ACS 4.2 services not working

The server is running with Windows 2003 SP2 and due to some issue it got rebooted. After reboot all services stopped working.
CSAdmin, CSMon and CSRadius hanged in Starting state and CSLog in Stopping state. When i chaged the startuptype to manual and started these services
i got " Could not start the CSAdmin service on Local computer. Error 1053 The service did not respond to the start or control request in a timely fashion "
For CSLog service it gives the error message "The CSLog service on Local Computer started and then stopped. Some service stop automatically if they have
no work to do, for example, the Performance Logs and Alerts service."
In the eventviewer it shows "The description for Event ID ( 1 ) in Source ( CiscoAAA ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: CSAdmin, Can not initialize SchemeLayer, 74."
While automatic startup type event viewer shows below error.
"The description for Event ID ( 1 ) in Source ( acs ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: *** ERROR *** Assertion failed: 103401 (9.0.0.1271)
Unable to open file (C:\Program Files\CiscoSecure ACS v4.2\CSDB\acs.db) which previously opened successfully; error = 32.The description for Event ID ( 1 ) in Source ( acs ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: *** ERROR *** Assertion failed: 103401 (9.0.0.1271)
Unable to open file (C:\Program Files\CiscoSecure ACS v4.2\CSDB\acs.db) which previously opened successfully; error = 32."
Please help me to fix this.
Thanks

Since we had no access to ACS windows server. We tried to take backup  from csutil but it gave schemalayer error message.As we have AV  stopped, logs files deleted from the directory, killed the stuck  services from the task manager and restarted the server. If it still not  allowing you to restart the services, most likely you need to take  backup, uninstall the ACS server and reinstall the same version of ACS  followed by restore.
~BR
Jatin Katyal
**Do rate helpful posts**

Similar Messages

  • Lion Server DNS service not working for locally created zones. Caching working fine.

    OS Lion Server DNS service not working for local zones. Was fine under Snow leopard server but Lion server upgrade has severely broken my DNS and web sites. Zones look fine under Server Admin but keep getting "query failed (SERVFAIL) for xxxx at /SourceCache/bind9/bind9-42/bind9/bin/named/query.c:3921" in the logs. BTW - Server Admin cant seem to see the log file either.
    Surely someone actually tested that DNS still worked on Lion?

    I upgraded from Snow Leopard Server to Lion Server on day 01.  I hit the same issue where, after the upgrade, my Lion Server stopped serving names for my private local domain.
    I finally took a few minutes to figure out what was wrong.  After turning on debug logging and looking through the logs, I found my particular issue, now resolved.
    The issue I had was, when the domain initially was setup when I installed Snow Leopard Server, for some reason it created a zone just for the server (in my case, something like zone "s-01.mydomain.priv"), and a separate zone for all the other machines (zone "mydomain.priv", containing all the private IPs for my local domain).  I never messed with it because it worked, but generally I would have put all of them in the same zone.
    My zone "mydomain.priv" had a nameserver and mail exchanger entry for my server, s-01.mydomain.priv.  I could see this in the Server Admin app on the DNS bubble, Zones tab, mydomain.priv selected, and the General Info panel.  This was fine in Snow Leopard.  This was failing the zone load in the updated bind for Lion Server, though.  The issue was that the "mydomain.priv" zone was referencing the s-01.mydomain.priv server, which was not defined in the "mydomain.priv" zone but rather in the "s-01.mydomain.priv" zone.
    My fix:
    1. In Server Admin, add the server to the zone "mydomain.priv".  I put an A record (Add Machine) in the "mydomain.priv" zone for my server named s-01.mydomain.priv.
    2. shut down DNS on the OS X Lion Server (hit the Stop DNS button on Server Admin).
    3. edit /etc/named.conf by hand, removing the specialized zones that contianed just the server.  In this case, it would be the section titled 'zone "s-01.mydomain.priv"' and the section titled 'zone "3.10.1.10.in-addr.arpa"'.  Your in-addr.arpa zone name will change based on whatever your server IP address was.  My internal one happened to have s-01.mydomain.priv mapped to 10.1.10.3.
    4. Once the specialized zones for just the server were removed, I started the DNS up again.  Instead of serving four zones as it had in OS X Snow Leopard Server, it now servers two zones.  And, now, it is resolving my local machines for the mydomain.priv zone.
    YMMV.  I did note that it wasn't totally necessary to do step 3, but I never really understood the need for the specialized domain, and keeping it around would have a copy of data that would just confuse things.
    Hope that helps.  That's been the only hiccup I've noticed updating to OS X Lion Server thus far.

