Activation Error - Access Denied when activating windows 2008 R2

I have a Windows 2008 R2 server, which was activate, now suddenly its giving an activation required message, when I try to apply my lic. key it gives an error
Windows Server 2008 R2 Activation Error 0x80070005
Access Denied
I want the error to be resolved.

Hi,
This issue may be caused by:
Lack of permission
Missing registry entries
Please try the method as Dave mentioned.
In addition, you could refer to this article for more detail information:
Activation Issue - The following Failure occurred while trying to use the product by: Code: 0x80070005 Description: Access is denied
http://panerarichang.blogspot.com/2012/02/activation-issue-following-failure.html
Please feel free to let us know if you have any update.
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Creative Zen 8gb- unknown error/access denied when adding mu

This is so frustrating....please help!? I have already reformatted, disk cleanup, reset and still nothing. When I'm trying to add new music to my Creative Zen 8gb I get the both error messages : "unknown error" when using the Media Zen 'browse media' option and when using the Windows Explorer drag and drop selection "access denied". Please help I've tried almost everything and it won't copy any music not even pictures.

What operating system do you have? Win Xp (sp2) (sp3) or Vista?
Note: I can only help you on Win Xp (Sp2)
Try this:
. Go into the "Recovery Mode" on the Zen disconnected from the PC and clean-up & reboot.
Check to see if this fixed your problem?
Next
. Connect your Zen to the PC
2. Select "Organize media files in this device using Creative Media Explorer"
3. You should have a "docked screen" ?
4. Under Windows, Control Panel, System, Hardware, Device Manager then look under Portable Device then
look for Blue (Yellow is bad) Creative Zen then check to see if the device is ok.
Do this for error code (0)
http://www.pchell.com/hardware/usbcode0.shtml
Do this for error code (9)
http://technet2.microsoft.com/window....mspx?mfr=true
Check back
BTW - I hope you are adding music to the right folder e.g. Creative Zen (My Zen) Media Library / Music
Cheers

WinPE 5 error access denied when applying .wim

Hello TechNet,
I have been struggling with deploying surface pro 3s using DISM. I keep receiving an access denied error when I try to apply a windows image to a brand new surface pro 3 using the latest version of DISM. Any insight would be greatly appreciated.
Regards,

I ran all the cleanup commands and created a new image. I then tried to apply the image and I got the same access denied error message. I looked at the DISM log and it said:
2014-12-03 12:54:26, Info                  DISM   DISM Provider Store: PID=912 TID=916 Getting Provider WimManager - CDISMProviderStore::GetProvider
2014-12-03 12:54:26, Info                  DISM   DISM Provider Store: PID=912 TID=916 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
[912] [0x80070005] RestoreDirMetadata:(3768): Access is denied.
[912] [0x8144012d]
2014-12-03 12:54:28, Warning               DISM   DISM WIM Provider: PID=912 [RestoreDirMetadata:(3774) -> Error restoring directory metadata] c:\Program Files\WindowsApps\Flipboard.Flipboard_2014.902.1532.705_neutral_~_3f5azkryzdbc4
(HRESULT=0x80070005) - CWimManager::WimProviderMsgLogCallback
[912] [0x80070005] RestoreDirMetadata:(3904): Access is denied.
[912] [0x80070005] WimCreateDirectory:(4384): Access is denied.
[912] [0xc144012e]
2014-12-03 12:54:28, Error                 DISM   DISM WIM Provider: PID=912 c:\Program Files\WindowsApps\Flipboard.Flipboard_2014.902.1532.705_neutral_~_3f5azkryzdbc4
(HRESULT=0x80070005) - CWimManager::WimProviderMsgLogCallback
[912] [0x80070005] RestoreDirTree:(4665): Access is denied.
[912] [0x80070005] WIMApplyImageInternal:(1069): Access is denied.
2014-12-03 12:54:28, Error                 DISM   DISM WIM Provider: PID=912 TID=916 base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:1095 - CWimManager::Apply(hr:0x80070005)
2014-12-03 12:54:28, Error                 DISM   DISM WIM Provider: PID=912 TID=916 base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:4205 - CWimManager::InternalCmdApply(hr:0x80070005)
2014-12-03 12:54:28, Error                 DISM   DISM WIM Provider: PID=912 TID=916 Error executing command - CWimManager::InternalExecuteCmd(hr:0x80070005)
2014-12-03 12:54:28, Error                 DISM   DISM WIM Provider: PID=912 TID=916 base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:1936 - CWimManager::ExecuteCmdLine(hr:0x80070005)
2014-12-03 12:54:28, Error                 DISM   DISM.EXE: WimManager processed the command line but failed. HRESULT=80070005
2014-12-03 12:54:28, Info                  DISM   DISM.EXE: Image session has been closed. Reboot required=no.
2014-12-03 12:54:28, Info                  DISM   DISM.EXE:
2014-12-03 12:54:28, Info                  DISM   DISM.EXE: <----- Ending Dism.exe session ----->
I searched Google for those error messages but I couldn't find anything similar to what I am experiencing.

