ACS upgrade from 4.0.x to 4.1.x "Appliance upgrade in progress"

Hello friends,
We are in the process of upgrading ACS 4.0 to 4.1 in a SE appliance 1113.
We followed very carefuly the steps, and upgraded de Appliance management ACS 4.1. The second upgrade (Software for appliance 4.1) keeps showing "Appliance upgrade in progress..." (near 2 hours by now). I know that it can stick even finishing, but it seems it has not finished because we can not log in with the GUI Administrator account like we did when upgrading the management software (previous step).
Is this normal? what can be missing?, I attach the console text output below (IP adds obscured).
Note the management upgrade went fine.
Thanks.
Cisco Secure ACS: 4.1.1.23
ACS 4.0.1.49-CSAdmin-CSCsd96293_CSCse26719 Fix: (Patch: 4.0.1.49 Tue 01/09/2007
7:50:00.17)
Appliance Management Software: 4.1.1.23
Appliance Base Image: 4.0.1.2
CSA build 4.0.1.543.2: (Patch: 4_0_1_543)
Appliance upgrade in progress...
Session Timeout: 10
Last Reboot Time: Fri Jun 06 11:46:40 2008
Current Date & Time: 6/6/2008 13:17:40
Time Zone: (GMT-05:00) Bogota, Lima, Quito
NTP Server(s): 131.107.1.10
CPU Load Free Disk Free Physical Memory
0.00% 16.9 GB 765 MB
Appliance IP Configuration
DHCP Enabled. . . . . . . . . . .: No
IP Address. . . . . . . . . . . .: 172.16.x.y
Subnet Mask . . . . . . . . . . .: 255.255.255.0
Default Gateway . . . . . . . . .: 172.6.x2.y2
DNS Servers . . . . . . . . . . .: 172.16.x3.y3
CSAdmin running
CSAuth running
CSDbSync running
CSLog running
CSMon running
CSRadius running
CSTacacs running
CSAgent stopped
Appliance upgrade in progress...

Thanks Jagdeep, but the upgrade has not finished.
The documentation mentions (please read it carefully):
"IF YOU COMPLETE THE UPGRADE and the ACS console displays the message Appliance upgrade in progress, this indicates that the upgrade PROGRESS is hanging.
If this condition occurs, start an ACS console session and enter the command download [hostAddress], where hostAddress can be any IP address. This action releases the ACS console from the upgrade process."
What worries me is that it has not finished.
As I said in my post, we can not log in :( (the GUI gets blocked during the upgrade).
I appreciate the help. Many Thanks.

Similar Messages

I'm worried about what will happen if I delete my recent backup data from the phone I still own? Will I lose any progress in games that was saved in the backup?

I'm worried about what will happen if I delete my recent backup data from the phone I still own? Will I lose any progress in games that was saved in the backup?
I have an iPhone 4S and I keep getting those irritating notifications that tell me I need to upgrade my storage or free up space. I've deleted all I can from my music and photos without losing too many precious memories, but it's come to the point where I think I need to delete backups. However, I'm just worried that I will lose all and any log-in information that I don't remember and app/game progress that was saved to the iCloud. Please Tell me what will happen/what I can do?

If you are asking what happens when you delete an iCloud backup, it only deletes the backup from your account. It won't do anything to the data on your phone or in your iCloud account. If you don't need to backup you can delete it. (If you no longer want to back up your phone to iCloud, turn iCloud backup off in Settings>iCloud>Backup. Then your phone will back up to your computer each time you sync it with iTunes.)

Outlook 2013 "Upgrade In Progress"

I recently got Office 2013 and since I have it, my outlook has been displaying "upgrade in progress" because of which I can't log in or add an account!
I have done the whole "repair" for it twice and it's still displaying the same message. This is really frustrating me.
If there's still a way to fix it then let me know please.
Thank you

Hi,
To resolve the issue, try Online Repair:
Control Panel > Program and Features > Microsoft Office > Change > Online Repair.
If this doesn't work, please uninstall Office and reinstall it.
Regards.
Melon Chen
TechNet Community Support

Scshutdown fails - "Rolling Upgrade in progress"

Anybody seen this before?
bash$ sudo scshutdown -g 0 -y
scshutdown: Cannot shutdown the cluster. Rolling Upgrade in progress.
bash$
No one has (with intention) started an upgrade on this cluster.. Its SC3.1 U2 on Solaris 8.

