Activating transfer rules for new source system

Hi
we are having 2 R/3 source system in BI. I had activated all the transfer rules with the first source system and now i have created a new source sytem connecting to a different R/3 client. I tried to change the transfer rules point to the new source system using the program RS_TRANSTRU_ACTIVATE_ALL giving the new source system and the infosource name. But i get the error "No Transfer Structure Selected" when i execute the prg.
how can i change the source system without creating the transfer rules for the new source but use the existing transfer rules and just change the source system assigned to it????
Regards
Sujai

Hi Sujai,
There are many cases when this program is used.
When the Trans rules get de-activated due to impact,we need to first replicate the data source and activate the TR using this program.This generally occurs during the data loads in prd.
It does not makes sense to transport it when there r no changes done to the TR.So simply,u can use this program to activate.
If the program does not work,then you are left with the transport option.
Thanks & Regards,
Suchitra.V

Similar Messages

Transfer Rules for two Source System in Production

Hi All,
I have a question.
I have source system ECDCLNT230 (ECC Devlopment) which is connected to BIDCLNT200(BID Devlopment) I have two production source system ECPCLNT410 (ECP Pre Production Client) & ECPCLNT400 (ECP Production Client) which i want to connect with BIPCLNT400. when i transport my content from ECDCLNT230 to ECPCLNT410 and ECPCLNT400 , it works fine. i created 2 source system in BIPCLNT400 and replicated data source in to BIPCLNT400 so all data source has replicated.
Now when i transport the request from BIDCLNT200 to BIPCLNT400, i need two transfer rules, two transformation one for each source system. for that what kind of settings are required.
Thanks is advance.
Regards,
Komik Shah

Hi,
If I understand correctly, in your BW Production system, you want to connect / load data from your ECC Pre Production and Production system.
In this case, to automate the transport needed for changes of transfer rules for both source system, you will need to have two tranfer rules in your BW Dev. You can either create two source system in Dev pointing to the same ECC Dev system, or one to ECC Dev and the second to ECC QA. Use different name for this two source system.
In BW Production, you then then maintain the source system conversion of both source system.
Thanks.

How to transfer all the transfer structure to new source system ?

Hello
I have created a new source system on my BW system with new RFC connection .
I want to replace all my old transfer structure with old source system to this new system .
can u plz let me know how can i do this ?
Regards,

can u plz many help in this ?

Transfer rules are missing for selected source system in BI content

Hi All!
The problem is: in BI content (Release 704, level 0003, SP SAPK-70403INBICONT) when I select needed source system (for example, A) only I can not find any transfer rules (0RPM area, 3.X transfer rules). When I select more than 1 source system (B, C..), I can see lot of different transfer rules for 0RPM area, but with assignment to another systems (B, C..). How can I get in Business Content transfer rules for data sources from needed source system (A)? Any help appreciated!
Regards, Iryna.

Hi Rathy!
Thank you very much for your quick help! Usually I do the same. Now I faced with BI system, where data source were already activated in system A and replicated. I can see all needed active sata source un BI already. But I can not see transfer rules in content!
What you can advise?
Reagrds, Iryna.

Why no transfer rules in our BI system

Hi.experts:
I have a BI system,and the patch level is BI_CONT 703 patch 8..and My SAP BW version is SAP_BW 700 patch 0018.I found that no transfer rules for 3.X datasource and 3.X infosource.
Any body has the same situation?
Best Regards
Martin Xie

Hi,
Not sure if this helps.
Check in BI Content tab --> Source system assignment button. Flag the source system for which you are installing the transfer rules. Then you will get transfer rules for the source sytem.
If nothing is flagged in the source system assignment, you can find transfer rules for all the systems.
Regards,
Murali.

