Activation problems with CS3 and PS6

I own CS3 standard edition for Windows. Recently I upgraded Photoshop only to CS6.
All works well with PS/CS6. However, when I go back to use CS3 applications, the programs won't run. In Acrobat - the program I'm trying to run now - I get the error "Adobe Acrobat 8.1.3 cannot be launched..." and am told to open another CS3 program. I tried that, only to be told my CS3 is no longer registered.
I got out the CS3 disks, entered the serial number, and am now told I have too many activations. This makes no sense at all, as I just removed CS3 from my laptop.
Can someone tell me how I can run my CS3 programs with PS/CS6? I cannot afford to update the whole suite; that's just not an option.
Thanks,
Ed B

Hi Ed B,
First, if I understand your initial question, you have two fully purchased licensed Adobe products: CS3 Standard and PS6.  Second, you had CS3 installed on your desktop and laptop…within Adobe is licensing agreement.  Third, when you began to experiencing problems, you uninstalled CS3 from your laptop and proceeded to reregister CS3 on your desktop—I can help you with that.
If you did not “deactivate” CS3 on your laptop prior to its uninstallation, it’s still showing as one of your two permissible registrations.  I ran into the same issue with CS5.5 after a rebuild.  I had to call Adobe licensing division and tell them what I did; they corrected my error on their part and I was good to go.  For future uninstalls:
fire up any CS3 app
click the Help button on the main menu
select “Deactivate”
then uninstall your product.
Now, as to PS3 and PS6 being on the same system…there’s no problem.  Just make sure that PS6 has its own/correct license number.  To check this is the same method as when you deactivate:
Open PS6
click Help button
select Activate and make sure the code displayed is correct, or put in the new product code. 
After that, you should be good to go.
Hope this helps.

Similar Messages

  • Problems with CS3 and Leopard

    Having a bit of a nightmare with Indesign and Photoshop CS3 since upgrading to Leopard. Running a Dual 2.5 GHz PowerPC G5 With 2GB DDR SDRAM. Anyone else having problems?

    Below is the Adobe Marketing Line (copied verbatim). It's what I was told by Adobe Sales and what I read at Adobe.com, FAQ, before buying CS3 in October 07. Imagine my surprise when I discovered all of the issues with CS3 and Leopard, even after the update to Acrobat 8.1.2 Professional which promised full compatibility (see chart at bottom).
    Apple and Adobe... ARGH.
    Oh yes, for all of the new suckers out there who are about to buy CS3 for their new Macs, the exact same FAQ is at Adobe.com, even now, Thursday, 12 Jun 2008.
    ADOBE CREATIVE SUTIE 3 Frequently Asked Questions
    Support for Mac OS X Leopard
    Q. Is Mac OS X Leopard (v10.5) important to Creative Suite 3 customers?
    A. Yes, Mac OS X Leopardthe latest version of Apples operating systemdelivers an elegant,
    productive new computing experience for creative professionals. Adobe and Apple have been
    collaborating closely for months to ensure that Adobe Creative Suite® 3 applications can run
    smoothly and reliably on Mac OS X Leopard. We are proud to support this impressive new
    operating system, and to ensure that our creative customers can take full advantage of the
    performance and value of using Creative Suite 3 applications and Mac OS X Leopard on
    Intel-based and PowerPC Macs.
    Q. Are Adobe Creative Suite 3 applications compatible with Mac OS X Leopard (v10.5)? If
    some are not fully compatible today, when will they be compatible?
    A. Thanks to close collaboration between Adobe and Apple, most of the CS3 applications and associated technologies, such as Adobe Bridge CS3, Version Cue CS3, and Device Central CS3, are compatible with Mac OS X Leopard without requiring additional updates. However, the following CS3 applications will require updates for full compatibility with Leopard: Adobe Acrobat 8 Professional and our professional video applications, including Adobe Premiere Pro CS3, After Effects CS3 Professional, Encore CS3, and Soundbooth CS3. We expect to publish free Leopard compatibility updates for the video applications in December 2007 and for Acrobat 8 Professional and Adobe Reader 8 in January 2008. For a complete overview of compatibility between Adobe creative applications and Mac OS X Leopard, see the chart on page 2 of this FAQ.
    Q. Will older versions of Adobe creative softwaresuch as Creative Suite 2 and
    Macromedia Studio 8 softwaresupport Mac OS X Leopard?
    A. While older Adobe applications may install and run on Mac OS X Leopard, they were
    designed, tested, and released to the public several years before this new operating system became available. You may, therefore, experience a variety of installation, stability, and reliability issues for which there is no resolution. Older versions of our creative software will not be updated to support Mac OS X Leopard. For a complete overview of compatibility between Adobe creative applications and Mac OS X Leopard, see the chart on page 2.
    Q. Will Adobe continue to test CS3 applications on Mac OS X Leopard?
    A. Yes. Adobe sets high standards of quality, stability, and reliability for our professional creative
    products, and we have worked closely with Apple to test Creative Suite 3 applications on both pre-release versions and the final shipping version of Mac OS X Leopard. While this testing showed that most CS3 applications perform well on Leopard (and that others run well but need updates for a few identified issues), we recognize that other issues may unexpectedly arise on any new operating system. We plan to continue testing and to monitor user experience closely to address any such issues. If you encounter any issues, please report them by going to www.adobe.com/misc/bugreport.html and clicking Report
    A Bug. Please note that we dont respond to submissions, but we do review them closely with the appropriate CS3 product teams.
    Q. Which CS3 applications will need patches to be compatible with Mac OS X Leopard?
    A. The following table summarizes compatibility between Adobe creative applications and Mac OS X Leopard. It notes which CS3 applications require updates for full Leopard compatibility and when Adobe expects to release those free updates.
    At A Glance: Mac OS X Leopard Compatibility
    ADOBE APPLICATION COMPATIBLE WITH REQUIRES UPDATE NOTES ABOUT
    Mac OS X Leopard For Mac OS X Leopard Compatibility
    Creative Suite 3 Design Premium ✔ Requires update to Acrobat 8.1.2
    Professional for full compatibility.
    Expected to be available
    in late January 2008.
    Creative Suite 3 Design Standard ✔ Requires update to Acrobat 8.1.2
    Professional for full compatibility.
    Expected to be available
    in late January 2008.
    Creative Suite 3 Web Premium ✔ Requires update to Acrobat 8.1.2
    Professional for full compatibility.
    Expected to be available
    in late January 2008.

