ACR won't save files other than in original file folder.

This has just started.  All was fine until now.  I recently was working on several files in camera raw.  Went to save files but discovered that I am unable to save the image, no matter what file format I choose -- TIFF, PSD or JPG -- unless I put it in the original folder it came from.  For example, I would choose Save Image from ACR, then Save in New Location, then Select Folder, choose another file folder (say Desktop) and then it would try to save it but would tell me the file could not be created.  If I choose Save in Same Location, everything works fine.  I AM able to open the RAW file in Photoshop and Save it from there.  As I said this is happening all of a sudden.  I am working with Vista 64 bit and with Photoshop 64 bit.  I tried using the 32 bit program but the same thing happens.  Any suggestions or should I just completely uninstall and reinstall?  I have checked and have all the latest updates for both Photoshop and ACR.  Thanks.

Hi Gingerdee1,
Yes strange ....
-Do you have the right privelige to save at an other location..... >>privelige-user .... or..... >>folder-protection (read-only)... >> or network privelige changed
-Is that disc full maybe at that location....
-Do you try to save a file with illegal characters in the file name...
-Working with other RAW-files.............
-Did you change any other situation....than before...
Regards Fred K

Similar Messages

  • I have used Image Capture to scan images/documents and then saved them as either PDFs or PNG files.  For some reason, just this past week Image Capture will no longer save the file.  It scans, and the Scan Results window pops up, but it won't save file.

    I have used Image Capture to scan images/documents and then saved them as either PDFs or PNG files.  For some reason, just this past week, Image Capture will no longer save the file.  It scans, and the Scan Results window pops up, but it won't save file.
    The file name has no special character in it, just letters and no spaces.
    I have done this in the past and it has worked, but now it will not.
    I have not upgraded any software, that I am aware of.
    After scanning, the Image Capture pops up the Scan Results with the file name in the window, but neither the Scan Results nor the Image Capture window responds to inputs.  The Image Capture window is frozen, with only the "Overview" and "Cancel" buttons active (but non-responsive).
    Is this a software issue or a scanner hardware issue?  I am using a HP Photosmart C6200 series printer/scanner on a network using a Time Capsule airport.
    Thanks.

    I had the same problem.
    Got a 90% fix.  Apparently the Mavericks preferences won't work with Yosemite, so I just deleted the Image Capture preferences.
    Unfortunately, the "Scan to" folder seems to be permanently set to the Pictures folder.
    1.  Quit Image Capture
    2.  Go to Finder > Go > Home, which opens up your home folder (named after your user name)
    3.  Open Library > Preferences > com.apple.ImageCapture.plist - Drag this file to the Trash
    4.  Start "Image Capture", click "Details" and change all your settings as you prefer
    5.  Quit and restart "Image Capture".   Notice it remembers all your settings except "Scan to" folder.  It insists on saving to "Pictures".
    That's as far as I was successful.  I tried changing the "Scan to" folder to "Desktop", but on launch, Image Capture always sets it back to "Pictures".
    This is what I tried:
    6.  Download and install "Pref Setter" from http://www.nightproductions.net/prefsetter.html
    7.  Quit "Image Capture".  Right-click on "com.apple.ImageCapture.plist" and open with Pref Setter.
    8.  Search for "Pictures", which finds "~/Pictures" (the tilde character at the start means your home directory).
    9.  Double-click on "~/Pictures" and change it to the folder you prefer.  I like "~/Desktop"
    10. Choose File > Save then Quit from Pref Setter.  Note that re-opening the plist file still shows "~/Desktop"
    11. Start up "Image Capture" -- on startup, "Image Capture" sets "Scan to" folder to "Pictures"
    I consider this a bug.

  • Numbers 3.0 won't save files!

    Numbers 3.0 suddenly won't save files on my Macbook Pro.
    I opened a .csv file, made some changes in Numbers, and tried to Save to my desktop.  I get a window that says "The file '[filename].numbers' couldn't be opened". 
    I tried to Export to a .xls file, and also Share>Send a Copy>Email and chose Excel as the option.  Same message about not being able to open the file.
    This makes Numbers totally unusable for me.  And for some reason, the old version of Numbers is suddly gone, so no fallback there anymore.
    Any tips?

    And for some reason, the old version of Numbers is suddly gone, so no fallback there anymore.
    Hi Oslo,
    Numbers 3 exports to Excel fine on my machine, though it uses the extension .xlsx not .xls.
    Same with Share>Send a Copy>Email. Works fine.
    So maybe you should try closing Numbers 3 and reopening it, or restarting your Mac.
    Your old version of Numbers should still be on your Mac, in a subfolder within Applications named iWork '09 or similar.
    SG

  • Is there any way to tell "Create MP3 Version" where to create the files other than in the same folder as the songs you want to create the mp3 versions of?

