Acrobat 8.2 and Internet Explorer

Hello,
I have a system that is running Acrobat Professional 8.2 and IE8. Under the administrator account everything works fine. If I create a standard user account (Windows 7 64-bit) and the user launches IE a dialog box pop-ups that reads "A serious error has been detected in Adobe Acrobat 8.1.0 Professional...Please reinstall the application..." If you press okay then the browser works and PDFs open, but each time you open a PDF file you get the same prompt and must press okay. I have disabled all the Adobe Browser Add-Ins, created additional accounts, etc. and nothing seems to help with this.
Any advise would be greatly appreciated.
thanks,
mitch

Did you try repairing Acrobat Pro? If you try this and it still does this, try uninstalling Acrobat using the Windows Clean Uninstall Utility, and then reinstall Acrobat? You should also bring your copy of Acrobat up to the latest maintenance level.
Adobe does not support Acrobat Pro 8 to run on Windows 7. I also have my doubts whether it will run on a 64-bit system.
If you also have Acrobat Reader installed on the same system, you should remove Acrobat Reader using the Windows Clean Uninstall Utility and then repair Acrobat Pro.
Good luck.

Similar Messages

Adobe Acrobat 10 BHO and Internet Explorer 11

The PDF Toolbar is not visible in Internet Explorer 11. When I click View-->Toolbars, there is not an option for the PDF. Originally, PDF, PDF Link Helper, and PDF Conversion Toolbar Helper were displaying as incompatible under the Manage Add-ons. I unchecked Enable Enhanced Protected Mode under Internet Options-->Advanced Tab. Once I unchecked that option, they were displaying as enabled. I have repaired Acrobat and reinstalled it. It still does not show as an optional toolbar. Suggestions? Thanks.

[discussion moved to Acrobat Installation & Update Issues forum.]
Best,
Sara

How to automate the Acrobat Reader plugin in Internet Explorer

Hi,
I have been trying to figure out how to automate the Acrobat Reader plugin in Internet Explorer. My goal is to find a way to allow users of our web application to print PDFs to the default printer without having to go through the plugin's GUI. Our application includes a browser helper component, and I had hoped it would be possible to use the IWebBrowser2 interface's get_Document() method to get at some sort of interface to the plugin (as is possible for, say, a Word document hosted in Internet Explorer) and then use this to print the document. However, this does not work: get_Document(), when called on an IWebBrowser2 instance with a PDF loaded, returns E_NOINTERFACE. I also tried calling the IWebBrowser2 interface's ExecWB() method with OLECMDID_PRINT, OLECMDEXECOPT_DONTPROMPTUSER, and PRINT_DONTBOTHERUSER, and printed a blank page rather than the PDF.
Is it possible to do what I am attempting? Like I said, my core goal is to print a PDF from within Internet Explorer without requiring user interaction. I'd appreciate any suggestions as to how I might accomplish this -- it doesn't _have_ to be by automating the plugin (maybe that is a the wrong approach... though it sure would be nice if the plugin provided access to its object model via IWebBrowser2->get_Document()).
Thanks in Advance,
Steve Mckinney
Senior Developer
Paxon Corporation

IF that were entirely true, then the whole purpose of this thread is moot (automating printing server side). It is possible to load the file via URLs using the following html code:
"<"body>
"<"OBJECT id="pdf"
type="application/pdf"
width=800
height=600 >
"<"param name="src" value="http://localhost/pdfs/vorder_nc.pdf"/>
"<"/OBJECT>
"<"script language="JavaScript">
function waitLoad()
setTimeout("printFile()",2000);
function printFile()
var objPdf = document.getElementById('pdf');
objPdf.PrintAllFit(1);
"<"/script>
"<"/body>
So, if I used php or some other scripting language on the server to fill in the name of the pdf, I can load it via a URL, wait a couple of seconds for it to load, and then print it without user interaction. I wish that the LoadFile method would load a URL so that when it returns, I know it is loaded and I don't have to put faith in a timer that may not be enough for a large file.
This is the situation I'm in. This way works but I don't like the timer. I'd rather have the plugin let me know when it's loaded. Is there another method that can help me do what I want?
Thank again.

