ACS 3.2 for Windows and Windows Active Directory.

I'm using a member W2K server to run ACS 3.2.
I'm using ACS and Windows group mapping but my users always go into default group.
Why?
Thanks.
Andrea.

I'm assuming your ACS \DEFAULT domain has NT Groups mapped to . Use a new Domain Configuration to add your AD and group mappings.
The group name in ACS must match exactly the same group in AD. ie. If your AD group name is "Engineering" , create a ACS group with exactly the same spelling. Also,avoid certain characters such as @#%&*() in the naming of groups, both in AD and ACS.
Hope this helps. let us know.
P

Similar Messages

  • LMS 2.6 and ACS 4.2 compatible with Windows 2008 R2 Active Directory?

    Hi,
    We are planning to upgrade CORP Domain from Windows 2003 Active Directory Schema to Windows 2008 R2 Active Directory Schema.
    I wanted to know if the following applications which are installed on windows (domain member servers) are compatible with windows 2008 server R2 schema?
    CiscoWorks LAN Management Solution 2.6
    Cisco Secure Access Control System 4.2
    Cisco Fabric Manager 1.5
    Any help is much appreciated!

    - CiscoWorks LAN Management Solution 2.6 - Not supported and this software is EOS-EOL.
    www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/prod_end-of-life_notice0900aecd80532c07.html
    - Cisco Secure Access Control System 4.2 - Not supported either:
    http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/installation/guide/windows/install.html#wp1041324
    - Cisco Fabric Manager 1.5 - Was not able to find anything for version 1.5 and not really familiar with this product.  However, according to the below not even version 4.2(7d) supports 2008:
    www.cisco.com/en/US/docs/switches/datacenter/mds9000/sw/fm/release/notes/20325_10.html#wp657668

  • Require list of all events for Windows Server 2008 Active Directory

    Hi all,
    I require list of all events for Windows Server 2008 Active Directory. Event Log name for Active Directory log is "Directory Service".
    Regards,
    SR

    Hi,
    Thanks for your posting.
    Do you mean you want to list all Active Directory logs into one file named “Directory Services”?
    If that, it’s hard to achieve. There are kinds of Active Directory logs stored in different locations and they have different file formats. It’s hard
    to collect them into one file.
    Active directory records events in the directory services log in Event Viewer. By default, Active Directory records only critical error events. To instruct Active
    Directory to record other events in the directory services log, we need to modify registry.
    For more information please refer to following MS articles:
    Active Directory Diagnostic Logging
    http://technet.microsoft.com/en-us/library/cc961809.aspx
    How to configure Active Directory diagnostic event log
    http://support.microsoft.com/kb/314980
    Lawrence
    TechNet Community Support

  • How do I convert my Windows 7 Folder to an ISO image to burn to a USB, in order to use Bootcamp Assistant to partition my MacBook Pro for Mac and Windows?

    How do I convert my Windows 7 Folder to an ISO image to burn to my  USB Flash drive (16GB)  in order to use Bootcamp Assistant to partition my MacBook Pro for Mac and Windows?

    Sorry - confusing - My question has NOT been solved yet - can anyone help?

  • I am interested in purchasing Adobe's Creative Suite 6 Master Collection for Mac and Windows (Single User Educational License) FOR STUDENTS & EDUCATORS ONLY.

         I am interested in purchasing Adobe's Creative Suite 6 Master Collection for Mac and Windows (Single User Educational License) FOR STUDENTS & EDUCATORS ONLY. I am purchasing this program for my son who attends George Washington High School: The College Academy in New York, New York. He is a sophomore and is interested in web design. I would like to know if he is eligible to use/activate the Creative Suite 6 Master Collection for Mac and Windows (Single User Educational License) FOR STUDENTS & EDUCATORS ONLY prior to my purchase.

    Peru Bob makes a good point.  I just assumed the OP understood what the System requirements | Adobe Creative Suite 6 were.
    Nancy O.

  • Why is the connectionUri different in WSManConnectionInfo object for exchange and windows?

    For exchange the connection uri used is : 
    'http://machineName/powershell'
    The WSManConnectionInfo object is created in the following way:
     WSManConnectionInfo connectionInfo = new WSManConnectionInfo(new Uri("http://machineName/powershell"), "http://schemas.microsoft.com/powershell/Microsoft.Exchange", ExchangeCredential)
    To connect to windows, the uri used is 
    'http://machineName::5985/wsman '
    The WSManConnectionInfo object is created in the following way:
     WSManConnectionInfo connectionInfo = new WSManConnectionInfo(new Uri("http://machineName:5985/wsman"), "http://schemas.microsoft.com/powershell/Microsoft.PowerShell", credential);
    Why is there a difference in the connection uri for exchange and windows?

