that this was not SD related. Although i started having this problem IMMEDIATELY after removing SD once the demo period had expired. The only solution, of course, would be to BUY SD, which, obviously, I'm not quite prepared to do...
    What can I do at this point? It makes downloading any program a pain in the neck, upgrading programs sometimes tricky. For instance, I had to download Safari 3 from my newer mac mini and then transfer that to my powerbook...
    (the problem is even worse in Firefox where downloading programs is almost impossible)
    Help would be greatly, greatly appreciated. Thanks !
    Powerbook G4   Mac OS X (10.4.9)  
    Powerbook G4   Mac OS X (10.4.9)  

    Have you tried WaveBurner yet?

  • APPLE - you have not fixed the WiFi issues

    OK, I admit that wifi has improved, bit it's not fixed. WiFi still stalls on loading pages.
    Yes it's faster, yes it is more reliable, but after a while, it does still stall. The same fix as before is anwork around, but it's not over yet. Not by a longshot.
    My current work around is to forget the network and re-join it. I'm down to twice a day now, not every five minutes, but seeing as my laptop can connect for over a week with out re-booting, this is definitely an Ipad issue.
    Come on apple, get your thumb back into the sunlight and fix it once and for all.

    I think a distinction between a router dropping connection a an iPAD that cannot maintain connection needs to be drawn.
    I have now taken 2 iPADS 3g back with exactly the same problem as in it cannot maintain a connection to the router from a distance of less than 20ft.
    I have six different items connected to my router, they are a printer, a nokia phone, 2 laptops, 1 Netbook and for a shortime an iPAD as well as my home pc
    NONE of the aforementioned items save for the iPAD have had connection problems to my 14 month old router.
    I can connect to my router with the laptops and netbook from my back garden without any problem, the printer remains in the same place which is quite close to the router, the Nokia phone connects anywhere I choose to connect.
    The Ipad can connect to my network 20ft from the router but cannot maintain a connection with it dropping out every couple of minutes and when it is connected it is very slow in loading pages. The netbook and the laptops and nokia from the same location report a good signal and upload/download times are fine...
    I have changed channels on the router, I've reset and updated the Ipad and rememberd to mess with the brightness but still I cannot maintain a connection.
    My router shows that it has been connected to broadband continuously for 5 weeks except when recently rebooting it as per the notion that it would help the iPAD reconnect.
    Simply put the iPAD does not perform, it is wholly unreliable where it's wi-fi is concerned and I do not think the latest patch was anything more than a tickle of the signal indicator etc....
    Neither do I think that routers should be reset with it changed from wep to wpa as suggested by others. My usual pc is an iMAC5, it has no connection problems, it talks to my router without any problems as do all my other items. There is nothing radical in the hardward used in an iPAD that requires a new router or even for an established router to be reset.

  • IPad photo sort order issue is ridiculous. Why is this not fixed?

    Apple,
    Sometimes you might want to come down from the mountain and just fix the most obvious and insanely frustrating issues with your software. The one that rises to the top at the moment is when images are imported to iPad from folders (not iPhoto) they are not sort by name. Whose universe are you in that thinks this is helpful to anyone not using iPhoto and why did the 4.2 update not fix this issue. The iPad is made to present photos in the most amazing way. One of the top three uses for the device. Third party apps for photo presentation/portfolio are a sorry lot of problems and forcing them to import one image at a time is brutal.
    This may also be a good time to rant about changing the orientation switch on the side of the iPad. That was one thing that just worked now it doesn't. You now need to take 5 steps to stop the orientation from changing. Again in what universe is this a good idea?
    Thanks for all the incredible things you make but please take a minute and fix the simple stuff.

    Apple does not really read these forums. If you want to make a suggestion to Apple go here:
    http://www.apple.com/feedback/ipad.html

  • IOS 7.0.3 did not fix the mirroring issue with ATVs and AirServer.  Anyone have an idea what needs to be done?

    iOS 7.0.3 did not fix the mirroring issue with ATVs and AirServer.  Anyone have an idea what needs to be done?  The only solution we have found is to reboot the iPad.  We don't have the option of restarting the wireless as so many people are on and it would further disrupt classes. 

    iOS 7.0.3 did not fix the mirroring issue with ATVs and AirServer.  Anyone have an idea what needs to be done?  The only solution we have found is to reboot the iPad.  We don't have the option of restarting the wireless as so many people are on and it would further disrupt classes. 

  • Why iCal cancel of event edits issue is still not fixed after over 2 years?

