Activating BIS service in china! Help!

I am hoping someone can fill me in with the general info needed to activate BIS service.
I just moved to shanghai and went to get my BB activated with a service plan. I was told to get a sim with a data plan first then sign up the BIS service online. I did what I was told but after 3 hours (that's how long they said it would take to work), it wasn't activated with BIS. I called CS. They said they already did what they were supposed to do, which was to activate APN. The only reason they could think of was that my IMSI# wasn't provided to the BIS group. Long story short, I got the ImSI, called BIS group and provided the info. After they fiddle around with it, they said it should work...obviously, it doesn't! They asked me to call CS again to double check if ApN was activated and it is.
Now they are investigating as to why it isn't working. I don't think thy have the slightest idea why it doesn't. I want to use my BB so if you guys have any suggestion, I would greatly appreciate it!
A little additional info: my BB worked when I was in hong kong. I manually input the APN setting in my berry. I also tried to register the Host Routing Table and it's still empty.

shogun308 wrote:
My unit is not being sold in china at the moment. I will worry about that later once I can get on BIS.
That's actually my point. If the carrier does not directly support the specific model number of BB, then their system may not deliver to the BB the required Service Books in order for BIS to function. I have no way to know if your new carrier falls into this category or not.
shogun308 wrote:
I used a PayGo plan while I was in hong kong. last I checked in hong kong, BIS wasn't active since I only purchased 1 mth of BIS service. However, the sim card/account still had credits on it so I could make phone calls. Would that be a problem? If so, how do I unregister it? Is this something I could do personally via RIM website or RIM tech support? Or is it something china Unicom can handle.
If this is causal (I cannot know for sure), then the place to accomplish the un-registring is the carrier that has it registered. RIM can do nothing since the carrier controls their own systems.
Before proceeding, please try this, with your new carriers SIM installed in the BB, and please first test that you can correctly use all of your voice-level services before doing the below steps:
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for an "Activation" or "Registration" message to arrive on your BB...there should be just one.
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for one "activation" message for each configured email account (if any) to arrive on your BB.
If there are Service Books left over from your prior carrier, you may have to manually delete them. Sorry, I can't guide you in any greater detail as I've no idea what their SB's might look like...but, if you delete all SB's, then resending them should generate new and proper SBs from your new carrier.
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

BIS service in China

Does anyone know when BIS service will be available in China through China Mobile?
BES service has been available for some time now, and recently there was news about RIM and China Mobile preparing to start offering BIS service.
Thanks,

Does anyone know when BIS service will be available in China through China Mobile?
BES service has been available for some time now, and recently there was news about RIM and China Mobile preparing to start offering BIS service.
Thanks,

Can not active mail service in iCloud pannel

I have a old @me.com account, but non active. after I have transfered my appleID to icloud, I cannot active mail service, anyone can help me? thanks a lot!

iphone 4 ios 7.2.1

IPhone 4s not being recognized and cannot be activated for service--what does this mean? I can't sync with iTunes. Please help

iPhone not being recognized and cannot be activated for service--what does this mean? I can't sync with iTunes. Please help.
When I connect iPhone to USB iTunes is giving me the above message. Please advise if you know the fix.
Thanks,
Lina1116

did you find a fix?

Storage Integration with Active Directory Services Part 2

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
Having your storage device join Active Directory Services can be relatively straightforward. What do do if the JOIN button fails? This demo goes through a basic checklist from network to server. Demo covers integration between the NSS2000/3000/4000/6000 platform and Microsoft ADS Server 2003.
Part 1 - Network Overview
Part 2 - NSS Configuration
Part 3 - Connecting a share
Part 4 - Server 2003 Administration
Note: Some artistic license was used to make the test environment more easy to illustrate but the principles are the same in a live network.

