Activation du programme - Version d'évaluation - Evaluation version
Bonjour tout le monde,
J'ai acheté lightroom le 9 octobre 2013 et l'ai installé sur mon ordinateur de bureau et la seconde copie sur mon ordinateur portable. Jusque là, pas de problème.
J'ai changé il y a quelques jours d'ordinateur sur lequel j'ai installé lightroom. Et aujourd'hui, surprise, je reçois un mail de la part d'Adobe me remerciant d'avoir téléchargé la version d'évaluation. J'ai pourtant bel et bien acheté la licence. Est-ce que j'aurais dû le désinstaller de l'ancien ordinateur (si c'est le cas, ce n'est pas grave, je l'ai encore dans un carton).
Merci d'avance pour vos réponses.
Raph
Hi all,
I bought Ligthroom the 9th october 2013 and installed it on my computer and my laptop. So far so good.
A couple days ago I changed my computer and installed Lightroom on it,too. And today I've received an email from Adobe saying that I use an evaluation of Lightroom. Is it because I didn't unistall one of the copy on the other computer. If it's that, it's not a big deal, I got the old one in a box. Thanks for saying me.
Thanks a lot.
Raph
Bonjour,
L'équipe de Creative Cloud se penche sur le problème. Pour une certaine raison, Creative Cloud pense que vous êtes sur un système d'exploitation Danois, donc il met cette langue comme défaut.
En attendant, il y a moyen de résoudre en partie ce problème.
1. Désinstallez InDesign CC de votre système. Vous pouvez faire cela en lançant l'application "Uninstall Adobe InDesign CC" située dans le répertoire d'installation d'InDesign. (Probablement Applications > InDesign CC)
2. Lancez l'application de téléchargement Creative Cloud, vous devriez avoir un écran comme le suivant après avoir sélectionné le menu "Apps":
3. Selectionez le menu avec la petite roue en haut à droite et cliquez sur le menu "Indstillinger".
4. Cliquez ensuite sur le menu "Apps" et, dans le menu "Appsprog", choissez "Français". Sur votre système, Dansk (Danois) est probablement sélectionné par défaut.
5. Toutes vos Applications Creative Cloud devraient alors être installées en Français - pour autant que vous ne mettez pas à jour l'application de téléchargement Creative Cloud. Si vous la mettez à jour, le defaut sera sans doute de nouveau Dansk (Danois).
On recherche encore la cause pour laquelle votre système choisit Danois par défaut. Veuillez m'envoyer une capture d'écran des Préférences de Langue et Texte de votre système d'exploitation.
Cordialement,
--Jean-François.
Similar Messages
-
I am having trouble activating my new version of Lightroom on one computer where it says it has been fully installed and it is stuck on 90% on my laptop. I tried phoning the helpline but was told the number dialled was incorrect but it is the one given on the Adobe help page. So what is the correct tel no for support?
carolinechx wrote:
i know the description may be a little bit too confusing
Mostly because you are not using any capital letters or paragraph returns and your post is difficult to read. -
IPhoto started locking up on loading having worked fine previously. If I disable iCloud streaming and sharing programme starts up with no problem and works perfectly. If I attempt to start iPhoto with streaming/sharing active the programme locks but if I then disable sharing and streaming it will then continue to load. There are no other iCloud problems with other programmes as far as I can see.
Try this fix discovered by User photosb189:
From Finder, hold down the option key on your keyboard and click on the Go menu at the top of the screen
Select Library from the drop down menu
Then navigate to Application Support > iLifeAssetManagement > assets
Right click on the 'sub' folder and choose Compress
Drag the resulting zip file to your Desktop (as a backup)
Go to your System Preferences and choose iCloud
Turn OFF the iCloud Photos option
Go back to Library > Application Support and DELETE the iLifeAssetManagement folder
Now, in System Preferences, turn the iCloud Photos option ON
iPhoto should now be able to launch. Give it enough time to re-download your Photo Stream content. if you are missing any of your My Photo Stream photos (more than 30 days old), unzip the sub folder on your desktop and drag that into iPhoto.
Back up first, of course. -
Active and delivery version of ODS
hi
can we check or compare ther delivery version and active version of the infosource.
is there any transaction or table other than RSA1-business content where we can compare objects in infosource.Hi,
RSIS info source for transaction data
RSOS info source for master data, texts, hierarchies
Regards
Siddhu -
Problems with installing and activating and older version of Creative Suites
Hi. I'm using a MacBrook Pro with Max OS 10.6.8 and am trying to install an old version of Adobe Creative Suite (2 Premium) that I have. I got through the whole installation process yesterday, but was unable to activate it. I had to quit without going further. This morning, I read through the info that comes with the program and it looked like I would need to reinstall everything, because I stopped before activation. When I inserted the 1st disk, it did not load right and got stuck. I had to forcibly eject it. However, Disks 1-4 are still loaded on my computer. I have 3 questions:
Can the older programs no longer get activated?
If they CAN, how do I get from the info loaded under my Applications folder to the activation?
Alternatively, since I stopped before activation and hit "quit" rather than "cancel," do I have to start the whole process all over again from the beginning?
