ACS IS WORKING, BUT NOT THE WEB GUI

I have an ACS ver 5.4.0.46.7 running on an applicance, ACS-1121-K9. After rebooting a Win2008-controller it stopped working and someone in my Department rebooted the ACS. It looks like the authentications are working now, but I can't Access the web gui. It responds to ping and ssh. I did a show acs-config-web-Interface and the view-Interface was disabled, I enabled it but still it isn't working:
TBGACS02/admin# show acs-config-web-interface
migration interface is disabled
ucp interface is disabled
view interface is enabled
rest interface is disabled
TBGACS02/admin# show application status acs
ACS role: PRIMARY
Process 'database'                  running
Process 'management'                running (HTTP is nonresponsive)
Process 'runtime'                   not monitored
Process 'adclient'                  running
Process 'ntpd'                      running
Process 'view-database'             running
Process 'view-jobmanager'           Execution failed
Process 'view-alertmanager'         running
Process 'view-collector'            running
Process 'view-logprocessor'         running
I could try to reboot again but I'd prefer not if possible..

As a basic troubleshooting we can restart the services or server completely. However if that doesn't help, then we can also review the size of /opt to ensure accumulation of view database is not causing this issue. From the logging perspective we can look at management and ade/ADE logs. 
In Majority of cases customer reset the application configuration and restore the last good backup. This always help them resolve the issue quickly without going through the troubleshooting process. 
HTH
-Jatin

Similar Messages

  • Allt he links in the header of any websites are not working, I reinstalled fiorefix and it s the same. No problem in others browser. the tool bar is working but not the link sinside the web page located between the top 300px height

    all the links in the header of any websites are not working, the cursor is not changing into pointer and no way to click on any link located at the top of any website page. I reinstalled firefox and it s the same. No problem in others browser. the tool bar is working but not the links inside any web page located between the top 300px height.
    So I can t tlog into any website, i cant write an email as the compose button is located in the top of the page.. Please help, i have all my bookmarks into my firefox...

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • HT4993 My volume down button is not working.  The UP button works, but not the down button.  I have tried to restart it and that didn't solve the problem.

    My volume down button doesn't work on my iPhone.  The UP buttown works, but not the down button.  I have tried a hard reset and that didn't fix it.

    Try this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Approve/Post Journal works in 32-bit, but not the web Client?

    We have HFM 4.01 sp2 and sometimes when a user tries to approve/post a journal in the HFM Web Client they receive a security error (even though they have the post role and ALL access to the Entity), then they login to the 32-bit client and they can approve/post the same journal? Why?
    Thanks,
    Tom

    The user in question has all the security he needs. . . post journal role, ALL access to the scenario, entity, etc. or it wouldn't work in the 32-bit (windows) client either. I want to know why he received an error in the Web Client, but NOT the windows client?

  • When I plug in my ipod touch the sound works but not the video

    I got this app for my kids and I want to play it on my tv the sound works not the video.   But when I put the same app on my iphone 4s it works fine on my tv using same cord etc  I don't know if there is something I need to do to my ipod to make it work.

    The 4G iPod TV (video) out only works with apps that support TV out. The Video app is one such app. The iPhone 4S (and later iPhones, the 5G iPod and iPad 2 and later) on the other hand can mirror the iPod's screen for TV out.

  • One charger works but not the other

    Just had something weird happen to my Macbook (13' 2.4GHz Model). I tried plugging in my adapter (L shaped one) and it was not charging. LED light was not lit up on the charger and connection felt loose. So i thought this meant I have a damaged port.
    Just to be sure, I took out the T shaped adapter that I had kept from the previous macbook and lo and behold it is charging my macbook. The connect is loos-ish but not as bad as before. So that made me think the L shaped adapter was damaged. But then when i tested that it out on my old macbook which began charging as if nothing was wrong. The connection was a lot stronger.
    Now my question is, should I get my magsafe port on my newer machine checked out or should I continue to use the T shaped adapter? And if I should replace the port would I be able to replace the existing port with the port in the older machine (machine has damaged logic board so it's really just for parts)

    Actually, there are other threads about another issue that sounds similar. If you remove your battery and replace it, the charger will begin working. If for some reason this does not work, you can reset your SMC.
    Until this is fixed, my new method for plugging in my 2008 Macbook Pro is to plug it in before opening the cover, and if it doesn't work, then remove and replace the battery before opening. That way, if it is sleeping (LED pulsating) when the battery is replaced it will restore sleep from the saved image. If you were to remove the battery too soon after closing the lid, it would be in the process of saving the sleep data, and a full restart would be needed.
    Message was edited by: CGDaveMac

  • Sound problem - ear-phone works but not the internal speakers on my Probook 6440b

    Ear-phone works fin, Skype works fine but all other sounds (spotify, media player, itunes ) do not work when unplugging earphones.

    Did you solve this problem? Because I have the same one. My speakers doesnt work, but all other part (headphones, microphone) works fine. Its realy bit problem for me. Please can you help me? I have last version of sound driver installed.

  • My audio works but not the video

    My audio will work but when I want to watch any video on any different app the video doesn't work.why?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • Pings work but not the content

