Activation of duplicate check for vendor or customer account by matchcode

Hi,
Could you please me know how to do the activation of duplicate check for vendor as well as customer account by matchcode.
Many Thanks,
Panneer

solved

Similar Messages

  • Disable duplicate check for address in customer creation

    we use OE_HEADERS_IFACE_ALL, OE_LINES_IFACE_ALL, and OE_CUSTOMER_INFO_IFACE_ALL to upload sales order from third party system into OFS. For every sales order, we would like the system to create 1 new ship-to address and 1 new bill-to address.
    However, when the address has been created in OFS, subsequent creation of the address will fail with the following error message.
    Duplicate SHIP_TO ADDRESS found for SOSHMI003_S. Please correct the data.
    1) how can we disable to address duplicate checking.
    problem background
    Our third party system need to pass to OFS the customer info, address info and sales order info. For customer info, we can use the customer_number as reference key between 2 systems, so we can control if the customer already created in third party system (ie: created in OFS also), the third party system will not create the customer again.
    However, for address, there is no such a reference key that we can use, unless we are sending back the invoice_to_org_id and ship_to_org_id to the third party system, which we dun want. we want a one way data flow.
    please share us if you have a solution on this. many many thanks.

    Hi Ankur,
    please note that only duplicated IDs are being checked during the C4C data migration or migration simulation step.
    The system will not perform in the migration workbench the duplicate check logic which considers and weights the content of different fields of the customer (name, address, etc).
    Kind regards
    Bernd

  • VENDOR/GL/CUSTOMER  ACCOUNT STATEMENT WITH OPENING BALANCE

    Can anybody  tell me the tcodes in SAP for Vendor/Gl/Customer Account Statement with opening balance.
    Best Regards,
    Sudhanshu Dang
    0124-3081015

    hii
    As per my knowledge no such reports  for GL are there in sap.. we also had a same requirement but could not find it... we wanted reports with opening and closing balalnces...
    u can go to SAP1 and check all the standard reports available. check wheather any report fulfills ur need or else go for abap reports...
    Check f.42 T code for Vendor Report. and s_alr_87012172..for customer.
    thanks
    sejal

  • Duplicate check for non inventory vendor invoices in Finance

    Hi,
    SAP provides duplicate check for non inventory vendor invoices posted through transactions F-43 and FB01 etc. The field values checked for duplicate invoice include Document date and Reference field.
    I want to know, is there any flexibility of removing Document date from checking criteria?
    This is to facilitate picking more invoices in duplicate check net.
    Regards,
    Vijay

    Dear Vijay
    Yes, you can control this via business transaction events. Please review the below explanation.
    In Rel 4.6, duplicate invoices are checked using function module
    FI_DUPLICATE_INVOICE_CHECK which is called when invoices are posted via trans FB60.  Duplicate invoice checking criteria can be customized using the open FI interface SAMPLE_PROCESS_00001110 (custom function module) starting from Rel 4.6.  Please verify if the open FI interface 00001110 is being used in your system and review duplicate invoice selection criteria via trans BERP. You may wish to omit the document date (BLDAT field from the duplicate invoice check criteria to trigger error msg F5117.  In addition, table BSIP (vendor duplicate documents) may need to be updated.  (see note 114563 for further info).
    Please also check note 537213, and note 31771 for your information.
    If this helps please reward with points.
    Best Regards
    Kesav

  • Duplicate check for Contracts

    Dear Gurus,
    While creating Contracts, we would like to put a duplicate check for the Contracts. Currently, the system allows us to create a duplicate Contract for the same Vendor, Material, Validity period, etc.
    Please suggest if there is a way to handle this critical requirement.
    Awaiting your speedy response.
    Regards
    Ramu