  • "no serializer is registered..." error with a web service not working

    I'm using JDeveloper 10.1.3
    EJB 3.0
    I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
    ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
    I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
    I can get the version that I saved to work immediately after the version that does not fails.
    Any help would be greatly appreciated,
    Dan

    I'm using JDeveloper 10.1.3
    EJB 3.0
    I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
    ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
    I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
    I can get the version that I saved to work immediately after the version that does not fails.
    Any help would be greatly appreciated,
    Dan

  • [svn] 4226: Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.

    Revision: 4226<br />Author:   [email protected]<br />Date:     2008-12-03 15:25:17 -0800 (Wed, 03 Dec 2008)<br /><br />Log Message:<br />-----------<br />Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working. <br />QA: Yes<br />Doc: No<br />Checkintests Pass: Yes<br /><br />Details:<br />* Make sure the <reliable/> option is treated as a nested element rather than an attribute of its parent <network> element.<br /><br />Ticket Links:<br />------------<br />    http://bugs.adobe.com/jira/browse/LCDS-517<br /><br />Modified Paths:<br />--------------<br />    blazeds/trunk/modules/core/src/flex/messaging/Destination.java

    Revision: 4226<br />Author:   [email protected]<br />Date:     2008-12-03 15:25:17 -0800 (Wed, 03 Dec 2008)<br /><br />Log Message:<br />-----------<br />Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working. <br />QA: Yes<br />Doc: No<br />Checkintests Pass: Yes<br /><br />Details:<br />* Make sure the <reliable/> option is treated as a nested element rather than an attribute of its parent <network> element.<br /><br />Ticket Links:<br />------------<br />    http://bugs.adobe.com/jira/browse/LCDS-517<br /><br />Modified Paths:<br />--------------<br />    blazeds/trunk/modules/core/src/flex/messaging/Destination.java

  • [svn] 4195: Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.

    Revision: 4195
    Author: [email protected]
    Date: 2008-11-26 13:08:23 -0800 (Wed, 26 Nov 2008)
    Log Message:
    Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.
    QA: Yes
    Doc: No
    Checkintests Pass: Yes
    Ticket Links:
    http://bugs.adobe.com/jira/browse/LCDS-517
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/config/ServerConfig.as

    Revision: 4195
    Author: [email protected]
    Date: 2008-11-26 13:08:23 -0800 (Wed, 26 Nov 2008)
    Log Message:
    Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.
    QA: Yes
    Doc: No
    Checkintests Pass: Yes
    Ticket Links:
    http://bugs.adobe.com/jira/browse/LCDS-517
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/config/ServerConfig.as

  • [svn] 4193: Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.

    Revision: 4193
    Author: [email protected]
    Date: 2008-11-26 11:40:05 -0800 (Wed, 26 Nov 2008)
    Log Message:
    Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.
    QA: Yes
    Doc: No
    Checkintests Pass: Yes
    Details:
    * Foundational update to include destination config in what we collect for runtime config exchange with new clients for destinations with network/reliable=true (LCDS only).
    * Also typo in comment in AbstractConnectionAwareSession fixed.
    Ticket Links:
    http://bugs.adobe.com/jira/browse/LCDS-517
    Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/AbstractConnectionAwareSession.java
    blazeds/trunk/modules/core/src/flex/messaging/Destination.java
    blazeds/trunk/modules/core/src/flex/messaging/services/AbstractService.java

    Revision: 4193
    Author: [email protected]
    Date: 2008-11-26 11:40:05 -0800 (Wed, 26 Nov 2008)
    Log Message:
    Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.
    QA: Yes
    Doc: No
    Checkintests Pass: Yes
    Details:
    * Foundational update to include destination config in what we collect for runtime config exchange with new clients for destinations with network/reliable=true (LCDS only).
    * Also typo in comment in AbstractConnectionAwareSession fixed.
    Ticket Links:
    http://bugs.adobe.com/jira/browse/LCDS-517
    Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/AbstractConnectionAwareSession.java
    blazeds/trunk/modules/core/src/flex/messaging/Destination.java
    blazeds/trunk/modules/core/src/flex/messaging/services/AbstractService.java

  • I experience issue with my Verizon iPhone5s cellular service not working on 3G.