    Hi All,
    I have a server 10.56.3.40 trying to access a page 10.56.10.11 which is the VIP address for the content delivered by 10.56.3.50, 60 and 70.
    I can ping 10.56.10.11 from 10.56.3.40 but when I access the webpage www.net.com (DNS resolves this to the VIP address 10.56.10.11), I cannot access it.
    I have the load balancer sitting in between a firewall and the server vlan203 (10.56.3.x).
    The VIP address for the contents are 10.56.10.x. The CSS has 2 interfaces (one to fw with ip 10.56.10.3 and one to server vlan 203 with ip 10.56.3.3.). I have the following config
    !************************* INTERFACE ********
    interface 1/1
    bridge vlan 999
    description "Failover link to secondary"
    interface 2/1
    bridge vlan 210
    description "Link to VIP vlan (firewall)"
    interface 2/2
    bridge vlan 203
    description "Link to dmz servers"
    !************************** CIRCUIT *********
    circuit VLAN999
    ip address 10.56.99.3 255.255.255.0
    redundancy-protocol
    circuit VLAN210
    redundancy
    ip address 10.56.10.3 255.255.255.0
    circuit VLAN203
    redundancy
    ip address 10.56.3.3 255.255.255.0
    !************************** SERVICE **************
    service 10.56.3.50-443
    ip address 10.56.3.50
    port 443
    keepalive frequency 10
    keepalive type ssl
    keepalive port 443
    active
    service 10.56.3.50-80
    ip address 10.56.3.50
    port 80
    keepalive frequency 10
    keepalive type http
    keepalive port 80
    keepalive uri "/lbcheck.asp"
    active
    service 10.56.3.60-443
    ip address 10.56.3.60
    port 443
    keepalive frequency 10
    keepalive type ssl
    keepalive port 443
    active
    service 10.56.3.60-80
    ip address 10.56.3.60
    port 80
    keepalive frequency 10
    keepalive type http
    keepalive port 80
    keepalive uri "/lbcheck.asp"
    active
    service 10.56.3.70-443
    ip address 10.56.3.70
    port 443
    keepalive frequency 10
    keepalive type ssl
    keepalive port 443
    active
    service 10.56.3.70-80
    ip address 10.56.3.70
    port 80
    keepalive frequency 10
    keepalive type http
    keepalive port 80
    keepalive uri "/lbcheck.asp"
    active
    !*************************** OWNER ****************
    content www.net.com
    add service 10.56.3.50-80
    vip address 10.56.10.11
    add service 10.56.3.60-80
    add service 10.56.3.70-80
    protocol tcp
    port 80
    active
    !**************************** ACL ***********
    acl 1
    clause 1 bypass any 10.0.0.0 255.0.0.0 destination 10.56.3.0 255.255.255.0
    clause 2 bypass any 192.168.0.0 255.255.0.0 destination 10.56.3.0 255.255.255.0
    clause 100 permit any any destination any
    apply circuit-(VLAN210)
    acl 2
    clause 10 permit tcp 10.16.3.0 255.255.255.0 destination 10.16.10.0 255.255.255.0 eq 80
    clause 20 permit tcp 10.56.3.0 255.255.255.0 destination 10.56.10.0 255.255.255.0 eq 443
    clause 30 bypass any 10.56.3.0 255.255.255.0 destination any
    clause 25 permit tcp 10.56.3.0 255.255.255.0 destination 10.56.10.0 255.255.255.0 eq 25
    apply circuit-(VLAN203)
    acl 3
    clause 1 permit any any destination any
    I do not see any asymetric routing. But not sure why port 80 traffic is not accessible from vlan203.

    classic nat issue.
    When x.x.3.40 goes to the vip, the destination address is changed to one of the servers ie: x.x.3.50.
    Now, the response from x.x.3.50 must be sent to....x.x.3.40
    They are on the same subnet, so x.x.3.50 responds directly to x.x.3.40, bypassing the CSS.
    You need to do client naton the css to nat request from the servers.
    service servicex40
    ip address 10.56.3.40
    active
    group servernat
    vip address 10.56.10.11
    add service servicex40
    active
    If more addresses need to be nated, you may want to use acl to do this.
    This has been discussed many times, so you should be able to find sample configs and documentation.
    Regards,
    Gilles.

  • My Stocks widget is not working.  The graph part works, but not the stock value section.

    My Stock widget is not working.  No prices are displayed.  Fix?

    If it is the Apple provided widget, Yahoo! Finance, there have been a rash of problems lately - see the More Like This box at the top right.
    1. If you have any mutual funds loaded, try removing them.
    2. Try opening a 2nd copy of the widget. That has worked for me a couple of times.
    3. If you have a backup, try restoring the widget. It is normally in the hard drive/Library. It might be in your user folder/Libary also. See below on how to access your user library.
    4. Try removing the com.apple.dashboard.plist in your user folder.
    You need to look in your user Library/Preferences for the .plist. Either hold down the option key while using the Finder “Go To Folder” command and select your user Library in your home folder or use the Finder “Go To Folder” command and enter ~/Library/Preferences/com.apple.dashboard.plist.  Move the .plist to your desktop.
    Log out/in and test. If it works okay, delete the plist(s) from the desktop.
    If the same, return the .plist(s) to where you got them from, overwriting the newer ones.
    If you prefer to make your user library permanently visible, use the Terminal command found below.
    Show User Library
    You might want to bookmark the command. I had to use it again after I installed 10.8.4. I have also been informed that if you drag the user library to Finder it will remain visible.

  • I recently upgrated to latest Firefox 7.0.1. I am getting Corrupted Content Error trying to load pages on certain web sites. Try again works but not the initial attempt. Is there a fix for this.

    This frequently happens with I select an article in an email from New York and it tries to load that article from http://www.nytimes.com/. It also happens when I select the URL below. I tried Internet Explorer with the URL below and did not experience the problem.

    '''https://support.mozilla.org/questions/997866?esab=a&s=&r=1&as=s'''.<BR>
    This is not a cure but will make it easier if Firefox locks up.

