Activate Business Content PP

Dear all,
We want to activate the Business Contents for extraction of the SAP module PP. For example we have already activated DataSource 2LIS_04_P_COMP and so on. Right now we are unsure which RMBW-programs and additional jobs have to be activated. Does anybody have a guideline something like this to install these Business Contents fore using PP-extraction?
Thank at all.
Best regards
Daniel

HI Daniel, try to find your PP scenario in:
[ Best Practices: SAP NetWeaver Business Warehousing - Scenarios|http://help.sap.com/bp_bw370/html/bw.htm]

Similar Messages

BI 7 Activate Business Content Best Practice?

Guru,
Could you share your experience on how to activate business content in BI 7. In 3.x, I used to activate business content based on infosource then crate ods and infocube based on in infosource. Now in BI 7 infosource is no longer necessary. Please share your thoughts of best practice on activate business content in BI 7.
Thanks,
John
Message was edited by:
John Do

Hi,
To actiavte the objects in the BI content u can select which ever object u want and then select the collection mode as all the objects before and after....
this will ideally activate all the objects that are required for the functionin of the object that you have selected .......
In simpler way....
RSA1-> Business Contents-> Select your objects-> On the right hand side, select "automatic collection" under "collection mode" and Select "before and after data flow" -> Right Click the selected objects on the left hand side and right click -> Insert Objects for collection-> Once the selected objects comes to the right hand side, select "install" and click "install in background".
See this also....
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
Hope it helps,
Happy Life,
Aravind

I Activate business content data source, but ca't able to see the data in

I activate business content data source in crm 2007 , when i go to RSA3, GIVE the data source and checking data, I can not able to find the data in that ,
q1) when activating the data souce then it have data i, OR we will run any sttings for that

Thanks for reply
I did same thing , I activated the data source in RSA5, then got to RSA3 i can not able to fine data in that data source,
is there is no data in tables?
or any other problem

Activate Business content - "In dataflow afterwards" or "Only necessary" ?

Hello experts,
I would like to activate the business content for 0FI_GL_1 infosource. I am not sure which method to follow. Can you please advice?
Method 1
AWB --> Business Content --> From the left most frame Clicked on "Object types"
In the right most (3rd) frame set the grouping to "In dataflow afterwards"
In the second frame expanded the "Info sources" and clicked on "Select objects"
In the popup window, searched for "0FI_GL_1" and clicked on "Transfer Datasource"
And then choose "Install" from the right most frame
It activated lot of unnecessary stuff like Infosets, Multi Provider etc
Method 2
AWB --> Business Content --> From the left most frame Clicked on "Object types"
In the right most (3rd) frame set the grouping to "Only necessary objects"
In the second frame expanded the "Info sources" and clicked on "Select objects"
In the popup window, searched for "0FI_GL_1" and clicked on "Transfer Datasource"
And then choose "Install" from the right most frame
Repeat the above steps for the all (Infocube, ODS, update rule, transfer rule)
Thanks in advance
Sri

Hi,
Installing the BC is depends upon your requirement.Please see the folowing information regarding BC installment.
In Data Flow Before
If your start point is an InfoCube, all those objects that are in the data flow before the InfoCube, and are therefore necessary for providing data to the InfoCube, are collected. This includes, for example, update rules and InfoSources. So that these objects can be activated, all the corresponding objects required for these objects have to be collected in addition. For activating an InfoSource, InfoObjects may also be necessary which are not contained in the InfoCube and have therefore not yet been collected. However, for these additional objects, the objects that come before them in the data flow are not collected.
In Data Flow Afterwards
For example, if your start point is an InfoCube, all those objects that are in the data flow after the InfoCube, and are therefore reporting objects that serve to display the data stored in the InfoCube, are collected. This includes, for example, queries and Web templates. So that these objects can be activated, all the corresponding objects required for these objects have to be collected in addition. For activating a role, additional workbooks that are based on other InfoCubes may also be necessary. However, for these additional objects, the objects that come after them in the data flow are not collected. These additional workbooks cannot be used for reporting unless they are transferred from the Business Content by some other means.