    I'm experiencing issue with my Verizon iPhone5s cellular service not working on 3G but LTE works great. I tried resetting network setting, new SIM card, reset iPhone to new too. I'm have the latest carrier code of 16.0. Iphone firmware 7.1.2.
    I started experiencing this when verizon started advertising XLTE.
    It is very frustrating when internet does not work when I'm in 3G area. Phone calls does work though. Signal is good too.
    Thank you in advance.

    I would agree w you but this only happens on Iphone5S.
    Iphone5 works fine.  I tested this with other Iphone 5 and 5s.
    To test this, go to setting/celluar/turn off "Enable LTE"

  • Web service not working when called remotely

    Hi there!
    I built a simple web service to generate a sequence number to be cosumed by PDF forms.
    It works perfecly when I run PDFs on my machine, using localhost, etc.
    Whem deployed on the client's servers it does not work. The only difference is the client is running LiveCycle on Linux over their inhouse corporate network.
    When the web service is added to forms in LC Designer, the ws structure is built correctly and if called from a web browser the XML response is ok too.
    I've checked LiveCycle log file - there's nothing there, the ws is not even being called.
    Where should I look for error messages or other resources to aid me in identifying the problem?
    Thank you very much for any hints!
    Marcos

    Hi there!
    I built a simple web service to generate a sequence number to be cosumed by PDF forms.
    It works perfecly when I run PDFs on my machine, using localhost, etc.
    Whem deployed on the client's servers it does not work. The only difference is the client is running LiveCycle on Linux over their inhouse corporate network.
    When the web service is added to forms in LC Designer, the ws structure is built correctly and if called from a web browser the XML response is ok too.
    I've checked LiveCycle log file - there's nothing there, the ws is not even being called.
    Where should I look for error messages or other resources to aid me in identifying the problem?
    Thank you very much for any hints!
    Marcos

  • HTTPS sites and services not working on Snow Leopard 10.6.6

    Hi guys, any assistance would be appreciated as I really don't want to reinstall everything again.
    *Problem description:* After reinstalling Snow Leopard after some issues, I am unable to get any https services working (such as the online back up system Carbonite), nor access any https websites. My Macbook Pro and Windows Laptop on the same network have absolutely no issues with it. +Please also note that this problem is not limited to Safari, any software or browser that uses HTTPS to connect will not work.+
    *Attempted fixes:* Repaired Permission errors, deleted keychain and security preferences, and manually configured the network connection. I have also checked to make sure the date/time are correct and created a new user which has also not helped.
    *Recent changes:* My iMac refused to start up after permission errors so I was forced to reinstall Snow Leopard. I did a fresh install after formatting the drive.
    *Operating system:* Snow Leopard 10.6.6
    *System specs:* 2009 24" iMac

    If I was there with you,
    As a "Best Practice"
    #1- I would recommend that we make a FULL Bootable Backup of where you are, and confirm that it is bootable.
    Then
    As another Best Practice you should always have on the ready any and all INSTALLERS of your programs, along with the corresponding serial numbers,
    I feel that being PROACTIVE is a much place to be, then REACTIVE.
    #2 - I would be inclined to do a overlaying install of Snow Leopard, What happens is it will install a new OS while preserving ALL other info/data, including your Applications, Users.
    Please keep me posted as to your results,
    Randy Mac
    RMACS, LLC

  • Task created to stop and start Health service not working.

    We have multiple servers being grayed out so we created a task to stop and start the health service on SCOM 2007 R2. We have created two tasks one to stop and another task to start. The STOP task works but the START tasks keeps running but there is no result
    as well as when i check in Services.msc it is still stopped. Below are the screen shots .
    Task created to STOP the health service which is running.
    Screen shot of service start task creation which is NOT working
    The same was created for another service windows audio. Which worked for both stop and stop (Created separate tasks).
    We also tried the recycle health service and chche which is also failing.
    Can any one please help. The issue is on both SCOM 2007R2 and 2012 R2 both. Is there any other way to touch the health service.
    We are facing the issue only with Healthservice.

