Activation of new data in ODS results in errors. Urgent.please help...

Dear experts,
I have a problem while I load data from one ODS object into another one. I have some keyfigs which when loaded into the ODS are ok. (I mean the new data is ok) but the moment I activate the request, the keyfigures are turned automatically to zero. This peculiar performance is not observed in any of our development and certification systems. Another thing, is that the data load is an initial load and there exists nothing in the change log table as well before the load.
Any thoughts are highly appreciated. Any SAP notes on this issue??? Please help... urgent...
Kind Regards,
Shravan

Hello Prasad/Rohini,
Thanks for helping me. Yes, I checked the update rules and they are ok. The problem is not with the update rules, I guess. I delete the data first in ODS 1 and from ODS2 I load the data into ODS1. The data load is an init update. After loading the data, before activating the request, The new data is all ok. The key figure data is all as that is guided by the corresponding update rules. The moment I activate the request, the active data is all wrong. My Question is why the table containing new data is correct and after not after activating???
Since it is an initial update, I do not think change log should come into picture???
Any ideas???
Kind Regards,
Shravan

Similar Messages

Date format Problem in OAF R12 Urgent Please help!!!

We have acustom application in OAF which was developed in 11i. Now we migrated the same to R12.
In this there are two date fileds getting dispayed on the page and the query for the same is
SELECT TO_CHAR (SYSDATE, 'dd-mm-yyyy') AS CURRENT_DATE, UPPER (TO_CHAR (SYSDATE - 10, 'mon-yy')) AS g_period, UPPER (TO_CHAR (SYSDATE + 5, 'mon-yy')) AS gnext_period, TO_CHAR (sysdate,'dd-mon-yyyy') as today_date, TO_CHAR (sysdate - 1,'dd-mon-yyyy') as yesterday_date FROM DUAL
In 11i version the output is dispaying correctly but in R12 the current date is dispayed as
Start Date 04-Nov-5242
End Date 04-Nov-5241
As per logic it should be
Start Date 09-Feb-2012
End Date 10-Feb-2012
Please help..Urgent issue.

Here are the answers to your problems :
1. Once u restart , the oracle services and the database is not mounting automatically.That is because, when you install the Oracle Oracle8i Standard Edition Release (8.1.7), the two key services namely
OracleOraHome81TNSListner and
OracleService<your SID name>
are configured as manual start ( check the NT --> start>setting>control panel>services. )
For the database to start automatically the next time you start your machine, these two services will have to be put into "Automatic Start" mode.
< for this double click on the respective service, select the "Automatic" radio button and click on ok>.
Now when you restart the machine, your database will be automatically mounted.
2. this as explained above is a corollory to the above problem. you can start or stop your database on NT using the "Services" window....
hope this helps.
bye.
Hi All,
I have installed Oracle Oracle8i Standard Edition Release (8.1.7) from technet site.
I have installed it on windows NT 4.0 .
Installation is fine.
I can access or get into SQL prompt .
I have created a database also.
1st problem
My problem is once I restart the Machine and try to access SQL plus .it gives me an error
ORA-01034: Oracle not available
ORA-27101: shared memory realm does not exist.
2nd problem
I dont know how to start and stop the database , as there is nothing to do that in the start menu of Oracle .
How do i do this .
This is very urgent please help.
regards,
Preeti

Date field to be set blank--Urgent --Please help

Hi All,
   We are running on SRM 4.0(classic scenario).On the SC screen,there is a date field called "Required on".By default this field is getting populated with the system date.
Now my reqt is that when the SC screen appears,i want this date field to be blank(not carry the system date)..The user will change the date whcih will flow to the next screen(Item level data-->std functionality)....
   I tried implementing this using the BADI BBP_DOC_CHANGE_BADI....but with this BADI,the date field can be changed to blank at the next screen..not at the first screen where this field gets populated by deafult with the system date where I want...
   In addition to this with this BADI,when i reset the field value to blank on the2nd(next ) screen,i get an error message(stating that the date field value is not carried over)...
Can anyone tel me how this date field is getting populated and how i can set this value to blank when the SC screen appears???Please help..
Thanks & regards,
Disha.

