Activation never ends

Hello,
I am changing a sapscript and I have a problems with the activation, it never ends. The TOP and EXIT includes are active, I can't activate the application form.
Can anybody help me, please?
Regards
marcos

Hi,
the sapscript is ok (no check errors) and the application form too. But I can't activate the application form. It is shown "50% Activate ZSD_PXDR_22" and it runs till it dumps, because of timeout.
Regards
marcos

Similar Messages

  • Initial Time Machine Backup never ends

    Hi all folks,
    I try to backup my PB12 Disc (120 GB) to a external 500 GB Disc, connected via FW400, but the backup never ends, I think.
    The backup starts with 100MB/min but after 20h (80GB are store to a external Disc) it slow down to 1MB/min.
    With the "Activity Monitor" I see only some disc activities and a "mds" and "mdworker" process use some cpu time only (more than 10%).
    Where can I get some detail information, a log file, about the Time Machine activity from.
    Thanks for any help,
    Lutz

    Hi all folks,
    the initial Backup ends after 2 days (nice to to see, :-(),
    but on the boot volume I can go the time walk only.
    I split my disc into two partitions, sorry.
    Bye, Lutz
    p.s.
    With CCC I spend 4-6 hours to back up my disks only (100GB).

  • Generate New Database job never ends

    Hi all,
    We are trying to generate a new template in our DEV environment, the job remains active but never ends. On every attempt , the process stops in a different table or process.
    The log file (level 5) simply stops in a certain point and nothing else happens. The dbeng9 processes consumes almost 90% CPU but the process siebsh does not appear between the top processes.
    We already tried reset all the servers, gateway, reassign the remote component group, recreating diccache.dat, but nothing worked.
    We use siebel loyalty 8.1.1.1 and oracle 11g 11.2 , on top of aix 5.3
    Meanwhile, the workaround was to generate new template in another siebel enterprise and copied the templates to the DEV environment and extracted the databases.
    Will be very thankful if anyone can help.
    Thanks in advance

    But the problem is that the process really stucked. The siebel.dbf , which should be created during the job , stop increasing the size around 30M while in the other environment, when the process finished , the file reached 80M.
    The log file also suddenly stopped to increase. It really seems that the process is waiting for something.
    We are not having resource problems like disk space , cpu or memory lacking.
    Guys, do you know what kind of consistency should be checked for GennewDB? If the repository table definitions have differences when compared with actual physical schema, suppose that we forget to apply some new table definitions, would it be the root cause? Do you know a way to compare the repository definitions against the physical schema? I think "apply all" is not an option..
    Thanks in advance

  • AdamSync from AD to LDS goes into a continuous never ending loop... can't figure this out.