  • Printing Problems with CS3 and Epson R1800

    Recently upgraded to CS3 and have now lost most printing options for Epson Stylus Photo R1800. Had no problems with CS2 running in Leopard. Anyone know what has happened?

    >"Unfortunately then I'd have to say all bets are off. The only true test is to print with the standard materials that Epson has designed their printer for. Only if that works well should you be trying third-party materials. For example, third-party inks in general are of poorer quality, are inconsistent, clog more, and in the long run, do not save you anywhere the amount of money they advertise over the genuine Epson products."
    Getting very nice results with an R1800, Inkjetfly CIS, and Red River paper. The R1800 has never had Epson ink run through it and has no abnormal clogging problems. In fact, clogs are rare.
    Getting near perfect matches to the monitor with both Colorvision and x-rite calibrating/profiling equipment. The printer stays on 24-7 so the only ink used, other than printing, is a periodic nozzle check. I am not alone in this, so blanket statements like the above are specious at best.
    And no, I don't sell prints for big bux, so whether they are going to last a hundred years is not a concern. Besides, until someone is around long enough to verify those claims, the jury is out. I've got color prints from the wet days that are fading after 20+ years. Third party inks are not necessarily lower quality than OEM. One of the reasons for the development of high quality third party inks was the dissatisfaction of B&W and fine art printers with the OEM products.
    Of course the cheap refilled/knockoff carts being hawked on ebay and the like are a different story.
    MBP, OS 10.4.11, CS3 10.0.1, R1800 with latest driver

  • Problems with CS3 and Epson 4800

    I am running Leopard on a Pro tower with CS3. I have a Dell laser printer along with a 4800. A few weeks ago, I set the Dell to be the default printer. All my prints on the Epson started coming out extremely flat, not matching my calibrated monitor at all. I finally set the 4800 to be the default printer and the prints looked normal again. No idea why that would happen. It baffles me. Driver conflict?
    However, I am still having two problems. First, when I soft proof, the soft proof screen looks nothing like the print. I am selecting the correct print profile in the Custom screen. The soft proof looks dark and weird.
    Second, the gamut warning is greyed out and unavailable to me, regardless of anything I try.
    Any ideas on what I am doing wrong or suggestions for fixes?
    Thanks

    Click on this link for an explanation of the printing issue:
    Eric Chan, "PS3 prints fine, PS4 prints too dark, same Mac" #12, 12 Dec 2008 6:07 am
    >Second, the gamut warning is greyed out and unavailable to me,
    Have you tried trashing preferences?

  • Mouse pointer Problem with CS3 and windows 7

    Upgraded
    to a new PC which has Windows 7(32bit) as an operating system. Installed my Photoshop CS3 and everything seems ok except when I magnify in the navagator panel. Once I zoom in my mouse pointer changes to 3 hands in the navigator panel. I powered up my old laptop which has Vista and my CS3
    then matched up the mouse settings in the control panel on the new PC. Used the same usb mouse on both PC's, the older Vista laptop worked fine but the windows 7 PC would get a tripple pointer in the navigation panel when I magnified. In the windows 7 laptop I then set the compatibility for Photoshop CS3 to run in XP mode but the problem did not clear. I see in FAQ for CS4 people have complained about tripple cursers in windows 7 but the replies indicated that the recommended fix did not work. Any help apreciated.
    Tom

    Thanks for your solution. I by changing the setting to 125% I am now able to use CS3 without tripple pointers.
    My eyesight is challenged so the decrease in text is a challenge but I can change the setting when I will use CS3 so I have a workarount.
    Thanks,
    Tom

  • Problems with CS3 and CS4 installations

    Hello, I have a problem when I install any product CS3 or CS4. When the program starts establishing, a window appears in the one that says " verifying the profile of the system " but the window being blocked always to 90 %. Does someone know the solution?
    Thank you.

    This is a fairly common problem.  Has to do with orphaned files on your system which have to be cleaned first up to make it work.  Use the search above and type in      installation fails at 90%.
    Here is one link.    http://forums.adobe.com/click.jspa?searchID=309763&objectType=2&objectID=883869

  • Problem with installation and activation

    Hi, I have a problem with the installation of Adobe Muse.
    I had a free 30-days trial, when it was over I bought the product ($ 13 per month), 
    I installed the program again and I see the same window with the finished Trials
    and it requires a serial number and does not allow to enter the program.
    I installed the program on your PC wife without any problems, but I can not install it on a laptop.
    I have a laptop with Windows 8 operating system.
    What I've done:
    1. Uninstalled the free program,
    2. check the connection to the Internet,
    3. has installed a new program from the official website adobe.com,
    4. Remove the line for the activation of the hosts file and resave the file,
    5. turned off the brandmower,
    6. rebooted.
    I can't get support for a 3 days, is it the most terrible support I've ever seen? I dunno
    Please help me at [email protected]

    I guess this stuff helps me
    http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    2014-08-07 20:07 GMT+07:00 Дмитрий Броский <[email protected]>:
    thanx
    >
    2014-08-07 18:18 GMT+07:00 Prabhakar.Kumar <[email protected]>:
        problem with installation and activation  created by Prabhakar.Kumar
    >> <https://forums.adobe.com/people/Prabhakar.Kumar> in *Help with using
    >> Adobe Muse CC* - View the full discussion
    >> <https://forums.adobe.com/message/6619532#6619532>
    >>

  • Hi - for any photo, info in mountain lion shows a different file size than Photoshop does. I've tested with CS3 and CS6 and get the same problem. Doesn't happen with CS3 and OSX10.4 or any previous versions of Photoshop and OSX. Anyone know why?