Hi Angus,
Policy Server does not require a specific LDAP schema. During configuration you simply map the LDAP attributes of your schema to the ones that Policy Server supports (e.g., common name, email address, etc).
If you are configuring Policy Server to use an LDAP, it will use the LDAP to authenticate the user (Policy Server does not store the password itself in this case).
If passwords are stored outside of the LDAP (e.g., in a database), it is possible to write a custom authentication provider to authenticate against this source.
Hope this helps,
-Bill

Storage Integration with Active Directory Services Part 4

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
Having your storage device join Active Directory Services can be relatively straightforward. What do do if the JOIN button fails? This demo goes through a basic checklist from network to server. Demo covers integration between the NSS2000/3000/4000/6000 platform and Microsoft ADS Server 2003.
Part 1 - Network Overview
Part 2 - NSS Configuration
Part 3 - Connecting a share
Part 4 - Server 2003 Administration
Note: Some artistic license was used to make the test environment more easy to illustrate but the principles are the same in a live network.

Hi Angus,
Policy Server does not require a specific LDAP schema. During configuration you simply map the LDAP attributes of your schema to the ones that Policy Server supports (e.g., common name, email address, etc).
If you are configuring Policy Server to use an LDAP, it will use the LDAP to authenticate the user (Policy Server does not store the password itself in this case).
If passwords are stored outside of the LDAP (e.g., in a database), it is possible to write a custom authentication provider to authenticate against this source.
Hope this helps,
-Bill