    I am trying to get MP3 versions of my non DRM protected songs onto a DVD so I can import them into my cars "Music Register".
    There is no easy way to do this that I can see in Itunes . I follow this process..
    Highlight the songs I want to copy in Itunes
    Select Create MP3 version from main menu
    Open up Finder Window showing the Itunes folder with the m4a and MP3 files newly created..
    Go Up a directory or 2 to get the Artist 'folder'
    copy that folder to my external drive
    Delete the MP3 songs from the Itunes folder (I dont want duplicates showing) obviously
    Delete the M4a songs from the external drive....
    I have about 5000 songs so doing this manually is clearly a complete pain.
    I dont think you can force it to create the mp3 files anywhere other than in the current folder in itunes unless someone tells me otherwise 
    More likely does anyone know of any other software to do this with less effort...
    I confess to not being an Itunes fan at all I admit but I like the Match functionality so I keep it otherwise I would cheerfully chuck it in the bin...
    Thanks in advance...

    It appears I have figured it out. You gotta go down to where it says Destination and tell Lightroom to Organize into One Folder.

  • I am a student trying to purchase creative card with a maestro card but won't allow anything other than master card or visa, is there any way around this?

    I am a student trying to purchase creative cloud with a maestro card but won't allow anything other than master card or visa, is there any way around this?

    No, not that I know about... but you might check the credit card page to see if there is an option
    Change/Verify Account https://forums.adobe.com/thread/1465499 may help
    -Credit card https://helpx.adobe.com/utilities/credit-card.html

  • Want to upgrade 5G ipod, how do I Save file,folder to DVD-R Thanx&PleasHel?

    Want to upgrade 5G ipod, how do I Save file,folder to DVD-R?

    how do I Save file,folder to DVD-R
    Read the info that came with your computer or DVD burner and backup software.

  • InDesign CC for Mac won't save file

    I've been using InDesign CC and working on a document for over a month. Been saving it in Creative Cloud. Have had no problem opening it, making changes and then saving it. Today I opened, made changes and the file will not save. I've tried saving it down and opening in Indesign 6 and it still won't save. I also cleared InDesign preferences and reinstalled InDesign. Still won't save when I open it up. The strange part is I'm able to open on another computer through Creative Cloud and am able to work on it and save back to Creative Cloud. No matter what I do I can't open and then save on the original computer.

    Finally discovered the problem. It was a PDF of an ad I received from an agency. Once I took it out of the document I was able to save as usual. Thanks for your help!

  • After AW 6.0 update to 6.2.9 won't Save files

    After updating Apple Works 6.0 to 6.2.9, the updated program will not allow me to save any files. After choosing my Macintosh HD as the "save to" location, I am unable to Save. Instead, a small wndow appears stating "Cannot find volume." I had previously been running AW 6.2.9 for a long time, but had to reformat my HD recently and re-loaded AW 6.0, then tried my 6.2.9 update when this problem surfaced. I tried UNINSTALLING these and re-installing several times, but I always have the same problem now. I also have to force quit AW most of the time. However, the OS9 version runs fine and saves fine, no problems with it. Help!!

    Thanks Peggy for your prompt suggestions. I went ahead and used Disk Warrier to rebuild my HD. I also used Disk Utility to repair Permissions. I also trashed preferences from AW for both systems 9 and 10. Same problems! I re-installed AW from the beginning. Same problems! I also find I cannot open any of my AW files directely- a dialog says "file is locked or in use" and "open a copy." When I open a copy, it still won't Save! I went to Get Info- all my AW files have "read only" and the owner is "unknown." I clicked the locked padlock on unknown, unlocked it, reset it to my normal owner name for the computer, changed the file to "read and write" and clicked "open all files with this application" also. It will the open that one file without asking me to open a copy. But still won't Save. And all my other AW files are still set to "unknown" and are still padlocked in the "read only" mode. What the heck do you think happened here? This was after I had the Apple Store help me to reformat a copy of my HD because it had frozen one day and couldn't be retrieved with Disk Utility or Disk Warrier. They couldn't tell me why this had happened. All of my other applications are just fine. Any help would be GREATLY appreciated! Mark Schubert, Phoenix, AZ

  • InDesign CC Won't Save File

    Running InDesign 9.1
    Mac 10.8.5
    I have been using InDesign CC just fine with no issues. I have one file that I have edited for at least a couple of months and have had no issues. All of a suddent today, it won't save. It has all the options to save, but never will actually save. A co-worker can open and save it with no issue, but now I can't. Any thoughts?

    It's a known issue that you can have problems saving an InDesign file if you've dragged and dropped from the Finder or from Adobe Bridge.  It's expected that there will be an update to fix this and other performance issues before too long.
    In the meantime, using File > Place instead of drag-and-drop.