    I THINK I've got this thing configured up to the point where it should be able to sync.  The XML config is set to just grab a single OU with roughly 12 accounts in it.
    Everything seems to connect OK, then it does a ton of "Processing Entry", even though there are only a few accounts in this OU.
    Then it begins to do "Adding target object..." and gets stuck in a never ending loop.
    Can someone point me in the right direction on how to troubleshoot this?
    This is what the log looks like:
    ==========================
    Adamsync.exe v1.0 (6)
    Establishing connection to target server localhost:6389.
    There is already an active sync session in progress. 
    Please allow the session to complete, or use -mai to seize the role.
    Saving Configuration File on CN=Test,DC=domain,DC=org
    Saved configuration file.
    ADAMSync is querying for a writeable replica of 10.10.10.10.
    Error: DCLocator call failed with error 1355. Attempting to bind directly to string.
    Establishing connection to source server 10.10.10.10:389.
    Using file .\dam9280.tmp as a store for deferred dn-references.
    Populating the schema cache
    Populating the well known objects cache
    Starting synchronization run from dc=domain,dc=org.
    Starting DirSync Search with object mode security.
    Processing Entry: Page 1, Frame 1, Entry 0, Count 0, USN 0
    Processing source entry <guid=94f6d930da2339439df75278a02accae>
    Previous entry took 0 seconds (0, 0) to process
    Processing Entry: Page 1, Frame 1, Entry 1, Count 1, USN 0
    Processing source entry <guid=bf15bc4b684ece4f99010548e79decb0>
    Previous entry took 0 seconds (0, 0) to process
    Processing Entry: Page 1, Frame 1, Entry 2, Count 1, USN 0
    Processing source entry <guid=fcea01637658134eab7ec74fe022d4fe>
    Previous entry took 0 seconds (0, 0) to process
    Processing Entry: Page 3, Frame 1, Entry 35, Count 1, USN 0
    Processing source entry <guid=5e768f4392863b4d86935e6bf01acc25>
    Previous entry took 0 seconds (0, 0) to process
    Processing Entry: Page 3, Frame 1, Entry 36, Count 1, USN 0
    Processing source entry <guid=b5d263a264aad045b8f42f19b49dd844>
    Previous entry took 0 seconds (16, 0) to process
    Processing Entry: Page 3, Frame 1, Entry 37, Count 1, USN 0
    Processing source entry <guid=f19994051c804846b7bcbd066d9e9d40>
    Previous entry took 0 seconds (0, 0) to process
    Processing Entry: Page 3, Frame 1, Entry 38, Count 1, USN 0
    Processing source entry <guid=b16cd765bafa4f4d8649d91f0f055e5f>
    Previous entry took 0 seconds (0, 0) to process
    Processing Entry: Page 3, Frame 1, Entry 39, Count 1, USN 0
    Processing source entry <guid=6be6a7d551978445aafd3803e60dc560>
    Processing in-scope entry 6be6a7d551978445aafd3803e60dc560.
    Adding target object CN=User Name,OU=Staff Accounts,OU=Users,OU=ITS,CN=Test,dc=domain,dc=org.
    Adding attributes: sourceobjectguid, instanceType, objectSid, sAMAccountName, lastagedchange, objectclass, 
    Adding target object CN=User Name,OU=Staff Accounts,OU=Users,OU=ITS,CN=Test,dc=domain,dc=org. Requesting replication of parent.
    Previous entry took 0 seconds (0, 0) to process
    Processing Entry: Page 3, Frame 2, Entry 0, Count 0, USN 53438354
    Processing source entry <guid=bbb4a760a8281741a11d9331efaa3d7a>
    Processing in-scope entry bbb4a760a8281741a11d9331efaa3d7a.
    Adding target object OU=Staff Accounts,OU=Users,OU=ITS,CN=Test,dc=domain,dc=org.
    Adding attributes: objectClass, instanceType, sourceobjectguid, lastagedchange, 
    Adding target object OU=Staff Accounts,OU=Users,OU=ITS,CN=Test,dc=domain,dc=org. Requesting replication of parent.
    Previous entry took 0 seconds (0, 0) to process
    Processing Entry: Page 3, Frame 3, Entry 0, Count 0, USN 52660067
    Processing source entry <guid=8d3ef319dff31f47819632af2da5df2c>
    Previous entry took 0 seconds (0, 0) to process
    Processing Entry: Page 3, Frame 2, Entry 0, Count 0, USN 53438354
    Processing source entry <guid=bbb4a760a8281741a11d9331efaa3d7a>
    Processing in-scope entry bbb4a760a8281741a11d9331efaa3d7a.
    Adding target object OU=Staff Accounts,OU=Users,OU=ITS,CN=Test,dc=domain,dc=org.
    Adding attributes: objectClass, instanceType, sourceobjectguid, lastagedchange, 
    Adding target object OU=Staff Accounts,OU=Users,OU=ITS,CN=Test,dc=domain,dc=org. Requesting replication of parent.
    Previous entry took 0 seconds (0, 0) to process
    Processing Entry: Page 3, Frame 3, Entry 0, Count 0, USN 52660067
    Processing source entry <guid=8d3ef319dff31f47819632af2da5df2c>
    Previous entry took 0 seconds (0, 0) to process
    ===================================================

    Hi,
    Are there any error messages from the event log?
    Here is a KB article which describes a similar issue below I suggest you refer to:
    Error message when you use the Adamsync tool in Windows Server 2003: "Error: We seem to be in an infinite recursive loop"
    http://support2.microsoft.com/kb/926933
    Best Regards,
    Amy

  • FCPX never ending transcoding after Mavericks?