Active Directory Services Can't Connect to Domain

I removed Active Directory services form a server running 2012. I then went to reinstall and reconfigure it, but I keep running into issues. When I launch active directory admin center it gives me an error that it can't connect to any domain, and I can't
make any changes. The local server has already been promoted to the domain controller. Here is the output from dcdiag:
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = ACSSVR
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\ACSSVR
Starting test: Connectivity
......................... ACSSVR passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\ACSSVR
Starting test: Advertising
Fatal Error:DsGetDcName (ACSSVR) call failed, error 1355
The Locator could not find the server.
......................... ACSSVR failed test Advertising
Starting test: FrsEvent
......................... ACSSVR passed test FrsEvent
Starting test: DFSREvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... ACSSVR failed test DFSREvent
Starting test: SysVolCheck
......................... ACSSVR passed test SysVolCheck
Starting test: KccEvent
A warning event occurred. EventID: 0x80000B46
Time Generated: 03/02/2015 12:00:00
Event String:
The security of this directory server can be significantly enhanced by configuring the server to reject SASL (Negotiate, Kerberos, NTLM, or Digest) LDAP binds that do not request signing (integrity verification)
and LDAP simple binds that are performed on a cleartext (non-SSL/TLS-encrypted) connection. Even if no clients are using such binds, configuring the server to reject them will improve the security of this server.
A warning event occurred. EventID: 0x80000734
Time Generated: 03/02/2015 12:00:37
Event String:
The local domain controller could not connect with the following domain controller hosting the following directory partition to resolve distinguished names.
......................... ACSSVR passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... ACSSVR passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... ACSSVR passed test MachineAccount
Starting test: NCSecDesc
......................... ACSSVR passed test NCSecDesc
Starting test: NetLogons
Unable to connect to the NETLOGON share! (\\ACSSVR\netlogon)
[ACSSVR] An net use or LsaPolicy operation failed with error 67,
The network name cannot be found..
......................... ACSSVR failed test NetLogons
Starting test: ObjectsReplicated
......................... ACSSVR passed test ObjectsReplicated
Starting test: Replications
......................... ACSSVR passed test Replications
Starting test: RidManager
......................... ACSSVR passed test RidManager
Starting test: Services
......................... ACSSVR passed test Services
Starting test: SystemLog
A warning event occurred. EventID: 0x000003F6
Time Generated: 03/02/2015 11:21:34
Event String:
Name resolution for the name teredo.ipv6.microsoft.com. timed out after none of the configured DNS servers responded.
A warning event occurred. EventID: 0x000727A5
Time Generated: 03/02/2015 11:21:58
Event String:
The WinRM service is not listening for WS-Management requests.
An error event occurred. EventID: 0xC0001B58
Time Generated: 03/02/2015 11:26:01
Event String:
The Vstor2 Virtual Storage Driver service failed to start due to the following error:
An error event occurred. EventID: 0xC0001B58
Time Generated: 03/02/2015 11:26:01
Event String:
The Vstor2 MntApi 2.0 Driver (shared) service failed to start due to the following error:
A warning event occurred. EventID: 0x000003F6
Time Generated: 03/02/2015 11:26:16
Event String:
Name resolution for the name teredo.ipv6.microsoft.com. timed out after none of the configured DNS servers responded.
An error event occurred. EventID: 0x0000002E
Time Generated: 03/02/2015 11:34:32
Event String:
The time service encountered an error and was forced to shut down. The error was: 0x80070700: An attempt was made to logon, but the network logon service was not started.
An error event occurred. EventID: 0xC0001B6F
Time Generated: 03/02/2015 11:34:32
Event String:
The Windows Time service terminated with the following error:
A warning event occurred. EventID: 0x000727A5
Time Generated: 03/02/2015 11:35:01
Event String:
The WinRM service is not listening for WS-Management requests.
A warning event occurred. EventID: 0x000003F6
Time Generated: 03/02/2015 11:39:08
Event String:
Name resolution for the name _ldap._tcp.dc._msdcs.ACS.local. timed out after none of the configured DNS servers responded.
An error event occurred. EventID: 0xC0001B58
Time Generated: 03/02/2015 11:39:27
Event String:
The Vstor2 Virtual Storage Driver service failed to start due to the following error:
An error event occurred. EventID: 0xC0001B58
Time Generated: 03/02/2015 11:39:27
Event String:
The Vstor2 MntApi 2.0 Driver (shared) service failed to start due to the following error:
A warning event occurred. EventID: 0x000727AA
Time Generated: 03/02/2015 11:39:40
Event String:
The WinRM service failed to create the following SPNs: WSMAN/ACSSVR.ACS.local; WSMAN/ACSSVR.
A warning event occurred. EventID: 0x0000000C
Time Generated: 03/02/2015 11:39:39
Event String:
Time Provider NtpClient: This machine is configured to use the domain hierarchy to determine its time source, but it is the AD PDC emulator for the domain at the root of the forest, so there is no machine above it in
the domain hierarchy to use as a time source. It is recommended that you either configure a reliable time service in the root domain, or manually configure the AD PDC to synchronize with an external time source. Otherwise, this machine will function as the
authoritative time source in the domain hierarchy. If an external time source is not configured or used for this computer, you may choose to disable the NtpClient.