In Data Flow Before and Afterwards
For example, when using an InfoCube, the objects necessary for activating the InfoCube are collected together with other objects that are required for activating those objects collected as well. This includes objects positioned both before and after the InfoCube in the data flow.
With the InfoCube, all incoming data streams and the evaluation string are activated. Both are then completed with data streams, enabling a complete evaluation in the workbooks.
Collection Mode
Collect Automatically (default setting): The data is collected directly when the objects are selected.
Start Manual Collection: The data is collected only when you click on the Gather Dependent Objects icon.
Set the collection mode to Start Manual Collection. You can then select all objects without having to wait.
Thanks
Reddy
Message was edited by: Reddy

Steps to activate Business Content

Hi,
Plese tell me the steps to activate BI content in SAP NetWeaver 7.0

Hello,
Please search the forum before posting the thread, kindly go through the following document for detailed steps....
http://help.sap.com/saphelp_bw30b/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
Thanks,
Pavan.

How to activate business content extractor for masterdata in ECC 6.0?

Hi Experts,
I have a small problem with the extracttor 0PS_RESPNO_TEXT in ECC 6.0?
If i try to open it in RSA2 / RSA6, it says that active version not available. When i check in the developement system, i have it as modified version.
For this problem, I hope activating this in Development and transporting to Prodction should fix.
As far as i know, activation of sap delivered extractors can be done through SBIW or RSA5. But i have not done this before.
Can anybody please help me with step by step procedure to activate this and also what are the precautions and checks that need to be preformed?
Thanks & Regards,
Asrar Ahamed MA

It depends on which BW environment has an RFC connection to the ECC environment you're activating the DataSource in. Typically, environments are paired, similar (but not always) like the depiction below:
ECC Development <-> BW Development
ECC QA <-> BW QA
ECC Production <-> BW Production
Best Practices suggest that a DataSource be activated and put on a transport in the ECC Development environment. Upon activation of the DataSource in ECC Development, replication of the DataSource in the BW Development environment can take place and Best Practices suggest putting the DataSource on a transport in BW. As the ECC transport is promoted throughout the ECC landscape, the BW transport is promoted throughout the BW landscape in order to keep them in sync.
So, if the envrionment that you've just activated the DataSource has an RFC connection to your BW Production environment, you can replicate in BW Production and if that's your standard practice, then that's the way your should do it. It's typically, however, not considered a Best Practice to be able to create, update or delete in a production environment.

How to activate business content for 0TCA_DS01

I need to set up authorizations in netweaver BI using the following objects:
0tca_ds01
0tca_ds02
0tca_ds03
0tca_ds04
0tca_ds05
I've looked at trxn RSA5 in our HR system, but I'm not able to identify the datasources that feed the 0tca_ds0* objects. What are the HR datasources for these objects?
Thanks,
Den

I put my thoughts in here..
For any Analysis authorizations (HR & CO) currently available -prerequisite is extractor available in R/3.
To my knowledge the only available extractors for HR are
0HR_PA_2 HR Structural Authorizations- Values
0HR_PA_3 HR Structural Authorizations - Hierarchies
and the relative DSO for aforementioned DS are -
0PA_DS02 and 0PA_DS03.
I would like SAP to answer the same.
CO -
the datasource available is 0CO_OM_CCA_USER1.
A complete scenario is available. Transfer the content objects: 0CO_OM_CCA_USER1 (DataSource and InfoSource), as well as the DataStore objects including update rules 0CCA_001, 0CCA_002, 0CCA_003.
Hope it Helps
Chetan
@CP..