    Hi Cmm user,
    You can refer to WSManConnectionInfo Constructor (Uri, String, PSCredential) to understand.
    uri: The URI that defines the connection endpoint where the remote runspace is opened.
    shellUri: The URI of the shell that is launched when the connection is made.
    credential: A
    PSCredential object that contains the user account that has permission to make the connection.
    For connection to Exchange server, please refer to this article to understand:
    How to: Get a list of mail users by using the Exchange Management Shell in Exchange 2013:
    http://msdn.microsoft.com/en-us/library/office/ff326159(v=exchg.150).aspx
    For connection to Windows server, the uri is as the ConnectionURI, which Specifies the connection endpoint. The format of this string is:
    <Transport>://<Server>:<Port>/<ApplicationName>
    I hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Need FireFox installations from version 3 till present for MAC and Windows

    Good day!
    I am working for a Software Testing Company, and I need installations for FireFox from Version 3 to present. for Mac and Windows. Is there any way I can get these installations, Cant seem to find them on website.
    It will be very much appreciated if you can help.
    Thank you
    Reinhart Buit
    [email protected]

    ftp://ftp.mozilla.org/pub/firefox/releases/

  • Missing *.inf driver for 2605dtn and windows 7 64 bit

    missing *.inf driver for 2605dtn and windows 7 64 bit
    I just piurchased a new HP laptop with windows 7 64 bit installed.  I do not have any windows 7 disks.
    Where do I obtain the necessary drivers for this printer?

    HI RandyJohnson,
    You do not need to download drivers for this product. Print drivers for your product are available within the Windows 7 operating system. Use Devices and Printers, formerly known as the Add Printer Wizard, to obtain the Windows 7 update. For more information,  go to Install the Printer Driver through the Windows 7 Operating System (c02536257) (in English).
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • Adobe Lightroom 4 for Mac and Windows, can I install the same license on both systems or only 1?

    I just purchased 1 full license of Adobe Lightroom 4 and I can see there's an installer for Mac and Windows.
    does it mean I can install on both systems or my license is only valid for 1?
    Thank you
    BR,
    Lucia

    Yes, LR is cross-platform and you can install it on both systems.
    Mylenium

  • How do I extract 1 page of a pdf file? How do I send that as a original for mac and windows users?

    How do I extract 1 page of a pdf file? How do I send that as a original for mac and windows users?

    This is not really a Numbers question.  I will provide an answer but suggest you make the question relavent for the forum where you post.
    1) Open the PDF in Preview
    2) select the menu item "View > Thumbnails"
    3) select the page you wnt to share
    4) copy (by using the key combination <command> + c OR select the menu item "Edit > Copy"
    5) select the menu item "File >  New From Clipboard"
    6) save as a new name
    7) share the new file

  • Satellite L500-1EN - Where to find drivers for XP and Windows 7?

    To me are necessary the driver for L500-1en. On a site has not found. If it is fashionable to use the driver from other model write from what.
    To me are necessary the driver on Windows XP, Windows 7.

    Hello
    I have a little bit searched on the Toshiba website and it seems that your model belongs to the PSLJTE series and therefore you can download all drivers for XP and Windows 7 here:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
    Notebook > Satellite > Satellite L Series > Satellite L500 > PSLJTE
    Check this!!!

  • Why we have separate azure java SDK for linux and windows

    I saw different links for downloading azure java SDK for linux and windows.
    What difference does it actually have when java is platform independent? Or both are same jars?

    Hi,
    Thank you for your post.
    It contains the same jar files.
    Regards,
    Mekh.

  • CD different for Linux and Windows

    I have in hand a very strange CD. This is an (old) CD with drivers for a Samsung printer. The CD has drivers for Linux and Windows. But if I mount the CD in Linux, I see only the Linux driver and if I access the CD from Windows, only the Windows drivers are seen. How they can do that ? How can I mount in Linux the CD in order to see the content seen from Windows ?