A warning event occurred. EventID: 0xC000042B
Time Generated: 03/02/2015 11:42:01
Event String:
The RD Session Host server cannot register 'TERMSRV' Service Principal Name to be used for server authentication. The following error occured: The specified domain either does not exist or could not be contacted.
An error event occurred. EventID: 0x00000469
Time Generated: 03/02/2015 11:44:31
Event String:
The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain
controller and Group Policy has successfully processed. If you do not see a success message for several hours, then contact your administrator.
An error event occurred. EventID: 0x00000469
Time Generated: 03/02/2015 11:45:05
Event String:
The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain
controller and Group Policy has successfully processed. If you do not see a success message for several hours, then contact your administrator.
An error event occurred. EventID: 0x0000168F
Time Generated: 03/02/2015 11:55:22
Event String:
The dynamic deletion of the DNS record 'ACS.acsolutionsinc.net. 600 IN A 192.168.56.1' failed on the following DNS server:
A warning event occurred. EventID: 0x000003F6
Time Generated: 03/02/2015 11:55:22
Event String:
Name resolution for the name acsolutionsinc.net timed out after none of the configured DNS servers responded.
An error event occurred. EventID: 0x0000168F
Time Generated: 03/02/2015 11:55:47
Event String:
The dynamic deletion of the DNS record '_ldap._tcp.ACS.acsolutionsinc.net. 600 IN SRV 0 100 389 ACSSVR.ACS.acsolutionsinc.net.' failed on the following DNS server:
A warning event occurred. EventID: 0x000727A5
Time Generated: 03/02/2015 11:55:53
Event String:
The WinRM service is not listening for WS-Management requests.
A warning event occurred. EventID: 0x000003F6
Time Generated: 03/02/2015 11:55:53
Event String:
Name resolution for the name _ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.ACS.local. timed out after none of the configured DNS servers responded.
A warning event occurred. EventID: 0x000003F6
Time Generated: 03/02/2015 11:59:53
Event String:
Name resolution for the name _ldap._tcp.dc._msdcs.ACS.local. timed out after none of the configured DNS servers responded.
An error event occurred. EventID: 0xC0001B58
Time Generated: 03/02/2015 12:00:13
Event String:
The Vstor2 Virtual Storage Driver service failed to start due to the following error:
An error event occurred. EventID: 0xC0001B58
Time Generated: 03/02/2015 12:00:13
Event String:
The Vstor2 MntApi 2.0 Driver (shared) service failed to start due to the following error:
A warning event occurred. EventID: 0x000727AA
Time Generated: 03/02/2015 12:00:25
Event String:
The WinRM service failed to create the following SPNs: WSMAN/ACSSVR.ACS.local; WSMAN/ACSSVR.
A warning event occurred. EventID: 0x0000000C
Time Generated: 03/02/2015 12:00:25
Event String:
Time Provider NtpClient: This machine is configured to use the domain hierarchy to determine its time source, but it is the AD PDC emulator for the domain at the root of the forest, so there is no machine above it in
the domain hierarchy to use as a time source. It is recommended that you either configure a reliable time service in the root domain, or manually configure the AD PDC to synchronize with an external time source. Otherwise, this machine will function as the
authoritative time source in the domain hierarchy. If an external time source is not configured or used for this computer, you may choose to disable the NtpClient.
A warning event occurred. EventID: 0xC000042B
Time Generated: 03/02/2015 12:02:47
Event String:
The RD Session Host server cannot register 'TERMSRV' Service Principal Name to be used for server authentication. The following error occured: The specified domain either does not exist or could not be contacted.
An error event occurred. EventID: 0x00000469
Time Generated: 03/02/2015 12:05:17
Event String:
The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain
controller and Group Policy has successfully processed. If you do not see a success message for several hours, then contact your administrator.
An error event occurred. EventID: 0x00000469
Time Generated: 03/02/2015 12:05:17
Event String:
The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain
controller and Group Policy has successfully processed. If you do not see a success message for several hours, then contact your administrator.
......................... ACSSVR failed test SystemLog
Starting test: VerifyReferences
......................... ACSSVR passed test VerifyReferences
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : ACS
Starting test: CheckSDRefDom
......................... ACS passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ACS passed test CrossRefValidation
Running enterprise tests on : ACS.local
Starting test: LocatorCheck
Warning: DcGetDcName(GC_SERVER_REQUIRED) call failed, error 1355
A Global Catalog Server could not be located - All GC's are down.
Warning: DcGetDcName(TIME_SERVER) call failed, error 1355
A Time Server could not be located.
The server holding the PDC role is down.
Warning: DcGetDcName(GOOD_TIME_SERVER_PREFERRED) call failed, error
1355
A Good Time Server could not be located.
Warning: DcGetDcName(KDC_REQUIRED) call failed, error 1355
A KDC could not be located - All the KDCs are down.
......................... ACS.local failed test LocatorCheck
Starting test: Intersite
......................... ACS.local passed test Intersite
I've been trying to debug errors one at a time, but I'm having a hard time finding any information that pertains to this issue as a whole. Anything you can tell me about this would be great, thank you for reading.