    Hi
    As per SAP standard there is no check for duplicate contracts,
    But you can implement the check using the BAdi
    ME_PROCESS_OUT_CUST
    Typical applications for this BAdI include:
    Processing of own objects
    Processing of additional data on standard objects
    Implementation of additional validations and derivations
    Data changes in standard fields
    Change in field selection (also relevant to BAPIs)
    In the standard system, the BAdI is not active.
    The BAdI is filter-independent and can be used multiple times.
    The BAdI is released internally only
    In the implementation process, use the Methods
    PROCESS_HEADER
    PROCESS_ITEM
    Thanks & Regards
    Kishore

  • Fbl1n and fbl5n display at time line item wise name for vendor and customer

    Hi
    Could you tell me how can I include Customer or Vendor names for each line items in transaction FBL5N and FBL1N, please? Customer Accounts are displayed well, but in several cases we also need the name of the certain Customer or Vendor account names. This would be important for consolidation of customer accounts of the same customers.
    It is possible to include in these reports the u201EName1u201D, but they are empty in all cases. Could you tell me how it is possible to correct this problem, please?
    ysr

    hi YSR,
    See if you want to have the Vendor/ Customer name or number to be displayed when you execute it. I mean on the Vendor/Customer Line Item Display.
    THEN follow the below steps........
    After executing the FBL1N or FBL5N Click CTRL+F8 or Change Layout.  From the Pop screen select the Vendor from the Right side of the screen and then drag to the Left side of the screen, then click on Copy as.
    Then Save the Layout or CTRL F12, save the layout with the new name that you want.
    When you want this Layout as the default each and every time then u have to do 1 more step....
    After executing the same layout go the
    MENU> Settings>Layout-->Administration...
    there you select the layout that u have created and then set that layout as the Default settings Check mark on DS.
    So that each and every time when u execute it the same layout will be displayed with the fields that u have selected....
    Hope this will solve ur issue......
    Kumar........

  • Configuring double invoice check for vendor invoices posted through FB60

    Dear all
    Can anyone tell me how to configure double invoice check for vendor invoices posted through FB60.
    for miro documents..we can use Tcode OMRDC
    Is there any such tcode which can be used for configuring fi invoices for double checking..
    regards
    Expertia

    Dear Expertia,
    In FI,when checking for duplicated invoices, the system compares the
    following :Vendor, currency, company code, gross amount of the invoice,
    reference document number and Invoice document date.
    SAP Note 305201 clarifies this in a more details; please read it.
    The following fields must be identical for Duplicate invoice check
         Company code                              (BUKRS)
         Vendor number                             (LIFNR)
         Currency                                  (WAERS)
         Reference number                          (XBLNR)
         Amount in document currency               (WRBTR)
         Document date                             (BLDAT)
    If the document is having any one of the above filed different then the
    system does not consider it as a duplicate invoice.
    Also It will check duplicate invoice check in vendor master data and
    in posting key is there check box selected for sales related
    The setting you making in OMRDC i.e Materials management->Logistics
    Invoice Verification->Incoming Invoice ->Set Check for Duplicate
    Invoices is only valid for MM and not  FI invoices posted via FB60/FB65
    You should check the F1 help on field "Chk double inv." (LFB1-REPRF)
    in the relevant vendor master record (transaction FK03).
    Please also check, that message F5 117 has been set correctly in the
    IMG using this path:
    Financial Accounting -> Financial Accounting Global Settings ->
    Document -> Default Values for Document Processing -> Change Message
    Control for Document Control For Document Processing
    Finally & mainly, go to the relevant posting key is defined as sales
    related in transaction OB41. You have to flag this field if the
    duplicate invoice check should work.
    I hope this helps You.
    mauri

  • Printing confirmation of balance for vendors and customer-urgent

    Hi,
    Thanx Vamsi for the reply.
    I have got 1 more doubt.we are using CUSTOMISED correspondence types.The annexure we give has only the open items.But the users want a list of cleared items to appear in the list.
    Will the confirmation have only open items ???? or can it take even the cleared items along with it.Can the print program be modified to take even the cleared items along with it.
    Kindly advise.
    Thanks in advance
    Regards
    Karpagam