  • I have audio working, but not the microphone on my toshiba satellite

    Hi there, I'm a newbie to the arch way, but I'm not a newbie to linux, however I'm pretty stumped with this one (I'm not used to having to look after everything, but I'm loving it!) I have a Toshiba Satellite C650D-10W, and it has a very annoying soundcard built into it. I have the sound working, thankfully, however I cannot get the inbuilt mic to function. Some info here:
    lspci:
    00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate
    00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx)
    00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
    00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1)
    00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode]
    00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
    00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
    00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
    00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
    00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 41)
    00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
    00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller (rev 40)
    00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40)
    00:16.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
    00:16.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
    00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
    00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
    00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
    00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
    00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
    01:05.0 VGA compatible controller: ATI Technologies Inc M880G [Mobility Radeon HD 4200]
    02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
    08:00.0 Ethernet controller: Atheros Communications AR8152 v1.1 Fast Ethernet (rev c1)
    Dmesg:
    Initializing cgroup subsys cpuset
    Initializing cgroup subsys cpu
    Linux version 2.6.35-ARCH ([email protected]) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Sat Oct 30 19:57:05 UTC 2010
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000002e54a000 (usable)
    BIOS-e820: 000000002e54a000 - 000000002e74a000 (ACPI NVS)
    BIOS-e820: 000000002e74a000 - 000000002fd3f000 (usable)
    BIOS-e820: 000000002fd3f000 - 000000002fdbf000 (reserved)
    BIOS-e820: 000000002fdbf000 - 000000002febf000 (ACPI NVS)
    BIOS-e820: 000000002febf000 - 000000002fef7000 (ACPI data)
    BIOS-e820: 000000002fef7000 - 000000002ff00000 (usable)
    BIOS-e820: 00000000f8000000 - 00000000f9000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    DMI 2.6 present.
    e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
    e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    last_pfn = 0x2ff00 max_arch_pfn = 0x100000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-FFFFF write-through
    MTRR variable ranges enabled:
    0 base 000000000000 mask FFFFE0000000 write-back
    1 base 000020000000 mask FFFFF0000000 write-back
    2 base 00002FEBE000 mask FFFFFFFFF000 uncachable
    3 base 0000FFE00000 mask FFFFFFE00000 write-protect
    4 disabled
    5 disabled
    6 disabled
    7 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
    Scanning 1 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000001000 (reserved)
    modified: 0000000000001000 - 0000000000002000 (usable)
    modified: 0000000000002000 - 0000000000010000 (reserved)
    modified: 0000000000010000 - 000000000009fc00 (usable)
    modified: 000000000009fc00 - 00000000000a0000 (reserved)
    modified: 00000000000e0000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 000000002e54a000 (usable)
    modified: 000000002e54a000 - 000000002e74a000 (ACPI NVS)
    modified: 000000002e74a000 - 000000002fd3f000 (usable)
    modified: 000000002fd3f000 - 000000002fdbf000 (reserved)
    modified: 000000002fdbf000 - 000000002febf000 (ACPI NVS)
    modified: 000000002febf000 - 000000002fef7000 (ACPI data)
    modified: 000000002fef7000 - 000000002ff00000 (usable)
    modified: 00000000f8000000 - 00000000f9000000 (reserved)
    modified: 00000000fec00000 - 00000000fec01000 (reserved)
    modified: 00000000fec10000 - 00000000fec11000 (reserved)
    modified: 00000000fee00000 - 00000000fee01000 (reserved)
    modified: 00000000ffe00000 - 0000000100000000 (reserved)
    initial memory mapped : 0 - 01800000
    init_memory_mapping: 0000000000000000-000000002ff00000
    0000000000 - 0000400000 page 4k
    0000400000 - 002fc00000 page 2M
    002fc00000 - 002ff00000 page 4k
    kernel direct mapping tables up to 2ff00000 @ 15000-1a000
    RAMDISK: 2e3b5000 - 2e53a000
    ACPI: RSDP 000fe020 00024 (v02 TOSINV)
    ACPI: XSDT 2fef6120 0005C (v01 TOSINV TOSINV00 00000003 01000013)
    ACPI: FACP 2fef5000 000F4 (v04 TOSINV TOSINV00 00000003 MSFT 01000013)
    ACPI: DSDT 2fee6000 0BAEB (v01 TOSINV TOSINV00 F0000000 MSFT 01000013)
    ACPI: FACS 2fe9c000 00040
    ACPI: HPET 2fef4000 00038 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
    ACPI: APIC 2fef3000 00084 (v02 TOSINV TOSINV00 00000001 MSFT 01000013)
    ACPI: MCFG 2fef2000 0003C (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
    ACPI: BOOT 2fee5000 00028 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
    ACPI: SLIC 2fee4000 00176 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
    ACPI: SSDT 2fee3000 001BD (v01 AMD POWERNOW 00000001 AMD 00000001)
    ACPI: Local APIC address 0xfee00000
    0MB HIGHMEM available.
    767MB LOWMEM available.
    mapped low ram: 0 - 2ff00000
    low ram: 0 - 2ff00000
    Zone PFN ranges:
    DMA 0x00000001 -> 0x00001000
    Normal 0x00001000 -> 0x0002ff00
    HighMem empty
    Movable zone start PFN for each node
    early_node_map[5] active PFN ranges
    0: 0x00000001 -> 0x00000002
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0002e54a
    0: 0x0002e74a -> 0x0002fd3f
    0: 0x0002fef7 -> 0x0002ff00
    On node 0 totalpages: 195288
    free_area_init_node: node 0, pgdat c1418ac0, node_mem_map c157d020
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 3952 pages, LIFO batch:0
    Normal zone: 1502 pages used for memmap
    Normal zone: 189802 pages, LIFO batch:31
    Using APIC driver default
    ACPI: PM-Timer IO Port: 0x408
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] disabled)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x1002a201 base: 0xfed00000
    SMP: Allowing 4 CPUs, 3 hotplug CPUs
    nr_irqs_gsi: 40
    early_res array is doubled to 64 at [16000 - 167ff]
    PM: Registered nosave memory: 0000000000002000 - 0000000000010000