    Hi - for any photo, info in mountain lion shows a different file size than Photoshop does. I've tested with both CS3 and CS6 on 10.8.2 and get the same problem. This doesn't happen with CS3 and OSX10.4 or any previous versions of Photoshop and OSX. Anyone know why?

    this one is actually a really rare symptom of a flaky connection to the ipod on a Windows PC. there's more going on in terms of hardware on nanos and 5th gens than in the earlier models ... so if the connection is flaky to precisely the right/wrong degree, itunes will see the ipod, but misidentify it as an earlier version of ipod.
    tracking down the cause of the flakiness can be tricky ... as you already know ...
    just checking. have you tried connecting with a different (known-good) USB cable? does that seem to have any impact on the rate of occurence of the problem?

  • I think pesimo customer service three days, I'm looking for someone I can ayudr activation problem with my CC and can not find anyone who can help me.

    I think pesimo customer service three days, I'm looking for someone I can ayudr activation problem with my CC and can not find anyone who can help me.

    Online Chat Now button near the bottom for Activation and Deactivation problems may help
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

  • Problem with CS3 InCopy text files and InDesign CS5

    I have a large annual magazine that I am developing. There is one section that doesn't change much from year to year and I was hoping to grandfather in the InCopy text files from last year's edition. I've successfully used this strategy the past few years without issue. However, now when I try to check out those text files from last year, I receive the following message "This story needs to be coverted to "InCopy Document" format in order to edit it."
    I am running both InDesign CS5 and InCopy CS5 in SL 10.6.4. The previous year's magazine document was in CS3 InDesign format and the text files were in InCopy CS3. Is there some sort of compatibility issue? Is there a specific method for converting them so I can check them out in InDesign? I haven't attempted to check them out in InCopy CS5 yet but I will try that next. But I really need the ability to check out the content via InDesign too.
    Thanks in advance.
    Robert

    AFAIK, you're going to actually need to open the INCX files in InCopy and then resave them as ICML file. You can then relink them all in InDesign.
    Other choice is killing the InCopy links and then relinking everything.
    Best practice would be to finish any job started in CS3 with CS3 and then move to CS5 with new projects.
    Bob

  • Problems with Safari and Firefox (HTTP?)

    Problems with Safari and Firefox (HTTP?)
    On a laptop G4, 10.5.8 and Safari 5.02 I experience the following:
    On the account of my oldest daughter everything works fine, i.e. wireless internet works and no problems with mail or safari.
    On the same laptop, on the account of my other daughter, the wireless is OK, she can mail etc. But safari nor firefox works. It says: can’t find server (whatever site) and in the activity window it looks if safari tries to open files (in the safari preferences-folder) in stead of http. Same applies to Firefox, so maybe it has more to do with HTTP in general?
    What goes wrong? What to do? I tried the following on the host terminal (tips from Apple)
    defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false
    and
    defaults delete com.apple.safari WebKitDNSPrefetchingEnabled
    but that did not help,
    Nanne

    I'm still wondering why it happens now at this moment in time...
    PC does seem to be a bit odd & inconsistent, the few times I've tested with it, at least so far as we content filtering goes; and if I remember rightly, you're not the first to report previously ok settings suddenly preventing some or all internet until pc is switched off altogether.
    It may work when re-enabled

  • Problem with ADS and LDAP

    Problem with ADS and LDAP
    I have installed Win2000 + sp1 and ADS on a computer. This computer is PDC.
    After connection via LDAP I cann't get any object ( users or goups etc. ).
    I try connect to ADS by java ( JNDI ).
    When I use another clients of LDAP ( eg. Maxware Directory Explorer) I have
    the same problem - no objects.
    Can anybody help me?
    Grzegorz Pszona
    my e-mail: [email protected]

    Thanks a lot.
    Softerra's browser is really good.
    Thanks
    Rashmi
    "Anant Kadiyala" <[email protected]> wrote:
    >
    I used Softerra's LDAP browser. The browser is free. There is also a
    java baded
    LDAP browser from Univ of Michigan. I found the Softerra browser to be
    more easier
    to use.
    -anant
    "rashmi" <[email protected]> wrote:
    Hi,
    Can you please let me know which exact ADS tool that you used to examine
    the
    DN. I have Active Directory Users and Computers, Sites and Servicesand
    Domain
    and Trusts installed on my machine but I am not able to figure out how
    to get
    the DN?
    Thanks
    Rashmi
    for Stephen Davies <[email protected]> wrote:
    Grzegorz,
    I have had WLS6.1 & ADS working ok using LDAP V2. Mind you it did take
    a
    fair bit of messing around to get it going. MS does have a few oddities,
    for example the Administrators DN might look something like this:
    cn=Administrator,cn=Users,dc=eglobal,dc=net
    One tool that I found invaluable came with the additional support tools
    for Windows 2000. The 'Active Directory Administration Tool' made it
    easy to list the directory contents and examine the DNs.
    Regards,
    Steve
    Stephen Davies
    Principal Consultant
    eGlobal Services Pty. Ltd.
    Sydney, Australia
    Ph. +61 2 9283 1033
    http://www.eglobal.net/

  • Problem with dreamweaver and Flash

    Hi, maybe someone can help me, i have any problem with
    dreamweaver and flash, i have a page and i have a menu and
    sub-menu, and the same page i have a category en flash 550 x 700 (
    photography and more... ) but when the menu to unfold
    the menu to see under flash and it cant see ( sorry my
    english is bad.... i hope you can understand me, and help me.. )
    i dont now why always flash ever stay up, or first, and
    another information under flash... this a problem... if you have
    menus...
    thanks.... have nice day.....