Error (access denied) when starting Client Runtime Audit Browser

LS,
After starting the OC4J instance, I try to start the Client Runtime Audit Browser. For a brief moment I see a DOS-box, then an IE-page appears saying the following:
======================================================
ERROR
The requested URL could not be retrieved
While trying to retrieve the URL: http://127.0.0.1:8999/owbb/RABLogin.uix
The following error was encountered:
Access Denied.
Access control configuration prevents your request from being allowed at this time. Please contact your service provider if you feel this is incorrect.
======================================================
Any idea whether this is a local problem?
I've tried applying the settings as mentioned in the configuration guide, but the Bypass option for the proxy is impossible to set since we do not use a proxy server.
Your thoughts?
Regards, Patrick

Good morning All,
Maybe I've got the wrong idea of what is all needed to be able to run the RAB locally, but I thought that starting the OC4J instance would be sufficient to get started.
In the Installation and Configuration Guide the following is mentioned:
2.7 Step 6. Configure the Web Browser for Design and Runtime Audit Browsers
2.7.1 Add "LOCALHOST" to Your Web Browser Proxy Server Bypass List
2.7.2 Configure the Cache Management in Your Web Browser
2.7.3 Configure Warehouse Builder with a Net Service Name
As said before:
@2.7.1, we do not use a proxy (according to Internet Explorer settings) therefore I can't add 'localhost' to the bypass-list, but then again I think that it does not need to be, since there is nothing to be bypassed in the first place.
2.7.2 has been implemented.
@2.7.3, I added the net service name manually to TNSNAMES.ORA (since I also needed that to be able to get on to the database using TOAD and SQL*Plus).
We do not have 9iAS integration for RAB, nor do we have OEM integration.
Are there other things that need to be implemented? Mentioned so far have been HTTP-server and RTP services, but paragraph 2.7 does not mention anything about this. Maybe there are certain services that need to be running on the server (like HTTP and/or RTP), even though I would like to run the RAB locally?
Where does one actually need RTP for?
Thanks in advance.
Cheers, Patrick

Error "access denied" when I browse to an OPC

The following is generated in ICONICS OPC DataSpy when I browse to an OPC
Item in my National Instruments.OPCLabVIEW server on a remote 2000 PC.
ICONICS OPC DataSpy ready (free version)
Creating Instance of "National Instruments.OPCLabVIEW" on node Nak-mis...OK
(0x00000000, The operation completed successfully.)
Calling IOPCBrowseServerAddressSpace::QueryOrganization()...FAILED
(0x80070005, Access is denied.)
Calling IOPCBrowseServerAddressSpace::ChangeBrowsePosition()...FAILED
(0x80070005, Access is denied.)
Calling IOPCBrowseServerAddressSpace::BrowseOPCItemIDs()...FAILED
(0x80070005, Access is denied.)
I am able to browse to my tag items using NI's Server Explorer and I can
succeffully run NI example c
lients.
I would like to be able to verify OPC connectivity independent of an NI
solution as we will be expected to serve data to another vendors client.
thank you very much.
chris

