Activate plugins for all users on a web-site

Hello,
Is there a way to activate or whitelist plugins for a specific web-site, for all users on a Windows computer? Each time a user logs in and visits the site, they have to click three prompts to enable content. Aside from being annoying, most folks aren't that tech-savvy to understand what is going on and that they need to do it. All they want is for their content to run in the browser.
Thanks

There are plugin.state prefs for each plugin.
*plugin.state (0:Never Activate; 1:Ask to Activate; 2:Always Activate)
You can use a mozilla.cfg file in the Firefox program folder to lock prefs or specify new (default) values.
Place a local-settings.js file in the defaults\pref folder where also the channel-prefs.js file is located to specify using mozilla.cfg.
pref("general.config.filename", "mozilla.cfg");
pref("general.config.obscure_value", 0);
These functions can be used in the mozilla.cfg file:
defaultPref(); // set new default value
pref(); // set pref, allow changes in current session
lockPref(); // lock pref, disallow changes
See:
*http://kb.mozillazine.org/Locking_preferences
*http://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/
*http://mike.kaply.com/2014/01/08/can-firefox-do-this/

Similar Messages

  • How can I install and activate extensions for all users

    Hi, within the version 7.0.1 I am able to install noscript extension for example for all users.
    With version 8.0 the extensions are disabled by default, so I do not install it on company computers.
    How can I manage extensions and settings for all users in 9.0?
    Best regards
    Jens

    Hi John,
    I appreciate your prompt response.
    We have an Australian client here in the Philippines and would want to purchase an adobe software under Creative Cloud Licensing.
    Since this type of licensing is not yet available here in the Philippines, they are suggesting that they can purchase it in their country.
    My main concern is, will there be any conflict upon installing/activating an adobe software under Creative Cloud which will be purchased from their country?
    And what are the steps for installing and activating a software under this type of license.

  • CP3525dn, networked -- default duplex for all users (embedded web server)

    I want to set the default for all users on our networked CP3525dn to be duplex. I cannot find this option anywhere in the embedded web server. I have duplex turned on, of course, and users can set their own default to duplex, but I want it to be default for everyone--the default default, if you will.
    Is this possible? I'm fairly certain it's possible if the printer is connected to a computer and shared on the network (but I don't remember the specifics) but I can't find out how to do it if it's on the network on its own.
    Thanks!

    I don't believe you can.  It must be set for every user manually.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • How to install plugin globaly (for all users) in Firefox13?

    How to install plugin globaly (for all users) in Firefox13?

    See also:
    *https://developer.mozilla.org/en/Gecko_Plugin_API_Reference/Plug-in_Development_Overview#Installing_Plug-ins

  • How to block for data sync between web cloud and each PC.I want control for all user's pc as administrator.

    I already blocked as below url.
    Sync/Store/Share Core Creative Cloud
    https://creative.adobe.com/api/assets
    https://creative.adobe.com/api/collections
    hptts://creative.adobe.com/api/share
    But one of user create file on C:\Users\Administrator\Creative Cloud Files it is sync with web cloud and another pc.
    I saw  sync on or off function in set up tap.
    but I want block sync for all users as administrator.

    Moving the discussion to File Hosting, Syncing, and Collaboration.
    Thanks,
    Atul Saini

  • Activate Accessibility Features for all users?

    Is there a way to activate Accessibility Features for all users by editing a table on the Portal side?
    EP6 SP2 and NW04S.
    Thanks
    Jean Seguin

    Hi Jean,
    not that I would know of. But you can easily write a small portal component which sets the accessibility level of all users to your preferred level.
    The code snippet below should give you an idea of what I mean
    IUserFactory userFactory = UMFactory.getUserFactory();
    IUserSearchFilter filter = userFactoy.getUserSearchFilter();
    ISearchResult result = userFactory.searchUsers(filter);
    while (result.hasNext()){
      String userId = (String)result.next();
      IUserMaint user = userFactory.getMutableUser(userId);
      user.setAccessibilityLevel(IUser.SCREENREADER_ACCESSIBILITY_LEVEL);
      user.commit();
    Best regards,
    Martin

  • Setting Crystalviewer for all users in CMC

    I am trying to setup Crystal Reports server 2008 VI for my organization. One of the requirement is to disable the Preferences in inoview and set the crystal report viewer to the Web ActiveX control for all users. I was able to disable the preference parameter in CMC -> Allications -> InfoView, but could not find away to set the default viewer for all InfoView users to the activeX control? Is this doable? If so I would like to know how.
    Any help is greatly appreciated.