Thanks for any help you can give me!Put your CS2 disks away (since they can no longer be used) and follow these instructions from Adobe
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3 -
Activating an old version of PhotoShop
I just recently had my computer cleaned up, de-bugged, etc. When I got it back and tried using Photoshop CS 8.0, I got this message:
"Your computer's configuration appears to have changed since the last time this product was activate. To continue using product, please click OK to activate again."
That link took me to an activation box. Only when I try the automated activation, it does not work and I do not get an activation code. The telephone activation number provided doesn't work, and has a message saying it no longer does telephone activation and refers me to the website. When I tried an Adobe help chat, I was told the activation count for the product is shut down and was referred to this forum.
When I asked if there was a phone number I could call for help, I was told no.
This is VERY frustrating!Thank you for your help, John. Will there be a fee? I don't want a newer
version, just want to be able to use the one I have!
Is the download something that could be done on someone's computer with a
high speed internet connection, then put on a flash drive and put on my
computer? If the download is over 10.0 MB, my server will not support it.
I am going to share all this with the computer consultant that cleaned up my
hard drive and messed things up in the first place. I think she should be
the one to fix the problem she created! The program was working fine before
she did whatever she did to my computer to clean it. Now I get the message:
"Your computer's configuration appears to have changed since the last time
this product was activated. To continue using product, please click OK to
activate again."
And since that activation process is no longer available - I'm stuck! -
Regarding activation in new version
hi
i am working on bi-7 at present,i got a problem during business content activation,i am activating accounts receivable,but i am unaware that whether we need to activate the 3.x datasources and 3.x infosources in new version.even i can see only transfer rules and update rules what about trasformations and dtp,waiting for your reply ,i will assign points.See:
* https://support.mozilla.com/en-US/kb/Firefox%20does%20not%20ask%20to%20save%20tabs%20and%20windows%20on%20exit
Firefox 8
* getfirefox.com -
How does DIAdem keep track of which version is active when multiple versions are installed?
I need a way to find out which version of DIAdem is active, without creating an automation reference. How does DIAdem keep track of this? I don't think it's through the registry as far as I can tell. Thanks.
Hi,
I'm not quite sure what you mean by "version of DIAdem is active". If you are trying to reference DIAdem from an external program, you will need to use an automation reference. Besides this case, I am not sure what you are referring to.
Perhaps a short description of your application or intended use will help me point you in the right direction.
Allen P.
National Instruments -
For a particular material there are active valid Prod Versions.
Hi all,
If there are two active Prod Versions for a material in R/3 for a PP-PI scenario.
Prod Version 0001 from Lot Size 1 to 17000 Kg
Prod Version 0002 from Lot Size 17001 to 340000 Kg
The BOM and Master Recipes are different in both the Prod Versions.
In Order type dependent parameter the Selection of Prod version is set as manual selection of Prod Version.
1. If the Material Master data Fixed Lot size is (Lot size data=FX for this material in MRP1 view ) maintained as 17000 Kg. All the Planned Orders will be of 17000Kg. Then Prod Scheduler needs to change the Planned Order Qty manually every time for Prod version 0002 ?
Please guideDear,
IF the lot size is FX, then whatever may be the production qty as per the requirement system will create a planned order of size 1700.
Now let us say as per the MRP calculation if planned order requirement is 1600 qty, system will choose the production version 1 and the planned order qty as per the lot size will be 1700.
If the MRP calculated qty is 1701, then system will choose production version 2 and system will create two planned orders with qty of 1700.
Yes with setting the planned order qty has to be adjusted to get the realistic planned order qty.
Hence you can go for lot size EX, with this setting the above situation will be as below.
If the qty calculated from MRP is 1600, production version 1 is selected and the planned order qty is 1600
If the calculated qty from MRP is 1701, production version 2 is selected and the planned order qty will be 1701.
Please let us know is it answered your question? -
NO ACTIVATION OF STUDENT VERSION POSSIBLE!
AFTER 4 weeks of waiting for adobe germany to reply, there is still NO ACTIVATON CODE FOR THE STUDENT VERSION! I SENDED EVERY SINGLE FILE AND ATTACHMENT THAT WAS NEEDED (STUDENT LICENCE, driver LICENCE ETC.) AND WE DID NOT GET ANY ACTIVATION CODE FOR AN ALREADY PAYED PRODUCT!!!
IT S A REAL IMPERTINENCE BY ADOBE!This is a user-to-user forum, and only occasionally an Adobe staff member posts answers her - but it cannot be expected.
The rest of us are just users like you. We can help you with technical problems using Lr, but commercial problems or problems of serial numbers are not in our domain.
You have to contact Adobe directly - either by phone or with the new chat website: http://www.adobe.com/support/chat/ivrchat.html -
Activating a trial version of RoboHelp
I'm using a trial version of RoboHelp and have created the
max number of pages. I would now like to purchase RoboHelp, but I
don't know if my work will be maintained. Do I simply need to copy
the folder over to the new install.
I did read that I must uninstall the trial before installing
the full version. Does anyone have some suggestions?Hi Moosegolfr
Good to hear of another 'RoboTrialler' becoming a real
'RoboHelper'! It really is a fabulous product.