Chris,
currently, I do not have the setup to verify this behavior. However, for me it looks like your DCOM registration is not correctly configured.
Remote OPC is going through the DCOM configuration/settings/access rights of your networked PCs. To enable access rights you should have a correct domain server that has correctly set up users. With the Start>Run>dcomcnfg you can specify the access rights for all the ActiveX/OPC servers on your computer.
Start>Run>dcomcnfg
Go to Applications tab and choose Properties of LabVIEW Datalogging and Supervisory Control Module
Go to Security tab and verify if all the three permission catagories are correctly set for the user who tries to remotly access/launch/configure the OPC server.i>
If you use default settings you have to make sure the default is correctly configured as well. To verify go back to Distributed COM Configuration Properties window and go to the Default Security tab.
To start of with the basic test, I would try to be logged in to the two computers with the same user account.
In addition, I recommend to read this Knowledgebase article - you might already have done that...
Accessing a Remote OPC Server Using the LabVIEW DSC Module
Remote OPC Server Communication on Windows NT/2000/XP
Hope this helps
Roland
PS: For general information about DCOM/OPC you might find more info :
www.opcfoundation.org : E.g. This pretty white-paper:
OPC DCOM White Paper
www.microsoft.com : E.g. This detailed: COM Security Frequently Asked Questions

I can´t open FC project ( it is related to my previous post: File error: Access denied when trying to export).

1- Are you using material with an avid codec?
No, I did not use material with avid codec but I wanted to export to a .avi video.
2- What exactly are your clip settings and your sequence settings?
Cilp setting are HDV-1080i50
The secuence is as well HDV-1080i50
3- What do you mean by "mac block?"
Sorry for the word, what I mean is that My Mac collapsed. I was trying to export a video
I was trying to export:
I could not:
The destiny specificated does not allow access for read/write
Check if the folder is just a read folder or check your writing permission.
So I tried to change permissions of the Hard Disk with OS, then, one after another some windows appeared, here first of them, and a detail:
The system extension can´t be used
The system extension "/System/Library/ Extensions/ACard671xSCSI.kext" was not well instaled, the it can be used. Try to reinstal it or contact manofacturer to obtain a update.
Acept
(NOTE: there were a lot of more windows related to differents extensions, some are: "Sustem/Library/Extensions/Apple BMC.Kext"; "(...)Apple EFI Runtime.kext" , "(...) AppleEFIRuntime.Kext/Contents/Plugins/AppleEFINVRAM-kext", etc. I have almost all captured, in case you need more details I can upload the as well).
Then, I turn off the computer (because it stop working with all those pop ups windows) and next time I tried to turn it on, it never restart again ( it turn in but never start the OS), therefore I restarted from the DVD.
4- What did you do when you restarted your mac from the dvd os?
   I just installed over the OS ( advised by a mac technitian), since then...
when I start my mac some windows pop up:
The first window says:
One low safe start item was desactivated
"/Library/StartupItems/DigidesignLoader" was not runnig because it has not the security protocol adjusted.
Acept
The others are the same with: "StartupItems/PACESupport" ,with "StartupItems/Qmaster" and with "StartupItems/SATARaid5Daemon"
And when I try to open FC fileproject a window show up:
Final Cut close unexpectedly while AvidV1xCodec was being used.
I have tried ignore it and restart it a nothing works.
AND THIS IS PRECISELY THE PROBLEM!!
5- Does the mac see the external hard disk?
     Did you try and repair the external drive?
     What format is the external drive?
I have the external disk in technical service, they will try to repair it. It was in MacPlus (registrered) format, configured in Raid 0 ( two hard disk enclosed together and working as one). Now, to recaptured the tapes for the project I have purchase another hard disk ( 1 T and configured it with MacPlus (registrered) format), this new hard disk is well detected by my computer.
My version of OS is
Well, that all I can tell about what happen to me.
Now, as I have said, I can´t open the FC Project.
I have tried to clean the user profile of FC and it doesn´t work either... need some advise..., thanks for your help!!

lotta stuff going on. I'm in the office now and don't expect a client for about 45 minutes. Want to walk thru this via skype or ichat? email me directly if you do. [email protected]
If not, post back and I'll try and walk thru these things.
Also, if you want to email me the project, I'll see if I can open it here.