Remote Panel and Internet Explorer

Hello. I have a problem with a Remote Panel and Internet Explorer. I create a measurement system in LabVIEW. It�s composed of a main front panel and a few subVIs with independent front panels opened from main Front Panel when I press appropriate button. As a local system everything works ok but I try to create a web version of this system. I decide that I can use a Remote Panel. In Web Publishing Tool I was creating a web page for each of Front Panel. I try to have the same functionality as in local system, so when in Front Panel (opened in Internet Explorer window) I press appropriate button I want to open secondary Internet Explorer window with a subVI inside. And now I�m stuck because I can�t open this secondary window in a network w
orkstation. Has anyone have an idea how can I do it?

> Hello. I have a problem with a Remote Panel and Internet Explorer. I
> create a measurement system in LabVIEW. It?s composed of a main front
> panel and a few subVIs with independent front panels opened from main
> Front Panel when I press appropriate button.
I think you have two options. You can open most modal subVI panels
directly on a remote machine. The popup panels won't be in a web page,
but it will work with few changes.
A second approach would be to change the app slightly. The buttons that
launch the subVIs will turn into URL links. The links will open a web
page with a different embedded panel.
Greg McKaskle

Problem with ACE and Internet Explorer 8

I have a problem with ACE (system A2(1.1)) and Internet Explorer 8.
exactly:
ACE is configured as end-to-end ssl with 2 rserver and with the sticky source address. When user is opening the virtual address from IEv7, the web portal (On Microsoft IIS) works fine.
If user opens the same web portal but using IEv8, the session is suspended after 60 seconds.
I think, that the reason is http keep-allive, which is sending every 60 seconds from the user's internet browser.
Here is some information about this. http://en.wikipedia.org/wiki/HTTP_persistent_connection
Do you have any idea how to resolve this problem: upgrade ACE, change the configuration on IIS or ACE ??
Please help.

Hi Kazik,
Using a persistent connection or HTTP keepalives should not have any negative effect on the ACE, so, giving you a straight-forward answer to fix it is not going to be easy.
I would recommend you to open a TAC case to have this investigated further. When you do, please, provide the following data:
A showtech from the Admin context of the ACE
A traffic capture taken on the TenGig interface connecting the switch with the ACE backplane while doing a test connection (preferably one with IE7 and one with IE8 to compare)
If possible, a copy of the SSL private key. Being able to decrypt the traffic capture to look inside the HTTP flow would really make troubleshooting much easier.
Regards
Daniel

Problem with ExternalInterface.call and Internet Explorer

Hi, I´m developing a site, (
www.gen-studio.com/avelart2
), and I´m using a swf to display a set of thumbs that when
clicked show an item and its description on the browser, those
items might be images or video, everything works fine with the
images.
And actually it works fine with the videos too, when using
Firefox, but when I test the page on Internet explorer it just
doesn’t work!
On principle let me describe how it´s supposed to work,
a thumbnail when clicked sends an id number to javaScript using
ExternalInterface.call(“myFunction”,myId); -I´m
using AS3 for the swf´s-
the javaScript file has already loaded (ever since$(
document).ready) a XML file which uses to match the id with a file
and the description, if the item to show it´s a video, then it
creates a variable which holds a string with the proper html to
embed a swf (a swf movie player that resides just next to the HTML
file), when loaded, the swf movie player uses
ExternalInterface.call() to ask for the source of the video that
has to play, and that function is as follows:
setVideo: function(){
alert("hola");
return comun.miVideo;
(The alert(“hola”); is just to test that the
function is being called), which it is, but it returns null as a
value instead of the proper string, and this happens only on
internet Explorer, but works correctly on Firefox.
I´ve been reading all day about the subject and found a
few interesting things, which though have made me narrow my
problem, they haven´t just provided me with a solution, what I
found so far:
-I must have in account flash security issues: Checked (my
actionScript follows:)
import fl.video.*;
import flash.external.ExternalInterface;
flash.system.Security.allowDomain("*");
var vid:FLVPlayback = this.miPlayer;
vid.source =
flash.external.ExternalInterface.call("comun.setVideo");
-ExternalInterface and Internet explorer don´t work
properly when tested locally: Checked (I have a server on my PC and
I´m testing the site as well in the above direction).
-The object tag holding the swf must have a proper id
attribute: Checked.
-It´s super important the way the object tag is formed:
Checked, and I also tested the tag separately (I put it directly in
the HTML instead of adding it via javaScript) and it worked as
expected in both Firefox and Internet Explorer, which leads me to
believe:
-I read somewhere that if you add the object tag by using
innerHTML or appendChild, returning values from javaScript to swf
won´t work, but I couldn´t find an explanation nor a
solution.
Well, as I said now I´ve been looking all day for an
answer, so I really hope you can help me or give me some advice on
the subject, thank you so much for your time!