    In Windows ( DIR D: )
    Le volume dans le lecteur D s'appelle SAMSUNG_LBP
    Le numéro de série du volume est C432-A954
    Répertoire de D:\
    28/02/2005 00:53 <REP> ACROBAT_READER
    26/10/2004 06:11 740 AUTORUN.INF
    28/02/2005 00:53 <REP> DATA
    28/02/2005 00:53 <REP> ML-1610
    28/02/2005 00:53 <REP> Manual
    09/12/2004 03:55 11 219 SETUP.DAT
    20/09/2004 07:29 270 336 SSAuto.Dll
    17/09/2004 08:03 253 952 SSEtc.dll
    22/09/2004 11:09 225 280 SSFcs.dll
    12/03/2004 05:59 1 622 016 SSRes.dll
    17/09/2004 08:04 155 648 SSTtp.dll
    26/10/2004 05:42 307 200 Setup.exe
    28/02/2005 00:54 <REP> USB
    8 fichier(s) 2 846 391 octets
    5 Rép(s) 0 octets libres
    In linux (ls -l -F /mnt/cdrom)
    total 44
    dr-xr-xr-x 22 root root 4096 Feb 28 2005 Manual/
    -r--r--r-- 1 root root 2555 Feb 28 2005 README.txt
    -r-xr-xr-x 1 root root 51 Feb 28 2005 autorun*
    dr-xr-xr-x 3 root root 2048 Feb 28 2005 bin/
    dr-xr-xr-x 8 root root 2048 Feb 28 2005 cups/
    dr-xr-xr-x 4 root root 2048 Feb 28 2005 data/
    dr-xr-xr-x 3 root root 2048 Feb 28 2005 help/
    -r--r--r-- 1 root root 8517 Feb 28 2005 icon.xpm
    dr-xr-xr-x 9 root root 2048 Feb 28 2005 locale/
    dr-xr-xr-x 2 root root 6144 Feb 28 2005 misc/
    dr-xr-xr-x 3 root root 2048 Feb 28 2005 ppd/
    dr-xr-xr-x 2 root root 2048 Feb 28 2005 scripts/
    dr-xr-xr-x 4 root root 2048 Feb 28 2005 setup.data/
    -r-xr-xr-x 1 root root 6603 Feb 28 2005 setup.sh*
    ouput of isoinfo -d dev=dev/sr0 (in linux)
    CD-ROM is in ISO 9660 format
    System id: LINUX
    Volume id: SAMSUNG_LBP
    Volume set id:
    Publisher id:
    Data preparer id:
    Application id: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR (C) 1993 E.YOUNGDALE (C) 1997 J.PEARSON/J.SCHILLING
    Copyright File id:
    Abstract File id:
    Bibliographic File id:
    Volume set size is: 1
    Volume set sequence number is: 1
    Logical block size is: 2048
    Volume size is: 239152
    Joliet with UCS level 3 found.
    SUSP signatures version 1 found
    Rock Ridge signatures version 1 found
    Rock Ridge id 'RRIP_1991A'
    If I use on Windows the Windows port of cdrtools; then these tools behave as in Linux, showing me the Linux contents. In Linux I can also mount -t udf and then I see:
    total 32
    -rw-r--r-- 1 root root 32768 Feb 28 2005 Desktop DB
    -rw-r--r-- 1 root root 0 Feb 28 2005 Desktop DF
    drwxr-xr-x 1 root root 22 Feb 28 2005 Manual/
    This was for a Samsung ML-1610 B/W laser printer. This is crazy.
    @lolilolicon That explain the result when I mount -t hfs. But the difference in Linux and Windows remain mysterious. How Windows "mount" the CD? I believed it was the equivalent of mount -t iso9660 in Linux but apparently, it is not.
    Last edited by olive (2011-09-08 12:12:16)