While you are saying that no one hast started an upgrade, is it possible that this cluster got recently patched with current Sun Cluster patches?
If so, you might want to check if the follwoing binary exists on your cluster:
/usr/cluster/bin/scversions
If it exists, just call it.
If you see something like:
# scversions
Upgrade commit is NOT needed. All versions match.
then I don't know what your problem is. However, if it says something different, you might want to try:
# scversions -c
and see if the problem went away.
Greets
Thorsten

Hi, an hour ago I was about 75% complete downloading OS X Mountain Lion. I was using a wifi connection on an cafe. I turned off my wifi, forgetting to pause the downloading. Now I am re-downloading from start. Is there a way to retrieve that 75% progress?

Hi, an hour ago I was about 75% progress downloading OS X Mountain Lion. I was using a wifi connection on an cafe. I turned off my wifi, forgetting to pause the downloading. Now I am re-downloading from start. Is there a way to retrieve that 75% progress? Thanks for help.

I wouldn't do that either. Just let it complete.
Pausing then disconnection you I net connection may drop the download again and then you may have to start over.

Outlook 2013 displaying "Upgrade in Progress" problem. Possible Patching issue?

Some of our Outlook 2013 clients have been displaying "upgrade in progress" It was doing this for hours. I could no longer get new mails while this was happening. It all started after we had patches installed. Since we are using
this new system for patch installation I think it could have been a patch that would have caused this. It could be any number of factors but the new patch management system we have could have installed a patch we normally do not have.
Some factors to consider:
1.) I had Outlook 2010 on my computer as well. I uninstalled this and it did not fix.
2.) Was running Outlook 2013 for months with no issue.
3.) We use Office 365 for our corporate email.
4.) Altiris (Symantec Management Console) is being used to patch our machines and it started after patches were installed.
Control Panel > Program and Features > Microsoft Office > Change > Online Repair. fixed the problem.
I was hoping someone maybe to help explain how this could have happened.
Since the computers having this problem are in our test environment and we have not yet deployed Altiris patching solution for the rest of the company yet is a relief but we would like to know if anyone else may have had a problem with this after a certain
patch that maybe they can identify.
Thank you!

Hi,
Did the patches you installed include some update for other version of Office?
Last time I see this issue is when two versions of Outlook (Outlook 2010 and Outlook 2013) are installed on one computer. Please check if the clients with this problem are installed two versions of Outlook. Although we can have two versions of
Outlook on the same machine, only one version of Outlook can run at a time. Moreover, when we install Outlook 2013 first and then Outlook 2010, it may cause some unwanted issues. The method to fix such issue is to repair Office 2013.
So I guess there are some updates for Outlook 2010 in the patches which caused the conflict of two versions of Outlook.
Flynn

How to get rid of out of use appliances from ADE so I can authorise my new appliance?

My A.D.E will n ot authorise my new Kobo e-reader. When I try it says there are too many authorisations already. How do I get rid of (unauthorise) out of use appliances ie my two previous and now out of date kobo e-readers from ADE so I can authorise my new appliance?

You need to talk with Adobe service.
They will remove ALL your registrations, and you will need to reregister the ones you want.
For some reason, Adobe doesn't have any sensible online system for viewing/editing registrations.
http://www.adobe.com/support/digitaleditions/supportinfo/
and open a Chat.
Infor from FAQ at
http://www.adobe.com/uk/products/digital-editions/faq.html
See 'What is the maximum number of computers and devices that I can activate?'
which forwards you to
http://helpx.adobe.com/digital-editions.html
which eventually gets you ('contact support' to
http://www.adobe.com/support/digitaleditions/supportinfo/

Part number to upgrade ACS 1113 from 4.2 to 5.1

I would like to upgrade my ACS server SE 1113 from 4.2 to 5.x but I cannot seem to find a part number. Does anyone know what the license part number may be?
Thanks,
Gary

Gary,
See here:
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps5698/ps6767/ps9911/product_bulletin_c25-569135.html
HTH,
Faisal
If you find this post helpful, please rate so others can find the answer easily

ACS upgrade from 4.2.1.15 to ACS5.6

HI
We have bought new ACS5.6 SNS3415 Boxes , earlier we have ACS4.2.1.15 , now we want to migrate the data from old ACS to new ACS.
We have downloaded the ACS and trying to install 4.2.1.15 but getting the error
" ACS4.2.115 can only be installed on top of base version"
So we have installed the eval-ACS-4.2.0.124-SW successfully. And now we are trying to install the 4.2.1.15 but we are getting eth below error
" 4.2.1.5 can not be installed on EVAL version"
How can we resolve this so that we can migrate the data to ACS5.6 via migration utility.

Refer the link : https://supportforums.cisco.com/discussion/11513026/migrating-acs-420-421
you can directly upgrade from 4.2.0.124 to 5.6 : http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-6/user/guide/acsuserguide/migrate.html#98379

Upgrading an ACS deployment from 5.3 to 5.5, runtime service doesn't restart.