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    PM: Registered nosave memory: 000000002e54a000 - 000000002e74a000
    PM: Registered nosave memory: 000000002fd3f000 - 000000002fdbf000
    PM: Registered nosave memory: 000000002fdbf000 - 000000002febf000
    PM: Registered nosave memory: 000000002febf000 - 000000002fef7000
    Allocating PCI resources starting at 2ff00000 (gap: 2ff00000:c8100000)
    Booting paravirtualized kernel on bare hardware
    setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    PERCPU: Embedded 14 pages/cpu @c1c00000 s34880 r0 d22464 u1048576
    pcpu-alloc: s34880 r0 d22464 u1048576 alloc=1*4194304
    pcpu-alloc: [0] 0 1 2 3
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 193754
    Kernel command line: root=/dev/disk/by-uuid/df51f9a3-a50d-4006-a220-7f2121cc9926 ro
    PID hash table entries: 4096 (order: 2, 16384 bytes)
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    allocated 3927020 bytes of page_cgroup
    please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Subtract (53 early reservations)
    #1 [0000001000 - 0000002000] EX TRAMPOLINE
    #2 [0001000000 - 0001574184] TEXT DATA BSS
    #3 [002e3b5000 - 002e53a000] RAMDISK
    #4 [000009fc00 - 0000100000] BIOS reserved
    #5 [0001575000 - 000157b1bf] BRK
    #6 [0000010000 - 0000011000] TRAMPOLINE
    #7 [0000011000 - 0000015000] ACPI WAKEUP
    #8 [0000015000 - 0000016000] PGTABLE
    #9 [000157c000 - 000157d000] BOOTMEM
    #10 [000157d000 - 0001b7d000] BOOTMEM
    #11 [00015741c0 - 00015741c4] BOOTMEM
    #12 [0001574200 - 00015742c0] BOOTMEM
    #13 [00015742c0 - 0001574308] BOOTMEM
    #14 [0001b7d000 - 0001b80000] BOOTMEM
    #15 [0001574340 - 0001574365] BOOTMEM
    #16 [0001574380 - 00015743a7] BOOTMEM
    #17 [00015743c0 - 00015745b8] BOOTMEM
    #18 [00015745c0 - 0001574600] BOOTMEM
    #19 [0001574600 - 0001574640] BOOTMEM
    #20 [0001574640 - 0001574680] BOOTMEM
    #21 [0001574680 - 00015746c0] BOOTMEM
    #22 [00015746c0 - 0001574700] BOOTMEM
    #23 [0001574700 - 0001574740] BOOTMEM
    #24 [0001574740 - 0001574780] BOOTMEM
    #25 [0001574780 - 00015747c0] BOOTMEM
    #26 [00015747c0 - 0001574800] BOOTMEM
    #27 [0001574800 - 0001574840] BOOTMEM
    #28 [0001574840 - 0001574880] BOOTMEM
    #29 [0001574880 - 00015748c0] BOOTMEM
    #30 [00015748c0 - 0001574900] BOOTMEM
    #31 [0001574900 - 0001574940] BOOTMEM
    #32 [0001574940 - 0001574980] BOOTMEM
    #33 [0001574980 - 0001574990] BOOTMEM
    #34 [00015749c0 - 00015749d0] BOOTMEM
    #35 [0001574a00 - 0001574a10] BOOTMEM
    #36 [0001574a40 - 0001574a50] BOOTMEM
    #37 [0001574a80 - 0001574abf] BOOTMEM
    #38 [0001574ac0 - 0001574aff] BOOTMEM
    #39 [0001c00000 - 0001c0e000] BOOTMEM
    #40 [0001d00000 - 0001d0e000] BOOTMEM
    #41 [0001e00000 - 0001e0e000] BOOTMEM
    #42 [0001f00000 - 0001f0e000] BOOTMEM
    #43 [0001574b00 - 0001574b04] BOOTMEM
    #44 [0001574b40 - 0001574b44] BOOTMEM
    #45 [0001574b80 - 0001574b90] BOOTMEM
    #46 [0001574bc0 - 0001574bd0] BOOTMEM
    #47 [0001574c00 - 0001574ca0] BOOTMEM
    #48 [0001574cc0 - 0001574d08] BOOTMEM
    #49 [0001b80000 - 0001b84000] BOOTMEM
    #50 [0001c0e000 - 0001c8e000] BOOTMEM
    #51 [0001b84000 - 0001bc4000] BOOTMEM
    #52 [0001f0e000 - 00022ccbec] BOOTMEM
    Initializing HighMem for node 0 (00000000:00000000)
    Memory: 762948k/785408k available (2987k kernel code, 18204k reserved, 1237k data, 416k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf0700000 - 0xff7fe000 ( 240 MB)
    lowmem : 0xc0000000 - 0xeff00000 ( 767 MB)
    .init : 0xc1421000 - 0xc1489000 ( 416 kB)
    .data : 0xc12eac4c - 0xc1420200 (1237 kB)
    .text : 0xc1000000 - 0xc12eac4c (2987 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    Hierarchical RCU implementation.
    RCU-based detection of stalled CPUs is disabled.
    Verbose stalled-CPUs detection is disabled.
    NR_IRQS:512
    Console: colour VGA+ 80x25
    console [tty0] enabled
    hpet clockevent registered
    Fast TSC calibration using PIT
    Detected 2194.695 MHz processor.
    Calibrating delay loop (skipped), value calculated using timer frequency.. 4391.28 BogoMIPS (lpj=7315650)
    pid_max: default: 32768 minimum: 301
    Security Framework initialized
    Mount-cache hash table entries: 512
    Initializing cgroup subsys ns
    Initializing cgroup subsys cpuacct
    Initializing cgroup subsys memory
    Initializing cgroup subsys devices
    Initializing cgroup subsys freezer
    Initializing cgroup subsys net_cls
    Initializing cgroup subsys blkio
    mce: CPU supports 6 MCE banks
    using C1E aware idle routine
    Performance Events: AMD PMU driver.
    ... version: 0
    ... bit width: 48
    ... generic registers: 4
    ... value mask: 0000ffffffffffff
    ... max period: 00007fffffffffff
    ... fixed-purpose events: 0
    ... event mask: 000000000000000f
    SMP alternatives: switching to UP code
    ACPI: Core revision 20100428
    TOSHIBA Satellite detected - force copy of DSDT to local memory
    ACPI: Forced DSDT copy: length 0x0BAEB copied locally, original unmapped
    Enabling APIC mode: Flat. Using 1 I/O APICs
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: AMD V120 Processor stepping 03
    System has AMD C1E enabled
    Switch to broadcast mode on CPU0
    Brought up 1 CPUs
    Total of 1 processors activated (4391.28 BogoMIPS).
    devtmpfs: initialized
    NET: Registered protocol family 16
    node 0 link 0: io port [0, ffffff]
    TOM: 0000000040000000 aka 1024M
    Fam 10h mmconf [f8000000, fbffffff]
    node 0 link 0: mmio [a0000, bffff]
    node 0 link 0: mmio [40000000, 4fffffff]
    node 0 link 0: mmio [50000000, 520fffff]
    node 0 link 0: mmio [52100000, 522fffff]
    node 0 link 0: mmio [52300000, f7ffffff]
    node 0 link 0: mmio [f8000000, fbffffff] ==> none
    node 0 link 0: mmio [fc000000, ff6fffff]
    bus: [00, 1f] on node 0 link 0
    bus: 00 index 0 [io 0x0000-0xffff]
    bus: 00 index 1 [mem 0x000a0000-0x000bffff]
    bus: 00 index 2 [mem 0x40000000-0xf7ffffff]
    bus: 00 index 3 [mem 0xfc000000-0xffffffff]
    ACPI: bus type pci registered
    PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    PCI: MMCONFIG for 0000 [bus00-0f] at [mem 0xf8000000-0xf8ffffff] (base 0xf8000000) (size reduced!)
    PCI: Using MMCONFIG for extended config space
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: Executed 1 blocks of module-level executable AML code
    ACPI: BIOS _OSI(Linux) query ignored
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: Power Resource [PFA1] (off)
    ACPI: No dock devices found.
    PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