    Enable preferences and go to Infoview, click oh Preferences and change the view format to ActiveX and save it. Do this for Administrator users.
    There is download available, using that you can make the same change for all users, check the below link.
    Re: Setting the same "InfoView Start Page" to all users in one group
    With that you can change the settings for all users as Administrator, once done remove the access to Preferences.
    Thanks,
    Hari

  • One Library for all users on the system - Sharing?

    Hello.
    I'm using iTunes 9.0.3 on OS X 10.6.2. On this system, there are TWO users, one for my wife, one for me. I'd like to "merge" the seperate iTunes libraries, so that there's only one shared library for all users.
    How could this be achieved?
    Searching the web, I found a writeup on [dougscripts.com by Paul Whitey|http://dougscripts.com/itunes/itinfo/sharedlib.php], which basically explains to move ~/Music/iTunes to /Users/Shared/iTunes and making sure that there's an alias in ~/Music pointing to /Users/Shared/iTunes. It also explains, that the ownership of the files & folders is to be changed so, that all users have read & write access. This then looks like this on my system:
    !http://img214.imageshack.us/img214/6223/fileinfowithbothusersha.png!
    -> http://yfrog.com/5yfileinfowithbothusershap
    It works good - both "alex" and "sandra" can work with these files (ie. move them, rename them, change ID3 tags).
    But see those:
    !http://img714.imageshack.us/img714/2183/fileinfowithonlyalexhav.png! !http://img686.imageshack.us/img686/7807/fileinfowithonlysandra4.png!
    --> http://yfrog.com/jufileinfowithonlyalexhavp & http://yfrog.com/j2fileinfowithonlysandra4p
    That's from files which sandra or alex have added later on. Only the one who added these files can modify them (which is of course correct, if you have a look at the file permissions).
    How would you go about having only ONE iTunes database on the system? Simply putting the iTunes Db on a shared folder doesn't work well, as can be seen above. Always having to fiddle around with the file permissions isn't exactly comfortable…
    Any suggestions?
    Thanks,
    Alex

    Hm. PowerTunes crashs, when I make it Share my library. I pasted the crash report at http://pbox.ca/13gwy
    Since I cannot know how/if would work (because of the crash…), please correct me if I'm wrong, but wouldn't it also just move the files to /Users/Shared and set permissions correctly? Wouldn't I need to keep on running PowerTunes from time to time, or is it "run once and forget" application (if it works)?

  • Setting Default Preferences for All Users in Crystal Reports Server 2008 v1

    We are currently looking to set the default preferences in the CMC for all of our users.
    I did locate this page Link: [How to set default preferences for all users in Infoview 3.1/CRS 2008]
    The first part of the thread did seem promising but I am unable to find the sample .jsp code that people recommended.
    I would assume that this scenario is common enough that someone knows a way to set universal preference defaults.
    Thank you

    I thought I could just run it too but when I attempt to I get a Windows Script Host error:
    Script: C:\User Prefs.vbs
    Line: 1
    Char: 1
    Error: Expected statement
    Code: 800A0400
    Source: Microsoft VBScript compilation error.
    I noticed the first most line seems to be markup for a web interface though I am not familiar with vbs so I may be wrong.  I used the publishing wizard to put the script on the CMC to attempt to run it through the CMC but it still does not work.

  • Saving Settings for all Users

    Hi,
    I am searching for a Solution, how to save WD ALV View using Settings globally, which means, that
    this Setting is valid for all Users and not User dependent.
    In GUI ALV we set it as Example /TEST and after Saving it, it will be valid for all Users.
    How to Code it? Please give Example. Thanks!
    Best regards
    Beserithan Malabakan

    Hello,
    Do the following:
    In the se80 choose you web dynpro application and the go to the menu Web Dynpro Application->Test->Execute in Administration Mode, now all changes that you do in the configuration will be saved for all users (if when saving you select the Assignment = All ).
    Regards.

  • Permanent Regional Formatting, Save for all users, Remove Document Security

    Dear Experts,
    I have read the Documentation of Permanent Regional Formatting, Save for all users, Remove Document Security in Document Properties.
    Can anyone explain me in simple way all the above three. (More on Permanent Regional Formatting with example).
    Regards
    Sam

    There's no unmanaged Web Intelligence functionality support via .NET as far as I know.
    You might want to open a support case with SAP to get confirmation.
    Sincerely,
    Ted Ueda

  • Move the Cache files for all user in the domain, which work with the PC

    Is there a possibility to chance the Cache file for all User.
    If i logon with a new user the Cache is written automatically in Proflie of the user.
    can configure to Java in such a way that with announce a user the Cache file get automatically moved to c:\temp.
    Thanks for your help

    oh, too bad, it is part of the requirement-we need to do it automatically through web.
    Any easier method to change the client machine deployment.properties through web?
    Need to deploy the application to thousands PC and the PC configuration may be different one by one.
    oldguy