If you have created your project within the actual RoboHELP
directories, you will need to copy the entire project directory to
a different location. When you uninstall, most of the RoboHELP
directories (if not all) will go, so you would most likely loose
your project.
I always create my project directories in their own
independant directory.
Regards -
Hi I have a 30 day Lightroom Trial. I have purchased from Amazon. How do I activate my trial version?
I cannot see anywhere to enter a serial number.
Do I have to reload from the DVD when I receive it?
Can I load the Apple and Windows versions from the DVD? I have a MacBook Pro and a HP PC running windows.Redemption Code Help
Mylenium -
Redundancy not active after upgrade version from 7.4 to 7.5
I've upgraded both Cisco CSS11506 Load Balancer to ver 7.5. However, the Box-to-Box LoadBalancer is not running when " show redundancy".
Box A configure
circuit VLAN1
description "Management VLAN for SW2950"
ip address 192.168.xx.253 255.255.255.224
ip virtual-router 1 preempt
ip redundant-interface 1 192.168.xx.254
ip critical-service 1 upstream_downstream
circuit VLAN2
description "E-Bill Circuit"
ip address 192.168.xx.29 255.255.255.224
ip virtual-router 2 preempt
ip redundant-interface 2 192.168.xx.30
ip redundant-vip 2 192.168.xx.17
ip redundant-vip 2 192.168.xx.23
ip critical-service 2 upstream_downstream
Box B configure
circuit VLAN1
description "Management VLAN for SW2950"
ip address 192.168.xx.252 255.255.255.224
ip virtual-router 1 priority 105 preempt
ip redundant-interface 1 192.168.xx.254
ip critical-service 1 upstream_downstream
circuit VLAN2
description "E-Bill Circuit"
ip address 192.168.xx.28 255.255.255.224
ip virtual-router 2 priority 105 preempt
ip redundant-interface 2 192.168.xx.30
ip redundant-vip 2 192.168.xx.17
ip redundant-vip 2 192.168.xx.23
ip critical-service 2 upstream_downstream
CSS506INT3# show redundancy
Redundancy: Disabled Redundancy Protocol: Not Running
Redundancy is running before upgrade. Is anything wrong??show redundancy would never show you anything with this config.
'show redundancy' is used for Box-to-Box redundancy.
What you have configured is VIP/Interface redundancy.
You need to use the command :
show redundant-?
redundant-interfa.. Show redundant-interface information
redundant-vips Show redundant-vip information
regards,
Gilles.
Thanks for rating this answer. -
Does phone support exist? Customer service? The airspeed velocity of an un-laiden Swallow?
Thanks everybody… I killed the process again in Task manager after trying compatibility modes… noticed something glaring at me as I killed the process. 32 bit. Old workstation on Win7 that was working was 32 bit and the Win8.1 is (drumroll please) 64 bit. MY guess is that if Adobe killed the ability for this to run it would have failed upon an attempt to activate, not upon launch. I think Nancy might have hit it on the head. Let me stew on this for a bit if I really want to pay more for features I already paid for once.
Mark J Laurence, MCSE, CET
Electrical Designer / Network Administrator
Marquess & Associates, Inc -
Activating/changing Multipoint server 2012 from evaluation to licensed
Hi
Could you please help in how to activate or change the Windows Multipoint server 2012 from evaluation to licensed one?
Below URL is for Windows server 2012, is this the same steps i need to follow?
http://technet.microsoft.com/en-us/library/jj574204.aspx
Thanks for your help!!according to this you should be able to
http://technet.microsoft.com/en-us/library/dn303416.aspx
Upgrade means
moving from your existing operating system release to a more recent release, while staying on the same hardware. For example, if your server is running Windows Server 2012, you can upgrade it to Windows Server 2012 R2. You can upgrade from an evaluation version
of the operating system to a retail version, from an older retail version to a newer version, or, in some cases, from a volume-licensed edition of the operating system to an ordinary retail edition.
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn:
Maybe you are looking for
-
Can't update my iPhone 4 to iOS 5
My iTunes keeps getting all the way through the update, and at the very end pops up with an error code 3194. I've tried everything that I've read to fix it, but I can't seem to get it to work. Can someone please help me. I've been trying to get it to
-
Find table column pattern in a variable
I have a variable @a. There is a table B with column A,C. I need to find out those values of column A where column C values are a subset of @a. For example @a='123456abcd'table Table B A C 1 abcd 2 xyzt In the above case I need to ge
-
Transfer library to external drive
My hard drive on my imac desktop is full. How do I transfer my itune and iphoto libraries to an external drive?
-
How to import AVCHD from Sony A7S to Premiere Pro CC 2014 on Windows 7
Hi, I'm a comparative newbie who just needs to edit some training videos shot on Sony A7S. The adobe help documents suggest that PP CC 2014 can import .MTS files in AVCHD 25p format, but however I approach this it seems to come back with 'unsupported
-
When I first installed iCould it worked fine. Now I log in and then try to open mail, notes, anything I get an error message. Does anyone have any ideas?