Acrobat Reader 5.1 only prints 12 of 33 pages

Hi,
I am using OS 9.1, 576MB RAM, HP LazerJet w/18MB builtin.
I can only print the first 12 pages from a 33 page PDF file.
I do not use desktop printer monitor or anything that shows on the desktop.
I do not use background printing.
I only have 53 fonts active in "System Folder" "Fonts".
Any Help Out There?
TIA
Robert

Hi, Robert. Which LaserJet model are you using, and what printer driver are you selecting in the left panel of the Chooser — LaserWriter 8, AdobePS, or an HP printer driver?
If it's an HP driver, I recommend trashing it. HP has never been able to produce a reliable Mac PostScript printer driver in 15 years of trying, despite Adobe's having done 90% of the work for them. Use LaserWriter 8 or download AdobePS 8.8 instead of using HP's driver. I've used Adobe's drivers (on which Apple's and HP's drivers have always been based) for many years with my old HP LaserJet 4M, always with good results.
Next, locate the PrintMonitor application that is associated with your driver — it's probably in your Extensions folder. Select the PrintMonitor icon and Get Info on it. Click the Memory tab in the Get Info window and quadruple the Preferred figure that is displayed. Close the window and test printing again. Post back with results.

Similar Messages

  • Printing Problem: Acrobat Reader XI is only printing booklet style.

    I have hundreds of pdfs and when I opent them to print, it prints like a booklet. It is not happening with any other documents (from word, excel, google, etc) The print dialog box shows it printing 8.5 X 11 portrait, no scaling. I've checked every setting including the "advanced settings.' Any ideas? 

    I arrived here looking for a solution!  And while reading your post the penny dropped that I didn't have a serious problem.  I have a booklet of 112 pages and all I needed to do was re-order the pages as printed so that 1 is followed by a sheet with 2 on the under-face but same side and so on.  The pages had printed back to front and needed flipping.  But then I have a duplex printer and maybe that makes a difference.  Is it to do with your manual duplexing and the order that the second pass is presented to the printer.  As my duplex sheets effectively needed flipping over each one I'm wondering if you can solve your problem with a little experimentation and re-ordering before your second pass.

  • Adobe Acrobat Reader 10.1.2 Print Issues - Windows Crash Error (2 Sided)

    Have recently had issueswith our upgrades from 10.1.1 to 10.1.2 in regards to the following:
    When printing 2 sided on a Fuji Xerox Firefly C4400 Atheros, application crashes after printing first 4 pages.
    Thus, have tried the patch fix that was recommended on cpsid_92870 however this has not fixed the problem.
    Have also tried the solution with the duplexing but still same issue, Windows crashes.
    Have also tried solution to remove Windows patch KB4332667 and still same issue.
    Screen shots will be provided upon request with the errors.
    Currently running:
    Windows XP SP3
    Adobe Acrobat Reader 10.1.2
    Printer Drivers are the latest and over 500 users on network. 485 are working on 10.1.1 which do not have this issue.
    Is there any solution or 10.1.3 patch release that will address this issue?
    Last Adobe user to work on this was Atul.

    Sonal2890, thanks for your inquiry and I will try to provide as much information as possible.
    1. What happens if inspite of using 'Print on both sides', you check Duplex setting from Properties dialog (As you do previously)?
          The Adobe Reader X Shuts down and is unable to print and displays a message stating it has incurred a problem. Please note, we are running IE7.
    2. What happens if you print with any other application (Word/notepad)
         The documents print fine. IT is only when you print this particular document which is enabled in protected mode and double sided. Have tried the patch and the resolution of unticking the duplex methodology and the issue still persists.
         Crash Logs have already been submitted already. Have added the SEnd Error Report that was provided when the error occurs. The PDF stopped printing after page 6 of a 236 page document and provided the error above.

  • Adobe Reader 9.1 only printing 1st Page of Documents

    When printing documents from Adobe Reader 9.1.0, it will only print the 1st page of the document, even if I have 'All' selected when my print dialouge box pops up.
    Any ideas on a fix?

    Hello:
    You might also wish to supply us with the printer make/model and if it's a local or network printer. Similar issues in the past have been resolved by updating the print driver.
    Thanks!
         Michael

  • How do I print just 1 web page in FF 29 ? With 29 you can only change the first field ( 1 of 5, 2 of 5, 3 of 5, etc. ) That means I can only print all 5 pages,

    So I cant seem to print just the 1st of 5 pages. The default setting , 1 of 5, will print all 5 pages. The 2nd field can not be altered, as it could in previous FF versions, to 1 of 1. Therefore, I can only print all 5 pages, 2 through 5, 3 through 5, etc. WTF - I keep wasting print paper. I got the print edit add-on but that doesn't seem to help. I have been through several FF versions and do not like the format of 29.