    This is a drawback of using flash or any other active
    content. By default, all active content including flash will
    display over every other content and thats why your menu stays
    under the flash movie. Some people make the flash background
    transparent to show content under the flash movie, but that will
    not work for menu items.
    I would suggest that you make the menu such that it does not
    overlap with the flash movie.

  • Problem with axis2 and Tomcat

    Hello,
    I am having a strange problem with Tomcat and axis. I have a webservice that uses axis2 for wsdl2java class generation. When I compile my project in maven a Test is performed. During the test a glassfish server is established and the project is deployed -everything work great with the expected results. However when I try to deploy the webservice on tomcat it has some problems.
    At first I tried to call axis code in a POST method that takes a MultiPart message. The code is as below:
    *@Path("identifyWavestream")*
    *@POST*
    *@Consumes(MediaType.MULTIPART_FORM_DATA)*
    *@Produces(MediaType.APPLICATION_XML)*
    *public String multipartTest(com.sun.jersey.multipart.MultiPart multiPart) throws Exception {* 
    *// get first body part (index 0)*
    *//tomcat shows that the first error is here (line 122 is the nest one with bodypart)*
    BodyPart bp = multiPart.getBodyParts().get(0);
    BodyPartEntity bodyPartEntity = (BodyPartEntity) bp.getEntity();
    InputStream stream = bodyPartEntity.getInputStream();
    *//the rest of the code either saves the incoming file or implements the wsdl2java axis interface - neither works.*
    And the tomcat error is:
    java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
    java.util.ArrayList.RangeCheck(Unknown Source)
    java.util.ArrayList.get(Unknown Source)
    com.webserv.rest.resources.SearchResource.test.multipartTest(SearchResource.java:122)
    sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    java.lang.reflect.Method.invoke(Unknown Source)
    com.sun.jersey.server.impl.model.method.dispatch.EntityParamDispatchProvider$TypeOutInvoker._dispatch(EntityParamDispatchProvider.java:138)
    com.sun.jersey.server.impl.model.method.dispatch.ResourceJavaMethodDispatcher.dispatch(ResourceJavaMethodDispatcher.java:67)
    com.sun.jersey.server.impl.uri.rules.HttpMethodRule.accept(HttpMethodRule.java:124)
    com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:111)
    com.sun.jersey.server.impl.uri.rules.ResourceClassRule.accept(ResourceClassRule.java:71)
    com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:111)
    com.sun.jersey.server.impl.uri.rules.RootResourceClassesRule.accept(RootResourceClassesRule.java:63)
    com.sun.jersey.server.impl.application.WebApplicationImpl._handleRequest(WebApplicationImpl.java:555)
    com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:514)
    com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:505)
    com.sun.jersey.spi.container.servlet.ServletContainer.service(ServletContainer.java:359)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:729)
    It was strange to me since this simple approach of handling a Multipart method worked for me earlier. Then I decided skip the handling of multipart method and just call the axis code. But the results also caused an error. I then tried to call the axis code in a simple @GET method (to cross out any issues regarding the multipart) and the result where the same. Again everything works on the maven- glassfish test. In this case the tomcat error is the following:
    javax.servlet.ServletException: java.lang.NoSuchMethodError: org.apache.commons.httpclient.HttpConnectionManager.getParams()Lorg/apache/commons/httpclient/params/HttpConnectionManagerParams;
    com.sun.jersey.spi.container.servlet.ServletContainer.service(ServletContainer.java:361)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:729)
    root cause
    com.sun.jersey.api.container.MappableContainerException: java.lang.NoSuchMethodError: org.apache.commons.httpclient.HttpConnectionManager.getParams()Lorg/apache/commons/httpclient/params/HttpConnectionManagerParams;
    com.sun.jersey.server.impl.model.method.dispatch.ResourceJavaMethodDispatcher.dispatch(ResourceJavaMethodDispatcher.java:74)
    com.sun.jersey.server.impl.uri.rules.HttpMethodRule.accept(HttpMethodRule.java:124)
    com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:111)
    com.sun.jersey.server.impl.uri.rules.ResourceClassRule.accept(ResourceClassRule.java:71)
    com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:111)
    com.sun.jersey.server.impl.uri.rules.RootResourceClassesRule.accept(RootResourceClassesRule.java:63)
    com.sun.jersey.server.impl.application.WebApplicationImpl._handleRequest(WebApplicationImpl.java:555)
    com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:514)
    com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:505)
    com.sun.jersey.spi.container.servlet.ServletContainer.service(ServletContainer.java:359)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:729)
    root cause
    java.lang.NoSuchMethodError: org.apache.commons.httpclient.HttpConnectionManager.getParams()Lorg/apache/commons/httpclient/params/HttpConnectionManagerParams;
    org.apache.axis2.transport.http.AbstractHTTPSender.initializeTimeouts(AbstractHTTPSender.java:454)
    org.apache.axis2.transport.http.AbstractHTTPSender.getHttpClient(AbstractHTTPSender.java:514)
    org.apache.axis2.transport.http.HTTPSender.sendViaPost(HTTPSender.java:156)
    org.apache.axis2.transport.http.HTTPSender.send(HTTPSender.java:75)
    org.apache.axis2.transport.http.CommonsHTTPTransportSender.writeMessageWithCommons(CommonsHTTPTransportSender.java:371)
    org.apache.axis2.transport.http.CommonsHTTPTransportSender.invoke(CommonsHTTPTransportSender.java:209)
    org.apache.axis2.engine.AxisEngine.send(AxisEngine.java:448)
    org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:401)
    org.apache.axis2.description.OutInAxisOperationClient.executeImpl(OutInAxisOperation.java:228)
    org.apache.axis2.client.OperationClient.execute(OperationClient.java:163)
    com.webserv.rest.webapp.IntSoapServiceStub.getServerData(IntSoapServiceStub.java:2447)
    com.webserv..rest.resources.AIntSoapImpl.getServerData(AIntSoapImpl.java:112)
    com.webserv..rest.resources.SearchResource.test.pingTest(SearchResource.java:167)
    sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    java.lang.reflect.Method.invoke(Unknown Source)
    com.sun.jersey.server.impl.model.method.dispatch.EntityParamDispatchProvider$TypeOutInvoker._dispatch(EntityParamDispatchProvider.java:138)
    com.sun.jersey.server.impl.model.method.dispatch.ResourceJavaMethodDispatcher.dispatch(ResourceJavaMethodDispatcher.java:67)
    com.sun.jersey.server.impl.uri.rules.HttpMethodRule.accept(HttpMethodRule.java:124)
    com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:111)
    com.sun.jersey.server.impl.uri.rules.ResourceClassRule.accept(ResourceClassRule.java:71)
    com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:111)
    com.sun.jersey.server.impl.uri.rules.RootResourceClassesRule.accept(RootResourceClassesRule.java:63)
    com.sun.jersey.server.impl.application.WebApplicationImpl._handleRequest(WebApplicationImpl.java:555)
    com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:514)
    com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:505)
    com.sun.jersey.spi.container.servlet.ServletContainer.service(ServletContainer.java:359)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:729)
    I think it is also a good ide to post the pom.xml file :
    Edited by: 803864 on 2010-10-21 00:30