Hi Disha,
second message is normal: this is the std check on delivery date (here it is initial because of your mods).
first one semas to be related to the WF.
It could be deactivated via usual message control in SPRO.
1> I don't know this message
2> message BBP_PD 584 or 587
If you set this field as mandatory in the HTML template, maybe it would force the user to populate it before sending it to SRM SC item.
Rgds
Christophe
PS: please reward points for helpfull answers

Date Slider in Apex(dashboard) . Urgent Please help.

Hi ,
Need a date slider in Apex. I.e user will select the from_date and to_date please (note it is only select max 7 days window.)
Now i Need to display this user selected in the Slider . and when user slides to particular day the reports should run dynamically and display that particular days data.
Please help. reports and slider are in the same page.Your help is much appreciated.
Thanks

Hi Alan,
From_date and To_Date are datepicker items..
i need a slider to displays these values ..and pass them to report dynamically when user selects the slider...
Thanks
MSH

Problem in Activating from New data to Active data in DSO

Hi All,
For my DSO I am fetcdhing some fields from other DSO table , through END Routine ,. After running the DTP , I am getting data for the fileds which i am fetching through routine in New data Table.
After Activating the New data table to Active data table I cant able to see my data.
ie in Active data table there is no data for the fields which i am fetching through end routine after activating the request . One more thing my request is activated sucessfully.
it shows ready for reporting.
Please help me on this................................

Hi ,
After unchecking the checkboxes mentioned in my previous post and still if you dont find data in active table then I think the problem might be because of Database Statistics not being up-to-date for your ODS tables which causes a delay in data load completion process. You can try refreshing the Database Statistics of your ODS both tables and indexes (active data table, change log table and new data table). This probably may resolve your problem.
Srikanth.

I use iPhone 4S .earlier with ios 6 and now ios 6.while I connect the charger for charging my phone network lost while midway in charging.that problem always while 3G connection is active.but this problem not arise while 3G mode off.please help me.

I use iPhone 4S .earlier with ios 6 and now ios 6.while I connect the charger for charging my phone network lost while midway in charging.that problem always while 3G connection is active.but this problem not arise while 3G mode off.please help me.

reset all settings
settings-general-reset-reset all settings
now reconnect to wifi
settings- wifi- click network name- enter password - join
if issue persists back up and restore as new via iTunes
Peace, Clyde

Missing some master data for delta load( its very urgent please)

Hi,
I am working master data for delta load,the problem is when ever changes(SO) in r/3 RECORDS for address text,City Dstrct Nm.its not getting loaded into BW.every day some delta records are coming into BW.
the data coming thru bw satging and bw.Please help what would be reson and where can i find the detail info,where is it missing.Please see below for example.
Address Number/ Addr Ln 1 Txt/ City Dstrct Nm
9025750333/ #/ #
help me its very urgent

Hi Sumanth,
check the delta queue and the V3 job is it running correctly ,
Have a look at OSS note :728687
and also see the following thread
Deltas are not available in Delta que
Delta Queues are not cleared in R/3
No data in RSA7 for 2lis_03_bf : HELP
check the data may b it is in modifide status not active.
regards,
supriya

I have two iphone wich are protected by two different password ! but when i woke up today ! i'v found that my two iphone ( iphone 5 et iphone 4 ) refuse my passwords of 4 numbers i have important data and i dont want to lose please help me ! thank you !

i have two iphone wich are protected by two different password ! but when i woke up today ! i'v found that my two iphone ( iphone 5 et iphone 4 ) refuse my passwords of 4 numbers i have important data and i dont want to lose please help me ! thank you !

If you forgot (or don't know) your passcode, restore the device from backup on the last computer it was synced with when the passcode was turned on... this will remove the passcode. If you do not have access to the last computer it was synced with, or you don't have a backup, you will have to force it into recovery mode & restore as a new device.
See this for more info... http://support.apple.com/kb/HT1212

My ADE is having an activation server error. Please help.

My ADE is having an activation server error. Please help.

If due to some reason, you are unable to deauthorize ADE, follow the below steps:
Note: Try these steps only if you remember the password so that you can authorize ADE again
1.Go-> Go to folder.
Go to folder dialog will appear.
2. Type ~/Library/Application Support/Adobe/Digital Editions
drag the activation.dat file to the trash.
ADE will be deauthorized now.
Now Authorize ADE again.