    Why iCal "cancel of event edits" issue is still not fixed after over 2 years?
    I have been in the software engineering industry for over 14 years, but I have never seen a large corporation being so slow at addressing major issues like these.
    What would it take for Apple to start working on this issue?

    Yup. This is fully ridiculous that you can't cancel your updates once you start. I love the tool but this is on pretty significant issue.
    Sometimes I accidentally move a mtg or make some edit while viewing and you can't back you!!
    If you feel the same way, you should post a note here:
    http://www.apple.com/feedback/ical.html
    Message was edited by: SteveMc10123

  • Ipad mini working sluggish after installing ios7  why apple is not fixing this issue

    Ipad mini working sluggish after installing ios7  why apple is not fixing this issue
    Now it doesn't feels like i m using an apple device .
    idevices should be flawless thats what it was

    (A) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.
    (B) Reset all settings
    Settings>General>Reset>Reset all settings
    Note: Data will not be affected but settings will be reset.

  • 2.1 Update did not fix SMS tone issue

    I have been having the text tone issue as many others have. That problem being that when a text is recieved the phone will only vibrate. The 2.1 update did not fix the issue...imagine that.

    Hi. You're the first person who has posted about the phone only vibrating when getting text messages. Can you tell me more of the problems you are experiencing when receiving texts? I ask because I exchanged my phone twice already because after a certain number of texts, the audio alert for text messages stops and only vibrates. I thought it was the phone so Apple exchanged it but I'm still experiencing the same problem with this third phone.

  • [svn] 4375: Previous commit did not fix whitespace issue for FxTextArea as advertised.

    Revision: 4375
    Author: [email protected]
    Date: 2008-12-22 09:24:42 -0800 (Mon, 22 Dec 2008)
    Log Message:
    Previous commit did not fix whitespace issue for FxTextArea as advertised. The [CollapseWhiteSpace] metadata has to be on the text getter for FxTextArea. It does not work on the getter for FxTextBase, although it does work for FxTextInput.
    QE Notes:
    Doc Notes: None
    Bugs: SDK-17683
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-17683
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/FxTextArea.as

    Revision: 4375
    Author: [email protected]
    Date: 2008-12-22 09:24:42 -0800 (Mon, 22 Dec 2008)
    Log Message:
    Previous commit did not fix whitespace issue for FxTextArea as advertised. The [CollapseWhiteSpace] metadata has to be on the text getter for FxTextArea. It does not work on the getter for FxTextBase, although it does work for FxTextInput.
    QE Notes:
    Doc Notes: None
    Bugs: SDK-17683
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-17683
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/FxTextArea.as

  • 4.2.1 Does Not Fix" Crash-on-screen saver" bug or metadata issues

    ATV2 crashes as soon as it goes to screen saver. 4.2.1 does not fix this. WTC?
    You have to set screen saver to "Never" to prevent crashing.
    No one checks these things?
    Message was edited by: Mike Kwiatkowski

    Mike Kwiatkowski wrote:
    ATV2 crashes as soon as it goes to screen saver. 4.2.1 does not fix this. WTC?
    Metadata issues still hosed.
    Not seen the screensaver issue.
    Personally I think this update was a patch to fix the DVI flickering issues that rendered the device unusable for many people - other annoyances can be fixed later but we better keep reminding them:
    http://www.apple.com/feedback/appletv.html

  • Small problem really annoying! Reinstall does not fix issue!!

    Hi there Small problem really annoying! Reinstall does not fix issue!!
    The Next button when on Taskbar is showing back!
    Weird but really annoying!!
    Windows 8.1 64 AMD Quad Core Black

    Nothing no help?

  • 2.1.2 update does not fix DVD Navigation issues :(

    The FrontRow 2.1.2 update still doesn't fix the DVD navigation issues where sub menus on MANY DVDs are not navigable. Using the up / down keys on the keyboard or remote causes the Volume to change and not navigating the menus like it is supposed to.
    This is a severe issue as it makes it impossible to play some DVDs or turn on the subtitles.

    Yeah, I have experienced this as well. Ridiculous -- how could this issue not have come up in product testing by the time the software has reached version 2.0? The solution on Apple's end should be obvious. All 4 directional buttons must act only as directional commands when using a DVD, and all other functions (such as volume) can only be accessible by hitting MENU first to bring up a list of other options.
    I'm all for simplicity, but this is the fault of the boneheaded 6-button Apple Remote. It requires their software to overload buttons with different commands depending on context, which is clearly an unacceptable limitation. They'll have to break down and roll out a proper remote with more discrete buttons one of these days and come to terms with the fact that shoehorning everything onto 6 buttons is not an elegant solution.

Maybe you are looking for