File Error: Access Denied After Installing FCP X on FCP 7 Drive

Hi, after foolishing installing FCPX on the same har drive as FCP7 (I know against all sane advice and recommendations) I now get File error: Access Denied when trying to save work under FCP 7.
Does anyone have any advice re resolving this issue.
Would be much appreciated, I'm loathe to do a full reinstall if I can possibly avoid it
Thanks in adcance
john

Have you run software update and repaired premissions?
Was FCPX installed before or after FCP7?
FCP7 and the other FCS3 apps should be located in a folder in Applications if you're going to have them coexist with FCPX. If you had FCS installed prior to downloading FCPX, that relocation is done automatically. But you could also do it manually.
If you haven't sen it, here is Apple's best installation practices.
Russ

Error code 0X8007007B when activating windows server 2012

error code 0X8007007B when activating windows server 2012

If your key is for KMS activation it will never activate without the KMS server, make it sure that you have KMS server and your server is reachable to the KMS server. Please see this Kb ARTICLE
http://support.microsoft.com/kb/929826/en-us
http://www.arabitpro.com

Windows 7 Open and Save As dialog box gives an "Access Denied" when using common Windows Explorer features.

On many computers in our environment we have issues in Windows 7 when using the Common Dialog Box. Within the dialog box we get the error Access Denied whenever we try to create a folder. If we try to rename a file it doesn't give an error but
it doesn't work either. We cannot delete a file, still no error, but we can create shortcut.
Within Windows Explorer of the same user it has no issues.
Even if we run an application as administrator it has the same results.
Example: Open Paint (right click "Run As Administrator"); then File, "Save As", right-click in empty space; then New, Folder. This caused the error to popup "Unable to create the folder 'New folder' Access is denied."
Thanks for your help,
Daniel

Hi Daniel,
How are things going? As the article provided above said, for such kind of issues generally it is caused by permission settings.
The article provided several possible solution and please let us know if there is anything unclear about the steps.
If you have any feedback on our support, please send to [email protected]

Photoshop cs4 access denied when trying to install from disc in Windows 7 64bit.

Photoshop cs4 access denied when trying to install from disc in Windows 7 64bit. I tried it in
safe mode and it starts to install but get an error there as well.
What do I do?

So when you put the disk in it won't run correctly? When the disk is inserted you should have a window pop up with 2 options. 1 to install and the other to see what is on the disk. Choose to explore or open the disk. Go to the CS4 folder where the photoshop .exe file is (that will run the setup), right click on the .exe file and choose run as Admin and it should start. See if it will install. If not then read below.
I am not sure how far you got in the install before so chances are you will have to run the CS4 cleanup utility. 2 levels to run at but don't use 1 or 2 just type in the number 3.
http://www.adobe.com/support/contact/cs4clean.html
You may need to run the windows installer cleanup utility too
http://support.microsoft.com/kb/290301
Before you try to reinstall the software ensure that adobe reader is not installed. If it is remove it. It has caused issues in the past with vista and CS4 installs.
Also turn off windows Defender and any anti-virus software. You can keep UAC on in Windows 7.
During the CS4 install at 90 percent it will almost stop and may take 5 to 10 mins to finish. This is normal. What a pain huh......
After install is finished, reboot
After reboot, go to the CS4 64 bit or 32 bit icon (depends on 32 or 64 bit Windows 7) in start area, right click on CS4 64 bit (if you have windows 7 64 bit) and choose properties, compatibility tab and then check run as Admin at the bottom area. Hit apply, ok to close out.
Now start CS4 and run the updater.