    pci_root PNP0A08:00: address space collision: host bridge window [mem 0x000cc000-0x000cffff] conflicts with Video ROM [mem 0x000c0000-0x000cefff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
    pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
    pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xf7ffffff]
    pci_root PNP0A08:00: host bridge window [mem 0xfc000000-0xfed3ffff]
    pci_root PNP0A08:00: host bridge window [mem 0xfed45000-0xffffffff]
    pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:04.0: PME# disabled
    pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:05.0: PME# disabled
    pci 0000:00:11.0: reg 10: [io 0x8038-0x803f]
    pci 0000:00:11.0: reg 14: [io 0x804c-0x804f]
    pci 0000:00:11.0: reg 18: [io 0x8030-0x8037]
    pci 0000:00:11.0: reg 1c: [io 0x8048-0x804b]
    pci 0000:00:11.0: reg 20: [io 0x8010-0x801f]
    pci 0000:00:11.0: reg 24: [mem 0x52307000-0x523073ff]
    pci 0000:00:12.0: reg 10: [mem 0x52306000-0x52306fff]
    pci 0000:00:12.2: reg 10: [mem 0x52307600-0x523076ff]
    pci 0000:00:12.2: supports D1 D2
    pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    pci 0000:00:12.2: PME# disabled
    pci 0000:00:13.0: reg 10: [mem 0x52305000-0x52305fff]
    pci 0000:00:13.2: reg 10: [mem 0x52307500-0x523075ff]
    pci 0000:00:13.2: supports D1 D2
    pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    pci 0000:00:13.2: PME# disabled
    pci 0000:00:14.2: reg 10: [mem 0x52300000-0x52303fff 64bit]
    pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    pci 0000:00:14.2: PME# disabled
    pci 0000:00:16.0: reg 10: [mem 0x52304000-0x52304fff]
    pci 0000:00:16.2: reg 10: [mem 0x52307400-0x523074ff]
    pci 0000:00:16.2: supports D1 D2
    pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
    pci 0000:00:16.2: PME# disabled
    pci 0000:01:05.0: reg 10: [mem 0x40000000-0x4fffffff pref]
    pci 0000:01:05.0: reg 14: [io 0x7000-0x70ff]
    pci 0000:01:05.0: reg 18: [mem 0x52200000-0x5220ffff]
    pci 0000:01:05.0: reg 24: [mem 0x52100000-0x521fffff]
    pci 0000:01:05.0: supports D1 D2
    pci 0000:00:01.0: PCI bridge to [bus 01-01]
    pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
    pci 0000:00:01.0: bridge window [mem 0x52100000-0x522fffff]
    pci 0000:00:01.0: bridge window [mem 0x40000000-0x4fffffff 64bit pref]
    pci 0000:02:00.0: reg 10: [mem 0x51100000-0x5110ffff 64bit]
    pci 0000:02:00.0: supports D1
    pci 0000:02:00.0: PME# supported from D0 D1 D3hot
    pci 0000:02:00.0: PME# disabled
    pci 0000:00:04.0: PCI bridge to [bus 02-07]
    pci 0000:00:04.0: bridge window [io 0x3000-0x6fff]
    pci 0000:00:04.0: bridge window [mem 0x51100000-0x520fffff]
    pci 0000:00:04.0: bridge window [mem 0x50000000-0x50ffffff 64bit pref]
    pci 0000:08:00.0: reg 10: [mem 0x51000000-0x5103ffff 64bit]
    pci 0000:08:00.0: reg 18: [io 0x2000-0x207f]
    pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:08:00.0: PME# disabled
    pci 0000:00:05.0: PCI bridge to [bus 08-08]
    pci 0000:00:05.0: bridge window [io 0x2000-0x2fff]
    pci 0000:00:05.0: bridge window [mem 0x51000000-0x510fffff]
    pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:14.4: PCI bridge to [bus 09-09]
    pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
    HEST: Table is not found!
    vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
    vgaarb: loaded
    PCI: Using ACPI for IRQ routing
    PCI: pci_cache_line_size set to 64 bytes
    reserve RAM buffer: 0000000000002000 - 000000000000ffff
    reserve RAM buffer: 000000000009fc00 - 000000000009ffff
    reserve RAM buffer: 000000002e54a000 - 000000002fffffff
    reserve RAM buffer: 000000002fd3f000 - 000000002fffffff
    reserve RAM buffer: 000000002ff00000 - 000000002fffffff
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    Switching to clocksource tsc
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 10 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
    system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
    system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved
    system 00:08: [io 0x0400-0x04cf] has been reserved
    system 00:08: [io 0x04d0-0x04d1] has been reserved
    system 00:08: [io 0x04d6] has been reserved
    system 00:08: [io 0x0680-0x06ff] has been reserved
    system 00:08: [io 0x077a] has been reserved
    system 00:08: [io 0x0c00-0x0c01] has been reserved
    system 00:08: [io 0x0c14] has been reserved
    system 00:08: [io 0x0c50-0x0c52] has been reserved
    system 00:08: [io 0x0c6c] has been reserved
    system 00:08: [io 0x0c6f] has been reserved
    system 00:08: [io 0x0cd0-0x0cdb] has been reserved
    system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
    system 00:09: [mem 0xffe00000-0xffffffff] has been reserved
    system 00:09: [mem 0xfed80000-0xfed80fff] has been reserved
    pci 0000:00:01.0: PCI bridge to [bus 01-01]
    pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
    pci 0000:00:01.0: bridge window [mem 0x52100000-0x522fffff]
    pci 0000:00:01.0: bridge window [mem 0x40000000-0x4fffffff 64bit pref]
    pci 0000:00:04.0: PCI bridge to [bus 02-07]
    pci 0000:00:04.0: bridge window [io 0x3000-0x6fff]
    pci 0000:00:04.0: bridge window [mem 0x51100000-0x520fffff]
    pci 0000:00:04.0: bridge window [mem 0x50000000-0x50ffffff 64bit pref]
    pci 0000:00:05.0: PCI bridge to [bus 08-08]
    pci 0000:00:05.0: bridge window [io 0x2000-0x2fff]
    pci 0000:00:05.0: bridge window [mem 0x51000000-0x510fffff]
    pci 0000:00:05.0: bridge window [mem pref disabled]
    pci 0000:00:14.4: PCI bridge to [bus 09-09]
    pci 0000:00:14.4: bridge window [io disabled]
    pci 0000:00:14.4: bridge window [mem disabled]
    pci 0000:00:14.4: bridge window [mem pref disabled]
    pci 0000:00:01.0: setting latency timer to 64
    pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:04.0: setting latency timer to 64
    pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:05.0: setting latency timer to 64
    pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
    pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
    pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
    pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
    pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
    pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
    pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
    pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
    pci_bus 0000:00: resource 18 [mem 0x40000000-0xf7ffffff]
    pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff]
    pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff]
    pci_bus 0000:01: resource 0 [io 0x7000-0x7fff]
    pci_bus 0000:01: resource 1 [mem 0x52100000-0x522fffff]