    I think it is also a good ide to post the pom.xml file:
    +<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"+
    xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd">
    +<modelVersion>4.0.0</modelVersion>+
    +<groupId>com.myProjects</groupId>+
    +<artifactId>audioid-rest-interface</artifactId>+
    +<packaging>war</packaging>+
    +<name>AudioID Rest Interface</name>+
    +<version>0.1</version>+
    +<dependencies>+
    +<!--+
    +<dependency>+
    +<groupId>com.sun.tools.xjc.maven2</groupId>+
    +<artifactId>maven-jaxb-plugin</artifactId>+
    +<version>1.1</version>+
    +<scope>test</scope>+
    +</dependency>+
    +<dependency>+
    +<groupId>com.sun.jersey</groupId>+
    +<artifactId>jersey-client</artifactId>+
    +<version>1.0.1</version>+
    +</dependency>+
    +<dependency>+
    +<groupId>com.sun.jersey.contribs</groupId>+
    +<artifactId>jersey-multipart</artifactId>+
    +<version>1.0.1</version>+
    +</dependency>+
    +<dependency>+
    +<groupId>com.sun.grizzly</groupId>+
    +<artifactId>grizzly-servlet-webserver</artifactId>+
    +<version>1.9.0</version>+
    +<scope>test</scope>+
    +</dependency>-->+
    +<dependency>+
    +<groupId>com.sun.jersey.contribs</groupId>+
    +<artifactId>jersey-multipart</artifactId>+
    +<version>1.0.1</version>+
    +</dependency>+
    +<dependency>+
    +<groupId>com.sun.jersey</groupId>+
    +<artifactId>jersey-client</artifactId>+
    +<version>1.0.1</version>+
    +</dependency>+
    +<dependency>+
    +<groupId>com.sun.jersey</groupId>+
    +<artifactId>jersey-bundle</artifactId>+
    +<version>1.0.1</version>+
    +</dependency>+
    +<dependency>+
    +<groupId>commons-logging</groupId>+
    +<artifactId>commons-logging</artifactId>+
    +<version>1.0.4</version>+
    +</dependency>+
    +<dependency>+
    +<groupId>commons-collections</groupId>+
    +<artifactId>commons-collections</artifactId>+
    +<version>3.1</version>+
    +</dependency>+
    +<dependency>+
    +<groupId>org.slf4j</groupId>+
    +<artifactId>slf4j-log4j12</artifactId>+
    +<version>1.5.6</version>+
    +</dependency>+
    +<dependency>+
    +<groupId>junit</groupId>+
    +<artifactId>junit</artifactId>+
    +<version>3.8.2</version>+
    +<scope>test</scope>+
    +</dependency>+
    +<dependency>+
    +<groupId>org.glassfish.distributions</groupId>+
    +<artifactId>web-all</artifactId>+
    +<version>10.0-build-20080430</version>+
    +<scope>test</scope>+
    +</dependency>+
    +<dependency>+
    +<groupId>org.glassfish.embedded</groupId>+
    +<artifactId>gf-embedded-api</artifactId>+
    +<version>1.0-alpha-4</version>+
    +<scope>test</scope>+
    +</dependency>+
    +<dependency>+
    +<groupId>com.sun.jersey</groupId>+
    +<artifactId>jersey-server</artifactId>+
    +<version>1.0.3.1</version>+
    +<scope>test</scope>+
    +</dependency>+
    +<dependency>+
    +<groupId>com.sun.jersey.contribs</groupId>+
    +<artifactId>maven-wadl-plugin</artifactId>+
    +<version>1.0.3.1</version>+
    +</dependency>+
    +<dependency>+
    +<groupId>org.hibernate</groupId>+
    +<artifactId>hibernate</artifactId>+
    +<version>3.2.5.ga</version>+
    +<exclusions>+
    +<exclusion>+
    +<groupId>javax.transaction</groupId>+
    +<artifactId>jta</artifactId>+
    +</exclusion>+
    +<exclusion>+
    +<groupId>cglib</groupId>+
    +<artifactId>cglib</artifactId>+
    +</exclusion>+
    +</exclusions>+
    +</dependency>+
    +<dependency>+
    +<groupId>org.apache.axis2</groupId>+
    +<artifactId>axis2</artifactId>+
    +<version>1.4.1</version>+
    +</dependency>+
    +<!-- <dependency> -->+
    +<dependency>+
    +<groupId>org.apache.axis2</groupId>+
    +<artifactId>axis2-aar-maven-plugin</artifactId>+
    +<version>1.4.1</version>+
    +<scope>test</scope>+
    +</dependency>+
    +<dependency>+
    +<groupId>org.apache.axis2</groupId>+
    +<artifactId>axis2-java2wsdl</artifactId>+
    +<version>1.4.1</version>+
    +<scope>test</scope>+
    +</dependency>+
    +<dependency>+
    +<groupId>org.apache.axis2</groupId>+
    +<artifactId>axis2-xmlbeans</artifactId>+
    +<version>1.4.1</version>+
    +</dependency>+
    +<!-- <dependency> -->+
    +<dependency>+
    +<groupId>com.sun.xml.bind</groupId>+
    +<artifactId>jaxb-impl</artifactId>+
    +<version>2.1.12</version>+
    +</dependency>+
    +<dependency>+
    +<groupId>cglib</groupId>+
    +<artifactId>cglib-nodep</artifactId>+
    +<version>2.1_3</version>+
    +</dependency>+
    +</dependencies>+
    +<build>+
    +<finalName>audioid-rest-interface</finalName>+
    +<plugins>+
    +<plugin>+
    +<!-- This class is just generated for wadl support!!! -->+
    +<!-- Take care that folder ../music-dna-core is existing -->+
    +<groupId>com.sun.tools.xjc.maven2</groupId>+
    +<artifactId>maven-jaxb-plugin</artifactId>+
    +<version>1.1</version>+
    +<executions>+
    +<execution>+
    +<phase>generate-sources</phase>+
    +<goals>+
    +<goal>generate</goal>+
    +</goals>+
    +</execution>+
    +</executions>+
    +<configuration>+
    +<generatePackage> com.webserv.wsparameters</generatePackage>+
    +<schemaDirectory>../audioid-rest-interface/src/main/resources+
    +</schemaDirectory>+
    +<includeSchemas>+
    +<includeSchema>**/*.xsd</includeSchema>+
    +</includeSchemas>+
    +<extension>true</extension>+