    Hello folks,
    Saw some of the other threads about problems with FCPX and Mavericks.  Fortunately, everything has been fine for me... up to this point.  I didn't see this discussed yet so I figured I'd post my issue in it's own thread. 
    I've been trying to import some files (AVCHD) as usual for ongoing projects.  I copy the files and transcode them to optimized media.  Never had a problem before.  It seems to copy all the files fine, but seemingly never stops transcoding.  I've been trying to import two different projects... about 4-5 hours of footage each... and it's been two days now and the transcoding never ends!  Typically one such project takes about real time to import and transcode (4-5 hours, if not faster, never really timed it).  I'd begin an export in the morning and come back after lunch and it would always be done. 
    That is no longer the case it seems. 
    Has anyone else experience the same issue?  I just installed any and all updates available (nothing for FCPX however), restarted my computer and FCPX, and am trying again.  Hopefully the footage ingests fine this time.  But for the sake of losing more time and getting more frustrated, I'm hoping someone out there has a solution to this in the event the same problem persists for me.
    Any feedback would be appreciated.
    Matt

    Hi Russ,
    Thanks for taking the time to respond.  You've been extremely helpful in the past!   As an update... I started the import around 7pm last night (EST).  This morning, at 5am, it was still importing and transcoding... but it looked like it was at least working.  After restarting last night, I tried to import and transcode a single short clip before doing the full import and that was easily successful. 
    When I get to the import prompt, I only check off "Copy files to Final Cut Events folder" and "Create optimized media".   This workflow has been great for me.  I turn off background rendering and don't even render 2 hour long projects with heavily edited footage before exporting to m4v master files (which turn out just fine without the rendering).  That's beside the point though. 
    Back on track, when I open the Background Tasks, of course the transcoding is going.  The Importing Media is stuck on 99%.  Not sure if that's normal or not... never really paid attention to that in the past.   The Rendering says it's creating audio waveforms.  Again, not sure if that's normal or not. 
    In Activity Monitor, I might have found a problem.  It seems FCPX is only using around 0.5% of CPU during the import.  No other program is running really except for Activity Monitor, which would leapfrog FCPX in how much of the CPU it's using at time.  At the bottom, it says my computer is around 98-99% idle!  That all raises an eyebrow to say the least.  I'm not a computer whiz when it comes to the technical aspect of how my system might be performing and I have admittedly not tried an import on another machine yet (I have three iMac's).  So it may just be an issue with this one machine. 
    It's a 2011 model year running a 2.93 quad, i7.  At least I'm pretty sure of that.  I'm on a corporate event now typing away from another one of my iMac's and won't even know if the import and transcoding back at home is successful until I get back in tonight around 6:30 or so. 
    Even if it is, there's definitely something going on with how long it's taking.  What's typically a 4-5 hour process (est) was still ingesting 10 hours later. 

  • JAXB on a never-ending stream.

    Hi.
    Would it be considered possible to use JAXB to parse a never-ending stream of XML? For instance...
    <foo:foo xmlns="some:namespace">
        <bar> ... </bar>
        <bar> ... </bar>
        <bar> ... </bar>
        <bar> ... </bar>
        <bar> ... </bar>
        ... continues for eternity ...
    </foo:foo>Each time I parse a chunk I want to get one 'bar' element only. Namespaces dropped into 'foo' would have to correctly affect these individual documents, so simply consuming the first bit of the stream and asking it to parse multiple times is probably the wrong approach. :-)
    And of course somewhere I would need to output the damn things again, and again with correct namespaces. So maybe it is too hard afterall.

    I'm not sure if this is what crowse was suggesting, but you could potentially use a SAXParser to get the discreet <bar></bar> events and pump that to an Unmarshaller to return objects to you. You'll want to turn off validation on the Unmarshaller, since you've already been through that once with the SAXParser.
    If you're interested in parsing streaming XML using JAXB, another alternative is to alter your protocol so that your repeating element is a toplevel element. You can then prefix the element length to the XML. This should allow you to quickly find the end of the element without having to actively parse it. You can then feed that packet to the Unmarshaller.
    -S

  • My FaceTime doesn't work... I would call a person, they would accept, and then I would be stuck in a never ending "connecting".. And this problem has been according with not just my ipad, but with other people's iDevices that I know.