Hi! it solved itself !! (nahh, I wish), but it indeed had a
solution, it was something quite simple, and I don´t really
understand why it was not working in the first place, but here is
the thing:
I´m learning jquery and this is the first proyect
I´m officially using it, so I was using
$('#myDIV').append("string"); to embed the swf, (and it was working
perfectly on Firefox), so since I had narrowed my problem to those
lines, I decided to try some good-old-fashioned-javaScript and
changed it for: var myDiv =
document.getElementById('thatParticularDiv'); myDiv.innerHTML =
('string'); and it worked both in Firefox and IE !!!!!! :)
I´m quite happy about it, and if someone knows
what´s the issue with my jquery approach I would love to hear
it. THANKS !!

Swf link not working in Firefox, Opera and Internet Explorer but works in Safari

Hi,
I'm sorry but Im a real newbie and really need help!!!
On the homepage of my website I have put a swf file that I linked to another page in my website through the div a href link and it displays great on safari and links, however in other browsers, when i try to click on it, it comes up with the link at the bottom of the browser (where it sometimes says Done), however it doesnt actually link, it jsut stays on the homepage.
Here is the coding i put in:
<div id="products2">
          <p>
          <a href="Our_brands/index.html">
            <script type="text/javascript">
AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0','wid th','449','height','449','title','Products','src','Productions/boxes3','quality','high','p luginspage','http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=Shockwav eFlash','movie','Productions/boxes3' ); //end AC code
          </script>
            <noscript>
            <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0" width="449" height="449" title="Products">
              <param name="movie" value="Our_brands/boxesnew.swf" />
              <param name="quality" value="high" /><param name="SCALE" value="noborder" />
              <param name="allowScriptAccess" value="always"/>
              <embed src="Our_brands/boxesnew.swf" width="449" height="449" quality="high" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash" type="application/x-shockwave-flash" allowScriptAccess="always" scale="noborder"></embed>
              <br />
              <br />
            </object>
            </noscript>
          </a>
          </p>
        </div>
Could someone please tell me where I am going wrong?
I would REALLY appreciate it.
Thank you in advance!!

I'm doing it for a client and they dont want it put up on the server yet, I wish I could put it up bc I have no idea what I'm doing!
Basically I wanted a swf file from Flash to display a range of products (I have turned all the products into buttons) and then I put coding into all the buttons to on release getURL which work in the swf file, however when I put the swf file into dreamweaver, the buttons worked in hover state, but the action scripting didn't work to link the swf file to another page in the website (the index in Our_brands folder).
So i decided to make it link to the index.html in Our_brands folder from wrapping the swf box in a div tag and linking the div tag <a href="Our_brands/index.html"> which links it great in Safari but wont link in Firefox, Opera and Internet Explorer.
Does that make any sense?
Sorry if it doesn't.
Thanks for the quick reply as well!!!