    Hi,
    We are using print program SAPF130K and SAPF130D for vendor and customer respectively.
    My query is can we bring even the cleared items alongwith the open items in the same print program???
    Now we have line items of open line items only?? As per our exploration into the program... we get only open items..
    Also we are using SAP10 and SAP11 as the correspondence type.Kindly advise as to correspondence type should be changed so that it can print both the open and cleared items?
    Please reply ASAP as it is very urgent.
    Thanks in advance.
    Regards
    Karpagam

  • Duplicate Check for Business Partners

    Hi,
    I was checking the Application COMM_CONTACT. When I create a new contact person, there is a duplicate check. When you want to create a new business partner of type person, the system raises an pop-up. This pop up appears when you want to create a new contact person of an company, which already exists.
    I would like to have this kind of functionality for the creation of an business partner of type organisation.
    Does any of you folks have an solution for that issue without an third party product.
    Or do you have any clue, why the explained problem on the top does not work with business partners (organizations), as it is working with business partners (person).
    Thanks in advance
    Stephan

    Hi
    goto Table:CRMV_BP_DCIFL and choose table =ADRC and required filed name at waht level you want to have Duplicate check for ORG and fill other relevant data as you filled for ADRP table entry
    Try this....
    Phani K

  • Duplicate check for Connection Objects in CRM

    Hi,
    I want to implement a duplicate check for connection objects in CRM. The duplicate check shall use the address of the connection object and perhaps additonal attributes. I have found a duplicate check for business partners using the basis address service and TREX as index pool. However, I couldn't find a similar functionality for connection objects. Does somebody know:
    1) How to implement a duplicate check for connection objects which is based on the address of the connection object?
    2) Is there a way to use the TREX-based duplicate check which is integrated into the basis address service for connection objects?
    Thanks in advance!
    Best regards,
    Frank

    I also have a requirement to check for duplicate address at connection object level and we are using SAP data servies to validate the address. Can anyone share their experience.

  • Can I use one Business Partner repository for Vendor and Customer?

    Can I use one Business Partner repository for Vendor and Customer? or do we have to use Vendor and Customer Repository separately. How can we do that? What are the pros and cons? can any one provide some examples:

    Hi Deepak
    The key purpose of SAP "enabling" the facility of multiple main tables in a repository is to primarily "manage" those master data objects that are related to each other. Typical examples will be a) Customer - Material, b) Supplier - Material, etc.
    While, it is pretty easy to add multiple main tables in a repository, it is also important to understand the purpose of doing so based on the business requirements.
    Besides, you got to be aware that in case you are "fixing" any issues with one main table (master data object) for which you have to unload the repository, the users will not be able to use the repository that has a main table defined for other master data object. Hence, there are pros and cons of using this capability of multiple main tables.
    So, it is really important to understand the "W's" - What, Why, When, Where, Who of Data modeling before actually working on the "H" - How to in the SAP MDM tool.
    Hope this helps.
    Regards
    Neelesh

  • 0FIGL_O02 - required to show vendor and customer Accounts also

    Hi all,
    Client is using one R/3 report "S_ALR_87012347" for G/L details. It shows them the G/L account, Vendor Account and Customer Account details but not their Names. So they asked me to create a report which shows the respective names as well in front of the Accounts.
    I used 0FIGL_O02 DSO with datasource 0FI_GL_4. All the details are coming fine. There is one problem.
    The datasource does not contain Vendor or Customer field. Hence when I execute my report, for a particular document number where there is Vendor or Customer Account it shows some number from T.code XK03.
    Where as according to the client here he wants to see the Vendor/Customer Number and Name.
    How do I link this G/L account Number field to display the Vendor/Customer Account wherever applicable in the report...?
    Thanks