    Hi All,
    Thank you for all your answers.
    @ dktoa -
    You are right we have to concentrate on the servers to determine why do they go grey (all in one site). But before we do that i felt i find a temporary solution. Then go deep investigation to solve the issue.
    @Yan LI: As per the likn provided above you. I overrided the servers but still the health services were not starting or restarting. When i created a custom group and added the servers to that  group in that site and then  enabled the override on Restart
    Health Service for a specific group and pointed towards that group then it worked.
    Thanks All.

  • SHAREPOINT 2013 WITH SQL SERVER 2012 REPORTING SERVICES - NOT WORKING

    The SQL 2012 with SP1 is installed but the Reporting Services are not working and not able to connect the Sharepoint with it.
    i also TRIED TO install THE ADD-ON (rsSharePoint.msi) but it doesn't connect and show the Sharepoint Mode and cannot connect the Reporting services.
    If I install the Reporting Native feature then the reporting service config displays the Instance else doesn't show and connect to the sql server.
    But I am able to access the Configuration manager and TCP/IP are enabled.
    I have installed SQL 2012 and Sharepoint 2013. Please revert soon.
    Tks - Vinay

    Reporting Service
    http://msdn.microsoft.com/en-us/library/jj219068.aspx
    http://blogs.msdn.com/b/biblog/archive/2012/12/04/installing-and-configuring-sql-reporting-services-on-sharepoint-2013.aspx
    http://blogs.msdn.com/b/psssql/archive/2011/02/18/sharepoint-adventures-setting-up-reporting-services-with-sharepoint-integration.aspx
    http://dinesql.blogspot.in/2010/06/configuring-reporting-services-2008-r2_07.html
    http://www.codeproject.com/Articles/355461/Dynamically-Pointing-to-Shared-Data-Sources-on-SQL
    http://www.heysharepoint.com/problems-with-sql-2012-reporting-services/
    http://andrewcbancroft.com/2012/06/30/troubleshooting-sql-server-2012-reporting-services-and-sharepoint-2010-integration-part-1/
    Please find the helping URL
    Thanks
    Jaison A
    http://infomoss.blogspot.in

  • Why does location services not work on my ipad2 with ios7?

    Why does my wifi only iPad 2 location serves not work...worked for years, even when I traveled extensively and returned home. I loaded ios7plus and went out West for the holidays.  Worked out West and on return, did not...live in country and worked when I took it to Mickey d's six miles away.  Only change is ios7 and it's default to Apple maps.  Apple support claimed to have passed this to engineering, but despite my follow ups with them using my case number, they have left me in limbo with a silent phone.  This is very wrong and not the apple I have known...very frustrated.

    Cause Wi-Fi only iPads do not have GPS receivers in them, nor can they use the cell towers for triangulating position. Best they can do is guesstimate based on the hotspots they are connecting to. They base their guess on a database of known hotspots, which can be incomplete, erroneous or wildly inaccurate. The  rise of the problem can be due to any change you or your ISP has done to the Wi-Fi setup you use.
    If you need to depend on critical apps that require reliable Location Services, get Wi-Fi+Cell devices next time. They can be used without a SIM chip with no problems (and not paying for cell charges), but GPS will work fine.

  • Why are my location services not working?

    I received a new iPod touch yesterday, and it is now running iOS 5.  I can't get the location services to work from my home.  On my old 2nd generation touch, they work perfectly.  I've check all of my settings regarding the location services and everything is 'on'. 

    Jim, Barry,
    This for the replies. For what it is worth, I am confident all settings are OK, at least all the obvious ones.  I just cannot see what is missing.  In terms of what is not working, all Apps having a location option / button (Maps, Google Earth, etc) do not provide location.  For example, Maps will reply by showing a "Cannot determine location" message.  The same applies to the two iPads in the house and to whatever iPads enters on my Wi-Fi.
    Ideas?