Firefox has suddenly gone wrong. I was successfully running both Firefox and Internet Explorer 8 on Windows 7. I auto-accept upgrades including the most recent Firefox upgrade and the suggested upgrade to Adobe Flash 10.1. But after this, Firefox stopped

Firefox has suddenly gone wrong. I was successfully running both Firefox and Internet Explorer 8 on Windows 7. My laptop is new and has plenty of RAM and HDD. I auto-accept upgrades including the most recent Firefox upgrade and the suggested upgrade to Adobe Flash 10.1. But after this, Firefox stopped working and does not work when I re-load Firefox 3.6. Also IE8 now works very slowly and does not locate major websites like Microsoft without a 'can't find the website message' and having to pressing Return a second time. When I do get to the Mozilla website and click on the button to try to download Firefox 3.6.6, I get this message "Oops! Internet Explorer could not find mozilla3.snt.utwente.nl". Can you help with what has gone wrong? As it stands, I can't use Firefox at all. Note: because Firefox did not work after the upgrade, I've downloaded the IE8 version of the Adobe Flash 10.1. What I really want is to be able to use both Firefox and IE8. But is this possible if they use different versions of Adobe Flash?
== This happened ==
Every time Firefox opened
== About 2-3 days ago ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; Tablet PC 2.0; .NET4.0C)

I have been having the same problem as the original poster. After upgrading to Ffx 3.6.6, the program asks you to upgrade to Flash Player Plugin 10.1. I download and installed 10.1 only to find videos weren't loading.
In my case, the problem is the previous installation of Flash Player (9.0.47) was somehow messing things up. To fix this, because I already had Flash plugin 10.1 installed I had to uninstall 10.1 using the uninstaller from adobe and then manually remove any files related the old flash player plugin 9.0.47
Here is a run-down of my process:
0. To check if you have a previous installation of the Flash Plugin lurking around, in Firefox go to Tools -> Add-ons -> Plugins (tab). At this point you may seen both Flash plugins.
1. Proceed to uninstall Flash Plugin 10.1. Adobe provides an uninstaller here: http://kb2.adobe.com/cps/141/tn_14157.html
( you have to make sure you have nothing running when you execute the installer).
2. On my Mac (sorry I don't know what it is in Windows) I searched the hard drive for any files/folders with "Shockwave". I found a folder called "Shockwave 10". It wasn't removed by Adobe's uninstaller. For safety I deleted it and then emptied the trash.
3. I then went to My HD -> Library -> Internet Plugins.
Remove the file and folder named "Flash player.old"
4. Restarted; ran the Adobe Flash Player 10.1 installer. Restarted again.
5. Opened up ffx and double checked the plugins list (see step 1). Version 10.1 is installed and available. Went to problem sites to test it out and Success!
Hope this helps.

Is HP Smart Web Printing compatible with Windows 7 Ultimate 32 bit and Internet Explorer 8 and 9?

Is HP Smart Web Printing compatible with Windows 7 Ultimate 32 bit and Internet Explorer 8 and 9?

HP Smart Web Printing has been replaced with HP Smart Printing. It does support Windows 7 and IE 6 to IE9. See this page for information.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

EntityEncodeStrings and Internet Explorer w/ CDATA in XML

Hello.
I'm makin a sort of content management system which fetches
data from an XML file:
(pages.xml)
<pages>
<page id="1">
<title>Home</title>
<link>#1</link>
<content><![CDATA[<h3>Welcome"</h3><p>We're
experimenting a lot with different stuff on this page, please bare
with us.</p>]]></content>
</page>
<page id="2">
<title>About</title>
<link>#2</link>
<content><![CDATA[<h3>about</h3>Woah,
hold it there, punk.]]></content>
</page>
[etc...]
</pages>
My XHTML-file has this in the header:
var nav = new Spry.Data.XMLDataSet("/pages.xml",
"pages/page");
nav.setColumnType("@id", "number");
nav.setColumnType("content", "html"); // skips entity
encoding \o/
I want to display everything in the <content />-xml
tree as (X)HTML
With the code I have everything works perfectly in Firefox,
but in Internet Explorer (7) I'm getting no data at all because of
entityEncodeStrings not functioning correctly (or so it seems). If
I remove this it displays in both Firefox and Internet Explorer
(though with the entities encoded).
It doesn't matter which way I do it, using the option
entityEncodeStrings: false or -1 I get the same (non-)results.
I'm very thankful for any help!