It was the only server in the network, the only dc in the old forest. When I re-installed ad ds I gave the new forest different name, but I guess the old settings are still in the system somewhere conflicting with the new setup? Is there a way to
purge the old setup entirely and start over with ad ds, or am I going to have to re-install the whole OS? Thanks again for the help.
Honestly, the best way to handle this is to rebuild the server. There are many things that are "left behind" when you remove the Domain / Forest from a Domain Controller. In fact many articles will say after using ADMT (active directory migration
tool) you should decommission the original Domain Controller (aka reinstall the OS).
While you could spend more time trying to get that domain controller working, it absolutely is going to be 1) More reliable 2) faster to reinstall the OS on the old domain controller. If you are still leveraging storage, or services on that domain controller,
you will want to back them up, or have a transition plan before reinstalling everything on the server. I have a feeling if you choose to keep troubleshooting this, you will run into more issues down the road.
Entrepreneur, Strategic Technical Advisor, and Sr. Consulting Engineer - Strategic Services and Solutions Check out my book - Powershell 3.0 - WMI: http://amzn.to/1BnjOmo | Mastering PowerShell Coming in April 2015!

'Iphone may be damaged and cannot be activated for service'

Ive just bought a used iphone4. it arrived having been cleared and reset.
I connected to itunes and upgraded to the new software. Then it worked for half a day. Then a message came up saying i need ot restore the phone.
So i plugged it in again and at the end of the uprgrade sequence it comes up with-
'Problem with the iphone - may be damaged and cannot be activated for service' - please visit apple store.
Its obviously out of warranty and the apple store is a long way away. Ive only had it a day and im assured its never been jailbroken, dropped or water damaged.
I know loads of people have had this message come up and people have recommened going to the apple store. But before i make the long trek i just wanted to know if anyone ever came up with a solution to fix this and use the phone again.
Any help much appreciated. back on sh+tty blackberry!!

Thanks for the replies guys!
I cant access the phone it just stays on 'connect to itunes'
Could someone quickly explain how jailbraking an iphone could cause it problems? I want to email the person I bought this from and tell them why I think they have damaged it by jailbraking it.
I really appreciate this help bacuase ive shelled out £160 for this paperweight, Thanks.

Changes in Microsoft Active Directory Services into a file

I am in need of sample code to capture changes in Active Directory services into a flat file.
Here is my requirement:
I would like to capture user information changes from the Active directory server into a flat file.
For an example, When a user is newly created in Actives Directory Server, I need to Capture that user info and write into a flat file. Similarly for update and delete user in Activer Directory server, i need to capture the changes and write into a file.
Would appreciate, if any could help me on this
Thanks in advance
Thanks
Kumar

Refer to:
JNDI, Active Directory & Persistent Searches (part 1) http://forum.java.sun.com/thread.jspa?threadID=578338&tstart=200
There was another topic that I posted called JNDI, Active Directory and Persistent Searches (part 2) in which I described teh LDAPNotification Control.
It had the following URL http://forum.java.sun.com/thread.jspa?threadID=578342&tstart=200 however it seems as though I have suffered another case of the forum losing my posts.

I bought a iphone4 in US. Why my phone card have not service in China

I bought a iphone4 in US. Why my phone card have not service in China
I wil working long time in China. But My iphone4 have this issues
pls help me. THX

You will have to call them.
Here are the requirements for having it unlocked:
http://www.att.com/esupport/article.jsp?sid=KB414532&cv=820#fbid=I-Y-ki2QaEy
If you don't meet them I wouldn't bother to call.

Implementing active data service proxy for MySQL database

Hi,
I am referring "Oracle Fusion Developer Guide - Building rich Internet Application..." to implement Active data Service to update Af:Table for any change in the MySQL database.
The book discusses of a class which extends ADS "BaseActiveDataModel" which should handle starting and stopping of active listener and listener registration.
1. Does this class is sufficient to detect changes coming from MySQL database or is it specific to Oracle database?
2. Also the book does not discuss about the code for starting stopping or registering active listeners. Can someone guide me to some reference material or to a right place which explains me what kind of code does these methods require?
3. Also I wonder if anyone knows, if we can differentiate between events generated from different database tables. (I guess we need to do that by using 'instanceof' operator and comparing ViewObjects from my project).
(Just trying to develop my understanding around various ADF concepts.)
Thanks!!
(Have also referred http://technology.amis.nl/2012/06/18/notifying-adf-applications-of-database-changes-fast-and-lean-using-database-query-result-change-notification-part-one/
not sure if that's the way I need to register the listener. ADF should have made that easy.)
Edited by: 996574 on May 23, 2013 3:11 PM