  • 7520 All in one web services not working

    I got notified of a new update for the 7520. When I tried to install it, the screen said it was successful but then said "updating....do not turn power off" and it freezes and the update never gets successfully installed and I have no web services. I tried reiinstalling the whole software package, restarted the printer multiple times and the router too and can't seem to find an answer.  Anyone know what to do next?

    bjg1,
    Welcome to the HP Forum.
    Assuming you can get to the point where you can get the software installed, you might be able to get Web Services back using the following workaround.
    Suggested Workaround:
    On the printer, Disable the web services -- that is, remove web services from the printer.
    This may then allow you to then "Enable Web Services".
    There is a consequence to this action:  Your previously selected ePrint custom address will no longer be valid and cannot be reused.  When you go back and log into your HP Connected account you may need to not only "add device" to re-add the printer to the device list of ePrint printers, you will have to select a new custom email address for that printer.
    Where / how is this done?
    Side Bar: The Disable Web services is usually done on the printer, although if the service is actually working, one can switch off EWS from EWS.  
    Disable EWS on the printer, wait a few seconds, and then Enable the service again.
    Switching off EWS does not "break" your HP Connected account, although it does put a crimp in your printer's ePrint setup.  You can still log into the HP Connected account where the printer and the ePrint account is managed.    After EWS is disabled / enabled, you must log into your HP Connected account.
    If you do not find your printer listed under the Devices tab, you can usually "add device" and add your printer right back into the list at this point.
    If you do find your printer, but it won't cooperate, it won't update, you cannot "do" anything with it, go ahead and remove it. 
    If you have to "remove the printer", then Log out of  HP Connected. 
    If you have to "remove the printer", then Walk around your house / office / back yard -- come back.
    Log into HP Connected and use "Add device" to add your printer.
    Update the ePrint email address to something new - add a number, think of something new and clever; it does not matter as long as the name is different.
    Click the Kudos Thumbs-Up!
    It is a nice way to say “Thank You" for the help.
    Although I strive to reflect HP's best practices, I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • RMI service not working only inside desktop application creatd in netbeans

    Actually I have made an RMI service which works just fine inside a normal java application which I have created in netbeans 6.1, now the problem aries when I put this code inside a desktop application creatd in netbeans 6.1, see the code below, when I use this code in desktop application creatd in netbeans 6.1 the application hangs at the line as shown below;
    String[] list = registry.list();
    well I do not no why it just hangs there and after three or for minutes it returns with some error, I have shown the error in the end. What it seems to me that inside desktop application creatd in netbeans 6.1 the application can not get registry.list() or registry list.
    try
    registry = LocateRegistry.getRegistry(serverAddress, 1099);
    String[] list = registry.list();
    if( list == null )
                        throw new RemoteException( "list == null" );
    else
    for (int k=0; k < list.length; k++)
    System.out.println("registry" + k + ": " + list[k].toString());
    System.getProperties().setProperty("java.security.policy", "wideopen.policy");
    // Create and install a security manager
    if(System.getSecurityManager() == null)
    System.setSecurityManager(new RMISecurityManager());
    rmiServer = (ReceiveNodeInterface)(registry.lookup("RMIServiceToSendNodesHierarchy"));
    String text = "Please, send us the root node.";
    rootNode = rmiServer.getRootNode(text);
    treeModel = new DefaultTreeModel( rootNode );
    jTreeOPCservers.setModel(treeModel);
    catch(RemoteException e){
    e.printStackTrace();
    catch(NotBoundException e){
    e.printStackTrace();
    the error is ;
    java.rmi.ConnectIOException: Exception creating connection to: 192.168.1.142; nested exception is:
    java.net.SocketException: Connection reset
    at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:614)
    at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198)
    at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
    at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:322)
    at sun.rmi.registry.RegistryImpl_Stub.list(Unknown Source)
    at tagbrowser.TagBrowser.getRootNodeIntoTree(TagBrowser.java:198)
    at tagbrowser.TagBrowser.<init>(TagBrowser.java:83)
    at desktopapplication1.DesktopApplication1View.MyAction(DesktopApplication1View.java:217)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    No I am sure that I am not starting the RMI Registry with socket factories at the server. Next I am sure that the RMI Registry is running. Infect as I have said in the start that I have made an RMI service which works just fine inside a normal java application which I have created in netbeans 6.0.1 the problem aries when I put this code inside a desktop application creatd in netbeans 6.0.1 or 6.5 both.

Maybe you are looking for