http://labs.adobe.com/technologies/spry/samples/data_region/XMLDataSetStringHandlingSample .html

Java and Internet Explorer automation

Hi,
I would like to create a routine in java that would simulate a user browing the web.
Ex: A user vistiting a certain page, clicking on a few links etc...
Is their a java library that can server as a bridge beetween java and internet explorer in order to automate this process.
Thank you.

You want to see it all happening on the screen? If so, you could maybe look into IECanvas or some other Java/COM bridge that would let you embed IE in the Java app. I'm not sure what kind of API is available such that would allow for that.
Another idea is java.awt.Robot which would let you move the mouse and enter text and click on things on any application, but the problem here is that you'd need to know exact coordinates to click on. You could use it to grab screen shots if you can deal with the image manipulation to figure out what is where.

Firefox and internet explorer doesnt work with mac os 10.4.7

i can't seem to get firefox and Internet explorer to work on my g4 da mac with os 10.4.7. any suggestions...

Did they ever work for you?
Did you recently install some new software or make a hardware change to your machine?
The first rule of thumb with misbehaving applications is to erase the Application's preferences and then try it again, but that might be somewhat dangerous considering that you could accidentally erase all of your bookmarks/favorites in the process.
I'm running Mac OS 10.4.7 and I can get FireFox 1.07, 1.5, and 2.0, plus IE 5.2.3 to run, in addition to other browsers like Safari 2, OmniWeb 5.5, Netscape 7.2, and Opera 8.5 and 9.

Firefox and Internet Explorer crashes on startup

Firefox and Internet Explorer both crash at startup. I have tried resetting Firefox but it still crashes. I click on the details box and nothing happens. They will both work fine when I boot up Windows in safe mode.
bp-564f7898-b699-45de-83c6-5c8912130324

Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://hacks.mozilla.org/2010/09/hardware-acceleration/
Try to update the graphic display driver.
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