  • Remove Following people from mysite for all users

    [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.Office.Server")
    $web = Get-SPWeb https://www.contoso.com/teams/yourteam
    $context = [Microsoft.SharePoint.SPServiceContext]::GetContext([Microsoft.SharePoint.SPSite]$web.Site)
    $upm = New-Object Microsoft.Office.Server.UserProfiles.UserProfileManager $context
    $users = $web.AssociatedMemberGroup.Users | where IsDomainGroup -eq $false
    $useraccounts = $users | select loginname | Foreach {"$($_.loginname)"}
    foreach ($user in $users) {
    $profile = $upm.GetUserProfile($user.UserLogin)
    #$objectToFollowRelativeToWeb = "/"
    if ($profile)
    #Create a Social Manager profile
    #SPSocialFollowingManager
    $followManager = New-Object Microsoft.Office.Server.Social.SPSocialFollowingManager($profile, $context)
    $following = $followManager.GetFollowed([Microsoft.Office.Server.Social.SPSocialActorTypes]::Users)
    for ($i=$following.Count - 1; $i -ge 0; $i--) {
    $followed = $following[$i]
    $acctname = $followed.AccountName
    #if claims:
    $acctname = 'i:0#.w|'+$acctname
    if ($acctname -iin $useraccounts ) {
    [Microsoft.Office.Server.Social.SPSocialFollowResult]$res = $followManager.StopFollowing($followed)
    Write-Verbose "$($user.UserLogin) stop following $acctname result is $res"
    I have the above script from one of the technet solution to remove followeronly  for Contributors from MySite. I want this script to run for all user and remove all existing association. Can someone help me update this script.
    Thanks Ba$va

    Hi Basva,
    According to your description, my understanding is that you want to remove all existing association for all users
    The $users = $web.AssociatedMemberGroup.Users | where IsDomainGroup -eq $false is to get all users in Contributors group. You can change the line to
    $users = $web.AllUsers, then run the script, compare the result.
    Here is an post for getting all users using PowerShell, please take a look at:
    http://www.sharepoint2013.me/Blog/Post/160/Get-all-the-unique-users-in-a-farm-using-PowerShell-script
    Best Regards,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • Single Webstart install for all users on a PC?

    Is it possible to do a single install of a Web Start application for all users on a Windows PC? Currently, it appears that each user would have to do the installation.

    I have the same requirement as mikemil. I have read the documentation as dietz333 suggested!
    What have I done:
    - created all the required server side stuff for JNLP
    - created the client side properties.config file referencing the server side system deplyoment.properties via a url
    - this server side deployment.properties contains the property:
    deployment.system.cachedir=c:\\temp\\ws-system-cache
    With that I can do on a client:
    javaws -system <my-jnlp-url>
    All works as expected. Everything gets downloaded and cached in the specified c:\temp\ws-system-cache!
    When I try to "start" <my-jnlp-url> from a browser (ie) it will be stored within the user cache! So, I have to change file association for the JNLPFile type to contain the "-system" option. With that it also works with links in the browser.
    My questions/comments:
    - this requires "some" administrative effort on the client side. Is there a less administrative solution?
    - since there is only a "system" specific location for the deployment.config all Java WS applications ever started will go into this system cache. Wright?

  • Retrieving user detail, group name for all users

    Hi,
    How can I retrieve User name, email, authentication, user group name
    for all users using SDK.
    It is possible to create this report in webi or CR?
    Thank you for reply,
    Gregor

    Use the following code to retrieve this information:
    IInfoObjects users = oInfoStore.query("select * from ci_systemobjects where si_kind='user'");
    for (int i=0; i<users.size(); i++)
             IUser user = (IUser)users.get(i);
             // user.getTitle(); for user name
             // user.getFullName(); for user's full name
             //  user.getEmailAddress(); for user's email address
             //  for authentication type:
             IUserAliases alises = user.getAliases();
             for(int j=0; j<aliases.size();j++)
                       IUserAlias alias = alises.get(j);
                       // alias.getAuthentication() for authentication associated with this alias, since same user can have more than 1 authentication. e.g. Enterprise and Ldap.
             // for user group memberships:
             java.util.Set groups = user.getGroups();        
             // the groups Set object will contain SI_ID of all the user groups that this uses is member of. You need to query by the SI_ID of the usergroup to get the group names.
    //  e.g.
    //    oInfoStore.query("select si_id, si_name from ci_systemobjects where si_kind='usergroup' and si_id in (a,b,c....)");
    where a,b,c are the SI_IDs of the usergroups.
    To create a report based on the above fetched data, there are several methods such as:
    you can use Java resultset where in you create the report structure in designer and push the data at runtime using java result set objects. Another way is to push this info in Excel or Access and design your report based on that excel\access.

Maybe you are looking for