    My FaceTime doesn't work... I would call a person, they would accept, and then I would be stuck in a never ending "connecting".. And this problem has been according with not just my ipad, but with other people's iDevices that I know.
    -My wifi connection is running strong
    -All the devices run the same version of iOS

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Set Up Alert Sounds
    http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
    Extra FaceTime IDs
    http://tinyurl.com/k683gr4
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Fix Can’t Sign Into FaceTime or iMessage iOS 7
    http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
    http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457#19087457
    How to watch FaceTime calls on the big screen with Apple TV
    http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
    Send an iMessage as a Text Message Instead with a Quick Tap & Hold
    http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    How to Receive SMS Messages on an iPad
    http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
    Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • Never ending loading of Personal Hotspot on iPhone 4.?

    I am unable to activate Personal Hotspot on my iPhone 4 running iOS 5.0.1..
    First of all, personal hotspot is not showing in Settings tab.
    Secondly, in the Settings>General>Network, when i activate my cellular data plan. Then the persoanl hotspot feature appears but with a never ending loading sign. So i am unable to activate it even after activating my data plan...
    Please help me out ASAP..
    Thanks in advance..

    Well you can't connect to 2 networks at the same time. So just choose either or.

  • Updated my iPhone 5 to ios7, in the App store after installing updates I now have a never ending list of the Apps I've updated.  How do I get rid of the list after they've been updated?  In the previous version I did not have an annoying permanent list.

    Updated my iPhone 5 to ios7, in the App store after installing updates I now have a never ending list of the Apps I've updated.  How do I get rid of the list after they've been updated?  In the previous version I did not have an annoying permanent list.

    iOS 7 allows you to have your apps update automatically. Therefore, the list of what has been updated stays so that you can see what was updated, when and what the release notes say. It has been suggested that they list has a limit, much like Recents. Currently, there is no way for the user to delete the entries manually. Just try not to look at them.

  • Loading plsql_proxy.jar takes so long..never ends

    Hello people,
    I´m deploying a proxy cliente using command,
    jpub -u SCOTT/SCOTT -sysuser SCOTT/SCOTT -proxywsdl=any_wsdl -endpoint=any
    then the executing process stay in Load plsql_proxy.jar for a long time. it looks like never ends.
    plsql_wrapper.sql
    plsql_dropper.sql
    plsql_grant.sql
    plsql_revoke.sql
    Executing plsql_dropper.sql
    Executing plsql_wrapper.sql
    loading sqlj/lib/dbwsclient.jar (about 5 minutes)...
    Loading plsql_proxy.jar......................
    the execution process looks like stopped at this here and doesn´t throw any exception.
    I´ll be grateful the soon answer.
    Rodius
    anybody knows how long takes the proxy client generation process?

    I have this issue also, with images from my D70 (~6 megapixels) ... no solution, except that when it happens, quitting and re-launching Aperture seems to clear it up for a while, at least until it happens again.
    Given that you have almost twice the RAM and four times the CPU cores that I have, I suspect this is a software issue, and not one of insufficient hardware resources.  :-)

  • I printed a 'preview' document and now it continues to print a never ending set of copies.  I have re-installed the printer software, but it still continues to print more copies.  What do I need to do to stop the document printing?

    I printed a 'preview' document and now it continues to print a never ending set of copies.  I have re-installed the printer software, but it still continues to print more copies.  What do I need to do to stop the document printing?

    Try resetting the printing system.
    1. Open System Preferences > Print & Fax
    2. Move your mouse over the Printers list
    3. Hold down the Control button and click the mouse
    4. Click the "Reset printing system ..." popup
    5. Restart your Mac
    This will remove your print queues but not your printer drivers. So you will only need to add your printer queues again.

  • I created a new administrator USER account. I deleted the original one but the process never ends. It's been 3 days now.

    I created a new administrator USER account. I deleted the original one but the process never ends. It's been 3 days now. And I can't close preferences window or turn off the computer.
    It's stays in the "deleting" but I can't cancel it or close the window.
    What can I do?