Dynamic faces and Internet Explorer

Thanks for taking a second to read my post, i hope you can help. I am almost complete with my web app using Netbeans VWP and Dynamic Faces. I have come across a simple application that i can not get working in Internet Explorer and as simple as it is I am surprised that it is not working. I cant believe that the Dynamic Faces team would just ignore compatability with IE altogether. Basically i am trying to get AJAX interaction going on by adding text into a textbox and adding a new DynaFaces.fireAjaxTransaction(this); to the submit however it does not seem to work. Maybe you can help...
Here is my page:
<?xml version="1.0" encoding="UTF-8"?>
<jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page" xmlns:webuijsf="http://www.sun.com/webui/webuijsf">
    <jsp:directive.page contentType="text/html;charset=UTF-8" pageEncoding="UTF-8"/>
    <f:view>
        <webuijsf:page binding="#{testies.page1}" id="page1">
            <webuijsf:html binding="#{testies.html1}" id="html1">
                <webuijsf:head binding="#{testies.head1}" debug="true" id="head1">
                    <webuijsf:link binding="#{testies.link1}" id="link1" url="/resources/stylesheet.css"/>
                </webuijsf:head>
                <webuijsf:body binding="#{testies.body1}" focus="form1:layoutPanel1:textField1" id="body1" style="-rave-layout: grid">
                    <webuijsf:form binding="#{testies.form1}" id="form1">
                        <webuijsf:button actionExpression="#{testies.button1_action}" binding="#{testies.button1}" id="button1"
                            onClick="new DynaFaces.fireAjaxTransaction(this);" style="left: 144px; top: 110px; position: absolute" text="Button"/>
                        <webuijsf:staticText binding="#{testies.staticText1}" id="staticText1" style="position: absolute; left: 170px; top: 185px"/>
                        <webuijsf:textField binding="#{testies.textField1}" id="textField1" style="position: absolute; left: 75px; top: 55px"/>
                    </webuijsf:form>
                </webuijsf:body>
            </webuijsf:html>
        </webuijsf:page>
    </f:view>
</jsp:root>-------------------------------------
Here is my backing bean:
* testies.java
* Created on July 10, 2007, 8:39 PM
package mypkg;
import com.sun.rave.web.ui.appbase.AbstractPageBean;
import com.sun.webui.jsf.component.Body;
import com.sun.webui.jsf.component.Button;
import com.sun.webui.jsf.component.Form;
import com.sun.webui.jsf.component.Head;
import com.sun.webui.jsf.component.Html;
import com.sun.webui.jsf.component.Link;
import com.sun.webui.jsf.component.Page;
import com.sun.webui.jsf.component.PanelGroup;
import com.sun.webui.jsf.component.PanelLayout;
import com.sun.webui.jsf.component.StaticText;
import com.sun.webui.jsf.component.TextField;
import javax.faces.FacesException;
import javax.faces.component.html.HtmlPanelGrid;
* <p>Page bean that corresponds to a similarly named JSP page. This
* class contains component definitions (and initialization code) for
* all components that you have defined on this page, as well as
* lifecycle methods and event handlers where you may add behavior
* to respond to incoming events.</p>
public class testies extends AbstractPageBean {
    // <editor-fold defaultstate="collapsed" desc="Managed Component Definition">
    private int __placeholder;
     * <p>Automatically managed component initialization. <strong>WARNING:</strong>
     * This method is automatically generated, so any user-specified code inserted
     * here is subject to being replaced.</p>
    private void _init() throws Exception {
    private Page page1 = new Page();
    public Page getPage1() {
        return page1;
    public void setPage1(Page p) {
        this.page1 = p;
    private Html html1 = new Html();
    public Html getHtml1() {
        return html1;
    public void setHtml1(Html h) {
        this.html1 = h;
    private Head head1 = new Head();
    public Head getHead1() {
        return head1;
    public void setHead1(Head h) {
        this.head1 = h;
    private Link link1 = new Link();
    public Link getLink1() {
        return link1;
    public void setLink1(Link l) {
        this.link1 = l;
    private Body body1 = new Body();
    public Body getBody1() {
        return body1;
    public void setBody1(Body b) {
        this.body1 = b;
    private Form form1 = new Form();
    public Form getForm1() {
        return form1;
    public void setForm1(Form f) {
        this.form1 = f;
    private TextField textField1 = new TextField();
    public TextField getTextField1() {
        return textField1;
    public void setTextField1(TextField tf) {
        this.textField1 = tf;
    private Button button1 = new Button();
    public Button getButton1() {
        return button1;
    public void setButton1(Button b) {
        this.button1 = b;
    private StaticText staticText1 = new StaticText();
    public StaticText getStaticText1() {
        return staticText1;
    public void setStaticText1(StaticText st) {
        this.staticText1 = st;
    // </editor-fold>
     * <p>Construct a new Page bean instance.</p>
    public testies() {
     * <p>Callback method that is called whenever a page is navigated to,
     * either directly via a URL, or indirectly via page navigation.
     * Customize this method to acquire resources that will be needed
     * for event handlers and lifecycle methods, whether or not this
     * page is performing post back processing.</p>
     * <p>Note that, if the current request is a postback, the property
     * values of the components do <strong>not</strong> represent any
     * values submitted with this request. Instead, they represent the
     * property values that were saved for this view when it was rendered.</p>
    public void init() {
        // Perform initializations inherited from our superclass
        super.init();
        // Perform application initialization that must complete
        // *before* managed components are initialized
        // TODO - add your own initialiation code here
        // <editor-fold defaultstate="collapsed" desc="Managed Component Initialization">
        // Initialize automatically managed components
        // *Note* - this logic should NOT be modified
        try {
            _init();
        } catch (Exception e) {
            log("testies Initialization Failure", e);
            throw e instanceof FacesException ? (FacesException) e: new FacesException(e);
        // </editor-fold>
        // Perform application initialization that must complete
        // *after* managed components are initialized
        // TODO - add your own initialization code here
     * <p>Callback method that is called after the component tree has been
     * restored, but before any event processing takes place. This method
     * will <strong>only</strong> be called on a postback request that
     * is processing a form submit. Customize this method to allocate
     * resources that will be required in your event handlers.</p>
    public void preprocess() {
     * <p>Callback method that is called just before rendering takes place.
     * This method will <strong>only</strong> be called for the page that
     * will actually be rendered (and not, for example, on a page that
     * handled a postback and then navigated to a different page). Customize
     * this method to allocate resources that will be required for rendering
     * this page.</p>
    public void prerender() {
     * <p>Callback method that is called after rendering is completed for
     * this request, if <code>init()</code> was called (regardless of whether
     * or not this was the page that was actually rendered). Customize this
     * method to release resources acquired in the <code>init()</code>,
     * <code>preprocess()</code>, or <code>prerender()</code> methods (or
     * acquired during execution of an event handler).</p>
    public void destroy() {
     * <p>Return a reference to the scoped data bean.</p>
    protected ApplicationBean1 getApplicationBean1() {
        return (ApplicationBean1)getBean("ApplicationBean1");
     * <p>Return a reference to the scoped data bean.</p>
    protected RequestBean1 getRequestBean1() {
        return (RequestBean1)getBean("RequestBean1");
     * <p>Return a reference to the scoped data bean.</p>
    protected SessionBean1 getSessionBean1() {
        return (SessionBean1)getBean("SessionBean1");
    // Get the text from the textbox and set it in the staticTextField
    public String button1_action() {
        String str = (String)textField1.getValue();
        staticText1.setText(str);
        return null;
}Any help is appreciated. thx.
Message was edited by:
b12s