Activate BI Business Content in production system

Hi experts
I have a doubt, someone activated business content in production system, what are the consecuences in the future?
Are there any procedure to follow to activate business content from developement system and then to transport to QAS and PRS?
Edited by: José Jaramillo Padrón on Dec 15, 2008 11:32 PM

Hi
what are the consecuences in the future?
Yes Its not advisable to activate the Business Content in Production server, because all the final Reporting Data will be fetched for the users from the same Production server and we should keep the system ready and available for all the time for the data loading and reporting.
If you are engaging the the system in activating the BC (hope you know that BC activation takes time and while activating it will lock all the dependent objects involved in it)
Are there any procedure to follow to activate business content from developement system and then to transport to QAS and PRS?
BC should be activated from Dev then Transport it to Quality testing activities user acceptance then transport finally to PRS.
Hope you know the steps for activating BC or else http://help.sap.com/saphelp_bw31/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
Hope it helps

Error while activating Business Content

Hi!
I'm trying to activating a BC ODS.. but when I run the installation simulation I get the following error message:
"InfoObject 0KN_USE is not available in version A"
I've marked the infoobject 0KN_USE to be installed..
Any ideas of how to proceed?
BR
Bjørn

Maybe that infoobject existed before in inactive version, check it and activate manually, after that activate business content version

Error InfoObject inactive while activation of Business content for cube

I am facing error "InfoObject 0COMP_CODE is not available in active version" while simulate installation of business content of cube 0FIGL_C10. Please guide me for the same.
Edited by: Nilesh Vakil on Jul 15, 2010 1:07 PM

Hi Sriniva and All,
I have been trying to activate business content- info objects catalogue, and have been gettin the below errors. I have activated ocomp-code and checked it with transaction sm37, and it says the job has finished.But i am not sure if i have to activate all the info objects thereof one by one.
EDI: Partner profile not available 1
Source system E33CLNT003: No authorization for remote activation of DataSources
Source system T90CLNT090 is inactive
Object '0CUSTOMER_ATTR BM_GIS_DAT' (ISMP) of type 'Transfer
Rules' is not a
I hope to hearing from someone soon !
-- Armstrong Kwakye

Business Content Questions - Urgent

Can you please help me with the following questions...
1. I installed business content for CRM Sales Activities. I was also successful in loading transaction data. There is some master data that also needs to be loaded, but many of the master data datasources are not available when I checked RSA5 in the CRM system. How should I approach this problem?
   2. When installing business content, if "match (X) or copy" is selected and if we select background installation, will the system overwrite the objects or will it leave it in the existing version?
   3. When activating business content reports, I get the error "BEx transport request xx is not suitable or not available". What could this mean?
   4. After development, do I simply gather all the objects and transport them to QA/PRD or do I have to activate business content in QA/PRD systems also?
Thank You.

Hi,
1.The datasources are:
Opportunity - 0CRM_OPPT_H - Opportunities header
0CRM_OPPT_I - Opportunities Items
Activities - 0CRM_SALES_ACT_1 - Activities
Master data -
0CRM_OPPT_CYCLE_TEXT
0CRM_OPPT_PHASE_TEXT
0CRM_OPPT_TYPE_TEXT
Business Partner
0CRM_BPART_ATTR
0CRM_BPART_TEXT
Products
0CRM_PRODSL_ATTR
0CRM_PROD_ATTR
0CRM_PROD_HIER
0CRM_PROD_IDCMP_TEXT
0CRM_PROD_TEXT
0CRM_PROD_TYPE_TEXT
This is not complete list.
2.Please chk this links:
Re: Confused on Install Business Content
http://help.sap.com/saphelp_sem40bw/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/content.htm
Re: Match (or) Copy
About Match(X) or Copy in BC
http://help.sap.com/saphelp_bw33/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
3.Try to get the authorizations if you are transporting from dev to quality or dev to prod.
pls chk whether you stored in $tmp package.
4. yes,you can transport from development ---> Quality --.>production system for the activated business content objects .
Regards
CSM Reddy