    pci_bus 0000:01: resource 2 [mem 0x40000000-0x4fffffff 64bit pref]
    pci_bus 0000:02: resource 0 [io 0x3000-0x6fff]
    pci_bus 0000:02: resource 1 [mem 0x51100000-0x520fffff]
    pci_bus 0000:02: resource 2 [mem 0x50000000-0x50ffffff 64bit pref]
    pci_bus 0000:08: resource 0 [io 0x2000-0x2fff]
    pci_bus 0000:08: resource 1 [mem 0x51000000-0x510fffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    UDP hash table entries: 512 (order: 2, 16384 bytes)
    UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    NET: Registered protocol family 1
    pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
    pci 0000:01:05.0: Boot video device
    PCI: CLS 64 bytes, default 64
    Unpacking initramfs...
    Freeing initrd memory: 1556k freed
    Simple Boot Flag at 0x44 set to 0x1
    apm: BIOS not found.
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1290023602.626:1): initialized
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1493
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pcieport 0000:00:04.0: setting latency timer to 64
    pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
    pcieport 0000:00:05.0: setting latency timer to 64
    pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
    ERST: Table is not found!
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    PM: Resume from disk failed.
    registered taskstats version 1
    Initalizing network drop monitor service
    Freeing unused kernel memory: 416k freed
    udev[31]: starting version 163
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ahci 0000:00:11.0: version 3.0
    ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    ahci 0000:00:11.0: irq 42 for MSI/MSI-X
    ahci 0000:00:11.0: AHCI 0001.0200 32 slots 3 ports 6 Gbps 0x7 impl SATA mode
    ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    ata1: SATA max UDMA/133 abar [email protected] port 0x52307100 irq 42
    ata2: SATA max UDMA/133 abar [email protected] port 0x52307180 irq 42
    ata3: SATA max UDMA/133 abar [email protected] port 0x52307200 irq 42
    ata3: SATA link down (SStatus 0 SControl 300)
    ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata1.00: ATA-8: Hitachi HTS545025B9A300, PB2OC64G, max UDMA/133
    ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    ata1.00: configured for UDMA/133
    scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54502 PB2O PQ: 0 ANSI: 5
    ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633C, TF20, max UDMA/100
    ata2.00: configured for UDMA/100
    scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633C TF20 PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    sda1 sda2 sda3 sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    rtc_cmos 00:04: RTC can wake from S4
    rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
    udev[1064]: starting version 163
    atl1c 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    atl1c 0000:08:00.0: setting latency timer to 64
    atl1c 0000:08:00.0: version 1.0.0.2-NAPI
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [THZN] (58 C)
    ACPI: acpi_idle registered with cpuidle
    ACPI: processor limited to max C-state 1
    input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
    ACPI: Power Button [PWRB]
    input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
    ACPI: Lid Switch [LID]
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    ACPI: Power Button [PWRF]
    input: PC Speaker as /devices/platform/pcspkr/input/input4
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 1022 ss_did 9602
    shpchp 0000:00:01.0: Cannot reserve MMIO region
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    ACPI: AC Adapter [ADP0] (on-line)
    cfg80211: Calling CRDA to update world regulatory domain
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    ehci_hcd 0000:00:12.2: setting latency timer to 64
    ehci_hcd 0000:00:12.2: EHCI Host Controller
    ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:12.2: debug port 1
    ehci_hcd 0000:00:12.2: irq 17, io mem 0x52307600
    ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 5 ports detected
    ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    ehci_hcd 0000:00:13.2: setting latency timer to 64
    ehci_hcd 0000:00:13.2: EHCI Host Controller
    ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:13.2: debug port 1
    ehci_hcd 0000:00:13.2: irq 17, io mem 0x52307500
    ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 5 ports detected
    ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    ehci_hcd 0000:00:16.2: setting latency timer to 64
    ehci_hcd 0000:00:16.2: EHCI Host Controller
    ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
    ehci_hcd 0000:00:16.2: debug port 1
    ehci_hcd 0000:00:16.2: irq 17, io mem 0x52307400
    ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 4 ports detected
    ACPI: Fan [FAN1] (off)
    ACPI: Battery Slot [BAT0] (battery present)
    piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
    acpi device:02: registered as cooling_device2
    input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input5
    ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    usb 2-2: new high speed USB device using ehci_hcd and address 2
    Linux agpgart interface v0.103
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    ohci_hcd 0000:00:12.0: setting latency timer to 64
    ohci_hcd 0000:00:12.0: OHCI Host Controller
    ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
    ohci_hcd 0000:00:12.0: irq 18, io mem 0x52306000
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 5 ports detected
    ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    ohci_hcd 0000:00:13.0: setting latency timer to 64
    ohci_hcd 0000:00:13.0: OHCI Host Controller
    ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
    ohci_hcd 0000:00:13.0: irq 18, io mem 0x52305000
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 5 ports detected
    ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    ohci_hcd 0000:00:16.0: setting latency timer to 64
    ohci_hcd 0000:00:16.0: OHCI Host Controller
    ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 6
    ohci_hcd 0000:00:16.0: irq 18, io mem 0x52304000
    ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    ath9k 0000:02:00.0: setting latency timer to 64
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 4 ports detected
    ath: EEPROM regdomain: 0x65
    ath: EEPROM indicates we should expect a direct regpair map
    ath: Country alpha2 being used: 00
    ath: Regpair used: 0x65
    [drm] Initialized drm 1.1.0 20060810
    phy0: Selected rate control algorithm 'ath9k_rate_control'