    Actually, with the [https://addons.mozilla.org/en-US/firefox/addon/print-edit/ Print Edit addon], if I click the down arrow I get the old print format options and can do it.

  • Used to be able to print multiple page pdf files on my HP 7310 all in one and then it stopped and would only print the curent page. This is tedious for long PDF docs. I am on 10.6.8 .

    Used to be ablert to print multiple page pdf files on my HP 7310 all in one printer and now I can only print the current page and therefore it takes forever printing them one by one. I am in version 10.6.8. Tried printing as image using the advanced click and that did not work either.  I have Adobe 9.0 reader installed.

    I tried this earlier, and I tried it again today.  Both times it said "Software Missing!"  and "HP Software required to connect to your printer over the network could not be found on this computer."  But when I tried to install the software (AIO_CDB_Net_Full_Win_WW_130_141.exe, which I downloaded from HP's web site), it wouldn't install, as described above.  In the diagnostic utility, I clicked "skip", and it said "Connection Verified!", and "The printer is connected to the network and the services related to the network connections have been verified and reset to a normal operating state.  Everything appears to work fine at this point.  Please doa test print to verify that the issue is resolved or click Skip to move to the next step."  I clickedthe "Test Print" button, and immediately it popped up a box that said "Test Print Failed."
    I tried again to install the HP software, and it installed, detected the printer, and asked me to select it.  I selected the printer, clicked "next", and it did its network diagnostics.  Then it said "Problem(s) found with your network" and "Problem(s) may exist with the network functions of your printer . . ."  I continued the installation without connecting to the printer.  Then I ran your network printer diagnostic tool again, and got the same result - "HP Software required to connect to youir printer over the network could not be found on this computer."

  • I can only print the current page of downloaded pdf's.  Not able to print "all".  I'm using a Macbook air.

    I can only print the current page of downloaded pdf's.  Not able to print "all".  I'm using a Macbook air.

    it says "the document could not be printed".  "There were no ages selected to print".
    I selected "all".  I always tried selecting pages "1-3".
    The only choice that works is current page.  Very strange.

  • My Deskjet990cse printer only prints the sample page but I cant get my resume to print.

    My Deskjet990cse printer only prints the sample page but I cant get my resume to print.

    Please read this post then provide some details.  What operating system? Are there any error messages on the computer screen or blinking lights on the printer?  What program are you using to print?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Photosmart C6380 only prints the last page in documents

    My printer only prints the last page of multi page documents. To choose more than one page in a page interval in the print menu does not help, but it is possible to print all pages in a document if I only print one page at a time which takes forever for longer documents. I use Windows 7 64 bits and it used to work until the end of 2011. If I uninstall drivers and reinstall, it sometimes work for a short while and then the problem comes back. All my drivers are updated and I run the printer on wifi.

    Just to add some information: I do not get any error messages, blinking lamps or anything like that. I've got the same problem independent of file-format as it seems. I have tried word-files, pdf-files and to print from the web browser Explorer.

  • I'm trying to print out a credit card statement from my iPad, it only prints the first page not 4pages, please help

    I'm trying to print out a credit card statement from my iPad, it only prints the first page not the 4 pages, please help

    I read your first post when I was posing a separate question on the Mac Pro board.  I now see that we may be talking about printing from an iPad with Airprint instead!!!!!  I very much suspect the print command and settings are different for Airprint but I have never used it to be able to offer concrete advice.  I think the setting choices could be different even with Airprint on the laptop and further that you may not even be using Safari but some special app???
    I've not heard or seen the term "frame" in the context of printing before except perhaps in the context of a screen shot.  Is the credit card statement a "pop-up" of some kind rather than a webpage or pdf?

  • When I print a web page it only prints the first page and not the rest of the web page below the page break.

    When I print a web page firefox will only print the first page, all of the content to the first page break and nothing past that.
    How can I change the settings so that it will print more than on page?

    -> Tap ALT key or press F10 to show the Menu Bar
    -> go to Help Menu -> select "Restart with Add-ons Disabled"
    Firefox will close then it will open up with just basic Firefox. Now do this:
    -> Update ALL your Firefox Plug-ins https://www.mozilla.com/en-US/plugincheck/
    -> go to View Menu -> Zoom -> click "Reset" -> Page Style -> select "Basic Page Style"
    -> go to View Menu -> Toolbars -> unselect All Unwanted toolbars
    -> go Tools Menu -> Clear Recent History -> '''Time range to clear: select EVERYTHING''' -> click Details (small arrow) button -> place Checkmarks on '''Cookies, Cache, Site Preferences''' -> click "Clear Now"
    -> go to Tools Menu -> Options -> Content -> place Checkmarks on:
    1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
    -> go to Tools Menu -> Options -> Security -> place Checkmarks on:
    1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
    -> Click OK on Options window
    -> click the Favicon (small drop down menu icon) on Firefox SearchBar (its position is on the Right side of the Address Bar) -> click "Manage Search Engines" -> select all Unwanted Search Engines and click Remove -> click OK
    -> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious Extensions (Add-ons) -> Restart Firefox
    You can enable your Known & Trustworthy Add-ons later. Check and tell if its working.