    +<strict>false</strict>+
    +<verbose>false</verbose>+
    +</configuration>+
    +</plugin>+
    +<plugin>+
    +<groupId>org.apache.maven.plugins</groupId>+
    +<artifactId>maven-javadoc-plugin</artifactId>+
    +<!-- <version>2.6</version> -->+
    +<executions>+
    +<execution>+
    +<goals>+
    +<goal>javadoc</goal>+
    +</goals>+
    +<phase>compile</phase>+
    +</execution>+
    +</executions>+
    +<configuration>+
    +<encoding>UTF-8</encoding>+
    +<verbose>false</verbose>+
    +<show>public</show>+
    +<subpackages> com.webserv.rest.rest.resources: com.webserv.rest.rest.commons: com.webserv.wsparameters+
    +</subpackages>+
    +<doclet>com.sun.jersey.wadl.resourcedoc.ResourceDoclet</doclet>+
    +<docletPath>${path.separator}${project.build.outputDirectory}+
    +</docletPath>+
    +<docletArtifacts>+
    +<docletArtifact>+
    +<groupId>com.sun.jersey.contribs</groupId>+
    +<artifactId>wadl-resourcedoc-doclet</artifactId>+
    +<version>1.0.3.1</version>+
    +</docletArtifact>+
    +<docletArtifact>+
    +<groupId>com.sun.jersey</groupId>+
    +<artifactId>jersey-server</artifactId>+
    +<version>1.0.3.1</version>+
    +</docletArtifact>+
    +<docletArtifact>+
    +<groupId>xerces</groupId>+
    +<artifactId>xercesImpl</artifactId>+
    +<version>2.6.1</version>+
    +</docletArtifact>+
    +</docletArtifacts>+
    +<additionalparam>-output+
    +${project.build.outputDirectory}/resourcedoc.xml</additionalparam>+
    +<useStandardDocletOptions>false</useStandardDocletOptions>+
    +</configuration>+
    +</plugin>+
    +<plugin>+
    +<groupId>com.sun.jersey.contribs</groupId>+
    +<artifactId>maven-wadl-plugin</artifactId>+
    +<version>1.0.3.1</version>+
    +<executions>+
    +<execution>+
    +<id>generate</id>+
    +<goals>+
    +<goal>generate</goal>+
    +</goals>+
    +<phase>compile</phase>+
    +</execution>+
    +</executions>+
    +<configuration>+
    +<wadlFile>${project.build.outputDirectory}/application.wadl+
    +</wadlFile>+
    +<formatWadlFile>true</formatWadlFile>+
    +<baseUri>http://192.168.2.149:8080/${project.build.finalName}+
    +</baseUri>+
    +<packagesResourceConfig>+
    +<param> com.webserv.rest.resources</param>+
    +</packagesResourceConfig>+
    +<wadlGenerators>+
    +<wadlGeneratorDescription>+
    +<className>com.sun.jersey.server.wadl.generators.WadlGeneratorApplicationDoc+
    +</className>+
    +<properties>+
    +<property>+
    +<name>applicationDocsFile</name>+
    +<value>${basedir}/src/main/doc/application-doc.xml</value>+
    +</property>+
    +</properties>+
    +</wadlGeneratorDescription>+
    +<wadlGeneratorDescription>+
    +<className>com.sun.jersey.server.wadl.generators.WadlGeneratorGrammarsSupport+
    +</className>+
    +<properties>+
    +<property>+
    +<name>grammarsFile</name>+
    +<value>${basedir}/src/main/doc/application-grammars.xml</value>+
    +</property>+
    +</properties>+
    +</wadlGeneratorDescription>+
    +<wadlGeneratorDescription>+
    +<className>com.sun.jersey.server.wadl.generators.resourcedoc.WadlGeneratorResourceDocSupport+
    +</className>+
    +<properties>+
    +<property>+
    +<name>resourceDocFile</name>+
    +<value>${project.build.outputDirectory}/resourcedoc.xml</value>+
    +</property>+
    +</properties>+
    +</wadlGeneratorDescription>+
    +</wadlGenerators>+
    +</configuration>+
    +</plugin>+
    +<plugin>+
    +<groupId>org.codehaus.mojo</groupId>+
    +<artifactId>exec-maven-plugin</artifactId>+
    +<version>1.1</version>+
    +<executions>+
    +<execution>+
    +<goals>+
    +<goal>java</goal>+
    +</goals>+
    +</execution>+
    +</executions>+
    +<configuration>+
    +<mainClass>com.sun.jersey.samples.generatewadl.Main</mainClass>+
    +</configuration>+
    +</plugin>+
    +<plugin>+
    +<groupId>org.apache.maven.plugins</groupId>+
    +<artifactId>maven-compiler-plugin</artifactId>+
    +<inherited>true</inherited>+
    +<configuration>+
    +<source>1.5</source>+
    +<target>1.5</target>+
    +<!--+
    exclude temporary types that are only needed for wadl and doc
    generation
    -->
    +<!--+
    +<excludes> <exclude>com/webserv/types/temporary/**</exclude>+
    +<exclude>com/webserv/rest/commons/Examples.java</exclude>+
    +</excludes>+
    -->
    +</configuration>+
    +</plugin>+
    +<plugin>+
    +<groupId>org.jvnet.jaxb2.maven2</groupId>+
    +<artifactId>maven-jaxb2-plugin</artifactId>+
    +<executions>+
    +<execution>+
    +<goals>+
    +<goal>generate</goal>+
    +</goals>+
    +</execution>+
    +</executions>+
    +</plugin>+
    +<plugin>+
    +<groupId>org.apache.axis2</groupId>+
    +<artifactId>axis2-wsdl2code-maven-plugin</artifactId>+
    +<version>1.4.1</version>+
    +<executions>+
    +<execution>+
    +<id>generate reco core</id>+
    +<goals>+
    +<goal>wsdl2code</goal>+
    +</goals>+
    +<configuration>+
    +<packageName>com.webserv.rest.webapp</packageName>+
    +<wsdlFile>src/main/java/com/webserv/wsdl/web.wsdl</wsdlFile>+
    +<databindingName>adb</databindingName>+
    +</configuration>+
    +</execution>+
    +</executions>+
    +</plugin>+
    +<plugin>+
    +<groupId>com.sun.tools.xjc.maven2</groupId>+
    +<artifactId>maven-jaxb-plugin</artifactId>+
    +<version>1.1</version>+
    +<executions>+
    +<execution>+
    +<goals>+