I just bought a new iPhone and accidentally backed it up with my old iPhone backup, I do not want this. I lost everything on my new phone and I need it back. PLEASE HELP! This includes pictures and texts, etc.

I just bought a new iPhone and accidentally backed it up with my old iPhone backup, I do not want this. I lost everything on my new phone and I need it back. PLEASE HELP! This includes pictures and texts, etc.

So just to be clear, when you say "just bought" how long ago was that? Is it on this new iPhone that you had pictures, texts, etc that you want? Were you backing up to iCloud or onto iTunes?
This may not help for everything but if you go to iCloud.com and log in, are you able to find your pictures there?

Cannot install windows 7 on brand new mac mini with 256 g sdd? Please help.

Cannot install windows 7 on brand new mac mini with 256 g sdd? Please help.
Have tried all tricks found on the net and followed every advice from apple support.
Still black screen with blinking curser when mini is rebooting following partitioning via bootcamp.
Very nice and fast mashine, wouldnt like to return it.
thanks allan

Is that an Apple SSD?
what model is it?
Is there a firmware update if non Apple?
Lion is not server version.
Windows is ? ISO or retail?
Google macmini Windows 7 SSD Apple Boot Camp

After the IOS7 update, i can no longer use my imessage and facetime. It says "waiting for activation" and tried to log in on my apple id but it turned out to connection error. Please help me guys! Thank you.

After the IOS7 update, i can no longer use my imessage and facetime. It says "waiting for activation" and tried to log in on my apple id but it turned out to connection error. Please help me guys! Thank you.

Have you tried to reboot your phone(hold home and lock button simutainiously)?

HT3819 i have all my itunes on one computer and have brought another and need to transfure all my exsisting music to this new computer, how do i do this? please help.

I have all my itunes on one computer and have brought another and need to transfer all my music etc to new one, how do i do this? please help its doing my head in!

Hey allen72,
Thanks for the question. I understand you wish to transfer your iTunes library to a new computer. There are a few different options for doing so, the following article provides more information:
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
Thanks,
Matt M.

Encrypting and Decrypting Data(Its Very Urgent, Please Help.)

Hi,
Can anyone tell me some idea in the below mentioned details.
Iam creating a Function for Encrypting and Decrypting Data Values using
DBMS_OBFUSCATION_TOOLKIT with UTL_RAW.CAST_TO_RAW by using
Key Value as normal.
But the problem, is it possible to have the key value more than 8.
Its showing me error when i give the key value less than 8 or more than 8.
Can u tell me why it happens, is that the limit of the key value or is any other way to do that.
Its Very Urgent, Please Help.
Thanks,
Murali.V

Is this what you're looking for?
Usage Notes
If the input data or key given to the DES3DECRYPT procedure is empty, then the procedure raises the error ORA-28231 "Invalid input to Obfuscation toolkit."
If the input data given to the DES3DECRYPT procedure is not a multiple of 8 bytes, the procedure raises the error ORA-28232 "Invalid input size for Obfuscation toolkit." ORA-28233 is NOT applicable for the DES3DECRYPT function.
If the key length is missing or is less than 8 bytes, then the procedure raises the error ORA-28234 "Key length too short." Note that if larger keys are used, extra bytes are ignored. So a 9-byte key will not generate an exception.
C.

"Expected Ship Date: Not available at this time." Please help.

I ordered an iphone 6 plus gold at 12:01 AM PST. My email confirmation says "Deliver By: 09/19/2014". However, when I go to check the status of my order it says: "Expected Ship Date: Not available at this time." Please help. Thanks!
Please PM with details if possible. Thanks in advance!
Subject was edited by: Verizon Moderator

Hello JFull14. Making sure that your order is still on track is very important. By chance, has there been an update to your order status screen? http://vz.to/Ulymw6
If not, I have sent you a DM so we may help look into this.
NicandroN_VZW
Follow us on twitter @VZWSupport

Activation of new data in ODS results in errors. Urgent.please help...

Similar Messages

Maybe you are looking for