    Registered led device: ath9k-phy0::radio
    Registered led device: ath9k-phy0::assoc
    Registered led device: ath9k-phy0::tx
    Registered led device: ath9k-phy0::rx
    phy0: Atheros AR9285 Rev:2 mem=0xf0c60000, irq=16
    Initializing USB Mass Storage driver...
    scsi3 : usb-storage 2-2:1.0
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    usb 3-4: new high speed USB device using ehci_hcd and address 2
    HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    HDA Intel 0000:00:14.2: setting latency timer to 64
    [drm] radeon defaulting to kernel modesetting.
    [drm] radeon kernel modesetting enabled.
    radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    radeon 0000:01:05.0: setting latency timer to 64
    [drm] initializing kernel modesetting (RS880 0x1002:0x9712).
    [drm] register mmio base: 0x52200000
    [drm] register mmio size: 65536
    ATOM BIOS: Tos_Berlin10AD
    [drm] Clocks initialized !
    radeon 0000:01:05.0: VRAM: 256M 0xC0000000 - 0xCFFFFFFF (256M used)
    radeon 0000:01:05.0: GTT: 512M 0xA0000000 - 0xBFFFFFFF
    [drm] Detected VRAM RAM=256M, BAR=256M
    [drm] RAM width 32bits DDR
    [TTM] Zone kernel: Available graphics memory: 382460 kiB.
    [TTM] Initializing pool allocator.
    [drm] radeon: 256M of VRAM memory ready
    [drm] radeon: 512M of GTT memory ready.
    [drm] radeon: irq initialized.
    [drm] GART: num cpu pages 131072, num gpu pages 131072
    [drm] Loading RS780 Microcode
    Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000
    synaptics: Toshiba Satellite Pro C650D detected, limiting rate to 40pps.
    input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
    [drm] ring test succeeded in 0 usecs
    [drm] radeon: ib pool ready.
    [drm] ib test succeeded in 0 usecs
    [drm] Enabling audio support
    [drm] Unknown TV standard; defaulting to NTSC
    [drm] Radeon Display Connectors
    [drm] Connector 0:
    [drm] VGA
    [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
    [drm] Encoders:
    [drm] CRT1: INTERNAL_KLDSCP_DAC1
    [drm] Connector 1:
    [drm] LVDS
    [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
    [drm] Encoders:
    [drm] LCD1: INTERNAL_KLDSCP_LVTMA
    [drm] radeon: power management initialized
    [drm] fb mappable at 0x40141000
    [drm] vram apper at 0x40000000
    [drm] size 4325376
    [drm] fb depth is 24
    [drm] pitch is 5632
    scsi 3:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
    sd 3:0:0:0: Attached scsi generic sg2 type 0
    sd 3:0:0:0: [sdb] Attached SCSI removable disk
    Linux video capture interface: v2.00
    uvcvideo: Found UVC 1.00 device USB Camera (10f1:1a2a)
    input: USB Camera as /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/input/input7
    usbcore: registered new interface driver uvcvideo
    USB Video Class driver (v0.1.0)
    Console: switching to colour frame buffer device 170x48
    fb0: radeondrmfb frame buffer device
    drm: registered panic notifier
    Slow work thread pool: Starting up
    Slow work thread pool: Ready
    [drm] Initialized radeon 2.5.0 20080528 for 0000:01:05.0 on minor 0
    EXT4-fs (sda3): re-mounted. Opts: (null)
    EXT4-fs (sda3): re-mounted. Opts: (null)
    EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    Adding 265068k swap on /dev/sda2. Priority:-1 extents:1 across:265068k
    atl1c 0000:08:00.0: irq 43 for MSI/MSI-X
    atl1c 0000:08:00.0: irq 43 for MSI/MSI-X
    wlan0: deauthenticating from 00:1d:7e:af:65:43 by local choice (reason=3)
    wlan0: deauthenticating from 00:1d:7e:af:65:43 by local choice (reason=3)
    wlan0: authenticate with 00:1d:7e:af:65:43 (try 1)
    wlan0: authenticated
    wlan0: associate with 00:1d:7e:af:65:43 (try 1)
    wlan0: RX AssocResp from 00:1d:7e:af:65:43 (capab=0x421 status=0 aid=2)
    wlan0: associated
    cfg80211: Calling CRDA for country: NA
    fuse init (API version 7.14)
    ata1.00: configured for UDMA/133
    ata1: EH complete
    EXT4-fs (sda3): re-mounted. Opts: commit=0
    EXT4-fs (sda4): re-mounted. Opts: commit=0
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    wlan0: no IPv6 routers present
    process `skype' is using obsolete setsockopt SO_BSDCOMPAT
    usb 1-2: new high speed USB device using ehci_hcd and address 2
    scsi4 : usb-storage 1-2:1.1
    scsi 4:0:0:0: Direct-Access ZTE Mass Storage ffff PQ: 0 ANSI: 2
    sd 4:0:0:0: Attached scsi generic sg3 type 0
    sd 4:0:0:0: [sdc] Attached SCSI removable disk
    usb 1-2: USB disconnect, address 2
    amixer
    Simple mixer control 'Master',0
    Capabilities: pvolume pswitch pswitch-joined penum
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 74
    Mono:
    Front Left: Playback 74 [100%] [0.00dB] [on]
    Front Right: Playback 74 [100%] [0.00dB] [on]
    Simple mixer control 'PCM',0
    Capabilities: pvolume penum
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 255
    Mono:
    Front Left: Playback 213 [84%] [-8.40dB]
    Front Right: Playback 213 [84%] [-8.40dB]
    Simple mixer control 'Mic B',0
    Capabilities: cswitch cswitch-joined cswitch-exclusive penum
    Capture exclusive group: 0
    Capture channels: Mono
    Mono: Capture [off]
    Simple mixer control 'Mic C',0
    Capabilities: cswitch cswitch-joined cswitch-exclusive penum
    Capture exclusive group: 0
    Capture channels: Mono
    Mono: Capture [off]
    Simple mixer control 'Mic E',0
    Capabilities: cswitch cswitch-joined cswitch-exclusive penum
    Capture exclusive group: 0
    Capture channels: Mono
    Mono: Capture [on]
    Simple mixer control 'Mic F',0
    Capabilities: cswitch cswitch-joined cswitch-exclusive penum
    Capture exclusive group: 0
    Capture channels: Mono
    Mono: Capture [off]
    Simple mixer control 'IEC958',0
    Capabilities: pswitch pswitch-joined penum
    Playback channels: Mono
    Mono: Playback [on]
    Simple mixer control 'IEC958 Default PCM',0
    Capabilities: pswitch pswitch-joined penum
    Playback channels: Mono
    Mono: Playback [on]
    Simple mixer control 'Capture',0
    Capabilities: cvolume cswitch penum
    Capture channels: Front Left - Front Right
    Limits: Capture 0 - 80
    Front Left: Capture 80 [100%] [6.00dB] [on]
    Front Right: Capture 80 [100%] [6.00dB] [on]
    Simple mixer control 'Analog Mic Boost',0
    Capabilities: cenum
    Items: '0dB' '10dB' '20dB' '30dB' '40dB'
    Item0: '0dB'
    Simple mixer control 'Digital',0
    Capabilities: cvolume penum
    Capture channels: Front Left - Front Right
    Limits: Capture 0 - 120
    Front Left: Capture 98 [82%] [19.00dB]
    Front Right: Capture 98 [82%] [19.00dB]
    Any help would be thoroughly appreciated.
    Thanks!
    John.

