ActionScript generation - Can it ignore ActionScript keywords in 4.0.1?

When using Flash Builder eclipse plug-in Version 4.0 (build 272416), we are able to digest the Data/Services of a BlazeDS enabled server. The ActionScript generator dynamically connects to the BlazeDS server, and then generates the necessary ActionScript. Another developer happened to download their Flash Builder a few weeks later 4.0.1 (build 277662) and is getting the following error when attepting to digest the Data/Services:
ActionScript generation is not supported for entities containing properties or methods that clash with ActionScript keywords. Entity "MapLink" contains illegal property "to".
Indeed, the error message is correct; Our MapLink object does have an attribute "to". However, we have no ability to change this attribute!
So my question is: Is there a way to configure the ActionScript generator to ignore this rule? Or is there another work-around for this (other than roll all the developers back to the 4.0 version of Flash Builder)

I have the same error with defferent phrase :
ERROR [1]: ActionScript generation is not supported for entities containing properties or methods that clash with ActionScript keywords. Entity "CachedClass" contains illegal property "void".
It happens when i try to digest a groovy entity (domain class) using the BlazeDS. Did any one resolve this issue ?

Similar Messages

In the iPod touch 5th generation can I put a wifi card in it ? Like wifi Vodafone card like in the iPad 3G, In the iPod touch 5th generation can I put a wifi card in it ? Like wifi Vodafone card like in the iPad 3G

In the iPod touch 5th generation can I put a wifi card like Vodafone wifi cards I put a wifi card in my iPad 3G and it works what about ipod ?

Wi-fi card?
The ipod has wi-fi bult in.
Why would you need a wi-fi card?
It sounds like you are talking about a SIM card, which has nothing at all to do with wi-fi. It is for cellular service from a wireless phone provider. If this is what you mean, then no. Ipods are not cell phones and cannot access cellular data.

Can you apply ranged keywords to synchronized clips?

Howdy y'all,
I have two audio files representing separate sides of a conversation, recorded with two separate mics. (This lets me control their levels and such in post, individually.) It's trivial to turn these two clips into a single Syncronized clip, once I make whatever adjustments I wish to them indivudally. So far so good.
Now I'm at the point where I want to log the major sections of this conversation, marking ranges with keywords. But while I can select ranges on the synchronized clip with the range tool (or setting in / out points as I listen), I can't seem to assign keywords to any of these ranges. I can bring up the keyword editor and type stuff all right, but no keyword I thus create ever gets assigned to the syncronized clip. It seems that the most I can do is keyword only one or the other of the synchronized clip's constituent clips. I don't wanna do that; I want to log the whole, synthezied conversation, not just one mic's output.
I have also tried to do this by treating the separate tracks as a compound clip rather than a syncronized clip, and I encounter the same issue.
Am I missing something, or using the wrong FCPX idiom? Or can you simply not log at any level other than at the lowest level of original clips? (Which would make me sad and confused...)
Background: I am yet another person coming to FCPX after cutting my A/V teeth years ago on (in this case) FCP 5. And yes, I'm trying to use this to edit together an audio-only podcast. I got good enough at "classic" FCP idioms that I wouldn't think twice about doing it, despite the lack of a video element in the source, so it seemed natural to use FCPX for this project today. If I am flat-out using the wrong tool, please let me know. But I tried using GarageBand for this, and the lack of e.g. j/k/l made me instantly hate it...

Thanks; that does seem to do the trick.
I don't suppose there's a way to bring up a visualization of a clip's audio waveform in the viewer pane? (I refer to the middle pane in the top row.) I feel a bit crowded working with a lengthy audio track using only that tiny, scrunched view in the browser pane, and I seem to recall that you could change the view in classic FCP to display only the audio.
If I'm just doing coarse-level logging it isn't a huge deal, and I'm willing to concede that this is one thing I have to live with using a video editor on an audio-only project. But it'd be nice to have...

What if my ipod touch 4th generation can't update and now the only option is to restore it. And i don't know what happens if i press restore?

What if my ipod touch 4th generation can't update and now the only option is to restore it.
And i don't know what happens if i press restore?
Will it show my back up and back it up or what?
And if that does happen will all my pictures stil be there?
Also i'm not on a apple computer.

To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Either a PC or Mac work the same.
The photos in our iPod's Camera Roll album will be restored as will the last 30 days of photos in our PhotoStream album

The ipod nano 6th generation can be traced back if stolen?

The ipod nano 6th generation can be traced back if stolen? How, if so?

It cannot be traced.

Use of CR, how can we ignore the cutting information?

Olympus's ORF file with a clipping information (such as when shooting 16:9), CS5 Camera Raw 6.5 can not ignore this information to obtain the original image (4:3) it?

Hai,
ST05 is used for Performance Trace.
There are diffrent traces avaliable.
- SQL Trace
- Enque Trace
- RFC Trace
- Table buffer Trace
ST05 Is transaction code to get the initial screen of the Performance Trace.
You have to activate the Trace using Activate Trace pushbutton.
Go to SE38 Transaction and Select Your Program Name and Execute it.
Come Back to ST05 Screen and Deactivate The trace using Deactivate Trace button on Intial screen.
For the performance reasons , You should switch off the Traces.
The Result of the trace stored in one or more Trace Files.
you can use Display Trace option to Analyzing the Performance Data.
I hope it will help you.
With Regards,
Bala Murali

HT4623 I have a ipad 1st generation can I update to iOS 7.0

I have a ipad 1st generation can I update to iOS 7.0

No.
5.1.1 is the highest iOS the first generation can go to.