Active transactional datasources not listed in business content collection

Dear experts,
for SRM bidding engine i have activated the extractors in SRM through transaction RSA5 and put them on a transport. Replicated them in BW and their they are appearing correctly, activated them and provided infopackages.
Now when i want to activate Business Content SRM role SAP_BW_SRM_ACT_BE and after grouping look for the transactional datasources, they are not listed in the list of objects (grouped 'before and after', collection 'automatic').
1.Is this normal and do i need to make the links between datasources and infosouces myself after activating the role?
2.or does it normally installs the entire flow correctly?
Also weird - my datasources are BI7.0 and some of my BW SRM content is from older 3.x version, containng infosources and communications structures. Can this be the reason why Business Content grouping does not find the datasources?
Regards,
Steven

Hi,
looked at the note but did not provide more info as i already applied what is written in the note.
This role for bidding engine after I have put it into the collective window, among the other objects it will activate it does not list the datasources of the transactional data, nor the links to the infosources.
Installing it like this will require me to connect the datasources manually to the dataflow, which i want to avoid.
Is there a way to make BW connect the transactional datasources of SRM Bidding Engine connect automatically with the business content BW flow of Bidding Engine? this i though would be done by collecting it (before and after), grouping (automatically).
Regards,
steven

Business content activation in BI 7

Hi - We are on BI 7 and trying to activate business content. When I try to install an
infocube with dataflow "Before and After" ie including infosource and datasources
I get this message....
"On the following screen, logon with your user so that the
system can check whether you are authorized in BW to
transfer DataSources into the source system from the Content"
is this a new feature in BI 7 to activate R/3 datasources from BW ?
I know the old way...
1. Frist activate R/3 datasource
2. Replicate the metadata in BW
3. Then activate business content.
will the new feature in 7 do the first two steps from BW side ?
In your projects did you use this new feature and how is it
working with you ?
Pls point to any material to read about his new feature
Thanks.

Sabrina,
When you select "Before and After" you include also the "Source System" objects portion.
Just make sure you uncheck whatever objects are below the "Source System" subtree. Then you should be fine since only the BI objects will be checked.
Hope this helps.
Regards,
Luis

BI 7.0 Installing Business Content

Can anyone tell me the steps that are required to activate business content in BI 7.0?
Thank You

Hi SRX,
If you use only the ABAP components of an SAP NetWeaver stack, you should use the standard process to implement, configure and activate BI content. For more information, see http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm ® Data Warehousing ® Data Warehouse Management ® Business Content (Versions).
1. You download and update SAP Solution Manager content.
2. In SAP Solution Manager, you select your business scenario.
3. In SAP Solution Manager, you adapt your business scenario.
4. In the software lifecycle manager (part of usage type AS Java), you check your IT landscape for required products.
5. In the software lifecycle manager, you check your IT landscape for required content software components.
6. In the Administrator Workbench (part of usage type BI) or Portal Content Studio (part of usage type EP), you install any missing business content shipment units.
7. In SAP Solution Manager, you generate a configuration task list.
8. In the Administrator Workbench or Portal Content Studio, you configure content objects.
9. In the Administrator Workbench or Portal Content Studio, you activate selected content objects.
10. You test and transport your changes.
Rgs,
Antonino

How to remove Business content objects that are not required?

Hi all of you,
I had extracted some of the objects from business content from FI such as General LEdger and Asset Accounting. After extracting it, my c drive is full and I am not able to open any other file. So I want to remove these FI objects that I had extracted from Business Content. Can any one please guide as to how should I remove these already loaded Business content objects?
Thank you.
TR.

Hi,
You can right click on the objects (unused) and delete.
actually when you activate business content its version is changes from "D" Delivered to "A" Active but these objects will always be available as D version to you. Even if you delete the activated objects now & need those in future you can reactivate them.
hope it helps
Regards
Vikash

Activate Business Content PP

Similar Messages

Maybe you are looking for