Above link seems helpful to find good blogs.
Especially following blogs looks good;
http://adfwithejb.blogspot.com/2012/12/active-data-serivce-with-data.html
http://adfwithejb.blogspot.com/2012/12/active-data-service-with-active-image.html
Thanks Shay Shmeltzer!

I have upgraded from 4 to 5s inserted the sim and followed the on screen instrutionsBUT i have no service can you help please?

I have upgraded iphone from 4 to 5s inserted the sim followed the screen instructions BUT I have no service can you help?

The iPhone 4 and iPhone 5s use different sized sims. So you can't simply have inserted the 4's sim into the 5s.
If you got a new sim, was that sim activated without your carrier?
You need to contact your carrier if you wish to have your service on the 4 transferred to a sim that the 5s can use.

WSSPI-0011.2: Number of Active Web Service Connections (66.00) are ( = 64.00) [Policy: IIS_0011]

We got below Hp alert on Exchange 2010 CAS server.
Please help me to fix this issue
WSSPI-0011.2: Number of Active Web Service Connections (66.00) are (>= 64.00) [Policy: IIS_0011]
Raj

Hi,
I recommend you use ExBPA to check the health of your Exchange server.
Is there any issue about message traffic?
Please check if there is any related events in the application log.
Best regards,
Belinda Ma
TechNet Community Support

BES vs BES/BIS Service - Restrictions?

Hi
I have a BB Curve 8900 and I have BIS service on it. I have friends and colleagues who have BES service on their BB Bold 9700. Company IT Policy restricts them from adding me on their BBM. They receive my invite and accept it but it goes into the void. I am also able to send them PIN msgs and they receive it but they can not reply to them.
My service provider provides a service called BES/BIS where both BES and BIS are provided. I have taken this now and still have the same problem as before. My question is, if my friends subscription is changed to BES/BIS will that allow them to communicate with me on the BBM through the BIS?
Thanks.

Hi and Welcome to the Forums!
Nope. The level of data plan that one has only defines the level of services that can be made available. With BES, if an IT Policy restricts some of those services (e.g., BBM and PIN messaging), then those services are simply not available on that BB. So, changing plans will have no effect on this service being blocked by the IT Policy for as long as that IT Policy exists on the BB.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Regarding BIS Service in INDIA

TO WHOM SO EVER IT MAY CONSERN
Sir / Ma'am,
My Name Is Jay Mehta(India) and I'm using BB since 3 years.I'm using Curve 9360.
Now BBM Introduce in iOS and Android they are using this serevice on internet they don't have to pay any BIS cost.
One of the store delear to told me that in BB OS 10 you can use all feature on internet you dont need BIS service.
So my point is how long we have to pay 400 INR.?
So is Blackberry(RIM) will launch any update for OS 7 user? So they can use all service in internet cost? Or they will reduce BIS cost?
Awaiting for your reply,
Regards,
Jay Mehta

Hi and Welcome to the Community!
Please see this "sticky" post, along with the threads to which it links, for helpful information to guide you as you proceed:
http://supportforums.blackberry.com/t5/Social-Lounge/How-This-Site-and-Formal-Support-Work/td-p/2540...
Hopefully, this information will be of use to you.
ALL pricing is a matter for the local carriers to set...BB does not force any pricing models onto the carriers, they decide for themselves what they will charge. In some markets, BIS has never cost more than a non-BIS data plan. In other markets, it has always commanded a premium price. Each market is different, and controlled not by BB, but by the local carriers.
Cheers, and Good Luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Activating BIS service in china! Help!

Similar Messages

Maybe you are looking for