    Here are two screen shots to show you what I am seeing.  The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as).  The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue).  However when I click on the user "Orion" nothing happens.  It will not change to highlight that user.

  • Mappings never ends

    Dear All,
    We are using 10.2 version of OWB and we have around 80 mappings in one module daily we are running the mappings parallel through control center for the time consuming (manually). but one mapping still running normally it takes 1:30 to 2:00 hrs time to finish but some times it is taken almost 5 to 6 hrs some times it never end. at that situation we stopped the mapping.but while we check the target table data is coming perfect.
    Let me know the cause of this and how to salve it.
    Thanks,

    Hi,
    When you kill the mapping from the Control Center the DB session which was triggered by mapping won't kill , you may see the session still running from Session Browser or any other way. This may be the reason you see the data in the Target table. to test this you may start regular running mapping and kill it from CC and observe the session from Database and you may see the data in the target table too.
    This may be one possibility. I am not saying what others say is wrong . I had experienced this issue before and i had to tune my code to get the mapping run consistent.
    Suresh

  • Error ORA-03127: no new operations allowed until the active operation ends

    I have a function that retrieves some values for all the cutomers
    with all different types,and then concatenates all those values
    (format in XML ) and return the concatenated value as clob.
    vClob1 & vAllClob is Clob type.
    My function:
    for recCustomer in CustCursor
    begin
    cust := recCustomer .name;
    vClob1 := ...;--(manipulated using select statement)
    for recType in TypeCursor
    begin
    typ := recType.value;
    vClob1 := vClob1 || ...;--(manipulated using select statement)
    end
    vAllClob := vAllClob || vClob1;
    vClob1:='';
    end
    executing ,it gives an error
    ORA-03127: no new operations allowed until the active operation ends
    if the statement
    vAllClob := vAllClob || vClob1;
    is commented it does not give an error
    The output of each vClob1 is got correctly as expected
    value of vClob1 when loop executed first time =
    {color:#c0c0c0}{color:#999999}&lt;WorkOrder&gt;
    &lt;CUSTOMER&gt;ABC&lt;/CUSTOMER&gt;
    &lt;NOOFWORKORDERS type="Planned"&gt;10&lt;/NOOFWORKORDERS&gt;
    &lt;NOOFWORKORDERS type="Preventive"&gt;22&lt;/NOOFWORKORDERS&gt;
    &lt;NOOFWORKORDERS type="Corrective"&gt;9&lt;/NOOFWORKORDERS&gt;
    &lt;NOOFWORKORDERS type="Implementation"&gt;5&lt;/NOOFWORKORDERS&gt;
    &lt;NOOFWORKORDERS type="Provisioning"&gt;46&lt;/NOOFWORKORDERS&gt;
    &lt;/WorkOrder&gt;{color}
    {color}
    at the next loop
    vClob1 =
    {color:#999999}&lt;WorkOrder&gt;
    &lt;CUSTOMER&gt;XYZ&lt;/CUSTOMER&gt;
    &lt;NOOFWORKORDERS type="Planned"&gt;17&lt;/NOOFWORKORDERS&gt;
    &lt;NOOFWORKORDERS type="Preventive"&gt;20&lt;/NOOFWORKORDERS&gt;
    &lt;NOOFWORKORDERS type="Corrective"&gt;37&lt;/NOOFWORKORDERS&gt;
    &lt;NOOFWORKORDERS type="Implementation"&gt;80&lt;/NOOFWORKORDERS&gt;
    &lt;NOOFWORKORDERS type="Provisioning"&gt;20&lt;/NOOFWORKORDERS&gt;
    &lt;/WorkOrder&gt;
    {color}
    and so on...
    My actual requirement is to concatenate all vClob1 values into a variable to pass
    it the front end to use it as an XMLDocument.
    Pls help.

    Did you try the create index from sqlplus?

  • My icalendar data is on a never ending importing how do I get it to stop?

    My icalendar is on a never ending importing how do I get it to stop!

    Items purchased in an account a permanently associated with that account.  You cannot split accounts nor merge them.  You can log in with your family account and download items that way.  In the long run though, especially if you are using other Apple devices, you may encounter problems with authorization.  You should look into making new purchases with your own ID.

Maybe you are looking for