    +<goal>generate</goal>+
    +</goals>+
    +</execution>+
    +</executions>+
    +<configuration>+
    +<generatePackage>com.webserv.wsparameters</generatePackage>+
    +<schemaDirectory>src/main/xsd</schemaDirectory> <includeSchemas>+
    +<includeSchema>**/*.xsd</includeSchema> </includeSchemas>+
    +<extension>true</extension>+
    +<strict>false</strict>+
    +<verbose>true</verbose>+
    +</configuration>+
    +</plugin>+
    +</plugins>+
    +</build>+
    +<profiles>+
    +<profile>+
    +<id>jdk-1.5</id>+
    +<activation>+
    +<jdk>1.5</jdk>+
    +</activation>+
    +<dependencies>+
    +<dependency>+
    +<groupId>com.sun.xml.bind</groupId>+
    +<artifactId>jaxb-impl</artifactId>+
    +<version>2.1.10</version>+
    +</dependency>+
    +</dependencies>+
    +<build>+
    +<plugins>+
    +<plugin>+
    +<groupId>org.apache.maven.plugins</groupId>+
    +<artifactId>maven-javadoc-plugin</artifactId>+
    +<configuration>+
    +<docletArtifacts>+
    +<docletArtifact>+
    +<groupId>com.sun.jersey.contribs</groupId>+
    +<artifactId>maven-wadl-plugin</artifactId>+
    +<version>1.0.3.1</version>+
    +</docletArtifact>+
    +<docletArtifact>+
    +<groupId>com.sun.jersey.contribs</groupId>+
    +<artifactId>wadl-resourcedoc-doclet</artifactId>+
    +<version>1.0.3.1</version>+
    +</docletArtifact>+
    +<docletArtifact>+
    +<groupId>com.sun.jersey</groupId>+
    +<artifactId>jersey-server</artifactId>+
    +<version>1.0.3.1</version>+
    +</docletArtifact>+
    +<docletArtifact>+
    +<groupId>xerces</groupId>+
    +<artifactId>xercesImpl</artifactId>+
    +<version>2.6.1</version>+
    +</docletArtifact>+
    +<docletArtifact>+
    +<groupId>javax.xml.bind</groupId>+
    +<artifactId>jaxb-api</artifactId>+
    +<version>2.1</version>+
    +</docletArtifact>+
    +<docletArtifact>+
    +<groupId>javax.xml</groupId>+
    +<artifactId>jaxb-impl</artifactId>+
    +<version>2.1</version>+
    +</docletArtifact>+
    +<docletArtifact>+
    +<groupId>javax.activation</groupId>+
    +<artifactId>activation</artifactId>+
    +<version>1.1</version>+
    +</docletArtifact>+
    +<docletArtifact>+
    +<groupId>javax.xml.stream</groupId>+
    +<artifactId>stax-api</artifactId>+
    +<version>1.0</version>+
    +</docletArtifact>+
    +</docletArtifacts>+
    +</configuration>+
    +</plugin>+
    +</plugins>+
    +</build>+
    +</profile>+
    +<profile>+
    +<id>xsltproc</id>+
    +<activation>+
    +<file>+
    +<exists>../xsltproc_win32/xsltproc.exe</exists>+
    +</file>+
    +</activation>+
    +<build>+
    +<plugins>+
    +<!-- Create/generate the application.html using xsltproc -->+
    +<!-- Create/generate the application.html using xsltproc -->+
    +<plugin>+
    +<groupId>org.codehaus.mojo</groupId>+
    +<artifactId>exec-maven-plugin</artifactId>+
    +<version>1.1</version>+
    +<executions>+
    +<execution>+
    +<id>copy-docs-to-builddir</id>+
    +<goals>+
    +<goal>exec</goal>+
    +</goals>+
    +<phase>compile</phase>+
    +<configuration>+
    +<executable>copy</executable>+
    +<commandlineArgs>src\\main\\doc\\*.* target\\classes+
    +</commandlineArgs>+
    +</configuration>+
    +</execution>+
    +<execution>+
    +<id>prepare-xsltproc</id>+
    +<goals>+
    +<goal>exec</goal>+
    +</goals>+
    +<phase>package</phase>+
    +<configuration>+
    +<executable>copy</executable>+
    +<commandlineArgs>..\\audioid-rest-interface\\src\\main\\resources\\*.xsd+
    target\\classes</commandlineArgs>
    +</configuration>+
    +</execution>+
    +<execution>+
    +<id>exec-xsltproc: target/application.html</id>+
    +<goals>+
    +<goal>exec</goal>+
    +</goals>+
    +<phase>package</phase>+
    +<configuration>+
    +<!--<executable>xsltproc</executable>-->+
    +<executable>../xsltproc_win32/xsltproc.exe</executable>+
    +<commandlineArgs>-o target/application.html+
    src/main/doc/wadl_documentation.xsl
    target/classes/application.wadl</commandlineArgs>
    +</configuration>+
    +</execution>+
    +</executions>+
    +</plugin>+
    +</plugins>+
    +</build>+
    +</profile>+
    +</profiles>+
    +<pluginRepositories>+
    +<pluginRepository>+
    +<id>maven2-repository.dev.java.net</id>+
    +<name>Java.net Repository for Maven</name>+
    +<url>http://download.java.net/maven/2/</url>+
    +<layout>default</layout>+
    +</pluginRepository>+
    +<pluginRepository>+
    +<id>maven-repository.dev.java.net</id>+
    +<name>Java.net Maven 1 Repository (legacy)</name>+
    +<url>http://download.java.net/maven/1</url>+
    +<layout>legacy</layout>+
    +</pluginRepository>+
    +</pluginRepositories>+
    +<repositories>+
    +<repository>+
    +<id>maven2-repository.dev.java.net</id>+
    +<name>Java.net Repository for Maven</name>+
    +<url>http://download.java.net/maven/2/</url>+
    +<layout>default</layout>+
    +</repository>+
    +<repository>+
    +<id>maven-repository.dev.java.net</id>+
    +<name>Java.net Maven 1 Repository (legacy)</name>+
    +<url>http://download.java.net/maven/1</url>+
    +<layout>legacy</layout>+
    +</repository>+
    +<repository>+
    +<id>glassfish-repository</id>+
    +<name>Java.net Repository for Glassfish</name>+
    +<url>http://download.java.net/maven/glassfish</url>+
    +</repository>+
    +</repositories>+
    +</project>+
    Can anyonr contribute?