    Hello,
    You could extend the datasource to include these fields, please see the information in the SAP note 410799.
    Best Regards,
    Des

  • Clear Vendor and Customer Accounts

    Hi,
    I want clear vendor and customer accounts those are in foreign currency or INR both. Please let me know which transaction code I use.
    Thanks & Regards,
    Hemant Maurya

    Hi
    there are two wyas for clear customer & vendor data
    1 Automatic clearing
    2.Mannual Clearing
    Vendor Mannual Clearing F-44
    Vendor Automatci clearing F.13
    Customer Manual Clearing F-32
    Customer Automatic Clearing F.13
    If any query, revert back
    Regards
    Roobal

  • CRM E-Commerce BOB Web shop - Duplicate check for New Customer Creation

    Hi,
    In CRM E-Commerce BOB Web shop we have a requirement wherein new customer creation should go through a duplicate check. Only unique customers should be created as BP in backend GUI, in case a customer already exists with the same credentials, BP should not be created and user should get a message that the customer already exist in the system.
    Currently the system is not preventing me from creating new customers with same credentials.
    In case anybody has worked on the similar requirement or has any idea about the same, Kindly help.
    Regards, Vipul
    Edited by: vipul_kumar02 on Jun 21, 2011 4:20 PM

    Hi,
    Any pointers for function module used for creation of a new BP for a new customer request in BOB Web shop?
    Is it same as B2C Web shop?

  • Rounding off differences for Vendor and Customer payment

    Dear All,
    Rounding off differences for vendor payment in T Code F-53 is giving the following error when I want to post.
    Item category 06000 not allowed in accounting transaction 1000/0001
    Message no. GLT2001
    Diagnosis
    The online document splitting is active in your system. Here, each document is assigned to a accounting transaction variant and each document row to an item category.
    You determine for each business transaction variant which item categories can or must be posted here.
    The following error occurred for the document you entered:
    Item category 06000 in accounting transaction 1000, variant 0001 is not allowed.
    System Response
    The document cannot be posted.
    Procedure
    Check the document entered, the derivation of the business transaction variant, the derivation of the item category, and the assignment of the item categories to the business transaction variant.
    Please advice
    Regards
    BIJUDAS

    Thx for the quick answer Andreas. n further discussions we found that the actual requirement is to only have the payment history data for both the vendor and the customer only as a referece. I mean they dont want to have the actual accounts posted for historical data, since we have to anyway have a conversion for the GL accounts related data afterwards.
    I hope i cleared what we want here. Do we have any way we can update the data in this case. Is there anyway we can have data stored in LIS possibly for such cases..
    Any ideas

Maybe you are looking for

  • R/3 report & BI report values getting different

    hi gurus, I am not getting proper values in both r/3 & Bi reports. both are not getting same. Bi i am using multiprovider with 1cube and ods. when i am searching r/3 report talling ods values and bi report tally with multiprovider values. what might

  • HT3704 change position of image in table

    How can I fine tune the position of an image in a table? I've got two documents. In one I can go to the inspector mode and presicely set the x and y value. Then I've got the other document, same image, and in the inspector mode, I can't set the x and

  • InDesign CS5 Previews in Bridge CS5?

    I have upgraded to CS5 and I have to do a "Save As" to get a preview of the document in Bridge. However, when I go back to it and open it again and close out, I get the CS5 icon instead of the preview. Is there a setting so that I don't have to do a

  • Why can't I answer a call with speaker on?

    iPhone 6; iOS 8.1. Generally when I'm at home I want to answer calls with the speaker on, but I don't see any way to do this [see note below]. Instead, I have to slide to answer, wait 1-3 seconds for the audio button to appear (bluetooth is enabled),

  • Bug in Firefox??

    Ever since yesterday when i'm in the firefox browser, sometimes the websites I'm on don't show up right. It looks like its in safemode or something and instead of the site being centered and organized, its all to the left and uneven. Does that make s