  • Word 2007 won't save files with Acrobat Pro 9.0 Installed

    Last night an issue started occurring while trying to save a document in MS Word 2007 (part of an Office Ultimate install).  After about 10 hours of trying several suggestions from a variety of forums and MS suggestions I found that the only time I cannot save a file by traditional means is when Acrobat is installed.  I tried updating Acrobate and had the same thing happen.  MS says all that's left for me to do is get an answer from Adobe (I have to wonder if it's a copout).
    Steps taken so far:
    Disabled the PDF add-in - still unable to save Word files
    Removed PDF add-in - still unable to save Word files
    Removed entire CS4 suite - Word was able to properly save files
    Installed only the parts of the suite that I use frequently (Photoshop, Soundbooth, Premiere, Acrobat) - unable to save Word files
    Removed Acrobat Pro 9.0 - Word saves files properly again
    When I say it will not save a file I've tried the keyboard shortcuts for Save/Save As, Choosing the Save/Save As from drop down, and even attempted to save by closing the document.  When prompted with the option to save changes I say yes and nothing will happen, I have to close the document with nothing saved.
    I hate the idea of reinstalling Acrobat each time I need to use it to keep Word functional.  I've seen a ton of threads on other forums related to this issue.  Has anybody else seen this or know about a fix/work around?  Any help is appreciated.  Please let me know if additional detail is necessary.
    The operating system for the affected computer is Windows 7 32-bit.

    I installed each update individually (6 of them) and rebooted after each update.  Opened Word and attempted to save a document (after each update/reboot), the documents still cannot be saved (previously created documents still cannot have new detail saved).
    Decided to delete the Office folder in the following path: C:\Program Files\Adobe\Acrobat 9.0\PDFMaker\Office
    Opened up word and Acrobat went through an installation processes, to replace what was removed I assume.  After this was done I attempted to save a document and was still unable to do so.  Went back and deleted that Office folder in the above path again.  When opening Word this time I cancelled the installation process that Adobe was trying to complete.  Preventing the install of the settings and PDF add-in allowed documents to be saved again in word.
    I decided to try to remove the innactive add-in from my Word Options and received the following error message:
    "The connected state of Office Add-Ins registered in HKEY_LOCAL_MACHINE cannot be changed"
    Due to my deleting that folder?
    I suppose I could cancel that installation that initiates each time I open Word (or any other Office program that benefits from Acrobat Add-ins) but that will be a bit of an annoyance.
    Anybody have another suggestion, know what may need to be deleted from the registry to prevent the Add-ins installation when opening Word, or know where that setting can be changed?
    Hopefully getting close to a resolution

  • LT won't save files

    I recently had to re-install FCP 4.5, and now LT 1.2 will not save files. I open a previous file, re-type, click "save as" and nothing happens. I am using OS 10.4.11 on a Mac Pro (intel chip).
    "open" function doesn't work either.
    Thank you.
    Message was edited by: Mark Barroso

    Re-installed LT and it still doesn't work. I downloaded the Pro App 4.0.2 software and installed it but when I check the software profile it says "ProKit 2" and ProKit 4.5 (Leopard)". I'm running Tiger, so should I delete the one for Leopard? Will this matter?
    Can I install LT 2.0 as a standalone application to work with FCP 4.5, QT 7.2 and Tiger?
    Any and all ideas on why I can't save files are appreciated.
    Message was edited by: Mark Barroso

  • Updated Firefox won't save my preferences; reverts to original settings.

    A few days ago, Firefox updated itself to the 18.0.1 version. Now, each time Firefox updates itself, I tend to lose some of my preferences, those being: opening new tabs as a blank page, tabs being on the bottom, and showing my windows and tabs from last time. Usually, though, once I go and change these things back to the way I like them, they stay like that and I have no further problems.
    However, this time Firefox won't save my preferences. The tabs go back to being on top, the tabs I last closed aren't there, and these tool bars I don't want keep appearing. Instead, three tabs are always there upon opening Firefox: Welcome to Firefox, Mozilla Firefox Start Page, and Yahoo! Toolbar. Also, when opening a new tab, the page says, "page does not exist" or something, and the URL is not even comprehensible, just random letters like someone bashed their head into the keyboard, something like: "jkfui87$^&%$$09."
    I've tried resetting Firefox like it says in the "How to fix preferences that won't save" page, but it didn't help. As for deleting certain files from the profile folder, before I resetted Firefox, I only had "user" and "prefs" and "Invalidprefs" which weren't exactly what that self-helping page asked for so I didn't delete them. After I resetted Firefox I lost the "user" file, but I still have the other two. Should I try deleting them even if they're not exactly like the page describes? They are missing the ".js" part so I haven't felt comfortable messing with them.
    Please give me some advice. I'm tired of having to go change my settings in "about:config" each time I open Firefox. But I really don't want to try anything that would delete my bookmarks or history, as I'm very dependent of them.