    firstly, sorry for my english
    I have HP ProBook 4515s. the lspci says the same on 00:14.*
    00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge
    00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx)
    00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
    00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3)
    00:09.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 4)
    00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode]
    00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
    00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
    00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
    00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
    00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
    00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
    00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3c)
    00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
    00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
    00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
    00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller
    00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
    00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
    00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
    00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
    00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
    01:05.0 VGA compatible controller: ATI Technologies Inc M880G [Mobility Radeon HD 4200]
    01:05.1 Audio device: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200]
    02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8072 PCI-E Gigabit Ethernet Controller (rev 10)
    06:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
    looks like we've got the same chipset.
    one stupid pdf-file found on hp.com sais that the codec is ADI 1984AJCPZ High Definition CODEC, but I can't be sure...
    i tried different model= parameters to snd-hda-intel module, but nothin helps
    i can capture external jack-in microphone only if external jack-out is free (which is completely stupid for home audio studio experiencing)
    internal phones are not mute automatically until jack-in freed (but i can easily mute them in alsamixer instead)
    if anyone find a workaround or anything useful, please report here or use my contacts

  • My Mac Mini Server HD works but not the Mac HD2 drive ,How do i start using the Macintosh HD2

    hi
    i have a mac mini, late 2011, 1 TB but server addition, with two 500GB drives
    The server drive works with users, but how do i get the Macintosh drive HD
    i cant work out how to start up,
    or process to give access, claims no right to access
    the machine shipped with Lion but i upgraded to mountiain lion.
    i have search and search and cant find the how too in anything apple issue
    very disappointing
    can you help?

    In Finder, highlight Mac HD2, do a Gwtinfo on it, unlock the lock & add rights there.

  • Audio working but not the video?

    I have iChat AV 3.1.8 (v445)
    And OSX (10.4.11)
    I am trying to connect to a user using AIM, and the video connection is establishing but it wont show the video, only the audio.
    Things I think you would need to know.
    Using Wi-Fi connection.
    The other user does not have a camera attached.
    Have my restriction set to 200.
    Using Comcast.
    Now when the user connects their camera I get a error message saying "There was a communication error during your chat" with a send to Apple option.

    I've been having this problem since upgrading to leopard. On my iMac with Tiger i could video chat with AIM users in a one way chat without any problems. Upgraded to leopard and all they have is a black screen, but the audio is coming through. The only thing that was changed was the OS Version.
    I am also having the same exact problem on my new MacBook, which came with leopard installed.
    On a side note, i can nolonger video chat with Tiger users, but everything seems to be fine with other Leopard users.
    Seems like there are a lot of these problems going around. Any idea on an ETA for a fix?

  • I bought an I phone 5 in the USA in April. Worked fine until yesterday. will not connect the telephone now. the internet works but not the telephone.

    I phone 5 purchased in USA not tied to provider. Brought to Azerbaijan and set up with Elcell - worked good for 3 months - then would not connect the telephone. SIM card OK as it works in other phones.

    Warranty and support is only valid in the country of origin. Return the device to the US for evaluation and possible replacement.

Maybe you are looking for

  • How do I Transfer songs from my iTunes library, without losing all the songs already on my iPhone?

    I have an apple iPhone 3G, and got some songs from youtube to mp3 into my iTunes library. I don't want to lose all the songs already on my playlist even though I want to sync the songs to my iPhone. Also, it won't let me drag the songs to the little

  • Reversing the reversal document

    Hi, I have an request, User had done stock transfer for example A to B(Plants) with a given document no and with mov type 641.And again  he had reversed the document by mov type 642. Now he want to reverse the document from mov type 642 to mov type 6

  • Another failed update...Itunes 7 won't open!

    Why do I always make the mistake of installing updates as everytime I do they never seem to work. It takes me time to come in here and beg for help from someone to get me back in the music business. Currently I can't open itunes at all on my computer

  • How to find pre_cupa in sap std

    plz can anyone help for thsi question

  • PRD system recovery - "HOLD" & "To Be Delivered" messages

    Hi Gurus, I'd like to discuss this crucial thing. In our systems occures sometimes this probem - messages in "HOLD" status and "To Be Delivered" status. HOLD status - occurs in serialized queues (EIEO) when error occurs in some message in this queue,