When I try to render, it states "File Error:Access Denied"

When I try to render, it states "File Error:Access Denied". I am working with FCP 6.0.3 and am connected to a RAID with other FCP systems tied into it. Any ideas on what this means or how to fix it? Is it a permissions issue? If so, I don't understand how that works. Help!
Steve

Steve, I have the same problem... sometimes!
I have isolated it mostly to my audio files... I used to be able to use .mp3 just fine in FCP 5, but in 6, it seems to really have an affection for .aiff But today, I had to make sure the sample rate was the same! Ugh... so after re-sampling my music to match my other audio on the timeline (44.1) I'm all good...
Hope this helps... I also tried the permissions, etc... and had no needed repairs... and yes, my capture drive is set correctly, and the ownership is ignored, etc.
Michael

HT201442 Activation Error pops up when I trying to restarting my iPhone

Activation Error pops up when I trying to restarting my iPhone

Hello Lazyboy7,
Thank you for using Apple Support Communities!
It sounds like you are getting an error message from iTunes when trying to manually backup with your USB cord.
I found this article to help troubleshoot what might be going on here:
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/ts2529
Take care,
Sterling

BSP Application Error : Access Denied

Hi Gurus,
I have developed a BSP application with an input field and a search help. I am using Java script to popup the search help window and "opener.document.<form>.<field>.value=value;" to pass selected value from search help window to main page. At BSP application level I have checked "Allows Portal Integration" check box. Now, when I try to select the value from search help at runtime, I am getting an error "Access Denied". It works perfectly fine when the check box "Allows Portal Integration" is unchecked. How do I resolve this issue keeping the check box checked.
Thanks in advance
John
<* Input Field *>
<htmlb:inputField id            = "sales_order"
                   value         = "<%= controller->sale_order %>"
                   maxlength     = "30"
                   showHelp      = "TRUE"
                   onValueHelp   = "showSalesOrderHelp()"
                   submitOnEnter = "X"
                   size          = "30" />
<* Java script routine to popup search help window *>
function showSalesOrderHelp()
   newDialog =    window.open("salesOrderHelp.htm","_blank","resizable=no,height=500,width=475");

The problem is that your popup windows probably do not have their domain relaxed. (Usually popp windows are implemented in an iframe, which must also be relaxed in the same way as the main page.)

Javascript "Access Denied" when disabling Ctrl+N in an Iframe

Hello Gurus,
I have disabled the CtrlN from whole IC WebClient application, however I realized that if we focus on Email Editor (whether Disabled or Enabled) I could still get CtrlN clicked for a new window.
I tried the usual way as it is an IFRAME but now I am getting error "Access Denied".
It seems to be a domain relaxing issue to me & I am curious if we have pages from same server why this error is coming.
Any ideas, thoughts would be appreciated.
Regards,
Ankur

Hello Raja,
The issue seems to be unresolved. There is no way I could get rid of this error.
The document relaxing code is there in generated JS file. It seems when an IFRAME is in designmode it couldn't trap events or maybe something like that.
regards,
Ankur

Access Denied when trying to open a file that is encrypted on network share with EFS

I just recently enabled EFS on the default domain policy and created a new network share, encrypted a file and added myself to that file and tried to open the file from my workstation. I then receive an error "Access denied", I also tried
to create a file and encrypt it on that same share and get an error "The requested operation cannot be completed. The computer must be trusted for delegation and the current user account must be configured to allow delegation."
My steps.
1. Enable group policy for EFS, removed the expired certificate that was already there and Created a new Data recovery agent.
2. Created a network share, created a test file, enabled encryption on the file
3. certmgr.msc, personal and requested a new certificate, Basic EFS
4. On the network share and properties of file, advanced, details and added the user
5. from the workstation tried to access the file, Access Denied. I can create any file I won't just can't add attributes to encrypt the file or open an encrypted file
Now if I go to the server where the CA is located which is also the AD server and create share and run the same process it works as expected. I'm guessing I have to export the cert from the CA server as a pfx and import that to both the server that
has the network share and the workstation but that still doesn't seem to work. Maybe I don't understand how EFS works and this is not possible? Any suggestions would be appreciated.

You are correct in not understanding how EFS works.
When you connect to an encrypted file via a network share, the encryption/decryption takes place *on* the server. To enable over the network access, the server's computer account must be trusted for delegation.
The server actually impersonates the user and creates a user profile on the server (containing the defined EFS certificate and private key). The important thing to remember is that the files is transmitted in clear text from the server to the client.
See http://blogs.technet.com/b/instan/archive/2010/08/11/remote-efs-decryption-and-trusted-for-delegation-requirements.aspx
Brian

Activation Error - Access Denied when activating windows 2008 R2

Similar Messages

Maybe you are looking for