Hello at all.
I'm restoring a 5.3 backup to a new ACS 5.5 patch 3.
Restore procedure works fine but when I restart the server service runtime doesn't restart.
acsuno/admin# sh app stat acs
ACS role: PRIMARY
Process 'database'                  running
Process 'management'                running
Process 'runtime'                   not monitored
Process 'ntpd'                      running
Process 'view-database'             running
Process 'view-jobmanager'           running
Process 'view-alertmanager'         running
Process 'view-collector'            running
Process 'view-logprocessor'         running
This is the end of debug log file...
Daemon,13/06/2014,18:52:37:455,ERROR,3086411504,rt_daemon init failed,RTDaemon.cpp:325
Daemon,13/06/2014,18:52:37:455,ERROR,3086411504,ConfigNotificationFlow::waitStart: unable to load configuration: fatal error,RTDaemon.cpp:326
Daemon,13/06/2014,18:52:37:455,ERROR,3086411504,rc = 4,RTDaemon.cpp:327
Any ideas?
Many thanks.
Regards.
Andrea

Hi,
Manually restart the runtime process from the CLI and rebooting the appliance resolves this issue.
In order to restart the runtime processes manually, issue these commands from the ACS CLI
- acs stop runtime
- acs start runtime

Upgrading an ACS Server from 5.0 to 5.1

I'wont to upgade my ACS server 5.0.0.21 to 5.1 . I wont to use Active Directory . it's seem that in my curent version AD is not supported !
I try to do it by CLI
what CLi command I use and what patch ?
Thanks !

in the monitoring and report I have this
AAA Protocol > TACACS+ Authentication
Authentication Status :
Pass or Fail
Date :
December 09, 2009
Dec 9,09 11:52:20.200 AM
13029 Requested privilege level too high
admin.ad
switch
Device Type:All Device Types, Location:All Locations
Default Device Admin
AD1
Thanks !

ACS migration from 4.1.1.23 to 5.6

Dear Team.
We need to upgrade an ACS 4.1.1.23 to a new ACS 5.6. This means a data migration from ACS 4.1.1.24 to 5.6
The migration guide says that the migration utility must be run on a 4.1.1.24 to check the DB integrity and make some modifications.
Our client has an ACS 4.1.1.23.
In the Cisco Download page for ACS 4.1.1.24 there isn't any acumulative patch to 4.1.1.24. Anyone has any idea how we can upgrade the ACS 4.1.1.23 to .24?
After this patch will be applied, we will backup data from 4.1.1.24 to migration server 4.1.1.24 with demo license (this file exist on Download Center)
Thanks.

You can upgrade to 4.2 and then to 5.6
ACS 4.2 with the recovery DVD, no need to upgrade to ACS 4.1.1.24 and then to 4.2.
Remember to make a backup before the upgrade.
There is a feature that allows you to restore any ACS 4.1 backup into ACS 4.2.
"Before you begin any upgrade procedure, we recommend that you back up your existing data and configuration. When, upgrading do a re-image of ACS 4.2 and then restore the ACS 4.1 configuration."
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/solution_engine/upgap.html#wp1120037
http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-6/user/guide/acsuserguide/migrate.html#pgfId-1057975

ACS Upgrade in live network ok?

I am about to upgrade our CiscoSecure ACS from 4.1 to 4.2. If I do so on a live network, can that affect anything within my network?
I would hate to bring down an entire network and upset about 3000 users.
Thanks in advance!

That will prevent that particular ACS to authenticate new users for the time of the upgrade ...
Existing users won't be kicked out unless you configured a very frequent reauthentication timer.
If you have more than one ACS then the other should be there to take the job

ACS upgrade on windows

Hi,
I have ACS 4.1 installed on my windows servers, i want upgrade it to ACS 4.2.0.124
Can i download the this version from cisco and upgrade?
i would like to know the procedure to upgrade
Please help
Thanks
Ravi

Create a TAC case and request Special File Access. If you are entitled they will post the files and send you an email with the URL where you can download the new software. Then simply follow the documented upgrade instructions.

ACS Upgrade 4.1

We are in process on migrating over to an ACS appliance 4.1. I have downloaded updates and have launched the autorun.bat file. After running the update to 4.1.3.12 CSAdmin fails to start. Tried starting it manually via serial port, but no luck. The previous version was 4.1.1.23
any assistance would be appreciated

Hi
Its nothing known that I know about on CSAdmin stopping after upgrading. I hope you have a database backup from ACS 4.1.1.23 version?
Try to give it a reboot.
And I hope you applied management Upgrade first and then software upgrade?
Regards,
Prem

ACS upgrade from 4.0.x to 4.1.x "Appliance upgrade in progress"

Similar Messages

Maybe you are looking for