  • C4680 printer will only print 1/2 page

    i have installed drivers again but still only prints 1/2 page. i first installed on dell desktop was fine went to hp desktop won't function??

    Hi there jjgtb,
    This article covers partial page prints. Select your operating system and give the steps outlined a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • My psc2115 only prints a blank page except from toolbox in diag mode

    hi any one with an suggestions please, i have a psc 2115 all in one it goes through the motions for printing but only prints a blank page except from the laptop on a network share,  iv tried new drivers, tried microsoft fixit, tried the hp diag software, still not working, its just printing a plain page, in print preview it shows the page that its gonna print then prints a plain page. tried all the hp support and the MS technet and it still dosent work , on the network share it only works from the wifes laptop (win 7) it prints ok. on my workstation (xp pro) it prints from the toolbox diag screen it will print a diag test page. ive un-installed and reinstalled the driver iv rest factory settings, im out of ideas fro the moment, any ideas please

    Hello Burnhug 54,
    Thanks for the post.  With this one, I've included a document below that should assist with this one.  It was some very good basic t-shooting tips.  If after going through these steps, you are still getting blank pages, then be sure to check your driver from control panel and from one of your applications.  Ensure that it is indeed the PSC2115.  Good Luck!
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&cc=us&dlc=en&lc=en&product=91430&tmp_t...
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=buu05210&tmp_task=solveCategory&cc=us&dlc=en&lan...
    I worked for HP but my posts and replies are my own....Thank you!
    *Say thanks by clicking the *Kudos!* which is on the left*
    *Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

  • Canon printer only printing a partial page.

    I updated to 10.10.1 and my Canon MG5522 will only print part of the page and then it faults for lost of communication. I've tried deleting the Canon folders in the Library and emptying the trash. Restart the computer and installed the new printer driver from Canon for my printer. Added the printer but it would still only print a partial page. Any ideas on what to try to fix the problem. Thanks!!

    Just to be sure it is not an OS or driver fault, connect the MG to the Mac via USB. This will either create a new printer automatically or you will have to open Printers & Scanners and add the printer. Then see if you can print a full page.
    If that works, disconnect the USB cable to the MG and reconnect to the wireless access point. Then open Safari and enter the IP address of the MG as the URL. This will connect to the internal web page of the MG and here you will see the strength and quality of the wireless signal. If either is below half then try restarting your wireless router so that it picks up another channel, working on the assumption that the current channel being used is crowded.
    Also, if your wireless router provides 2.5Ghz and 5GHz channels, try disabling the 5GHz channel and restarting the Mac and MG to see if that improves the wireless stability.

  • I chose double sided printing and it only printed half the pages. it didn t ask me to flip them

    I chose doubke sided printing on my F2280 and it only printed half the pages for me. . . . .  .I didn task me to flip them round and continue and it is quite a big document to print it over again
    can you help please? : )
    Thanks

    Sometimes the wireless MagicMouse can be erratic and seem to automatically zoom in, etc.  Try going to System Preferences and detuning the sensitivity settings, see if that helps.

Maybe you are looking for

  • Help needed in utl_file

    Hi, I have two groups in data model of my report. I am using utl_file in a formula column of report last group.it's working fine. but my problem is if customer has more than one invoice lines then all that lines not comes under only particular custom

  • Problem with Barcode printing in smartforms

    Hi Gurus, I have  made  changes to the system barcode  height in SE73 from say 1.3 to 0.7 cm. But when I take the printout  from the  barcode printer I am getting  the  barcode with old height. My concern is do we  need to do change anything with the

  • I bought an iPhone from someone out of the paper and they didn't log out of their iCloud account.

    I Bought an iphone from someone out of the paper and they didn't log out of their icloud account. im not too sure how to fix this problem considering I cannot get in contact with them. so if someone could help me I would really appreciate it.

  • System Copy - Copy parameters afterwards

    Hi After doing a system copy from our Production system to our QA system, I now have the PROD parameters in QA. How do I copy and rename these to QA.  Do I need to copy the files at the OS level and rename them.  Then import them into SAP from RZ10.

  • Help deleting saved web pages

    Hello:         I am new to dreamweaver cs5 and I am working from a book Adobe Dreamweaver Classroom in a Book.          Being new to Dreamweaver and  just having fun I have created and saved 4 basic web pages that are appearing in the dreamweaver Wel