Transfer rules to the new source system not visible in Transport connection

Dear All,
Recently our source system has been changed from R3 4.7 to ECC 6.O. Corresponding to that all the activities in BI have finished successfully. All my datasources in 4.7 have been replicated in ECC 6 in BI and transfer rules re-assigned. I have also collected them in a Transport request.
Now when I am checking the entire flow in Transport connection, it shows me the transfer rules pointing to the old system only. That is, in RSA1 it shows the new system assignment. But in Transport connection not.
What I have to do so that I can crosscheck in Transport connection all my objects having transfer rules to new system ?
Regards,
Srinivas

I think you should check the source system assignment in the transport connection. It might have directed to the old sytem.
Cheers
Chanda

No transfer rules for FI master data sources

Hi all
I didnt get transfer rules for some of the FI master datasources.
0GLACCEXT_T011_HIER
0NEG_POSTNG_TEXT
0ITEMSELFLG_TEXT
When I right click on datasource->create transfer rules->Only other option is enabled.WHen I say continue I am getting this error
*Infosource(transaction data) is not known.
How to resolve this isssue.
Thanks.

Double click on the data source and go to edit mode, system automatically provides the corresponding BI content infosources if any and install the same.
Not all the fields will be mapped with BI info objects. Only necessary ones as defined in BI content will be available for you.
If you feel the mapping is incomplete you can modify the same according to the requirement.
Hope this helps.
Regards,
Rangz

How to find unsued Transfer Rules and Data Sources for a Master Table...??

How to find unsued Transfer Rules and Data Sources for a Master Table...?? My requirement is i need to delete those Transfer rules and Data Sources which are not in use

Hi
Go to manage of the Text or attirbute of the master data object, see what are being loaded daily from there and delete the remaining.
Cheer
Ans as expected, Please reward

New Source System Client for BW

Hi All,
Currently we have R/3 QAS Clint 102 connected to BW QAS. We want to get rid of this Client 102 and connect a new QAS Client 100 (same server but different Client) to BW QAS. I created a new Source System (QAS100) in BW QAS and did a restore.
My question: How do I get all the Source system dependent Objects like InfoSurces, InfoPackages etc for the new Client 100 in BW QAS? Please help me and I promse to generously reward points.
Thanks, very much in advance.
Srini

Hi A.H.P,
I am pretty sure this will resolve the issue. I will come back again and reward 10 points once we apply a working solution.
Thank you for a quick reply.
Srini

Steps for creating new source system

Hi guys
We are on BI 7 and ECC 6 now...We are planning to get the data from other source systems (R/3 4.6)which are existed in different place.
Now my question is what are the steps to get the data from this new Source system and whats BI developer role for this...
Example: Inorder to establish the connection between BI and R/3 we need an RFC connection (Is this done by BASIS / BI )? If its BI , then what do I need to ask for ?
afterthat what are all the questions or points that I need to raise to the folks in the meeting...
Please advice
regards

Hi
refer to this link below
http://help.sap.com/saphelp_nw04s/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
Exactly this will be taken up by BASIS team so that at any time if we have any issues with RFCs like RFC connection failure we will not get any data to our targets.
Then we have to raise ticket to basis stating this failure

How can I activate the transfer rules for the ODS updating a data target.

We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to 'update the data target' I get a date & time stamp' error on the info-package transfer rules.
I then Replicate the datasource 80FIGL_O01.
I must then 'activate' the transfer rules.
However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
How can I activate the transfer rules for the ODS updating a data target.
The error text is as follows:
DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 02/15/2007 10:42:33.
The time stamp in the BW system is 11/07/2006 13:11:54.
System response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
Thanks for your assistance.
Denny

Hi Dennis,
Try, using Business Content to activate your data source
hope this will help you
How activate business content?
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm

Configuring of a new source system in BW

Hi Experts
We have to set up a BW system, which will have 2 source systems( ECC) clients 550 and 590 of the same ECC ( ECC QUALITY). One client is already there and we have to configure another client of source system with the sane BW Client 350. I understand that the dataflow is partly different (e.g transfer rules and datasources are source system dependent). My question are
1.     How we can configure a Source System on BW.
2.     What changes if any I have to make in the existing system (BW)
3.     What will happens to the Existing Data-sources ( Do I have to replicate each and every data-source of the existing ECC clients to New ECC client.)
4.     Do I have to create New transfer and update rule for the new client
Any other point Pl. advice.
Thanks in advance.
Dinesh Sharma

You can more than one source system to onw BW client.
You have to use source system compounding to differentiate between characterstics values if you are loading to the same object. Otherwise you need to use separate characterstics for ex : Yxxxx object for one source system and Zxxxx object for another.
Also the dataload timing should be setup properly. Otherwise it may leads to object locks.

Transport InfoSources to New Source System

Hi.
When implementing BW in our QA environment, all InfoSources, and their related InfoPackages, Transfer Rules, Update Rules, etc.) were created using a temporary R3 QAS source system mapping (ex.TMP). We are now removing this temporary client and I now need to change my InfoSources (along with customized Start Routines, InfoPackages, etc.) to point to a new QAS source system (ex. PRM).
Note that this new source system is already identified as a source system for BW and all DataSources created on TMP have been transported to PRM. Subsequently, all DataSources have been replicated from PRM to BW.
However, I'm having trouble on the BW end. I can't easily
transfer the InfoSources, etc. to the new source system. I've asked some BW / Basis folks and they suggest transporting the InfoPackages out-of and then back-into the BW QA client. Is this possible? Is there a better way to push my InfoSources, InfoPackages, etc. from the old source client (TMP) to the new one (PRM)? Thanks!

Dear Dave
Please do not attempt to change the logical system name your self, as I feel that you have not tried it before.
This is some thing that your basis people have to do. Depending on the size of database this change can take from 2-24 hours (not exact times, but just some thing to show the magnitude of the task).
Good luck
/FZA
Message was edited by: Fariborz Zangoui

Add new source system to BI

Hello,
Our requirement is to load data from a different R3 client to which we dont have a connection yet.
The idea is to create a new connection but keep the existing one.
Is there any automated tool to do this? We would like to avoid the manual creation of all infosources and transformations from the new source system, but to copy them from the existing one.
We found that there is a tool for replacing the current source system with another one (BDLS), but we just want to create this new one in paralel with the current source.
Thanks!!
Pablo

Hi,
what you can do is, create a transport request containing all source system related things like the infosource/datasource assignment, transfer rules... and import that transport back into your dev system. Before the import you should maintain the settings for source system after transport accordingly.
Siggi

Duplicating the existing sourcesystem assignments to a new source-system

Hi all
We have another new sourcesystem (logical system) in our BI system.
This is a copy of the productive erp-sytsem, upgraded to EHP4.
Now we want to test the connectivities and data load procedures.
Is there a possibility to "copy" all the existing datasources/transformations of an existing system
to this new system without using transports?
We already tried using report 'RBDLSMAP' but it seems to overwrite the existing assignments.
Any idea??
Thanks
Thomas

Hello Thomas,
You have to use a transport , to transport the source system dependent objects normally the following procedure is used:
RSA1
Transport Connection
Button 'Collection mode' set to 'start manual collection'
Press 'Source system assignment' button (it's the one left of the
'Request BEx' button)
Select the source systems you want to save the transfer rules for
Continue
Button 'Grouping' set to 'Save for system copy'
At the left border click on 'Object Types'
Extend tree 'Source system' LSYS
Double click on 'Select objects'
Select the source systems you want to collect objects for
the source system is now displayed in the right box
Press collecting button ('gather dependent objects')
this may take a while
Right click on the root of the tree and select
Transport all below
Expand the whole tree and check if there isn't an object which is locked
by an other open transport request !!
(the column 'Transport request' has to be empty (BEFORE deleting the corresponding source system
connection!)
Kind Regards,
Des

Activating transfer rules for new source system

Similar Messages

Maybe you are looking for