    Obviously no one here actually READS these things, I tried all of that even did a clean install, even uninstalled all user data and THE PROBLEM IS STILL THERE!
    Your help is completely useless, All you people do is copy and paste the same thing over and over. If it didn't work the first 20 times it's still not going to work no matter how many times you copy and paste the same fucking link.
    You have lost a die hard fan of Firefox, I am switching to another browser.
    Unfortunately I tried older versions of Firefox and had to go all the way back to Firefox 4 and now the problem is fixed.

  • Mail won't save info in Subject field in Drafts folder

    Hi,
    For some reason, Mail won't save what I type into the Subject field for messages in the Drafts folder.
    Why?
    I can save in any other field for any message in the Drafts folder... This has been going on for awhile, both with Mavericks and Yosemite though it worked earlier with Mavericks.
    Cheers,
    John L
    OSX 10.10.1, MacBook Pro, Mail 8.1.
    (Apple hasn't updated the list of OS's yet so it says 10.10 below...)

    Sounds like a limit of your ISP, as it's trying to put it back on the mailserver, which may not accept such a large file.

  • How do I save files I've edited in Photoshop to a location other than the original folder?

    I cannot find a way to change the location of the .psd files created when I edit in Photoshop. Ever since Lightroom 1 they go into the same folder as the orginal, and I would rather have them all placed together in one folder. I have just upgraded to LR 3 and was hoping this might have been dealt with, but cannot find a way. Surely I cannot be the only person to want this... thank you and best wishes, joe holly

    WW, Smart Collection. Very good. I would still need to rescue the files from their folders. I have been using LR from the very beginning, but have moved up to LR3 just this week, and, thus am just becoming acquainted. Can I do that in LR3?
    DJ Paige, I like your idea of finding the files, except that I do not want to remove them from LR; I just want to make some space on my HD.
    FYI, I am quite conscious as to the importance of my original files. I keep a copy on my desktop Mac, along with a backup updated daily. Also, I archive two copies on DVD (or, now, on BluRay) discs and keep each set in a different place. As such I can dump the original NEFs from my laptop and if one is needed, find it on a disc.
    Thank you for your concern, however.
    Frankly, I'm amazed that Adobe hasn't encountered this before. I can't be the only guy who shoots a lot and downloads to my MacBook Pro. My HD is 750 gigs and I fill it from time to time. Earlier this month I visited New Orleans and cruised the Caribbean. In that 10 days I shot 5,000 images -- about 45 gigs. Most will never be seen. I want to trash them so I can go somewhere else and do it again. But I don't want to get rid of them. Among other things, I do slide shows -- have for about 40 years -- and if there is one thing I have learned, it is that if you throw something away, almost immediately you will need it.
    As I'm sure you are aware, a lot of work is needed to take care of all these images in simply renaming and sorting and like that. On the Mac I can separate the NEFs from the PSDs before I trash the RAW files. But this takes time and is more work.
    Once agai, thank you both and best wishes.
    jsh

  • Reader 11.0.10: won't save file open history.

    Adobe Reader 11.0.10 Windows shows a blank recently opened file list after it's closed and relaunched, every time, on the splash screen, the menu list, and on "View All".  100% repeatable.  AR 11.0.09 and before were fine, the problem started with the .10 update. 
    On two different machines, one W7, one W8.1, both x64, running as administrator, both machines with Acrobat Pro 11.0.10 also installed.  Pro 11 is fine, it sees the file history properly.  Both programs set to more than zero in the recently used file list preferences.  Files references are present in the registry hive, but only Pro can see them, apparently. 

    Sadly no. And strange thing is that only this pdf file have problem with saving sigh...even if I told him to send again still can't save this file...my classmate doesn't have this problem  :I for this pdf...but only me specifically on this pdf...it go cray cray (crazy)

Maybe you are looking for

  • Saving the file to a particular location!!!

    Hi,       I have to upload a file and the file uploaded should be saved to aparticular location. For Example if i upload a file named 'eg.jpeg.' , how can i save this file to a particular location in the system? Regards, Shiny

  • Copy and paste problem in Netcape

    I have a text field on a jsp page, sometimes(not all the time) when I copy and paste text into that field in Netscape it will add spaces in front of the text, it looks like it might be right justifying the text in the textbox. This happens only somet

  • Where is the default location for the AppleWorks updater 6.2.9?

    §When I try to install the 6.2.9 updater I get the message 'The default location could not be located'

  • Motion:  Video Cards with Mac Pro?

    I don't see the new video cards for the Mac Pro listed in the "minimum" or "recomended" system requirements. Does anyone know how these new cards will rate?

  • SAP HR Process related to Mobility Apps/ Fiori Apps

    Hello Gurus I would like to know HR Process available related to Mobility Apps/ Fiori Apps. Can someone pls through some light here and also if any links available. RegardsVj