> Hello. I have a problem with a Remote Panel and Internet Explorer. I
> create a measurement system in LabVIEW. It?s composed of a main front
> panel and a few subVIs with independent front panels opened from main
> Front Panel when I press appropriate button.
I think you have two options. You can open most modal subVI panels
directly on a remote machine. The popup panels won't be in a web page,
but it will work with few changes.
A second approach would be to change the app slightly. The buttons that
launch the subVIs will turn into URL links. The links will open a web
page with a different embedded panel.
Greg McKaskle

SWF Object and Internet Explorer

I am experiencing some strange behavior with a SWF Im including in the following web page:
http://www.bostonredevelopmentauthority.org/
The SWF displays properly on the first page visit in both Internet Explorer and Firefox. If I navigate away to a child page, then back with the back button in the browser, the SWF no longer displays in IE. Firefox does not exhibit this behavior.
Any ideas what might be going on here?
Thanks,
Greg

I'm doing it for a client and they dont want it put up on the server yet, I wish I could put it up bc I have no idea what I'm doing!
Basically I wanted a swf file from Flash to display a range of products (I have turned all the products into buttons) and then I put coding into all the buttons to on release getURL which work in the swf file, however when I put the swf file into dreamweaver, the buttons worked in hover state, but the action scripting didn't work to link the swf file to another page in the website (the index in Our_brands folder).
So i decided to make it link to the index.html in Our_brands folder from wrapping the swf box in a div tag and linking the div tag <a href="Our_brands/index.html"> which links it great in Safari but wont link in Firefox, Opera and Internet Explorer.
Does that make any sense?
Sorry if it doesn't.
Thanks for the quick reply as well!!!

Acrobat 8.2 and Internet Explorer

Similar Messages

Maybe you are looking for