Help my you tube app for i-touch 1st generation can not connect to youtube

help my you tube app for i-touch 1st generation can not connect to youtube. it was working for only my previous history and now its says it cannot connect to you tube. and other times its say error. please help.

Click on the blue arrow to the right of the network name, if IP address starts with "169." ,restart your router. It should connect properly after your router reboots in a minute or two.

Why can't I add keywords in Lightroom 5.7 at Photo/Add Keywords?

Why can't I add keywords in Lightroom 5.7 at Photo/Add Keywords?

You need to be much more verbose about "can't".
Any error messages?
Make sure the right pane of tabs is visible. The menu command is just a jumper into the "keywording" tab.

HT202789 How can I apply new keywords in iMovie (2013)?

I can't find the keyword button and can't activate it in advanced tools anymore, so how do I apply keywords to clips in iMovie (2013)?

Greetings anadk,
Thanks for contributing to the Apple Support Communities.
It looks like you've found the article regarding accessing keywords from previous versions of iMovie in iMovie (2013). While you can use keywords from projects created in previous version of iMovie, this is not a feature of the current version.
You can find some good tips for organizing clips in your iMovie (2013) projects at the Help page:
Library overview - iMovie Help
All the best,
Jeremy

HT4007 What happened to my keywords? Since the last update of aperture I can't see my keywords anymore! Who will help me find them back?

What happened to my keywords? Since the last update of aperture I can't see my keywords anymore! Every photo (1000s of images) had several keywords, but they're all gone. (Or at least I can't see them anymore.) Who will help me find them back?

You need to enable the display for metadata in Browser and Viewer.
There are several places how whereyou can turn it on; for example, from the main menu bar "view" menu:
View > Metadata display > Viewer > Show Metadata
View > Metadata display > Browser > Show Metadata
You need to configure the Metadata shown in these overlays.
Use
View > Metadata display > Browser > Customize
Enable all tags you want in the left column of this panel. The "keyword" are enabled in the "Content" section of the left colum.
Regards
Léonie

Can you make a Keyword Collection for entire event library?

Hello all,
So you make an event, and you can make Keyword Collections for that particular event, such as "WS" or "Person 1" or "Indoors"... But...
What if those keywords apply to other events?
I am making video content for a particular company. I shoot stuff one day import as an event. The only content that I produce is for this company, so you can imagine there are going to be similar themes across mutable events...
As you know this is how it is organized >
DRIVE
>2012
>Event
      >Keyword Collection
This is how I want to get organized>
DRIVE
Master Keyword Collection
>2012
>Event
     >Keyword Collection
> Here is an example of how I think It should be
DRIVE
"All Interior Shots"
>2012
> Event
     >Interior Shots
So can you make a Keyword Collection for entire event library?
Can some one please explain if is this is possible? If not please update!

Andy,
Yes you can but that feature only works if you are searching a single event (Pretty Cool/Useful), Creating a smart collection based on what you tick off in the dialogue box... You will get an error message if Searching the drive itself:
LOL
I did some playing around...
I created a new event
Then I ran a search, with Keywords ticked off, Ticking off mutable Keyword Collections.
Then dragged the results into my new event.
This in effect created "saved search results" but Final Cut started copying clips to that event folder that was created on my external HD. I was hoping that It would generate alias files...
I also...
Created a new project
Ran the Search with Keywords
Dragged all clips into the project..
This also in effect created "saved search results" but not really what I was hoping :/

Can you color code keywords?

When I apply keywords to clip segments, the bar that appears at the top of each segment is blue. If I have overlapping segments, each with a different keyword, or two segments back to back, each with a different keyword, it looks like one single keyword application.
Can I color code keywords so that the keyword bars are a different color for each keyword?

I don't think so. But you can click VIEW/PLAYHEAD INFO and see the keywords as you skim.

Apple TV 1st generation- can't seem to transfer rented Itune movies from my Mac to the Apple TV

Apple TV 1st generation- can't seem to transfer rented Itune movies from my Mac to the Apple TV

You need to establish if it was 1080p or 720p HD you downloaded.
If it's 1080p it will not play at all on AppleTV1 - the hardware is not powerful enough to decode 1080p h264 (or 720p above 25fps). When AppleTv1 came out most items were SD only and with time more 720p HD stuff became available. 1080p content cm after AppleTV 1 and 2 were replaced by AppleTV 3.
AppleTV2 can process but not display 1080p - it is stuck to 720p output.
AppleTV1 could only process 720p max, but could always upscale on output to 1080p!
Your iTunes Preference should determine what quality you are downloading/renting.
AC

HT201570 Looking for a MSDS for a Ipod Nano 7th generation can anybody help?

Looking for a MSDS for a Ipod Nano 7th generation can anybody help?

Here, at the end of the site, you can find some environment specs from ipod nano 7th generation... hope this few informations could help you
http://www.apple.com/ipod-nano/specs.html

ActionScript generation - Can it ignore ActionScript keywords in 4.0.1?

Similar Messages

Maybe you are looking for