  • Problem with vista and 5.1

    problem with vista and 5. i install my old audigy 2 zs exp pro with DTT2500 speaker
    In my new pc.
    i install vista 64 and SBAX_PCDRV_LB_2_8_000 driver from creative site.
    when i go to control panel/sound and test the 5. surrund ' iget only the two front speaker.
    why is that?
    i try to play a song from vista folder "Distance" and i get all 5 +sub to play.
    do i miss something?
    is the test worg and with another test i can get all spedajer to work or the driver is not good?
    thanks for all you help
    last update...
    i can get 4 speaker when i use the fourpoint mode on the desktop theather 5. dtt2500 digital,
    but in movie mode i get only 2 front speaker.
    i use the digital out from the sound blaster.
    Message Edited by raflevi on 05-4-2009 02:38 [email protected]

    My apologies about not explaining further about disabling SPDIF passthrough. See the steps below to enable DDL encoding.
    ***Before proceeding please make sure that you've purchased, installed and activated the DDL pack***
    . Open Creative Audio Console, go to the Decoder tab to disable driver level encoding and enable SPDIF passthrough (this is done by selecting SPDIF passthrough or any similar option that enable the use of an external decoder) instead of using the built-in decoders.
    2. Open up your playback devices window (right click on the speaker icon on the taskbar and select playback devices) and set analog speakers (not SPDIF) as your default device. This is VERY IMPORTANT step, or else you get the "the device is busy" error when enbaling DDL encoding.
    3. In the Audio Console, select the Encoder tab and enable DLL encoding.
    Note:
    When DDL encoding is enabled, it makes exclusi've use of your SPDIF connection so, no passthrough is possible. The default output format when using DDL encoding is 48KHz/6 bits. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) when DLL encoding is enabled, then please change their output device to analog speakers instead of SPDIF.
    To use back SPDIF passthrough (when playing back media with a pre-encoded audio source), open up Audio Console and disable DDL encoding and in the Playback Devices window change the default device to SPDIF. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) then please change their output device back to SPDIF. You may also wish to change back your output format to 92KHz/24 bits (right click on SPDIF and select properties -> Advanced tab).
    raflevi wrote:
    when you said to install ddl? pack you mean the "[url="http://buy.soundblaster.com/_creativelabsstore/cgi-bin/pd.cgi?page=product_detail&category=Software&pid=F 2222SR6PAKH5DGY6SD">Dolby Digital Li've Pack - SB Audigy Series[/url] "?
    thanks again for all your help.
    i wanted to use the 5. function mostly for games
    Yes... also please see the link in my previous post.
    Hope this answers your questions.

Maybe you are looking for