  • Download issue when Windows 7 Pro joins a Windows Server 2008 Active Directory

    Hi,
    I purchased 2 new Dell OptiPlex 3010 desktop computers that came with Windows 7 Professional operating system with SP1. 
    There were no Microsoft updates installed yet.  After I added one of these Dell computers to the Windows Server 2008 Active Directory, I was not able to download several items. 
    Below are several examples:
    1) I downloaded the Norton anti-virus installation file.  This file is not the full installation of Norton; it is more of a file where you execute it and it will download the full installation from the Internet like from their Norton web
    site.  So when I executed this installation file, it does not download the full installation files. 
    It just hung at the screen saying “Downloading” and it will finally stop with an error (don’t remember the error message).
    Note: If I have the full Norton installation file then I am able to install it on this computer with no problems.
    2) I downloaded the Adobe Reader installation file.  This file is not the full installation of Adobe Reader; it is more of a file where you execute it and it will download the full installation from the Internet like from their Adobe web
    site.  So when I executed this installation file, it hung at the downloading part and then it will error out with a “Actionlist Not Found” message.
    Note: If I have the full Adobe Reader installation file then I am able to install it on this computer with no problems.
    3) I installed Microsoft Office 2010 Standard version on this computer. 
    I configured Microsoft Outlook to retrieve emails from my email provider (pop and smtp settings). 
    After configuring Microsoft Outlook, I was able to send emails through Microsoft Outlook successfully (and very quickly), but he was unable to retrieve my emails. The progress bar for the Receiving in the "Outlook Send/Receive Progress" box
    shows no progress. The Progress bar is not moving. There is a message at the bottom of Microsoft Outlook stating "Receiving message 1 of 6 (x.xx KB of x.xx MB)" and it is very slow. My new emails were not being retrieved at all. 
    I tried various pop and smtp servers that was available for my email provider, but all had the same effect.
    4) I can access certain web sites (e.g.
    www.yahoo.com, www.cnn.com) while I cannot access other web sites like
    www.usatoday.com, my web hosting email site.
    Note: I had a Dell computer with Windows XP Professional operating system and this computer does not have any of the above issues.
    The above are only a few examples that I have experienced. 
    If I removed this Dell OptiPlex 3010 computer from the Windows Server 2008 Active Directory then I still experience the same issue.
    So as another test, I setup the other new Dell OptiPlex 3010 with the same Windows 7 Professional OS with SP1. 
    This time, I did not join the Windows Server 2008 Active Directory and I was able to successfully download the full Norton installation files, download the full Adobe Reader installation files, download my emails from Microsoft Outlook 2010, etc. 
    But once I joined this computer to the Windows Server 2008 Active Directory then I am not able to download these files and emails at all.
    It seems like there might be some group policy or a security setting that is preventing these downloads so I disabled the group policy on the Windows Server 2008 AD and Windows 7 Profession OS, but it didn’t resolve the issue.
     I disabled all of the firewall programs on this Windows 7 Professional OS, but it still did not resolve the issue.
    Since the Windows Server 2008 AD did not have DHCP installed, I installed DHCP and setup a scope. 
    Then configured the Windows 7 Professional OS to obtain an IP address, but it didn’t resolve the issue.
    If I move this Windows 7 Professional computer to another network where it did not have any Active Directory; it just had a wireless router serving DHCP then everything works on the Windows 7 Pro computer.
    Any ideas what is the root cause when a Windows 7 Professional computer join a Windows Server 2008 AD?
    Thanks,
    wl_tech

    Hi,
    Could you please tell some information for the AD environment and how it connect to the internet?
    Regarding 3rd party installlers didn't work as expected, please also seek help in their offical website.
    For outlook not receiving emails, could you please take a look in
    Event Viewer and see if there are any special errors logged there?
    And when trying to access the website like
    www.usatoday.com, any special errors IE showed out?
    Best regards
    Michael Shao
    TechNet Community Support

  • Upgrade from Windows Server 2012 Active Directory to Windows Server 2012 R2 Active Directory

    We are currently running Windows Server 2012 Active Directory and would like to upgrade to Windows Server 2012 R2 AD. Is it OK to just do an in-place upgrade, or is it advisable to build new domain controllers on R2? Are there any guides or articles anyone
    can recommend?

    Hi Ginandtonic,
    To upgrade DC(Domain Controller) from windows server 2012 to windows server 2012 r2, please refer to these articles:
    Upgrade from windows Server 2012 to 2012 R2                                 
    Upgrade Active Directory from 2012 to 2012 R2
    I hope this helps.
    Best Regards,
    Anna

  • Windows server 2008 Active Directory with PT8.49

    Hi All,
    i m using the follwoing:
    PeopleTools 8.49
    HRMS & Campus Solution 9.0
    i wnat to know is Micrososft Window 2008 Server Active Directory supported with peopletools 8.49
    Regards,
    Irfan

    My favorites are RODCs and AD as a service.  
    Microsoft explains it in detail here:
    http://technet.microsoft.com/en-us/library/cc755093(v=WS.10).aspx

Maybe you are looking for